Filtern
Erscheinungsjahr
- 2016 (5) (entfernen)
Dokumenttyp
- Beitrag zu einem Tagungsband (4)
- Vortrag (1)
Referierte Publikation
- nein (5)
Schlagworte
- Akustische Linse (1)
- Analytical approach (1)
- Automatisierte Ultraschallprüfung (1)
- Composite (1)
- Full matrix capture (1)
- Material characterisation (1)
- Phased array (1)
- Purity grade (1)
- Radsatzwellen (1)
- Signalverarbeitung (1)
Eingeladener Vortrag
- nein (1)
In the last two decades automated ultrasonic inspection devices took over a lot of applications that prior have been carried out using manual inspection with the evaluation of A-scans only. In parallel phased array systems have been developed and brought to the market which offer detailed and fast control over the sound field. When applying automated inspection phased array systems for UT measurements imaging of the recorded data in combination with the probe positioning data is used for the evaluation of inspections. B-Scan, C-Scan and S-Scan images are typically used with this setup.
For more sophisticated applications with linear arrays echo tomography and syntethic aperture focusing technique (SAFT) are well known methods and often applied for high resolution image reconstruction. Since channel count of phased array systems is constantly rising, matrix arrays with up to 256 elements entered the market. Signal processing in the matrix domain became 3D. Since some years the Total Focusing Method (TFM) is an additional imaging tool for these type of application. It is based on the Full Matrix Capture (FMC) using the elements of phased array probes as separate transmitters and receivers.
In this contribution we discuss the common ground of SAFT and TFM as well as the differences between these imaging tools. The combined use of automated inspection, matrix arrays and signal processing for high resolution measurements is a challenging task where a very long parameter list has to be taken into account. Under which conditions which elements of the full matrix should be taken for the reconstruction for best results?
Based on examples taken from measured and simulated echo signals it will be shown how image resolution can be optimized in dependence of different parameters like the distance between transmitters and receivers and their directivity patterns, the depth of echo source and the specimen geometry.
Der einwandfreie Zustand der Radsätze von Schienenfahrzeugen ist von größter Bedeutung für den sicheren Betrieb. Die Radsatzwellen werden durch eine große Zahl von Lastwechseln individuell unterschiedlich beansprucht. Dabei spielen viele Einflüsse wie äußere statische und dynamische Lasten, innere Lasten aufgrund von Unwuchten und inneren Spannungen und Umweltbedingungen entscheidende Rollen. Eine regelmäßige Prüfung ist daher obligatorisch.
BTD entwickelt im Rahmen eines MNPQ-Projektes in Kooperation mit der BAM eine Phased Array Technik zur automatisierten Prüfung von Radsatzwellen im eingebauten
Zustand. Die schwierigen Ankoppelbedingungen aufgrund der begrenzten Zugänglichkeit, der komplexen Geometrie und möglicherweise vorhandener Farbschichten und Schmutz
auf der Radsatzwelle stellen hierbei große Herausforderungen dar. Um diesen zu begegnen,
werden neben optimierten Prüfköpfen, einer in die Wasservorlaufstrecke integrierten
akustischen Linse und einer speziellen Ankoppeltechnik auch Signalverarbeitungsalgorithmen
eingesetzt.
Die Darstellung der Signalverarbeitung ist der Schwerpunkt dieses Beitrages. Mit Hilfe von Messdatensätzen präparierter Testwellen werden verschiedene Algorithmen
erprobt und hinsichtlich der Stabilität, dem Verhalten bezüglich der
Ankoppelschwankungen und veränderter Wellengeometrien und der Fähigkeit zur
automatischen Unterscheidung von Fehler- und Formanzeigen bewertet. Letztlich wird die
beste Lösung im entwickelten Prüfsystem eingesetzt.
With increased usage of highly demanded, modern materials on safety
relevant parts (e.g. railway wheel sets, generator shafts, turbine disks, medical
implants, etc.) comprehensive analyses regarding the quality of the material are
requested. This gives a focus to non-destructive methods using ultrasound immersion
tank testing for classifying the degree of purity. Two autonomous standards,
ASTM E588 and SEP 1927, have been established for the definition, execution and
evaluation for this high resolution ultrasonic measurements on steel products.
The propagation of ultrasonic waves and the resulting sound field are strongly
dependent on the acoustical properties of the inspected material and the geometry
of probes and specimen. The definition of the measurement setup and the evaluation
methods appear to differ significantly in the given standards. ASTM E588 and
SEP 1927 prescribe the requirement for surface roughness and probe selection, are
using threshold based methods for cleanliness detection, but differ in computation
for the degree of purity. This has been the motivation for a comparison between
both standards with the main focus on amplitude depth dependency and overall spatial
resolution taking the influence of different material characteristics, geometry of
the specimen and sound fields into account.
A performance comparison between the use of non-focusing and focusing probes
respective to the threshold based detection will be presented in this contribution. In
addition, the usage of complex reconstruction algorithms (e.g. SAFT, echo tomography)
is compared with the traditional approaches of inclusion detection and
estimation of the degree of purity
Electromagnetic waves with frequencies between 0.1 and 10 THz are described as THz-radiation (T-ray). The ability to penetrate dielectric materials makes T-rays attractive to reveal discontinuities in polymer and ceramic materials. THz-Time Domain Spectroscopy Systems (THz-TDS) are available on the market today which operates with THz-pulses transmitted and received by optically pumped semiconductor antennas. In THz-TDS the travelling time (ToF) and shape of the pulse is changed if it interacts with the dielectric material and its inherent discontinuities.
A tomogram of the object under the test can be reconstructed from time of flight diffraction (ToFD) scans if a synthetic focusing aperture (SAFT) algorithm is applied. Otherwise, planar discontinuities like cracks in plastics or delaminated layers in composites can be abstracted as layers located at any angle in relation to the outer sample surface direction. A tomogram from the scanned sample can then be reconstructed in case the interactions of electromagnetic pulses with the existing inherent interfaces are detectable and a model is assumed which describes the device under the test as multilayer structure composed of thin layers with different dielectric properties.
A short description of both the SAFT – and Optical Layer algorithm for the reconstruction of the inherent structure is initially given. Measurements on representative samples with a variety of artificially produced small and large scale. Reconstructed tomograms are presented to discuss and evaluate the benefits and limits of the two different reconstruction approaches.
Applications of fibre reinforced plastic (FRP) composites in modern industries are increasing due to their considerable advantages such as light weight and excellent mechanical properties. Accordingly, importance of operational safety of modern structures made of advanced composites by ensuring the material quality has led to increasing demands for development of non-destructive evaluation (NDE) systems. In the context of a European project entitled “Validated Inspection Techniques for Composites in Energy Applications” (VITCEA), the aim is to develop and validate traceable procedures for novel NDE techniques with contrasting damage detection capabilities in energy related applications such as wind and marine turbine blades, nacelles, oil and gas flexible risers. Accordingly, VITCEA focuses on optimization of ultrasonic tests (UTs) for quantitative defect detection and quality characterization of FRP structures. In this context, the present study describes the ultrasound field in heterogeneous composite materials. The theoretical predictions are compared with simulation results obtained from CIVA a software package dedicated to NDT simulations based on the asymptotic ray theory.