Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (129) (entfernen)
Sprache
- Englisch (129)
Schlagworte
- Laser-induced periodic surface structures (LIPSS) (36)
- Femtosecond laser ablation (24)
- Femtosecond laser (16)
- Laser processing (12)
- Laser ablation (11)
- Silicon (10)
- Surface functionalization (9)
- Nanostructures (7)
- Friction (6)
- High-speed optical techniques (6)
- Laser beam effects (6)
- Radiation protection (6)
- Wear (6)
- Femtosecond laser processing (5)
- Laser-induced periodic surface structures (5)
- Silicon compounds (5)
- Steel (5)
- Tribology (5)
- Applications (4)
- Double-pulse experiments (4)
- Indium phosphide (4)
- Oxidation (4)
- Raman spectroscopy (4)
- Ultrafast optical techniques (4)
- Ablation (3)
- Atomic force microscopy (3)
- Chalcopyrite (3)
- Dielectrics (3)
- Laser-induced X-ray emission (3)
- Laser-induced periodic surface structures, LIPSS (3)
- Mach-Zehnder interferometer (3)
- Microstructures (3)
- Polycarbonate (3)
- Refractive index (3)
- Surface morphology (3)
- Surface structure (3)
- Titanium (3)
- Ultrashort laser pulses (3)
- Ultrashort pulsed laser (3)
- XANES (3)
- Anodization (2)
- Biofilms (2)
- Cell adhesion (2)
- Damage threshold (2)
- Direct laser interference patterning (DLIP) (2)
- Elemental semiconductors (2)
- Femtosecond laser patterning (2)
- Fluid transport (2)
- Fused silica (2)
- Glass (2)
- Glasses (2)
- Laser (2)
- Laser-induced oxide layer (2)
- Laser-induced x-ray emission (2)
- Light concentration (2)
- Magnesium compounds (2)
- Micro solar cells (2)
- Micro-concentrator solar cell (2)
- Nanosecond laser (2)
- Niobium (2)
- Optical breakdown (2)
- Optical properties (2)
- Pacemaker (2)
- Photovoltaics (2)
- Polaritons (2)
- Potassium compounds (2)
- Scanning electron microscopy (2)
- Scanning force microscopy (2)
- Semiconductor (2)
- Surface modification (2)
- Surface plasmon polaritons (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Time-resolved measurements (2)
- Titanium alloy (2)
- Titanium nitride (2)
- Ultrashort laser material interaction (2)
- (LIPSS) (1)
- 532 nm wavelength (1)
- ASTM (1)
- Ab initio calculations (1)
- Absorber optimization (1)
- Additives (1)
- Advanced applications (1)
- Aluminium (1)
- Amorphization (1)
- Analysis (1)
- Anodic oxidation (1)
- Antibacterial surfaces (1)
- Auger electron spectroscopy (1)
- Bacterial adhesion (1)
- Bariumalumoborosilicate glass (1)
- Biofilm (1)
- Biofilm formation (1)
- Bioinspiration (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Bond lengths (1)
- Bone screws (1)
- Bug (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- CIGSe (1)
- CIGSe micro solar cells (1)
- Calamistrum (1)
- Capillary waves (1)
- Carbon fibers (1)
- Carrier plasmas (1)
- Cell appendages (1)
- Cell-repellent surfaces (1)
- Ceramic matrix composites (1)
- Chemical analysis (1)
- Conduction bands (1)
- Copper-indium-gallium-diselenide (1)
- Cribellate spiders (1)
- Crystallization (1)
- CuInSe2 (1)
- D7755-11 (1)
- Darkfield microscopy (1)
- Debris (1)
- Dentistry (1)
- Diffusion (1)
- Direct laser interference patterning (1)
- Drude model (1)
- EDX (1)
- Editorial (1)
- Electrochemical treatment (1)
- Electromagnetic scattering (1)
- Electromagnetic theories (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron microscopy (1)
- Electrospinning (1)
- European funding strategies (1)
- F pili (1)
- FS-laser ablation (1)
- Femtosecond laser irradiation (1)
- Femtosecond laser pulse (1)
- Femtosecond laser-processing (1)
- Fluid-flow (1)
- Fourier transforms (1)
- Free electron laser (1)
- Fs-Laser (1)
- Fs-time resolved microscopy (1)
- Functional properties (1)
- Glass structure (1)
- Grain orientation (1)
- Grating (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Heat affected zone (1)
- Heat diffusion (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical structures (1)
- Implant material (1)
- Indium (1)
- Indium Phosphide (1)
- Indium islands (1)
- Industrial application (1)
- Industrial applications (1)
- LIFT (1)
- LIPSS (1)
- Large area structuring (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser damage (1)
- Laser induced periodic surface structures (1)
- Laser materials-processing applications (1)
- Laser radiation effects (1)
- Laser scanning microscopy (1)
- Laser scribing (1)
- Laser-induced forward transfer (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-modified surface (1)
- Light transmission (1)
- Literature survey (1)
- Lizard (1)
- Material sciences (1)
- Matter reorganization theories (1)
- Medical implants (1)
- Melting (1)
- Metals (1)
- Michelson interferometer (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Microscopy (1)
- Microstructure (1)
- Modelling (1)
- Molybdenum substrate (1)
- Monochromators (1)
- Nanofibers (1)
- Nanosecond laser ablation (1)
- Nanosecond laser irradiation (1)
- Nanostructuring (1)
- Neodymium (1)
- Ophthalmology (1)
- Optical coatings (1)
- Optical harmonic generation (1)
- Optical microscopy (1)
