Filtern
Erscheinungsjahr
- 2011 (312) (entfernen)
Dokumenttyp
- Beitrag zu einem Tagungsband (312) (entfernen)
Sprache
- Englisch (177)
- Deutsch (133)
- Mehrsprachig (1)
- Russisch (1)
Referierte Publikation
- nein (312) (entfernen)
Schlagworte
- Recycling (8)
- Sekundärrohstoffe (7)
- Beton (6)
- Concrete (6)
- Leichtbeton (6)
- Schallemissionsprüfung (6)
- Sekundäre Gesteinskörnung (6)
- Computed tomography (5)
- Korrosion (5)
- Ultraschall (5)
Rising Prices of nickel and molybdenum in the past few years have led to unprecedented interest in Substitution of leaner-content alloys for Standard 300-series austenitic stainless steels in a lot of applications. Due to the high prices of different alloying elements and to periodic large fluctuations that cause similar large fluctuations in the costs of using 300-series stainless steels; a lot of new materials entered the markets in Europe and also in the rest of the world. A big disadvantage consists in the fact that there are though corrosion results that, however, a direct comparison of the corrosion resistance of these new materials does not exist up to now or only incompletely. In this project comparative investigations were carried out and always one or several representatives of a material group were incorporated. These material groups are: Lean Duplex Stainless Steels, Manganese Alloyed Austenitic and Duplex Stainless Steels and Ferritic Stainless Steels. These materials were investigated in a lot of different test procedures and in different conditions focused on the application in civil engineering and common use. Beside the electrochemical investigations all materials were exposed in different surface States in the atmosphere, once in Coastal nearness and once in a city centre area. Other exposition tests with material Coupons where done in the atmosphere of indoor swimming pools and at the case of food processing machines were corrosion processes are caused by the cleaning procedure. First results are reported.
Reststoffe aus Kohlekraftwerken und der Metallurgie, wie Steinkohlen- und Braunkohlenflugasche, Hüttensand und Silikastaub werden bereits seit Jahren als puzzolanische und hydraulische Zusätze in Zementen, Mörteln und Betonen zur Optimierung der Eigenschaften eingesetzt. Dennoch gibt es weitestgehend ungenutzte Sekundärrohstoffquellen aus der Silikon- und Kieselsäureherstellung.
Der Beitrag beschreibt Untersuchungen zur Nutzung kieselsäurehaltiger Filterrückstände aus der industriellen Abwasserbehandlung für den Einsatz als Bindemittelkomponente. Die chemisch-mineralogischen Eigenschaften der Filterrückstände, beispielsweise ein hoher Gehalt an amorpher Kieselsäure sowie eine große spezifische Oberfläche, legen eine Nutzung als puzzolanischer Bindemittelbestandteil nahe. Deshalb müssen Möglichkeiten einer Nutzung als Zusatz in Kompositzementen, Bodenverbesserungsmitteln und Spezialbindemitteln untersucht werden. Im Beitrag wird über die Stoffcharakterisierung, den Nachweis der puzzolanischen Eigenschaften und den Einfluss des Filterrückstands auf die Eigenschaften von Zementmörteln berichtet.
Ganzheitliche Nachhaltigkeitsbewertung von Recyclingoptionen für mineralische Abbruchmaterialien
(2011)
Der Einsatz mineralischer Abbruchmaterialien und anderer Sekundärrohstoffe im Betonbau kann einen wesentlichen Beitrag zu einer nachhaltigen Ressourcenwirtschaft im Bauwesen leisten. Auf diesem Wege können diese Stoffe eine sinnvolle Verwendung finden und weitere umweltrelevante Auswirkungen (Ressourcenverbrauch, Emissionen) gemindert werden. In einem Teilprojekt des DAfStb/BMBFVerbundforschungsvorhabens „Nachhaltig Bauen mit Beton“ wurde das Einsatzpotenzial verschiedener Sekundärrohstoffe in Beton untersucht. Die Kernfrage ist, ob und inwieweit durch den Einsatz eines bestimmten Sekundärrohstoffs die Anforderungen nachhaltigen Bauens erfüllt werden. Zur Beantwortung dieser Frage wurde ein Bewertungskonzept mit einer ganzheitlichen Betrachtung von Nachhaltigkeitsaspekten ausgearbeitet. Die Ganzheitlichkeit umfasst dabei technische, ökologische und ökonomische Aspekte. Das Konzept wurde am Beispiel der bereits im Betonbau eingesetzten rezyklierten Gesteinskörnungen entwickelt. Die Bewertung erfolgt in vier Bewertungsschritten: I. Grundsätzliche Überlegungen, II. Vorteile für das nachhaltige Bauen, III. Alternative Bewertungswege und IV. Sensitivitätsanalysen.
Mörtel für den Neubau und die Instandsetzung sind seit vielen Jahrzehnten im Abwasserbereich für unterschiedliche Bereiche im Einsatz. Zumeist werden diese je nach Anwendungsbereich entsprechend der Vorgaben der Auftraggeber, den Erfahrungen der Hersteller und Verwender sowie den Empfehlungen von Interessenverbänden (z. B. DWA oder DVGW verarbeitet. Zugleich ist eine Reihe von adaptierbaren Regelwerken für ähnliche Produkte aus anderen Anwendungsgebieten verfügbar. Während die Regelwerke zum Schutz und zur Instandsetzung von Betonbauteilen bereits seit ca. 35 Jahren über den Deutschen Ausschuss für Stahlbeton und die Bundesanstalt für Straßenwesen entwickelt und fortgeschrieben werden und seit ca. 20 Jahren auch über ein Mandat der europäischen Kommission im CEN entsprechende Bauproduktnormen im Rahmen der EN 1504 erarbeitet wurden, wurde die Arbeit an einer Produktnorm für zementgebundenen Mörtel für den Bau und die Sanierung von Abwasserkanälen und -leitungen sowie Bauwerken in kommunalen Entwässerungssystemen und Kläranlagen erst im Jahr 2005 aufgenommen. Dieses Regelwerk wurde in Anlehnung an Bauprodukte für andere Anwendungsbereiche erstellt, berücksichtigt darüber hinaus aber die besonderen Anforderungen im Bereich der Abwasserkanäle und -leitungen.
