Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (129) (entfernen)
Sprache
- Englisch (129)
Schlagworte
- Laser-induced periodic surface structures (LIPSS) (36)
- Femtosecond laser ablation (24)
- Femtosecond laser (16)
- Laser processing (12)
- Laser ablation (11)
- Silicon (10)
- Surface functionalization (9)
- Nanostructures (7)
- Friction (6)
- High-speed optical techniques (6)
- Laser beam effects (6)
- Radiation protection (6)
- Wear (6)
- Femtosecond laser processing (5)
- Laser-induced periodic surface structures (5)
- Silicon compounds (5)
- Steel (5)
- Tribology (5)
- Applications (4)
- Double-pulse experiments (4)
- Indium phosphide (4)
- Oxidation (4)
- Raman spectroscopy (4)
- Ultrafast optical techniques (4)
- Ablation (3)
- Atomic force microscopy (3)
- Chalcopyrite (3)
- Dielectrics (3)
- Laser-induced X-ray emission (3)
- Laser-induced periodic surface structures, LIPSS (3)
- Mach-Zehnder interferometer (3)
- Microstructures (3)
- Polycarbonate (3)
- Refractive index (3)
- Surface morphology (3)
- Surface structure (3)
- Titanium (3)
- Ultrashort laser pulses (3)
- Ultrashort pulsed laser (3)
- XANES (3)
- Anodization (2)
- Biofilms (2)
- Cell adhesion (2)
- Damage threshold (2)
- Direct laser interference patterning (DLIP) (2)
- Elemental semiconductors (2)
- Femtosecond laser patterning (2)
- Fluid transport (2)
- Fused silica (2)
- Glass (2)
- Glasses (2)
- Laser (2)
- Laser-induced oxide layer (2)
- Laser-induced x-ray emission (2)
- Light concentration (2)
- Magnesium compounds (2)
- Micro solar cells (2)
- Micro-concentrator solar cell (2)
- Nanosecond laser (2)
- Niobium (2)
- Optical breakdown (2)
- Optical properties (2)
- Pacemaker (2)
- Photovoltaics (2)
- Polaritons (2)
- Potassium compounds (2)
- Scanning electron microscopy (2)
- Scanning force microscopy (2)
- Semiconductor (2)
- Surface modification (2)
- Surface plasmon polaritons (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Time-resolved measurements (2)
- Titanium alloy (2)
- Titanium nitride (2)
- Ultrashort laser material interaction (2)
- (LIPSS) (1)
- 532 nm wavelength (1)
- ASTM (1)
- Ab initio calculations (1)
- Absorber optimization (1)
- Additives (1)
- Advanced applications (1)
- Aluminium (1)
- Amorphization (1)
- Analysis (1)
- Anodic oxidation (1)
- Antibacterial surfaces (1)
- Auger electron spectroscopy (1)
- Bacterial adhesion (1)
- Bariumalumoborosilicate glass (1)
- Biofilm (1)
- Biofilm formation (1)
- Bioinspiration (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Bond lengths (1)
- Bone screws (1)
- Bug (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- CIGSe (1)
- CIGSe micro solar cells (1)
- Calamistrum (1)
- Capillary waves (1)
- Carbon fibers (1)
- Carrier plasmas (1)
- Cell appendages (1)
- Cell-repellent surfaces (1)
- Ceramic matrix composites (1)
- Chemical analysis (1)
- Conduction bands (1)
- Copper-indium-gallium-diselenide (1)
- Cribellate spiders (1)
- Crystallization (1)
- CuInSe2 (1)
- D7755-11 (1)
- Darkfield microscopy (1)
- Debris (1)
- Dentistry (1)
- Diffusion (1)
- Direct laser interference patterning (1)
- Drude model (1)
- EDX (1)
- Editorial (1)
- Electrochemical treatment (1)
- Electromagnetic scattering (1)
- Electromagnetic theories (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron microscopy (1)
- Electrospinning (1)
- European funding strategies (1)
- F pili (1)
- FS-laser ablation (1)
- Femtosecond laser irradiation (1)
- Femtosecond laser pulse (1)
- Femtosecond laser-processing (1)
- Fluid-flow (1)
- Fourier transforms (1)
- Free electron laser (1)
- Fs-Laser (1)
- Fs-time resolved microscopy (1)
- Functional properties (1)
- Glass structure (1)
- Grain orientation (1)
- Grating (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Heat affected zone (1)
- Heat diffusion (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical structures (1)
- Implant material (1)
- Indium (1)
- Indium Phosphide (1)
- Indium islands (1)
- Industrial application (1)
- Industrial applications (1)
- LIFT (1)
- LIPSS (1)
- Large area structuring (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser damage (1)
- Laser induced periodic surface structures (1)
