Filtern
Dokumenttyp
- Zeitschriftenartikel (52)
- Vortrag (34)
- Beitrag zu einem Tagungsband (9)
- Buchkapitel (5)
- Posterpräsentation (4)
- Monografie (1)
- Video (1)
Schlagworte
- Laser-induced periodic surface structures (LIPSS) (55)
- Surface functionalization (27)
- Femtosecond laser (21)
- Laser processing (13)
- Femtosecond laser ablation (11)
- Applications (10)
- Laser-induced periodic surface structures, LIPSS (10)
- Radiation protection (9)
- Laser ablation (8)
- Nanostructures (8)
- Laser-induced X-ray emission (7)
- Microstructures (7)
- Oxidation (7)
- Tribology (6)
- Femtosecond laser processing (5)
- Capillary waves (4)
- Electromagnetic scattering (4)
- Friction (4)
- Silicon (4)
- Ultrashort laser material interaction (4)
- Wear (4)
- Chalcopyrite (3)
- Free electron laser (3)
- Hard X-ray photoelectron spectroscopy (HAXPES) (3)
- Industrial applications (3)
- Time-resolved scattering (3)
- Ultrafast laser processing (3)
- Ultrashort laser pulses (3)
- Ultrashort pulsed laser (3)
- Anodization (2)
- Biofilms (2)
- Chemical analysis (2)
- Cribellate spiders (2)
- Direct laser interference patterning (DLIP) (2)
- Finite-difference time-domain calculations (2)
- Laser-induced forward transfer (2)
- Laser-induced oxide layer (2)
- Laser-induced x-ray emission (2)
- Modelling (2)
- Niobium (2)
- Oberflächenfunktionalisierung (2)
- Polycarbonate (2)
- Pump-probe experiments (2)
- Secondary hazard (2)
- Self-organization (2)
- Spectroscopic imaging ellipsometry (2)
- Steel (2)
- Surface modification (2)
- Ti6Al4V alloy (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Titanium (2)
- Ultra-short pulse laser processing (2)
- Ultrashort laser processing (2)
- Ultrashort pulse laser processing (2)
- ASTM (1)
- Additive (1)
- Additives (1)
- Amorphization (1)
- Analysis (1)
- Antiadhesive surfaces (1)
- Antibacterial surfaces (1)
- Antibakterielle Oberflächen (1)
- Antimicrobial (1)
- Atomic force microscopy (1)
- Bacteria (1)
- Bacteria-repellent surfaces (1)
- Bacterial adhesion (1)
- Bacterial adhesion tests (1)
- Bessel-Strahlen (1)
- Biofilm (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilme (1)
- Bioinspiration (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Bionic materials (1)
- Bone screws (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Calamistrum (1)
- Carbon fibers (1)
- Cell appendages (1)
- Cell-repellent surfaces (1)
- Ceramic matrix composites (1)
- Chemical analyses (1)
- Crystallization (1)
- Cu(In,Ga)Se2 (1)
- D7755-11 (1)
- Dentistry (1)
- Direct laser interference patterning (1)
- Editorial (1)
- Electrochemical treatment (1)
- Electromagnetic radiation (1)
- Electromagnetic theories (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron microscopy (1)
- Electrospinning (1)
- European funding strategies (1)
- F pili (1)
- Femtosecond (1)
- Femtosecond laser patterning (1)
- Femtosecond laser-processing (1)
- Femtosekunden-Laserablation (1)
- Fluid-flow (1)
- Force distance curve (1)
- Free electron laser (FEL) (1)
- Fs-Laser (1)
- Fs-laser patterning (1)
- Functional properties (1)
- Glasses (1)
- Glow-discharge optical emission spectroscopy (1)
- Grain orientation (1)
- Grating (1)
- Heat diffusion (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical structures (1)
- Hydrodynamics (1)
- Implant material (1)
- Industrial application (1)
- LIFT (1)
- LIPSS (1)
- Large area structuring (1)
- Laser (1)
- Laser Machining (1)
- Laser damage (1)
- Laser nanostructuring (1)
- Laser technology (1)
- Laser-Materialbearbeitung (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced amorphization (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures (1)
- Laser-induzierte periodische Oberflächen-Nanostrukturen (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Laser-modified surface (1)
