Filtern
Dokumenttyp
- Vortrag (70)
Referierte Publikation
- nein (70)
Schlagworte
- Gefahrgutverpackungen (18)
- Lithiumbatterien (13)
- Dangerous goods packagings (9)
- Gefahrguttransport (9)
- ADR (7)
- Fallprüfung (5)
- Sift-proofness (5)
- Thermal Runaway (5)
- Transport (5)
- Dichtheit (4)
Organisationseinheit der BAM
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (70) (entfernen)
Eingeladener Vortrag
- nein (70) (entfernen)
Die Umweltwirkungen auf ein Material werden als Überlapp der Funktionskurven von Materialempfindlichkeit und einwirkenden Umweltparametern betrachtet. Wenn entweder die Empfindlichkeit oder die Beanspruchungen Null sind, ergibt sich auch keine Umweltwirkung und bei beidseitig Werten größer Null das jeweilige Produkt der beiden. Die Akkumulation der nicht-reversiblen Effekte über die Zeit und allen Eigenschaftsänderungen entspricht der Alterung des Materials für den jeweiligen Expositionszeitraum.
Die digitale Umweltsimulation gliedert sich hier in drei Teilaspekte. Ein erster, rein materialwissenschaftlicher Teil hat die Aufgabe, alle relevanten Materialempfindlichkeiten experimentell zu quantifizieren. Ein zweiter – unter Umständen numerischer Teil – hat die Aufgabe, das Bauteil und seine Einbaulage zu digitalisieren und aus den makroskopischen Umgebungsbedingungen die relevanten mikroklimatischen Umweltparameter für alle Oberflächen- oder Volumenelemente zu bestimmen. In einem dritten Teil werden die Einwirkungen über den betrachteten Zeitraum berechnet und kumuliert. Dieses Konzept, das auf den so genannten Expositions-Reaktions-Funktionen (ERF) basiert, wird an Beispielen der Photoxidation erläutert. Dieses Vorgehen wurde schon beim ViPQuali-Projekt als Numerische Umweltsimulation umgesetzt.
Überprüft werden muss das Modell unbedingt an einer realitätsnahen Validierungsbeanspruchung. Hier werden die ermittelten ERFs mit über den kompletten Beanspruchungszeitraum geloggten Umweltparametern gekoppelt, um die berechnete mit der experimentell erfahrenen Alterungswirkung zu vergleichen. Nur so kann sichergestellt sein, dass alle für die Anwendungsumgebung relevanten Materialempfindlichkeiten einbezogen wurden.
Lithium-ion batteries usually consist of numerous individual cells. There is ongoing discussion about enhancing sustainability by considering the replacement of heavily aged or damaged cells. Nevertheless, the planned replacement of individual cells poses significant challenges in ensuring the required reliability and safety of the refurbished device.
Lithium-ion batteries (LIBs) are essential for the electrification of vehicles and play an important role for stationary storage units needed for grid-balancing. Research groups all over the world work on the improvement of LIBs regarding an increase in energy density as well as cycle-life and a decrease in costs. Next to these research topics, a continuously uprising and crucial field is safety features of LIBs, which can be implemented at different levels, such as material, cell, battery and system level.
The abuse/misuse of a LIB can cause an internal release of heat which can trigger a chain of exothermic reactions on cell level. Hence, the cell temperature increases dramatically, causing the so-called thermal runaway (TR), possibly leading to flames and/or explosion of the cell. Moreover, the TR of one cell can initiate the TR of adjacent cells leading to a so-called propagation, possibly, causing the TR of the whole battery. Ideally, easily obtainable key features of a certain cell – such as cathode type, cell format, cell energy and state of charge (SOC) - could allow the prediction of its behaviour under abuse conditions. In the present study, we will discuss the latest result of our safety tests on cell level employing an external heater as TR-trigger. Single cell tests will be analysed regarding different hazardous features during the TR, e.g., cell temperature, occurrence of flames, peak pressure, gas amount and gas composition. Moreover, the possibility of a TR-propagation and the respective propagation speed will be gained from propagation tests utilizing six cells with identical SOC. In total, the study comprises over 200 tests on cell level. The gained data set is analysed in respect to the cell parameters, such as cell format, cell energy, SOC and the cathode type as well as the atmosphere (air vs. N2) present during the test. A special focus is put on the discussion of general conclusions linking cell parameters to TR-effects and propagation behaviour.
The findings regarding common conclusions between key features and TR-effects can enable a rather facile selection process of cells/batteries for certain applications according to specific safety targets. Moreover, it allows to choose cell-specific safety measures, suitable during operation. In further works, the study will be extended to end-of-first life cells yielding important conclusions regarding crucial safety aspects for the implementation of those cells in 2nd-life application. Generally, the presented results can increase the overall understanding of the TR mechanism supporting the design of advanced measures to enhance the safety on cell level in the future.
