Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (69) (entfernen)
Sprache
- Englisch (69)
Referierte Publikation
- ja (69) (entfernen)
Schlagworte
- Femtosecond laser ablation (17)
- Laser-induced periodic surface structures (LIPSS) (16)
- Femtosecond laser (10)
- Laser ablation (7)
- Radiation protection (6)
- Silicon (6)
- Laser beam effects (5)
- Laser processing (5)
- Laser-induced periodic surface structures (5)
- Double-pulse experiments (4)
- Friction (4)
- High-speed optical techniques (4)
- Nanostructures (4)
- Steel (4)
- Surface functionalization (4)
- Ultrafast optical techniques (4)
- Femtosecond laser processing (3)
- Laser-induced X-ray emission (3)
- Laser-induced periodic surface structures, LIPSS (3)
- Mach-Zehnder interferometer (3)
- Oxidation (3)
- Silicon compounds (3)
- Surface morphology (3)
- Surface structure (3)
- Titanium (3)
- Tribology (3)
- Ultrashort pulsed laser (3)
- Wear (3)
- Biofilms (2)
- Elemental semiconductors (2)
- Femtosecond laser patterning (2)
- Fluid transport (2)
- Laser-induced x-ray emission (2)
- Micro-concentrator solar cell (2)
- Niobium (2)
- Optical properties (2)
- Photovoltaics (2)
- Polaritons (2)
- Scanning electron microscopy (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Titanium nitride (2)
- Ultrashort laser material interaction (2)
- (LIPSS) (1)
- Ab initio calculations (1)
- Aluminium (1)
- Amorphization (1)
- Anodic oxidation (1)
- Anodization (1)
- Antibacterial surfaces (1)
- Applications (1)
- Atomic force microscopy (1)
- Auger electron spectroscopy (1)
- Bacterial adhesion (1)
- Bariumalumoborosilicate glass (1)
- Biofilm (1)
- Bioinspiration (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Bug (1)
- CIGSe (1)
- CIGSe micro solar cells (1)
- Cell adhesion (1)
- Chalcopyrite (1)
- Conduction bands (1)
- Copper-indium-gallium-diselenide (1)
- Crystallization (1)
- Dentistry (1)
- Dielectrics (1)
- Diffusion (1)
- Editorial (1)
- Electromagnetic scattering (1)
- FS-laser ablation (1)
- Fourier transforms (1)
- Fused silica (1)
- Heat affected zone (1)
- Indium (1)
- Indium islands (1)
- Indium phosphide (1)
- Industrial applications (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser damage (1)
- Laser-induced forward transfer (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced nanostructures (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-modified surface (1)
- Lizard (1)
- Metals (1)
- Michelson interferometer (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Molybdenum substrate (1)
- Ophthalmology (1)
- Optical breakdown (1)
- Optical coatings (1)
- Optical microscopy (1)
- Pacemaker (1)
- Photoelektron spectroscopy (1)
- Physical vapor deposition (1)
- Polarisation (1)
- Polycarbonate (1)
- Polyethylene (1)
- Polymer (1)
- Polymethylmethacrylate (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Refractive index (1)
- Scanning Auger electron microscopy (1)
- Secondary hazard (1)
- Semiconductor (1)
- Semiconductors (1)
- Silica (1)
- Silicon nitride (1)
- Silicon oxide (1)
- Solar cell (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Superconductivity (1)
- Surface plasmon polariton (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface superconductivity (1)
- Thin films (1)
- Threshold of silicon (1)
- Ti6Al4V alloys (1)
- Time-resolved measurements (1)
- Titanium alloy (1)
- Titanium nitride films (1)
- Ultra-short pulse laser processing (1)
- Ultrashort laser pulses (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- X-ray (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrum (1)
- lossy materials (1)
- plasmon lifetime (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (22)
- 6.2 Material- und Oberflächentechnologien (22)
- 6.7 Materialsynthese und Design (3)
- 9 Komponentensicherheit (3)
- 9.5 Tribologie und Verschleißschutz (3)
- 4 Material und Umwelt (2)
- 4.1 Biologische Materialschädigung und Referenzorganismen (2)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
- 6.6 Physik und chemische Analytik der Polymere (1)
Paper des Monats
- ja (2)
Ultrashort pulse laser microstructuring (pulse duration 130 fs, wavelength 800 nm, repetition rate 2 Hz) of titanium nitride (TiN) films on silicon substrates was performed in air using the direct focusing technique. The lateral and vertical precision of laser ablation was evaluated. The TiN ablation threshold changed with the number of pulses applied to the surface due to an incubation effect. An ablation depth per pulse below the penetration depth of light was observed. Columnar structures were formed in the silicon substrate after drilling through the TiN layer.
Ablation experiments with ultrashort laser pulses (pulse duration 150 fs, wavelength 800 nm) on polymers (PC, PMMA) relevant for biomedical technology have been performed in air. The lateral and vertical machining precision was evaluated by optical, atomic force and scanning electron microscopy. The ablation threshold reaches values in the range of 0.52.5 J/cm2 and depends significantly on the number of laser pulses applied to the same spot. The hole diameters are influenced by the laser fluence and the number of laser pulses. The relation between the ablation threshold and the number of laser pulses applied to the same spot is described in accordance with an incubation model.
Ablation of indium phosphide wafers in air was performed with low repetition rate ultrashort laser pulses (130 fs, 10 Hz) of 800 nm wavelength. The relationships between the dimensions of the craters and the ablation parameters were analyzed. The ablation threshold fluence depends on the number of pulses applied to the same spot. The single-pulse ablation threshold value was estimated to be fth(1)=0.16 J/cm2. The dependence of the threshold fluence on the number of laser pulses indicates an incubation effect. Morphological and chemical changes of the ablated regions were characterized by means of scanning electron microscopy and Auger electron spectroscopy.