- Laserschutz (1)
- Light concentration (1)
- Literature survey (1)
- Materialbearbeitung (1)
- Matter reorganization (1)
- Matter reorganization theories (1)
- Medical implants (1)
- Melting (1)
- Metals (1)
- Micro solar cell (1)
- Micro solar cells (1)
- Micro-concentrator solar cell (1)
- Microbial adhesions (1)
- Mikrostrukturen (1)
- Nanofibers (1)
- Nanosecond laser (1)
- Nanosecond laser irradiation (1)
- Nanostrcutures (1)
- Nanostructuring (1)
- Nanostrukturen (1)
- Native oxide layer (1)
- Nonlinear lithography (1)
- Oberflächenmodifikation (1)
- Ophthalmology (1)
- Optical scattering (1)
- Phase mask (1)
- Phase-contrast microscopy (1)
- Photovoltaics (1)
- Polyethylene (1)
- Polyethylene terephthalate (1)
- Protection housing (1)
- Pulse Laser (1)
- Pump-probe (1)
- Quarzglas (1)
- Reactive oxygen species (1)
- Reibung (1)
- Reibungsreduktion (1)
- Röntgenemission (1)
- Saphir (1)
- Second-generation high temperature superconductor technology (1)
- Sekundärstrahlung (1)
- Sliding (1)
- Superconductivity (1)
- Surface (1)
- Surface chemistry (1)
- Surface engineering (1)
- Surface oxidation (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface texture (1)
- Theoretical modelling (1)
- Thin films (1)
- Ti6Al4V alloys (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Titanium alloy (1)
- Titanium alloys (1)
- ToF-SIMS (1)
- Transmission electron microscopy (1)
- Tribologie (1)
- Ultrafast scattering (1)
- Ultrakurze Laserpulse (1)
- Ultrakurzpuls-Laser (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultrashort (1)
- Ultrashort lasers (1)
- Verschleiß (1)
- Verschleißreduktion (1)
- Wetting (1)
- X-ray (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrum (1)
- XUV scattering (1)
Organisationseinheit der BAM
- 6 Materialchemie (106) (entfernen)
Paper des Monats
- ja (3)
Der Vortrag gibt einen Überblick über die Erzeugung und Charakterisierung anisotroper Nanostrukturen mittels ultrakurzgepulster Laserstrahlung. Besonderes Augenmerk liegt dabei auf dem Phänomen der sogenannten Laser-induzierten periodischen Oberflächen-Nanostrukturen auf dielektrischen Werkstoffen und ihrer zeitlichen Dynamik. Weitere Beispiele von Volumen-Nanostrukturen aus der Literatur werden diskutiert.
The polarization of the laser beam exhibits more substantial differences in laser micromachining as the angle of incidence deviates from zero. In the reported work, our focus was to explore the effects of circularly, p- and s-polarized laser on angled ultrashort pulse laser micromachining of micropillar arrays. The examination encompassed laser process factors, including angles of incidence, microstructure dimensions, and inter-pillar spacing. A comparison between the resulting structures demonstrated that p-polarized laser beam was the most efficient in material removal in angled laser micromachining, followed by circularly polarized laser. While the s-polarized beam exhibited the lowest ablation efficiency among the three. Such distinction is mainly attributed to the distinguishing reflectivity of the three states of polarization on tilted planes. The development of structural heights during ablation processes was examined, and potential defects in laser processing methodologies were interpreted. The dependency of structural heights on inter-pillar spacing was analyzed. This study bridges the gap between existing studies on angled ultrashort pulse laser machining and the influences of polarization on laser machining. The comparison between structures produced using laboratory-scale and industrial-scale laser systems also yielded pertinent recommendations for facilitating a smooth transition of angled laser micromachining from laboratory-scale research to industrial applications.