- Optical pulse shaping (1)
- Phase mask (1)
- Phase-contrast microscopy (1)
- Photoelektron spectroscopy (1)
- Physical vapor deposition (1)
- Picosecond (1)
- Plasma formation (1)
- Plasma processing (1)
- Polarisation (1)
- Polyethylene (1)
- Polyethylene terephthalate (1)
- Polyimide (1)
- Polymer (1)
- Polymethylmethacrylate (1)
- Potassium-magnesium silicate glass (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Pulse shaping (1)
- Pump-probe experiments (1)
- Reflectivity measurements (1)
- Refractive index engineering (1)
- SEM (1)
- Sapphire (1)
- Scanning Auger electron microscopy (1)
- Scanning Force Microscopy (1)
- Scattering (1)
- Second-generation high temperature superconductor technology (1)
- Secondary hazard (1)
- Self-induced transparency (1)
- Self-organization (1)
- Semiconductor materials (1)
- Semiconductors (1)
- Silica (1)
- Silicate glasses (1)
- Silicon nitride (1)
- Silicon oxide (1)
- Sliding (1)
- Solar cell (1)
- Solid lasers (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Structural relaxation (1)
- Superconductivity (1)
- Surface (1)
- Surface chemistry (1)
- Surface plasmon polariton (1)
- Surface processing (1)
- Surface reflectivity (1)
- Surface structures (1)
- Surface superconductivity (1)
- TeO2 (1)
- Tellurium dioxide crystals (1)
- Thin films (1)
- Thin-film solar cells (1)
- Threshold of silicon (1)
- Ti6Al4V alloys (1)
- Time-of-flight mass spectroscopy (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved microscopy (1)
- Time-resolved scattering (1)
- Titanium alloys (1)
- Titanium nitride films (1)
- Transmission electron microscopy (1)
- Transmission measurements (1)
- Ultra-short pulse laser processing (1)
- Ultrafast laser excitation (1)
- Ultrafast microscopy (1)
- Ultrafast optics (1)
- Ultrashort laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- X-ray (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrum (1)
- lossy materials (1)
- plasmon lifetime (1)
- second laser (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (52)
- 6.2 Material- und Oberflächentechnologien (52)
- 9 Komponentensicherheit (7)
- 9.5 Tribologie und Verschleißschutz (7)
- 6.7 Materialsynthese und Design (4)
- 4 Material und Umwelt (3)
- 4.1 Biologische Materialschädigung und Referenzorganismen (3)
- 6.1 Oberflächen- und Dünnschichtanalyse (2)
- 6.6 Physik und chemische Analytik der Polymere (2)
- 5 Werkstofftechnik (1)
Paper des Monats
- ja (1)
Ultrafast laser processing can be used to realize various morphological surface transformations, ranging from direct contour shaping to large-area-surface functionalization via the generation of “self-ordered” micro- and nanostructures as well as their hierarchical hybrids. Irradiation with high-intensity laser pulses excites materials into extreme conditions, which then return to equilibrium through these unique surface transformations. In combination with suitable top-down or bottom-up manufacturing strategies, such laser-tailored surface morphologies open up new avenues toward the control of optical, chemical, and mechanical surface properties, featuring various technical applications especially in the fields of photovoltaics, tribology, and medicine. This article reviews recent efforts in the fundamental understanding of the formation of laser-induced surface micro- and nanostructures and discusses some of their emerging capabilities.
Modeling of silicon surface topographies induced by single nanosecond laser pulse induced melt-flows
(2019)
Irradiation with a single nanosecond laser pulse in the melting regime can result in a characteristic change in the surface morphology of crystalline silicon. This has been verified experimentally in a variety of situations, where dimple-shaped surface topographies are produced. In this work, the dimple height, depth, and width are modeled following and extending in a more rigorous manner the approach of Wood and Giles [Phys. Rev. B 23, 2923–2942 (1981)] and that of Schwarz-Selinger and coworkers [Phys. Rev. B 64, 155323 (2001)], upon varying the laser irradiation parameters such as peak energy density, pulse duration, and wavelength. This is achieved with numerical simulations of one-dimensional heat flow as input to the analytical fluid-flow equations.
Irradiation with a single spatially Gaussian-shaped nanosecond laser pulse in the melting regime can result in a characteristic annular change in the surface morphology of crystalline silicon. This has been verified experimentally in a variety of situations, where dimple-shaped surface topographies are produced. In a recent work we have investigated the induced changes in the surface topography upon exposure to wavelengths in the visible and near infrared spectral region. Irradiation in the UV requires a more detailed analysis due to the enhanced absorption of the material. In the present analysis, we determine under which conditions our previous model can be used and the corresponding results are presented.