Lithium-ion battery (LIB) powered devices, such as laptops, mobile phones and power tools are ubiquitous in our daily lives. Moreover, LIBs are essential for the electrification of vehicles, and play an important role for stationary storage units needed for grid-balancing. The improvement of LIBs, in terms of increasing energy density as well as cycle-life and decreasing costs, is tackled by numerous research groups all over the world. In the last years, research regarding safety aspects has steadily gained more interest. The safety of LIBs can be implemented at different levels, such as material, cell, battery and system level.
The abuse/misuse of an LIB can lead to an internal increase in heat which can trigger a chain of exothermic reactions on cell level. Thus, the cell temperature increases dramatically causing the so-called thermal runaway (TR). This process can lead to flames and/or explosion of the cell. Furthermore, the TR of one cell can initiate the TR of adjacent cells causing the so-called propagation, possibly, leading to the TR of the whole battery.
Herein, we will show the latest result of our safety tests on cell level employing an external heater as TR-trigger. Regarding single cell tests, we will compare different hazardous features during the TR, e.g., cell temperature, occurrence of flames, peak pressure, and toxic gases, depending on the cell format, cell energy and the cathode type. The same cell parameters will be used to discuss the results of the propagation tests. Moreover, the influence of the state of charge (SOC) and the present atmosphere (air vs. N2) as well as the repeatability will be discussed. Overall, the study comprises over 180 tests on cell level.
The findings regarding the TR behaviour can be used to create a hazard-classification scheme of LIBs, e.g., allowing the definition of (cell type specific) conditions for a safe transport. Furthermore, the results can increase the general understanding of the TR mechanism promoting the development of advanced measures to enhance the safety on cell level in the future.
Deconvoluting the impact of early-life abuse conditions on the degradation of lithium-ion cells
(2023)
The successful repurposing of degraded lithium-ion (Li-ion) batteries in second-life applications is a vital step towards achieving a circular economy. While reusing aged Li-cells is a promising way of mitigating their overall environmental footprint, it is crucial to anticipate their future safety and performance characteristics . Unfortunately, predicting these properties is a cumbersome task, essentially caused by limited knowledge of the interference of different degradation modes in the cells’ first life.
To still enable estimating of these parameters from a current state, the present study systematically investigates the impacts of abusive conditions in an early phase of the cells’ life on their subsequent degradation behavior. For this purpose, individual Li-cells are initially stressed by different measures such as overcharging, deep-discharging, plating, and deliberate combinations of the aforementioned methods. Electrochemical performance indicators are monitored during subsequent cycling of the cells which provides insights into the interdependencies of different degradation modes induced by specific stress conditions. In this manner, it is clarified whether or not the total degradation can be determined by a convolution or a superposition of individual deterioration effects and, thus, be described as a multidimensional state function.
This knowledge will finally contribute to a better understanding of the performance and safety behavior of degraded Li-ion batteries which can help to successfully implement them into second-life applications.
The BAMline at the synchrotron X-ray source BESSY II (Berlin, Germany) is supporting researchers especially in materials science. As a non-destructive characterization method, synchrotron X-ray imaging, especially tomography with hard X-Rays, plays an important role in structural 3D characterization. The imaging capabilities allow for in-situ and operando experiments. In this presentation the equipment, data handling pipeline as well as various examples from material science are presented.
Im Vortrag wird der Stand der Weiterentwicklung der ISO 16103 dargestellt, in der Regelungen zur Qualitätssicherung bei der Herstellung von Recycling-Kunststoffen und daraus hergestellter Gefahrgutverpackungen enthalten sind. Darüber hinaus wird auf die Verbindungen zu den UN Model Regulations und zum ADR eingegangen und welche Konsequenzen sich daraus für die Zulassung und die Anerkennung des Qualitätssicherungsprogramms ergeben.
Die in den von der BAM anerkannten Prüfstellen für Gefahrgutverpackungen gängigen Schüttwinkel-Messmethoden werden verglichen, anhand der Messung an fünf pulverförmigen oder körnigen Stoffen mit gefährlichen Eigenschaften. Zusätzlich wird die Untersuchung des Einflusses einer unterschiedlichen klimatischen Vorlagerung vorgenommen.
For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like ADR/RID require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model which assesses impact target deflection. An approximation quality of over 90 % was achieved. As a result, new evaluation criteria are proposed. Firstly, a method for identifying critical impact target designs is provided. Secondly, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst-case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings.
The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed.
In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials.
The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods.
In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning.