Laser-induced periodic surface structures (LIPSS) represent a unique route for functionalizing materials through the fabrication of surface nanostructures. Commercial AISI 316L stainless steel (SS316L) surfaces are laser treated by ultraviolet 300 ps laser pulses in a laser line scanning (LLS) approach. Processing parameters are optimized (pulse energy of 2.08 µJ, pulse repetition frequency of 300 kHz, and suitable laser scan and sample displacement rates) for the generation of low spatial frequency LIPSS over a large 25 × 25 mm2 area. Different angles of incidence of the laser radiation (0°, 30°, and 45°) and different linear laser beam polarizations (s and p) produce a plethora of rippled surface morphologies at distinct grains. Scanning electron microscopy and 2D Fourier transforms, together with calculations of the optical energy deposited at the treated surfaces using Sipe's first-principles electromagnetic scattering theory, are used to study and analyze in detail these surface morphologies. Combined with electron backscattering diffraction, analyses allow associating site-selectively various laser-induced-surface morphologies with the underlying crystalline grain orientation. Resulting grain orientation maps reveal a strong impact of the grain crystallographic orientation on LIPSS formation and point toward possible strategies, like multi-step processes, for improving the manufacturing of LIPSS and their areal coverage of polycrystalline technical materials.
Commercial grade-1 titanium samples (Ti, 99.6%) were treated using three alternative methods, (i) femtosecond laser processing, (ii) thermal heat treatment, and (iii) electrochemical anodization, respectively, resulting in the formation of differently conditioned superficial titanium oxide layers. The laser processing (i) was carried out by a Ti:sapphire laser (pulse duration 30 fs, central wavelength 790 nm, pulse repetition rate 1 kHz) in a regime of generating laser-induced periodic surface structures (LIPSS). The experimental conditions (laser fluence, spatial spot overlap) were optimized in a sample-scanning setup for the processing of several square-millimeters large surface areas covered homogeneously by these nanostructures. The differently oxidized titanium surfaces were characterized by optical microscopy, micro Raman spectroscopy, variable angle spectroscopic ellipsometry, and instrumented indentation testing. The tribological performance was characterized in the regime of mixed friction by reciprocating sliding tests against a sphere of hardened steel in fully formulated engine oil as lubricant. The specific tribological performance of the differently treated surfaces is discussed with respect to possible physical and chemical mechanisms.
Advances in ultrafast laser manufacturing: nanostructures, thin films, and scaling perspectives
(2024)
Advanced ultrafast laser technology is a rapidly growing field that currently enables many new industrial and scientific applications. During the last decades, this has been significantly driven by the availability of high-repetition-rate laser sources and novel beam delivery concepts. At the laser side, Moore’s law equally manifests for ultrafast laser technologies, since the average output power of such lasers doubles approximately every two years. This development is mainly driven by the increase of the pulse repetition rates of energetic laser pulses, currently enforcing the development of smart beam control and novel scanning strategies for preventing heat-accumulation and plasma-shielding effects during laser-based materials processing. This keynote presentation addresses the advantages, recent developments, and perspectives of laser processing with ultrashort laser pulses. A special focus is laid on the tailored structuring of thin films as well as the manufacturing and probing of sub-diffraction surface nanostructures – an ongoing race to extreme scales. Current limitations are identified and an outlook to future scaling perspectives will be provided.
Laser-induced periodic surface structures (LIPSS) enable a large variety of different surface functionalizations for applications in the fields of optics, fluidics, tribology, or medicine. Moreover, high spatial frequency LIPSS (HSFL) provide an appealing and straightforward way for the generation of surface nanostructures featuring spatial periods even below 100 nm – far beyond the optical diffraction limit. However, the imposed surface functionalities are usually caused by both, topographic and chemical surface alterations. For exploring these effects in detail, multi-method characterization was performed here for HSFL processed on Ti-6Al-4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm wavelength, ~1 ps pulse duration, 1 – 400 kHz pulse repetition rate) under different scan processing conditions. The subsequent sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), stylus profilometry (SP), as well as near-surface chemical analyses by X-ray photoelectron spectroscopy (XPS), hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (TOF-SIMS). The results allow to qualify the laser ablation depth, the geometrical HSFL characteristics and provide detailed insights into the depth extent and the nature of the ps-laser-induced near-surface oxidation arising from the laser-processing in ambient air and into the relevance of heat-accumulation effects at high pulse repetition rates. Moreover, the direct comparison of the HAXPES and XPS data reveals the role of surface-covering organic contaminants adsorbed from the ambient atmosphere without ion-sputter depth profiling. Furthermore, reduction of the oxides by sputtering can be avoided.