- Laser materials-processing applications (1)
- Laser radiation effects (1)
- Laser scanning microscopy (1)
- Laser scribing (1)
- Laser-induced forward transfer (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-modified surface (1)
- Light transmission (1)
- Literature survey (1)
- Lizard (1)
- Material sciences (1)
- Matter reorganization theories (1)
- Medical implants (1)
- Melting (1)
- Metals (1)
- Michelson interferometer (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Microscopy (1)
- Microstructure (1)
- Modelling (1)
- Molybdenum substrate (1)
- Monochromators (1)
- Nanofibers (1)
- Nanosecond laser ablation (1)
- Nanosecond laser irradiation (1)
- Nanostructuring (1)
- Neodymium (1)
- Ophthalmology (1)
- Optical coatings (1)
- Optical harmonic generation (1)
- Optical microscopy (1)
- Optical pulse shaping (1)
- Phase mask (1)
- Phase-contrast microscopy (1)
- Photoelektron spectroscopy (1)
- Physical vapor deposition (1)
- Picosecond (1)
- Plasma formation (1)
- Plasma processing (1)
- Polarisation (1)
- Polyethylene (1)
- Polyethylene terephthalate (1)
- Polyimide (1)
- Polymer (1)
- Polymethylmethacrylate (1)
- Potassium-magnesium silicate glass (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Pulse shaping (1)
- Pump-probe experiments (1)
- Reflectivity measurements (1)
- Refractive index engineering (1)
- SEM (1)
- Sapphire (1)
- Scanning Auger electron microscopy (1)
- Scanning Force Microscopy (1)
- Scattering (1)
- Second-generation high temperature superconductor technology (1)
- Secondary hazard (1)
- Self-induced transparency (1)
- Self-organization (1)
- Semiconductor materials (1)
- Semiconductors (1)
- Silica (1)
- Silicate glasses (1)
- Silicon nitride (1)
- Silicon oxide (1)
- Sliding (1)
- Solar cell (1)
- Solid lasers (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Structural relaxation (1)
- Superconductivity (1)
- Surface (1)
- Surface chemistry (1)
- Surface plasmon polariton (1)
- Surface processing (1)
- Surface reflectivity (1)
- Surface structures (1)
- Surface superconductivity (1)
- TeO2 (1)
- Tellurium dioxide crystals (1)
- Thin films (1)
- Thin-film solar cells (1)
- Threshold of silicon (1)
- Ti6Al4V alloys (1)
- Time-of-flight mass spectroscopy (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved microscopy (1)
- Time-resolved scattering (1)
- Titanium alloys (1)
- Titanium nitride films (1)
- Transmission electron microscopy (1)
- Transmission measurements (1)
- Ultra-short pulse laser processing (1)
- Ultrafast laser excitation (1)
- Ultrafast microscopy (1)
- Ultrafast optics (1)
- Ultrashort laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- X-ray (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrum (1)
- lossy materials (1)
- plasmon lifetime (1)
- second laser (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (52)
- 6.2 Material- und Oberflächentechnologien (52)
- 9 Komponentensicherheit (7)
- 9.5 Tribologie und Verschleißschutz (7)
- 6.7 Materialsynthese und Design (4)
- 4 Material und Umwelt (3)
- 4.1 Biologische Materialschädigung und Referenzorganismen (3)
- 6.1 Oberflächen- und Dünnschichtanalyse (2)
- 6.6 Physik und chemische Analytik der Polymere (2)
- 5 Werkstofftechnik (1)
Paper des Monats
- ja (3)
A corrosion study is performed on six variations of titanium grade 5 (Ti6Al4V) samples. Samples are prepared in different conditions by variation of preanodization, postanodization, and picosecond-laser (ps-laser) surface treatment, while polished and anodized samples serve as reference. Microcones and nanosized periodic surface features are successfully produced on Ti6Al4V samples. The morphology and topography of the structures are visualized by scanning electron microscopy and white light interference microscopy. Furthermore, the relative electrochemically active surface area (ECSA) is determined for the ps-laser-treated samples. It is determined that the preanodized and laser-treated sample has 3.5 times larger ECSA than a polished sample, and that the laser-treated sample has 4.1 times larger area. Moreover, Tafel analysis is performed to determine the corrosion properties of the samples. It is shown that the corrosion resistance improves for both laser-structured samples after the anodization. To further study the surface of the samples, electrochemical impedance spectroscopy measurements are conducted. The study indicates that the ps-laser-treated and anodized Ti6Al4V is suitable to be used for the fabrication of bone screws and plates due to its improved corrosion resistance as compared to nonanodized samples.
Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over a large range of length scales from mm down to the nano‐range. One of the most prominent examples are LIPSS – Laser‐Induced Periodic Surface Structures. While LIPSS have been a scientific evergreen for of almost 60 years, experimental methods that combine ultrafast temporal with the required nm spatial resolution have become available only recently with the advent of short pulse, short wavelength free electron lasers. Here, the current status and future perspectives in this field are discussed by exploiting the unique possibilities of these 4th‐generation light sources to address by time‐domain experimental techniques the fundamental LIPSS‐question, namely why and how laser irradiation can initiate the transition of a “chaotic” (rough) surface from an aperiodic into a periodic structure.
The polarization of the laser beam exhibits more substantial differences in laser micromachining as the angle of incidence deviates from zero. In the reported work, our focus was to explore the effects of circularly, p- and s-polarized laser on angled ultrashort pulse laser micromachining of micropillar arrays. The examination encompassed laser process factors, including angles of incidence, microstructure dimensions, and inter-pillar spacing. A comparison between the resulting structures demonstrated that p-polarized laser beam was the most efficient in material removal in angled laser micromachining, followed by circularly polarized laser. While the s-polarized beam exhibited the lowest ablation efficiency among the three. Such distinction is mainly attributed to the distinguishing reflectivity of the three states of polarization on tilted planes. The development of structural heights during ablation processes was examined, and potential defects in laser processing methodologies were interpreted. The dependency of structural heights on inter-pillar spacing was analyzed. This study bridges the gap between existing studies on angled ultrashort pulse laser machining and the influences of polarization on laser machining. The comparison between structures produced using laboratory-scale and industrial-scale laser systems also yielded pertinent recommendations for facilitating a smooth transition of angled laser micromachining from laboratory-scale research to industrial applications.
Modern life and global communication would not be possible without technologically tailored thin films; they are omnipresent in daily life applications. In most cases, the films are deposited entirely at the carrying substrates in a specific processing step of the device or sample. In some cases, however, removal or modification must be performed locally, i.e., site-controlled and material selective through an additional laser processing step. For that ultrashort laser pulses with durations in the femtosecond and picosecond range can provide unique advantages and capabilities in industrially scalable schemes. This article reviews the current state of the research and corresponding industrial transfer related to the structuring of thin films by ultrashort pulsed lasers. It focuses on the pertinent historic developments, reveals the relevant physical and chemical effects, explores the ultimate limits, and discusses selected industrial and scientific applications.
X‑ray emission during the ablative processing of biological materials by ultrashort laser pulses
(2023)
The ablative laser processing with ultrashort pulsed laser beams may cause secondary emission of hazardous X-rays. While the effect has recently been proven to be considered in working safety regulations when processing technical materials, such as metals, the X-ray emission rates during the ablative processing of biological tissue materials are widely unexplored yet.