Im Zusammenhang mit den Untersuchungen zu den Möglichkeiten von gekühlten Transporten von Lithiumbatterien werden unterschiedliche Zerstörungsmethoden vorgestellt und diskutiert. Insbesondere wird dabei das neu entwickelte Nageltool und die vorläufigen Untersuchungen für den Einfluss von Ultratiefkühlung auf unbeschädigte Lithiumbatterien vorgestellt.
In Germany, BAM is the competent authority in the field of dangerous goods transport. The international dangerous goods transportation rules are presented and their adaptation into German law is described. BAM is responsible for dangerous goods packaging testing, manufacturer surveillance, packaging approvals and inspection of IBC and provides “Gefahrgutregeln” (GGR) to define the processes, e.g. of dangerous goods packagings approvals and surveillance.”
For the realization of a sustainable energy economy, it is of great importance to develop CO2 -neutral methods producing multi-carbon organic chemicals used as feedstock in the chemical industry as well as carbon-neutral fuels. A promising method to alleviate the greenhouse effect and thereby forming value-added chemicals or syngas as an energy carrier, is through the electrochemical CO2 reduction reaction (CO2RR). In this work, a bioelectrotechnological approach is developed, in which the CO2RR reaction products (CO and H2) are directly fed to bacteria (acetogens), who use them as “reduction equivalents” to further metabolize CO2 to valuable carbon compounds. Therefore, a bio-electrochemical system consisting of a bioreactor coupled to a CO2 electrolysis cell will be established. Currently, scarce catalysts such as Ag and Au are used as for the CO2RR which may hamper the use of decentral CO2 conversion technology for cost reasons.
The technological viability of the bacteria-assisted electrolysis depends on the usage of efficient, biocompatible, and selective electrocatalysts prepared from inexpensive precursors. Porous transition metal and nitrogen co-doped carbons (M-N-Cs) have emerged as precious-metal free electrocatalysts for the direct electrochemical reduction of CO2 into CO and are excellent candidates for scale-up and deployment in technological applications. Furthermore, Co/Ni/Zn functioning as the catalytically active sites will be used, as they are expected to depict non-bactericidal properties in contrast to Cu and Ag catalysts. The non-bactericidal property could e.g., allow for application within the hybrid device (bio-electrochemical system), without the need to separate bacteria and cathode catalyst. The MNCs with the most promising electrocatalytic activity and selectivity will be evaluated in abiotic conditions in the hybrid bio-electrochemical reactor system.
Investigation of degradation of the aluminum current collector in lithium-ion batteries by GD-OES
(2022)
Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs.
High-resolution absorption isotopic spectrometry as a tool for aging studies of Li-ion batteries
(2022)
Lithium (Li) is the key element in the manufacturing of batteries. Isotopic study of Li may help to identify the causes of battery aging due to isotopic fractionation during charge/discharge cycles.
Isotopic ratio determination is based on monitoring the isotopic components of lithium by their spin-orbit coupling and its isotopic shift of about 15 pm for the 22P←22S electronic transition around 670.788 nm. In this work, we propose improvements to our previous work [1] by using a higher-resolution double echelle modular spectrometer (HR-DEMON II) coupled to a continuum source graphite furnace atomic absorption spectrometer (HR-CS-GF-AAS) for the isotopic analysis of Li.
The data analysis was carried out by using a decision-tree-based ensemble machine learning (ML) algorithm (XGBoost). A set of samples with 6Li isotope amount fractions ranging from 0.0004 to 0.99 mol mol-1 was used for the algorithm's training. Subsequently, the procedure was validated by a set of stock chemicals (Li2CO3, LiNO3, LiCl, and LiOH) and a BAM candidate reference material, a cathode material (NMC111). Finally, the ML model was applied to determine the isotope ratio of geological samples, including anorthosite, granite, soil, rhyolite, nepheline syenite, and basalt and battery samples. These samples were measured as digested without any further purification step.
Improvements in the optical resolution resolve the lithium isotopic components of the atomic spectra. In the studied geological samples, were found δ7Li values between -0.5 and 4.5 ‰ with a precision range of 1 to 2 ‰. In addition, the proposed method was validated with multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS), and these results are comparable and compatible.
Due to the high damping mechanical properties of fibreboard materials, corrugated fibreboard boxes are widely used as transport packages of dangerous goods.
Since there is a hazard of vertical impact within the distribution system, drop tests are performed as design type tests to assess the package’s ability to withstand damage. However, there is little information in this context regarding the mechanical response of a filled fibreboard box.
This work aims to propose a concept utilizing experimental drop test results by means of finite-element (FE) analyses in order to predict the damage resistance of complete, filled corrugated fibreboard boxes which are ready for transportation.
