Filtern
Dokumenttyp
- Zeitschriftenartikel (3)
- Vortrag (1)
Sprache
- Englisch (4)
Schlagworte
- Microplastic (4) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
The worldwide produced plastic amount was about 314 m tones in 2013. A content of about 5-12 m tones of plastic products is estimated to attain to the environment. There, they are exposed to environmental aging conditions like UV light, abrasion, water, oxidation etc. and degrade to small particles. If the particles reach a dimension < 5 mm they are called microplastic. Today microplastic is almost ubiquitary and was found in the aquatic as well as in the terrestrial environment. The main representatives are polyethylene (PE), polypropylene (PP), polystyrene (PS) and polyethylene terephthalat (PET).
Analyzing microplastics in environmental samples turned out to be very challenging, due to the fact that there are only a few synthetic particles beside a huge number of natural. Furthermore, the different polymers particles vary in their shape, their density and their chemical characteristics. Until now, there is no standard procedure for sampling, concentration and analyzing. We developed a thermal decomposition method for analyzing micro plastics in environmental samples. The method is a combination of a thermal extraction on solid-phase adsorption agents with a subsequent analysis of the decomposition products by thermal desorption gas chromatography mass spectrometry. In contrast to more established methods, such as IR or Ramen spectroscopy, our method enables measurements within few hours and gives an integration result of polymer specific decomposition products. Therefore, it is possible to identify and to quantify polymers in environmental matrices.
The use of the method is demonstrated for various polymers (PE, PP, PS, PET) in spiked and first time also in real environmental samples.
Small polymer particles with a diameter of less than 5 mm called microplastics find their way into the environment from polymer debris and industrial production. Therefore a method is needed to identify and quantify microplastics in various environmental samples to generate reliable concentration values. Such concentration values, i.e. quantitative results, are necessary for an assessment of microplastic in environmental media. This was achieved by thermal extraction in thermogravimetric analysis (TGA), connected to a solid-phase adsorber. These adsorbers were subsequently analysed by thermal desorption gas chromatography mass spectrometry (TDS-GC-MS). In comparison to other chromatographic methods, like pyrolyse gas chromatography mass spectrometry (Py-GC-MS), the relatively high sample masses in TGA (about 200 times higher than used in Py-GC-MS) analysed here enable the measurement of complex matrices that are not homogenous on a small scale. Through the characteristic decomposition products known for every kind of polymer it is possible to identify and even to quantify polymer particles in various matrices. Polyethylene (PE), one of the most important representatives for microplastics, was chosen as an example for identification and quantification.
Analysis of microplastic particles (MP) in environmental samples needs sophisticated techniques and is time intensive due to sample preparation and detection. An alternative to the most common (micro ) spectroscopic techniques, FTIR or Raman spectroscopy, are the thermoanalytical methods, where specific decomposition products can be analyzed as marker compounds for different kind of plastics types and mass contents. Thermal extraction desorption gas chromatography mass spectrometry (TED-GC-MS) allows the fast identification and quantification of MP in environmental samples without sample preparation. Whereas up to now only the analysis of thermoplastic polymers was realized, this is the first time that even the analysis of tire wear (TW) content in environmental samples is possible. Various marker compounds for TW were identified. They include characteristic decomposition products of elastomers, antioxidants and vulcanization agents. Advantages and drawbacks of these marker substances were evaluated. Environmental samples from street run off were exemplarily investigated and presented.
n order to determine the relevance of microplastic particles in various environmental media, comprehensive investigations are needed. However, no analytical method exists for fast identification and quantification. At present, optical spectroscopy methods like IR and RAMAN imaging are used. Due to their time consuming procedures and uncertain extrapolation, reliable monitoring is difficult. For analyzing polymers Py-GC-MS is a standard method. However, due to a limited sample amount of about 0.5 mg it is not suited for analysis of complex sample mixtures like environmental samples. Therefore, we developed a new thermoanalytical method as a first step for identifying microplastics in environmental samples. A sample amount of about 20 mg, which assures the homogeneity of the sample, is subjected to complete thermal decomposition. The specific degradation products of the respective polymer are adsorbed on a solid-phase adsorber and subsequently analyzed by thermal desorption gas chromatography mass spectrometry. For certain identification, the specific degradation products for the respective polymer were selected first. Afterwards real environmental samples from the aquatic (three different rivers) and the terrestrial (bio gas plant) systems were screened for microplastics. Mainly polypropylene (PP), polyethylene (PE) and polystyrene (PS) were identified for the samples from the bio gas plant and PE and PS from the rivers. However, this was only the first step and quantification measurements will follow.