Laser ablation with femtosecond pulses (130 fs, wavelength 800 nm, repetition rate 2 Hz) was compared with nanosecond-pulse ablation (10 ns, wavelength 266 nm, repetition rate 2.5 Hz) of bariumalumoborosilicate glass in air using the direct focusing technique. Different ablation thresholds and heat-affected zones were observed. The lateral and vertical machining precision was evaluated. Single nanosecond laser pulses in the far UV resulted in a bubble or a circular hole in the centre of the illuminated spot, depending on the applied fluence. The ablation behaviour in the case of near-IR femtosecond pulses contrasted to this. Bubble formation was not detected. It needed repeated pulses at the same spot to modify the surface until material removal could be observed (incubation). Cavity dimensions of less than the beam diameter were achieved in this case.
Multiple pulse investigations of 130-fs Ti:sapphire laser-induced damage of a high reflecting mirror consisting of alternating ?/4-layers of Ta2O5 and SiO2 and a single 500-nm Ta2O5 film were performed. In both cases, fused silica served as the substrate. For a fixed number of 1000 laser pulses per spot, a decrease in the damage threshold fluence of the mirror by a factor of two was observed by changing the repetition rate from 10 Hz to 1 kHz. A single 500-nm Ta2O5 film shows higher damage resistance compared to the mirror. The mirror and the Ta2O5 film samples were partially coated with a 300-nm-thick aluminium layer. The aluminium coating does not influence the damage threshold of the dielectrics underneath.
The formation of laser-induced periodic surface structures (LIPSS) in different materials (metals, semiconductors, and dielectrics) upon irradiation with linearly polarized fs-laser pulses (τ~30–150 fs, λ~800 nm) in air environment is studied experimentally and theoretically. In metals, predominantly low-spatial-frequency-LIPSS with periods close to the laser wavelength λ are observed perpendicular to the polarization. Under specific irradiation conditions, high-spatial-frequency-LIPSS with sub-100-nm spatial periods (~λ/10) can be generated. For semiconductors, the impact of transient changes of the optical properties to the LIPSS periods is analyzed theoretically and experimentally. In dielectrics, the importance of transient excitation stages in the LIPSS formation is demonstrated experimentally using (multiple) double-fs-laser-pulse irradiation sequences. A characteristic decrease of the LIPSS periods is observed for double-pulse delays of less than 2 ps.
The formation of laser-induced periodic surface structures (LIPSS) on two different silica polymorphs (single-crystalline synthetic quartz and commercial fused silica glass) upon irradiation in air with multiple linearly polarized single- and double-fs-laser pulse sequences (τ = 150 fs pulse duration, λ = 800nm center wavelength, temporal pulse separation Δt < 40 ps) is studied experimentally and theoretically. Two distinct types of fs-LIPSS [so-called low-spatial-frequency LIPSS (LSFL) and high-spatial-frequency LIPSS (HSFL)] with different spatial periods and orientations were identified. Their appearance was characterized with respect to the experimental parameters peak laser fluence and number of laser pulses per spot. Additionally, the 'dynamics' of the LIPSS formation was addressed in complementary double-fs-pulse experiments with varying delays, revealing a characteristic change of the LSFL periods. The experimental results are interpreted on the basis of a Sipe-Drude model considering the carrier dependence of the optical properties of fs-laser excited silica. This new approach provides an explanation of the LSFL orientation parallel to the laser beam polarisation in silica—as opposed to the behaviour of most other materials.
The formation of laser-induced periodic surface structures upon irradiation of titanium, silicon, and fused silica with multiple irradiation sequences consisting of parallel polarized Ti:sapphire femtosecond laser pulse pairs (pulse duration 50–150 fs, central wavelength ~800 nm) is studied experimentally. The temporal delay between the individual near-equal energy fs-laser pulses was varied between 0 and 5 ps with a temporal resolution of better than 0.2 ps. The surface morphology of the irradiated surface areas is characterized by means of scanning electron microscopy (SEM). In all materials a decrease of the rippled surface area is observed for increasing delays. The characteristic delay decay scale is quantified and related to material dependent excitation and energy relaxation processes.
The irradiation of ~0.9-µm-thick hydrogenated amorphous carbon (a-C:H) layers deposited on silicon substrates with single femtosecond (fs) laser pulses (35 fs pulse duration, 790 nm centre wavelength) in air is studied experimentally. Irradiation spots have been generated with different peak fluences and subsequently investigated by optical topometry, micro Raman spectroscopy and microscale mechanical indentation in order to evaluate their microscopic, topographical, structural and mechanical properties (e.g. elastic modulus). By this multi-method approach, a clear separation of different effects (delamination and graphitisation) becomes possible. The joint application of mechanical and spectroscopic techniques provides unique insights into the effects of the fs-laser radiation on the carbon layer.
Femtosecond diffraction dynamics of laser-induced periodic surface structures on fused silica
(2013)
The formation of laser-induced periodic surface structures (LIPSS) on fused silica upon irradiation with linearly polarized fs-laser pulses (50 fs pulse duration, 800?nm center wavelength) is studied experimentally using a transillumination femtosecond time-resolved (0.1 ps-1 ns) pump-probe diffraction approach. This allows to reveal the generation dynamics of near-wavelength-sized LIPSS showing a transient diffraction at specific spatial frequencies even before a corresponding permanent surface relief was observed. The results confirm that the ultrafast energy deposition to the materials surface plays a key role and triggers subsequent physical mechanisms such as carrier scattering into self-trapped excitons.