Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Third body (8)
- Tribofilm (8)
- Sliding simulation (6)
- Movable cellular automata (5)
- Friction (4)
- Automotive braking (3)
- Dry friction (3)
- MCA-modelling (3)
- Mechanically mixed layer (3)
- Nanocomposite (3)
- Friction layer (2)
- Hybrid composite (2)
- MCA-modeling (2)
- Modelling (2)
- Molecular dynamics (2)
- Pin-on-disc test (2)
- Polymer matrix composite (2)
- Silica nanoparticles (2)
- Additive manufacturing (1)
- Amorphous silica (1)
- Automotive Brakes (1)
- Automotive brake system (1)
- Ball milling (1)
- Biomaterials (1)
- Brake disc (1)
- Brake pad (1)
- Brake pad formulation (1)
- Bremse (1)
- Carbon fibers (1)
- Coefficient of friction (1)
- Cold-welding (1)
- Composite material (1)
- Computational mechanics (1)
- Computer simulation (1)
- Copper (1)
- Copper particles (1)
- Cross-sectional TEM (1)
- Dritter Körper (1)
- Dry sliding (1)
- Dynamic Modelling (1)
- Electrical connectors (1)
- Electro-plated nickel coatings (1)
- Electroless Ni-P (1)
- Friction Mechanisms (1)
- Friction control (1)
- Friction film (1)
- Friction films (1)
- Friction materials (1)
- Friction-induced vibrations (1)
- Laser methods (1)
- Laser powder bed fusion (1)
- Lattice (1)
- Local structural transformations (1)
- MCA model (1)
- MCA-model (1)
- Mechanically Mixed Layer (1)
- Method of movable cellular automata (1)
- Modeling (1)
- Modellierung (1)
- Movable Cellular Automata (1)
- Nanocharakterisierung (1)
- Nanoparticles (1)
- Nanostructure (1)
- Nanostructured powder (1)
- Nanotribology (1)
- Noise propensity (1)
- Numerical simulation (1)
- Powder methods (1)
- Primary contact (1)
- Raman spectroscopy (1)
- Raw materials (1)
- Reibung (1)
- Resistance stress (1)
- Silica nanoparticle (1)
- Silicone oil residue (1)
- Simulation (1)
- Sliding behaviour (1)
- Solid lubricant (1)
- Stress-strain behavior (1)
- Stressstrain behavior (1)
- TEM (1)
- Thin tribofilm (1)
- Ti-Nb alloy (1)
- Tribological properties (1)
- Tribooxidation (1)
- Ultra-mild wear (1)
- Verschleiß (1)
- Wear (1)
- amorphous carbon film (1)
- amorphous silica film (1)
- dry friction (1)
- molecular dynamics (1)
- sliding simulation (1)
Organisationseinheit der BAM
Does ultra-mild wear play any role for dry friction applications, such as automotive braking?
(2012)
Nanostructured third body films and/or storage of wear debris at the surfaces of the first bodies are deemed as prerequisites of sliding under ultra-mild wear conditions. Since such features have been observed experimentally on brake pads and discs, attempts were undertaken to study their sliding behaviour by modelling on the nanoscopic scale with an approach based on Movable Cellular Automata (MCA). The model rendered the possibility to study the influence of different nanostructures systematically and to assess the impact of different brake pad ingredients on the sliding behaviour, velocity accommodation and friction force stabilization at a sliding contact. Besides providing a review on previously published modelling results, some additional new graphs enabling better visualization of dynamic processes are presented. Although ultra-mild wear conditions were considered to be essential for achieving the desired tribological properties, transitions to mesoscopic and macroscopic wear mechanisms were studied as well. The final conclusion is that ultra-mild wear and corresponding smooth sliding behaviour play an important role during automotive braking, even though temporarily and locally events of severe wear may cause friction instabilities, surface damage and release of coarse wear particles.
The tribological properties of nanostructured surface films formed during dry sliding, for example during
automotive braking, were determined by modelling using the method of movable cellular automata.
Starting from a basic model structure, consisting of magnetite with 13% graphite inclusions, the impact of
additional soft and hard particles of different size and volume fraction was studied systematically. It was
revealed that agglomerates of soft particles decomposed and finally mixed with the oxide in the same
way as single nanoparticles. On the other hand, agglomerates of hard particles mixed with the other
components without decomposing. Whereas increasing the amount of soft components in the third body
lowered the coefficient of friction, the opposite occurred with the hard particles. The boundary conditions
for obtaining smooth sliding conditions with minor fluctuations between friction forces at successive time
steps could be defined. In addition to features of the nanostructure, the applied normal pressure
impacted modelling results. Within the parameter range of smooth sliding behaviour, increasing pressure
induced thicker granular interface layers, which lead to a slight decrease of the coefficient of friction.
