Filtern
Dokumenttyp
- Zeitschriftenartikel (6) (entfernen)
Schlagworte
- Druckgefäße (1)
- Fire safety composite tanks (1)
- Fire testing (1)
- Flaschen (1)
- Flüssiggas (1)
- Gefahrgut (1)
- Gefahrguttransport (1)
- JetFire (1)
- Jetfire (1)
- Prüfstand (1)
Organisationseinheit der BAM
In internationalen Normen und Regelwerken werden zur Überprüfung der thermischen Belastbarkeit von Umschließungen für gefährliche Güter Versuche vorgeschrieben, die u. a. Vorgaben hinsichtlich der Wärmebelastung enthalten. Diese Vorgaben beziehen sich i. d. R. auf ein Kerosin- oder Heizölfeuer, denen die Gefahrgutumschließungen ausgesetzt werden müssen. Versuche mit diesen Medien belasten jedoch die Umwelt in einem heute nicht mehr tragbaren Umfang. Als alternatives Medium bietet sich verflüssigtes Propangemisch (LPG) an. Zur Ermittlung eines äquivalenten Wärmeeintrags mussten vergleichende Versuche durchgeführt werden. Hierzu hat die BAM Bundesanstalt für Materialforschung und -Prüfung neue Brandprüfstände entwickelt und die nachfolgend beschriebenen Untersuchungen durchgeführt.
Fire testing is an essential part of the hypothetical, cumulative mechanical and thermal accident test conditions that shall guarantee package safety in severe accidents. Not only for radioactive material transport packages but also for other containments of dangerous goods, international standards require specific thermal load specifications. Following the guideline Safety in technology and chemistry' BAM, as a scientific and technical German federal government institute, operates a 12 km² large open air test facility for experimental investigations of dangerous goods and their containments. On an area beside the well-known 200-ton drop test facility, BAM has put into operation a new fire test facility. This facility provides two fire test stands that utilise liquid propane as fuel from a central, earth-covered 60m³ LPG storage tank. From that storage the propane is pumped via pipelines to the test stands where the gas is released from nozzles, and ignited by ignition burners. The fire exposure test facility areas are 12×8 m. Fire test facility B (with gas release nozzles submerged in a water pool) is designed for fire testing of containers that may burst during the test. Fire test facility A (with ring burner systems) is designed for heavy test objects up to 200 tons, e.g. for full-scale spent fuel casks. This paper presents a detailed description of the facility, insight into first tests performed, and results of calorimeter fire tests, using containers of various sizes, to verify the absorbed heat fluxes, demonstrating that regulatory fire test conditions are met, and that the propane fire is equivalent to a kerosene or heating oil pool fire.
Neben herkömmlichen Stahlflaschen, die seit Jahrzehnten in fast unveränderter Bauform für Flüssiggase (Propan-Butan-Gemische) eingesetzt werden, etablieren sich immer mehr Flaschen aus Faserverbundwerkstoffen (GFK) mit einer geringeren Masse. Die Bundesanstalt für Materialforschung und -prüfung (BAM) wurde beauftragt, das Verhalten dieser Gasflaschen unter den extremen Bedingungen eines Unfallfeuers zu untersuchen. In einem Brandprüfstand der BAM auf dem Testgelände Technische Sicherheit (TTS) in Horstwalde wurden deshalb beide Typen von Propangasflaschen einem simulierten Unfallfeuer ausgesetzt.
Die BAM – Bundesanstalt für Materialforschung und -prüfung führt schon seit vielen Jahren auf zwei Brand- prüfständen Brandprüfungen z.B. an Transport- und Lagerbehältern für radioaktive Stoffe oder zur Prüfung von Brandschutzbeschichtungen durch. Als Brandmedium wird auf diesen Prüfständen Flüssiggas (Propan- Butan-Gemisch C) eingesetzt, mit dem die Prüfobjekte simulierten Unfallfeuern ausgesetzt werden. Mit dem neuen Jetfire – Prüfstand der BAM können seit Anfang 2018 diverse Belastungsszenarien nach den Anforde- rungen der ISO22899-1:2007 [1] simuliert werden.
To save weight and resources lightweight tanks with complex geometries made of glass-fibre reinforced plastics (GFRP) are a promising innovation for the transportation of dangerous goods. To realise the use of polymer tanks for such applications, their fire safety must be guaranteed. This paper presents solutions to protect fibre-reinforced plastic tanks from fire. The fire resistance of six GFRP tanks with different fire protection systems was tested in an outdoor full-scale fire test facility according to the regulation stipulated in the ADR (European agreement concerning the national carriage of dangerous goods by road). All tanks feature a complex geometry and a holding capacity of 1100 litres. The fire protection systems are composed of specialised resins as well as two intumescent coatings. All systems had a protective impact. The best results were achieved by the epoxy based intumescent coating, which was able to prolong the time needed to reach 150 °C inside the tank by 20 min. The emergence of a temperature holding point inside the tank due to condensation effects was observed at temperatures around 100 °C.
Seit zehn Jahren führt die Bundesanstalt für Materialforschung und -prüfung (kurz: BAM) auf zwei Prüfständen Brandprüfungen z. B. an Transport-und Lagerbehältern für radioaktive Stoffe oder zur Prüfung von Brandschutzbeschichtungen durch. Als Brandmedium wird Flüssiggas (Propan-Butan-Gemisch C) eingesetzt, mit dem die Prüfobjekte simulierten Unfallfeuern ausgesetzt werden. Seit Anfang 2018 verfügt die BAM darüber hinaus auch über einen Jetfire-Prüfstand, der die Anforderungen der ISO 22899-1:2007 1) erfüllt.