Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (2)
- Vortrag (1)
Sprache
- Englisch (3)
Referierte Publikation
- nein (3)
Schlagworte
- Rail inspection (3) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
Non-destructive testing for surface crack detection and head check depth quantification at the gauge corner of railway tracks can be achieved using eddy current methods. With the extension of the tested zone to the running surface, rail defect signal types other than head checks can be measured. Due to their mostly irregular shape, a quantitation based on a calibration against regular test cracks of varying depth may not be linear. Estimates of the expected influence of more complex crack patterns may be obtained by a finite element simulation of sufficiently simple limiting cases, like two displaced or intersecting cracks or a simply branched or flexed crack. As a first step, a 3D finite element model of the HC10 eddy current probe distributed by Prüftechnik Linke und Rühe (PLR), Germany was built and verified against measured results from an (easily fabricated) reference block with isolated long cracks.
Since 1999 there has been a continuous development of non-destructive head check inspection. Especially in case of modern rail inspection systems, high demands on a fast, detailed detection and classification of defects called for improved testing methods. Due to the large amount of different rail types and profiles, the adaptation and optimization of algorithms is still in progress. Additional data analysis is under devel-opment for combined eddy current and ultrasonic inspection methods. This presentation gives an over-view of further enhancement and linking of testing systems as well as data processing. Main foci of the development are an improved sensitivity and an increased reliability of the testing results. Also, additional information can be obtained like determination of local hardness and roughness of the rail as well as an enhanced resolution for locating of defects which will be part of the presented work.
Since 1999 there has been a continuous development of non-destructive head check inspection. Especially in case of modern rail inspection systems, high demands on a fast, detailed detection and classification of defects called for improved testing methods. Due to the large amount of different rail types and profiles, the adaptation and optimization of algorithms is still in progress. Additional data analysis is under devel-opment for combined eddy current and ultrasonic inspection methods. This presentation gives an over-view of further enhancement and linking of testing systems as well as data processing. Main foci of the development are an improved sensitivity and an increased reliability of the testing results. Also, addi-tional information can be obtained like determination of local hardness and roughness of the rail as well as an enhanced resolution for locating of defects which will be part of the presented work.