Changing the amount of soft or hard particles did not change this pressure dependency but only the
friction level.
The composition and nanostructure of a beneficial tribofilm formed during sliding of a hybrid nanocomposite against steel were characterized comprehensively. A similar nanostructure was produced by high energy ball milling of the three identified tribofilm constituents: silica, hematite and graphite. By supplying powders to a pin-on-disc test it has been shown that neither silica, nor hematite, nor a mixture of both provide the low coefficient of friction (COF) observed for the hybrid composite. Only if graphite was blended with the oxides, the low COF was obtained. Thus, a film of finely dispersed stable inorganic wear products containing 15 vol% graphite provides low friction and wear in the considered case.
Excellent tribological properties of an advanced polymer matrix composite were obtained by a combination of micro- and nano-sized fillers. Surface features and the nanostructure of tribofilms were characterized by advanced microscopic techniques, and correlated with the macroscopic behavior in terms of wear rate and friction evolution. A model based on movable cellular automata was applied for obtaining a better understanding of the sliding behavior of the nanostructured tribofilms. The failure of the conventional composite without silica nanoparticles could be attributed to severe oxidational wear after degradation of an initially formed polymer transfer film. The hybrid composite preserves its antiwear and antifriction properties because flash temperatures at micron-sized carbon fibers, lead to polymer degradation and subsequent release of nanoparticles. It has been shown that the released particles are mixed with other wear products and form stable films at the disc surface thus preventing further severe oxidational wear. Furthermore, the released wear product also is embedding carbon fibers at the composite surface thus preventing fiber fragmentation and subsequent third body abrasion. With nanoscale modelling we were able to show that low friction and wear can be expected if the nanostructured silica films contain at least 10 vol.% of a soft ingredient.
A modified pin-on-disc test was applied to determine tribological properties of typical brake pad constituents. Ball-milling of these ingredients together with iron oxide and graphite provided model materials displaying the main features of real third bodies. Solid lubricants like graphite affected the friction and wear behaviour of Fe3O4 powders considerably whereas further addition of hard nanoparticles induced only minor effects. This was corroborated by comparison with modelling results. MoS2 played a dual role. Depending on special conditions, this ingredient either reduced or increased friction. The latter could be explained, after nanoscopic characterization, by oxidation and destruction of the wear-protecting tribofilm.
In the paper by using molecular dynamics method we investigate behavior of nickel-phosphorus compound in amorphous-like state under conditions of shear loading at the constant velocity. Samples with an amorphous layer of pure nickel and nickel-phosphorus compound were considered. The analysis showed that forces of shear resistance in the sample with an amorphous layer containing phosphorus in about 3 times less than the sample with a layer of pure nickel. Thus, it was shown that nickel-phosphorous coating in amorphous-like state may exhibit low friction properties, and, therefore, serve as the solid lubricant material.
In the mechanical friction and wear process, normal and tangential (shear) forces cause elastic and plastic deformations, generate cracks and form loose wear particles through fracture processes. Depending on the working conditions, the material properties and the real contact Situation (topography), a third body is formed as a mechanical ly mixed layer, which determines different running-in and steady-state behaviours.
Two dimensional (2D) MCA Simulation results will be described via empirical equations, which are related to the incubation time (period without wear) and the following running-in wear rate (kinetic concept of strength, fatigue wear model).
In order to understand the running-in and steady-state wear, kinetic model equations for mass balance of the third body are useful and are therefore to be included in the investigation.
For a more complex material behaviour, numerical Simulation results are also presented for friction at the pad-disk interface of automotive brakes.
The additive manufacturing of low elastic modulus alloys that have a certain level of porosity for biomedical needs is a growing area of research. Here, we show the results of manufacturing of porous and dense samples by a laser powder bed fusion (LPBF) of Ti-Nb alloy, using two distinctive fusion strategies. The nanostructured Ti-Nb alloy powders were produced by mechanical alloying and have a nanostructured state with nanosized grains up to 90 nm. The manufactured porous samples have pronounced open porosity and advanced roughness, contrary to dense samples with a relatively smooth surface profile. The structure of both types of samples after LPBF is formed by uniaxial grains having micro- and nanosized features. The inner structure of the porous samples is comprised of an open interconnected system of pores. The volume fraction of isolated porosity is 2 vol. % and the total porosity is 20 vol. %. Cell viability was assessed in vitro for 3 and 7 days using the MG63 cell line. With longer culture periods, cells showed an increased cell density over the entire surface of a porous Ti-Nb sample. Both types of samples are not cytotoxic and could be used for further in vivo studies.