Therefore, biological materials like water, isotonic saline solution, pig eyes, and human teeth were ablated with ultrashort laser pulses of 1030 nm wavelength, 600 fs pulse duration and 5 kHz pulse repetition rate, aiming to mimic typical surgery situations. Simultaneously, in-situ X-ray dose rate measurements were performed at a short distance from the plasma to display potential X-ray emission. For all four studied biological materials, our measurements prove the secondary emission of laser-induced X-rays.
Bulk metallic glasses (BMG) are amorphous metal alloys known for their unique physical and mechanical properties. In the present study, the formation of femtosecond (fs) laser-induced periodic surface structures (LIPSS) on the Zr-based BMGs Zr46Cu46Al8, Zr61Cu25Al12Ti2, Zr52.5Cu17.9Al10Ni14.6Ti5 (Vit105) and Zr57Cu15.4Al10Ni12.6Nb5 (Vit106) was investigated as a function of their different chemical composition. For this purpose, LIPSS were generated on the sample surfaces in an air environment by fs-laser irradiation (λ = 1025 nm, τ = 300 fs, frep = 100 kHz). The surface topography was characterized by scanning electron microscopy and atomic force microscopy. Moreover, the impact of LIPSS formation on the structure and chemical surface composition was analyzed before and after fs-laser irradiation by X-ray diffraction and X-ray photoelectron spectroscopy as well as by transmission electron microscopy in combination with energy dispersive X-ray spectroscopy. Despite the different chemical composition of the investigated BMGs, the fs-laser irradiation resulted in almost similar properties of the generated LIPSS patterns. In the case of Zr61Cu25Al12Ti2, Vit105 and Vit106, the surface analysis revealed the preservation of the amorphous state of the materials during fs-laser irradiation. The study demonstrated the presence of a native oxide layer on all pristine BMGs. In addition, fs-laser irradiation results in the formation of laser-induced oxide layers of larger thickness consisting of an amorphous ZrAlCu-oxide. The precise laser-structuring of BMG surfaces on the nanoscale provides a versatile alternative to thermoplastic forming of BMG surfaces and is of particular interest for the engineering of functional material surfaces.
Titanium and its alloys are known to allow the straightforward laser-based manufacturing of ordered surface nanostructures, so-called high spatial frequency laser-induced periodic surface structures (HSFL). These structures exhibit sub-100 nm spatial periods – far below the optical diffraction limit. The resulting surface functionalities are usually enabled by both, topographic and chemical alterations of the nanostructured surfaces. For exploring these effects, multi-method characterizations were performed here for HSFL processed on Ti–6Al–4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm, ≈1 ps pulse duration, 1–400 kHz) under different laser scan processing conditions, i.e., by systematically varying the pulse repetition frequency and the number of laser irradiation passes. The sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), tactile stylus profilometry, as well as near-surface chemical analyses hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (ToF-SIMS). This provides a quantification of the laser ablation depth, the geometrical HSFL characteristics and enables new insights into the depth extent and the nature of the non-ablative laser-induced near-surface oxidation accompanying these nanostructures. This allows to answer the questions how the processing of HSFL can be industrially scaled up, and whether the latter is limited by heat-accumulation effects.
Bacterial biofilms pose serious problems in medical and industrial settings. One of the major societal challenges lies in the increasing resistance of bacteria against biocides used in antimicrobial treatments, e.g., via overabundant use in medicine, industry, and agriculture or cleaning and disinfection in private households. Hence, new efficient bacteria-repellent strategies avoiding the use of biocides are strongly desired. One promising route to achieve bacteria-repellent surfaces lies in the contactless and aseptic large-area laser-processing of technical surfaces. Tailored surface textures, enabled by different laser-processing strategies that result in topographic scales ranging from nanometers to micrometers may provide a solution to this challenge. This article presents a current state-of-the-art review of laser-surface subtractive texturing approaches for controlling the biofilm formation for different bacterial strains and in different environments. Based on specific properties of bacteria and laser-processed surfaces, the challenges of anti-microbial surface designs are discussed, and future directions will be outlined.