Sustainable evaluation - concept to assess the applicability of secondary aggregates in concrete
(2011)
Nowadays there are several applications of mineral recycling materials and residues. At present an assessment method for the use of secondary raw materials, which considers sustainability aspects, does not exist. In the framework of the German DAfStb/BMBF research project “Sustainable Building with Concrete” an assessment concept was developed. It includes the following four assessment steps: I. Basic considerations, II. Advantages for sustainable construction, III. Alternative paths for application, and IV. Sensitivity analysis. The concept was developed on the basis of recycled concrete aggregates, which are already used according to German standards.
Afterwards, it was applied and verified by the evaluation of the utilisation of municipal solid waste incinerator bottom ashes (referred to MSWI bottom ashes).
Concrete technology was exposed to a rapid development during the last three decades. For the longest time in its history, concrete was considered as a three component System consisting of aggregates, which are bound by the hardened cement paste consisting of hydrated cement. Traditionally, the only way of adjusting the consistency of concrete was using well adjusted aggregates and grading curves and adding excess water to the concrete, accepting that the latter in return reduces strength and durability. During the last three decades, however, concrete has developed further from a three component System towards an (at least) five component system, since the use of mineral additions and Chemical admixtures has become state of the art. Both components are able to enhance the workability, the compactability, and the density of the microstructure with effects on strength, ductility and durability, while cement can be saved in parallel. Due to reasonable use of admixtures and additions, concrete can be designed to match mechanically high performance specifications. Traditionally, cement paste was considered the weakest component in concrete. Flowever, in modern concrete a good paste composition can yield highest performance, passing the role of the mechanical bottleneck towards the aggregates.
Many African countries face serious problems associated with the rapid growth of urban Population and the resulting demand for affordable building materials. In search for appropriate Solutions to improve the Situation, the “LightSHIP” project was initiated, whose aims were to identify the required product specifications, to evaluate possible approaches and ultimately to develop new Building materials for East Africa. It was concluded that these materials should be produced in Africa mainiy from local raw materials; prefabricated, easily transportable construction elements are to be preferred. It is therefore reasonable to focus on artificial stones and partition boards. To be Independent of imported cement, it is suggested to make use of volcanic rocks, which are abundant in East African countries, for lime-pozzoian binders and geopolymers in the production of these construction elements. Future research activities should thus concentrate on assessment of the applicability of available volcanic rocks, the influence of their properties on the resulting binders and the design of appropriate binder-reinforcement-filler Systems.
The SPIN project
(2011)
Globally, cement and concrete experts are at the cutting-edge to sustainable, green, healthy but nonetheless high-performance concrete. In the present age, concrete is not yet well established in Africa, which öfters the unique opportunity to build up a cement and concrete market based on the highest available state of technology. As this industry needs high level expertise, a central issue in implementation of skilled technology is cross-linking research institutions and laboratories. It should not be neglected that concrete is a product with comparably low transport ranges, which means that an improved concrete market will mainly support the local economy without exceeding financial drains to the international market, thus fostering the fight against poverty, which is an urgent need in most African countries.
The SPIN project highlights recent developments in the field of cement and concrete research with impact on the local and global economy. Challenges, future developments and opportunities for the African construction industry are in the focus.
The SPIN project is funded by the European Commission (EC) and supported by the African, Caribbean and Pacific (ACP) Group of States under the project body of the ACP Science and Technology Programme. SPIN is acronym for “Spearhead network for Innovative, Clean and Safe Cement and Concrete Technologies”. The project aims to cross-link experts with industry and policy making bodies, aiming to establish sustainable cement and concrete construction in Africa.
Unter zyklischen Belastungen findet im Beton, wie bei anderen Materialien auch, ein Ermüdungsprozess statt. Im derzeitigen Erkenntnisstand zum Materialverhalten des heterogenen Betons gibt es gerade bei dessen Ermüdungsverhalten momentan noch viele nicht oder nicht ausreichend geklärte Fragestellungen. Deshalb befasst sich der vorliegende Beitrag mit der experimentellen Untersuchung des Ermüdungsverhaltens von Beton, speziell unter hochzyklischen Druckschwellbelastungen. Im Fokus der Untersuchungen stehen dabei die während der gesamten Lebensdauer im Materialgefüge ablaufenden Prozesse, die zu Veränderungen im Materialverhalten und schließlich auch bis zum Ermüdungsversagen führen können. Ziel ist es, eine möglichst realitätsnahe Beschreibung des im Materialgefüge ablaufenden Ermüdungsprozesses zu entwickeln.
Combustion of peroxy-fuels
(2011)
The diffusion flames of organic peroxides exhibit quite different characteristics than hydrocarbons. What makes them interesting to study is their fast burning behaviour. As a result the flame temperature enhances and so does the thermal radiation. Due to all these they demand safe handling during processing. However, they can be utilised at several places in different industries where a fuel with fast burning, high temperature and intense radiation are desired. Some of the possibilities to use them as a main or supporting fuel in a wide range of industrial utilities are the major content of this paper.