Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (9)
- Vortrag (9)
- Zeitschriftenartikel (3)
- Posterpräsentation (1)
Schlagworte
- Urban heat island (3)
- Betonpflasterstein (2)
- Bindemittel (2)
- Cement (2)
- Concrete paving stone (2)
- Hitzeinsel (2)
- Nachweis der Wirksamkeit (2)
- Papierasche (2)
- Performance tests (2)
- Selbstkühlend (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (9)
In the last several decades, the rural exodus has led to an increasing number of inhabitants in the urban areas. The increased building and infrastructural construction caused the transformation of the landscape and to an increased land sealing in these areas. Consequently, the increased land sealing influences the air temperatures in the cities, since houses, streets and squares heat up continuously. As a result, the city and metropolitan areas became significantly warmer than their surroundings - the effect is known as Urban Heat Island (UHI). These changes have a negative impact for the quality of life. To deal with the negative effects of UHI, a high level of technical and financial effort is necessary. The costs caused by the UHI effects are in the range of several billion US dollars worldwide per year. The recent studies on UHI showed that the established methods like parks and green spaces or bright coatings for roof areas will soon not be able to effectively cope with the UHI effect in urban areas. Therefore there is a need for additional methods to mitigate UHI effect in the cities. The streets, sidewalks and squares represent approximately 30% to 40% of the inner cities areas. If these areas are designed functionally, they can have a significant impact on the UHI. This contribution focuses on development of a concrete paving stone with self-cooling properties. For the cooling effect the evaporative cooling is used. The paving stone is able to store large quantities of water and deliver during appropriate environmental conditions. This paper deals with the results of the long-term experiments on the test-fields under different climatic conditions. To interpret the test-field-results, laboratory tests were carried out as well. The paper presents and discuss the obtained results, and points out the difficulties occurred.
Synthese hydraulischer Phasen in Papierasche und Braunkohlenflugasche durch hydrothermale Behandlung
(2015)
Reststoffe aus industriellen Filter- und Verbrennungsprozessen, die in ihren Hauptbestandteilen aus Si02- und CaO-reichen Mineralphasen bestehen, besitzen das Potential hydraulische Eigenschaften auszubilden. Das bedeutet, dass sie in Anwesenheit von Wasser oder alkalischen Lösungen festigkeitsbildende Phasen entwickeln. Oft bedarf es zunächst einer Aufbereitung um die hydraulischen Mineralphasen zu aktivieren. Hydraulische Phasen sind z.B. die Calciumsilikate Alit (C3S) und Belit (C2S). Sie unterscheiden sich vorrangig durch ihr Ca/Si-Verhältnis. Im Allgemeinen hydratisiert Belit langsamer als Alit und das Hydratationsprodukt weist nach 28 Tagen eine geringere Festigkeit auf. Zur Herstellung von Belit wird weniger Calciumoxid benötigt als zur Herstellung von Alit. Daher muss weniger CaC03 kalziniert werden und der C02-Ausstoß bei der Produktion verringert sich. Zur Synthese von hydraulisch aktivem Belit kann eine hydrothermale Aufbereitung dienen. Verschiedene Autoren nutzten diese Behandlung zur Aktivierung verschiedener Reststoffe, wobei sich CaO-reiche Asche aus der Energieerzeugung (z.B. Braunkohlenflugasche) als sehr geeignet erwies, Papierasche (PA) aus dem Papierrecyling besitzt ebenfalls einen hohen CaO-Gehalt und ist Bestandteil der aktuellen Bindemittelforschung auf Reststoffbasis. Die Untersuchung einer hydrothermalen Aktivierung fehlt bisher. Dieser Artikel soll einen Beitrag zur Klärung der folgenden Fragen leisten: Eignet sich Papierasche zur Belitsynthese durch hydrothermale Behandlung? Wie entwickeln sich die Mineralphasen im Vergleich zur Braunkohlenflugasche?