Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (10)
- Zeitschriftenartikel (2)
- Forschungsbericht (2)
- Vortrag (1)
- Sonstiges (1)
Schlagworte
- Haftfestigkeit (6)
- Zentrifugentechnologie (6)
- Klebfestigkeit (5)
- Bonding strength (4)
- Tensile strength (4)
- Adhesion (3)
- Centrifuge technology (3)
- Verbundfestigkeit (3)
- Adhesive strength (2)
- Adhäsion (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
Standardised conventional adhesion tests are time-consuming single-sample tests. Moreover, except for the pull-off test, all these tests provide only qualitative or semi-quantitative (ranking, respectively measurement of an adhesion-correlated quantity) information on adhesion. Sometimes, adhesion is evaluated even under compressive stress conditions (e.g. cross-cut and scratch test), which itself is a contradiction to adhesive strength as defined in terms of tensile force per area.
For optical coatings it has been shown that the pull-off test in a centrifuge is definitely a promising alternative with respect to the reliable, fast and quantitative determination of adhesive strength in N/mm2. The force-controlled centrifuge test is the only multiple-sample test which provides reliable quantitative information on the adhesive strength in agreement with DIN EN 15870 and DIN EN ISO 4624 on a statistical basis for up to eight samples simultaneously tested under identical testing conditions.
Composite materials fulfil a great variety of functions in a wide field of applications. Testing the composite properties under environmental conditions is a must for development and quality control. Common tensile strength test instruments have limitations, like single sample handling only. Present test methods for multi-layers, e.g. peel test, permit semi-quantitative ,or qualitative evaluation only. A new instrument based on analytical centrifugation is introduced, using centrifugal force as test load, permitting to determine bonding and adhesive strength of up to 8 samples simultaneously.
Das Vorhaben ZENSUS beschäftigt sich mit der Erstellung eines Normenentwurfs bzw. einer normen-konformen Technischen Spezifikation für die Zentrifugen-basierte Prüfung der Klebfestigkeit von Stumpfklebungen. Das umfasst auch umfangreiche Validierungsversuche, um mögliche Unterschiede zwischen Kraft-gesteuerter (Zentrifuge) und Weg-gesteuerter (Zugprüfmaschine) bzw. ggf. dazu korrelierte Materialabhängigkeiten mit ihren Auswirkungen auf SOPs zu identifizieren. Die Zentri-fugen-basierte Mehr-Proben-Prüfung von bis zu 8 Klebverbunden wird im Weiteren mit CAT-Technologie („Centrifugal Adhesion Testing“) abgekürzt.
The multiple-sample approach by means of centrifugal adhesion testing (CAT-technology) allows the determination of bonding strength of adhesive-bonded joints on a statistical basis of up to eight samples. Therefore, it is obvious to ensure the continuous handling and identical processing of an octet of samples within the entire process chain of wet-chemical cleaning, plasma-chemical pre-treatment, bonding of samples, and testing of bonding strength. Within the multiple-sample bonding set-up (MPKV-technology) a defined bonding pressure can be adjusted regardless the actual number of samples. A comparison of single- and multiple-sample approach is made for bonding strength of selected adhesives, double-sided adhesive tapes and different material combinations [stainless steel (V2A) vs. stainless steel, polyamide (PA), or polypropylene (PP)]. It is shown that both technologies improve reliability of results
The quality and durability of bonded joints, coated systems and composites depend on various factors. Therefore effective quantitative tests to determine adhesive, bonding or composite strength are of great need for R&D and QC. In this paper a new measuring principle is described which uses the centrifugal force to generate the test load. By the geometry of the whole measurement set-up, the test specimen are supported from only one side, the influence of shear forces is avoided. The possibility to test up to eight samples in one measurement under identical testing conditions allows a high sample throughput.
A detailed description of the whole sample preparation procedure including pre-treatment is followed by the specification of the measuring protocol as well as result analysis. For each application area bonding strength of joints, adhesive strength of coated systems and internal strength of composite materials examples are presented.
Although adhesion testing of coatings is of fundamental interest for quality assurance, it is still a challenge regarding reliable quantitative results. Because of the huge variety of coating/ substrate systems in terms of materials and thickness range, adhesion tests display the same variety as coating/substrate systems. Some tests are qualitative, many are quantitative but except for the pull (DIN EN ISO 15870) and pull-off test (DIN EN ISO 4624) adhesion is not measured in terms of force per area.
For optical coatings, the standardized tests according to ISO 9211-4 apply, i.e. abrasion tests (cheese cloth or eraser test) and adhesion tests (tape or cross-hatch test) with different degrees of severity. Instead of the adhesion strength, all these single-sample tests provide only quantitative information on the abrasion or adhesion resistance of a particular coating/ substrate system.
The centrifuge test has manifold advantages. First, it can be easily run as multiple-sample test. Second, adhesion strength is measured in absolute numbers (N/mm2). Third, the centrifuge test requires only a one-sided sample support instead of a two-sided sample clamping as the pull- and pull-off test do. Fourth, it is much easier and faster than many other tests. Fifth, the centrifuge technology additionally enables tests under defined climates or harsh environments. Last but not least, versatile test conditions (alternating loads at various load rates) important to fatigue testing can be easily realized by varying the number of revolutions.
The centrifuge test was applied to the testing of optical coatings on glass and CaF2. It could be shown that there are significant advantages compared to other tests. In particular, the centrifuge test was able to discriminate the adhesion strength for coating/substrate systems until failure which all passed the standardized tests of ISO 9211-4.
The future commercial prospects for adhesive tapes are very good and its application range is very broad. From every-day-use in office, packaging, maintenance, and quick repair in workshops, it ranges from handicraft work, medical purposes and cosmetics up to workmanship. The study describes a new multi-sample approach in adhesive tape testing from theoretical background, preparation of test specimen for tensile as well as shear testing, detailed measurement procedures up to analysis and result interpretation. Various types of single and double-sided pressure sensitive adhesive tapes supplied by different manufacturers were investigated and compared