Single-pulse femtosecond laser-induced forward transfer (LIFT, 30 fs, 790 nm) is used to deposit micron-sized dots of copper and/or indium onto a molybdenum layer on glass. Such systems can serve as precursors for the bottom-up manufacturing of micro-concentrator solar cells based on copper-indium-gallium-diselenide. The influence of the thickness of the copper, indium and combined copper-indium donor layers on the quality of the transferred dots was qualified by scanning electron microscopy, energy-dispersive X-ray analysis, and optical microscopy. The potential for manufacturing of a spatial arrangement adapted to the geometry of micro-lens arrays needed for micro-concentrator solar cells is demonstrated.
Some applications of polymer films require the microstructuring of partly uneven substrates. This cannot be achieved by conventional photolithography, usually performed with ultraviolet short-pulse lasers (excimer, fourth harmonic Nd:YAG). When processing thermally sensitive or undoped polymers with low optical absorption, the use of femtosecond laser pulses can improve the ablation precision, also reducing the heat-affected zone. Therefore, a Ti:sapphire laser system was employed to perform ablation experiments on polyimide (PI). The irradiated areas were evaluated by means of optical and scanning electron microscopy. Highly oriented ripple structures, which are related to the polarization state of the laser pulses, were observed in the cavities. The relationship between the ablation threshold fluence and the number of laser pulses applied to the same spot is described in accordance with an incubation model.
Ablation experiments with ultrashort laser pulses (pulse duration 150 fs, wavelength 800 nm) on polymers (PC, PMMA) relevant for biomedical technology have been performed in air. The lateral and vertical machining precision was evaluated by optical, atomic force and scanning electron microscopy. The ablation threshold reaches values in the range of 0.52.5 J/cm2 and depends significantly on the number of laser pulses applied to the same spot. The hole diameters are influenced by the laser fluence and the number of laser pulses. The relation between the ablation threshold and the number of laser pulses applied to the same spot is described in accordance with an incubation model.
Single-pulse femtosecond (fs) (pulse duration ~200 fs, wavelength 398 nm) and nanosecond (ns) (pulse duration 4 ns, wavelength 355 nm) laser ablation have been applied in combination with time-of-flight mass spectrometer (TOFMS) to analyze the elemental composition of the plasma plume of single-crystalline telluria (c-TeO2, grown by the balance controlled Czochralski growth method). Due to the three-order difference of the peak intensities of the ns and fs-laser pulses, significant differences were observed regarding the laser-induced species in the plasma plume. Positive singly, doubly and triply charged Te ions (Te+, Te2+, Te3+) in the form of their isotopes were observed in case of both irradiations. In case of the ns-laser ablation the TeO+ formation was negligible compared to the fs case and there was no Te trimer (Te3+) formation observed. It was found that the amplitude of Te ion signals strongly depended on the applied laser pulse energy. Singly charged oxygen ions (O+) are always present as a byproduct in both kinds of laser ablation.
Near-IR femtosecond ( τ = 150 fs, λ = 775 nm, repetition rate 1 kHz) and VUV nanosecond (τ = 20 ns, λ = 157 nm, repetition rate 1 to 5 Hz) laser pulse ablation of single-crystalline TeO2 (c-TeO2, grown by the balance controlled Czochalski growth method) surfaces was performed in air using the direct focusing technique. The multi-method characterization using optical microscopy, atomic force microscopy and scanning electron microscopy revealed the surface morphology of the ablated craters. This allowed us to characterize precisely the lateral and vertical dimensions of the laser-ablated craters for different laser pulse energies and pulse numbers at each spot. Based on the obtained information, we quantitatively determined the ablation threshold fluence for the fs laser irradiation when different pulse numbers were applied to the same spot by using two independent extrapolation techniques. We found that in case of NIR femtosecond laser pulse irradiation, the ablation threshold significantly depends on the number of laser pulses applied to the same spot indicating that incubation effects play an important role in this material. In case of VUV ns laser pulses, the ablation rate is significantly higher due to the high photon energy and the predominantly linear absorption in the material. These results are discussed on the basis of recent models of the interaction of laser pulses with dielectrics.
Femtosecond (fs) laser pulse ablation (pulse duration of 150 fs, wavelength of 775 nm, repetition rate of 1 kHz) of single-crystalline TeO2 surfaces was performed in air using the direct focusing technique. The lateral and vertical dimensions of laser ablated craters as well as the laser damage thresholds were evaluated for different pulse numbers applied to the same spot. The joint observation using optical microscopy, atomic force microscopy and scanning electron microscopy revealed the surface morphology of the ablated craters and also showed that the ablation threshold depends significantly on the number of laser pulses applied to the same spot due to incubation effects. The incubation effects change the absorption processes involved in fs-laser ablation of the transparent material from multiphoton absorption to a single-photon absorption. These results are discussed on the basis of recent models of the interaction of fs-laser pulses with dielectrics.