Fazit:
Nachteile der Schüttwinkel-Messmethoden:
Einschränkungen bei der Anwendbarkeit auf Füllgüter mit bestimmten Eigenschaften;
Die einzelnen Methoden liefern dann unterschiedliche Ergebnisse (statist. signifikante Abweichung der Mittelwerte);
Schlechte Wiederholbarkeit;
Bedienereinfluss spielt Rolle;
Gewährleistung des Arbeitsschutzes schwierig;
Bestimmung des Hausner-Faktors:
Keins dieser Defizite
Mögliche Abhilfemaßnahmen:
Prüfbericht und Zulassungsschein sollten zumindest die Methode angeben, die zur Messung des Schüttwinkels 𝛼 eingesetzt wurde;
Einheitliches Verfahren zur Schüttwinkelmessung (DIN-Methode)?
Umstellung des Systems auf einen alternativen Parameter zur Bestimmung der Fließeigenschaften:
Hausner-Faktor 𝐻:
Bessere Wiederholbarkeit der Ergebnisse;
Zuverlässige Anwendbarkeit auch auf Extremfälle von Schüttgütern;
Sicherere Handhabung von Gefahrgütern
The mechanical and geometrical properties of impact targets greatly influence the outcome of a drop test. The International Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) as well as ISO 2248 describe the characteristics of impact targets for drop tests of dangerous goods packagings.
According to these regulations, the impact target’s surface needs to be unyielding, under testing conditions non-deformable, flat, and integral with a mass at least 50 times that of the heaviest packaging to be tested. The problem is that many production facilities, especially manufacturers of corrugated fibreboard boxes, do not have their own testing device with the required 50 times mass ratio of the impact target for a regulation compliant drop test during series production. Furthermore, at UN level it is considered necessary to revise these requirements.
In the present paper, the impact target requirements are examined in detail and compared with those in other technical areas (e.g., impact target for container for the transport of radioactive materials). A research method is being developed to investigate the dependency between the mass ratio of the packaging and the target as well as the damage resistance of a drop tested package in relation to specific design characteristics. The results are of high relevance for industry purposes and intended to ensure a uniform level of safety assessment for the mechanical testing of dangerous goods packagings.
To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety.
Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized.
Second life für E-Akkus
(2021)
Aktuelle Versuche der BAM
(2021)
Das Verhalten von Batteriezellen bei Beschädigung ist von hoher Bedeutung für die Einschätzung der Sicherheit bei Transport, Lagerung sowie Verwendung. Die Auswirkungen bei Schädigung hängen natürlich von der Art der Zelle, jedoch auch vom Ladezustand und der Schädigungsmethode ab.
Im Vortrag werden die Schädigungsversuche von Einzelzellen sowie Propagationsversuche an der BAM für verschieden Ladezustände präsentiert. Des Weiteren werden die aktuellen Vorgaben/Empfehlungen bezüglich der Lagerung von Lithium-Batterien kurz dargestellt. Darüber hinaus werden die neusten Entwicklung bezüglich der Vorgaben für den Transports von Natrium-Ionen-Batterien vorgestellt und diskutiert.
Lithium ion batteries (LIBs) are omnipresent in our daily lives. LIBs power our laptops and mobile phones, are the energy storage of choice for the electrification of vehicles, and play a vital role in the layout of the storage devices needed for the balancing of the grid.
Research groups all over the world work on the improvement of LIBs, e.g., an increase in energy density and cycle-life as well as a decrease in costs. In recent years, investigations concerning the LIB’s safety continuously gain importance, especially, pushed by incidents with electric vehicles. They are multiple levels at which safety measures can be implemented, i.e., material, cell, battery and system level. Accordingly, the behaviour of LIBs under abuse/misuse conditions are often investigated on those levels.
Here, we focus on the safety on cell level. Generally, the abuse/misuse leads to an increase in heat in the cell at worst triggering a chain of exothermic reactions. Hence, the cell’s temperature rapidly increases leading to the so-called thermal runaway (TR) possibly accompanied by flames and/or explosion of the cell. Herein, different hazardous features during the TR of different commercial cells are analysed such as temperature, flames, projectiles and toxic gases. In order to gain further insights on the parameters influencing the TR, different type of initiation modes, e.g., external heating, overcharging, nail penetration and external short circuiting are utilized. Moreover, the state of charges (SOCs) are varied to differ the amount of electrical energy present in the cells.
Next to the characteristic of the TR of a single cell, the investigation of the propagation of the TR from one cell to another is an important parameter, as a battery is usually composed of multiple cells. Due to the close packaging of the single cells, the TR of one cell is often able to initiate the TR of the surrounding cells, finally, causing the TR of the whole battery. Herein, the propagation ability is studied depending on the cell type and SOC. Finally, the results will be used to formulate (cell specific) conditions for a safe transport of LIBs. Moreover, the gained knowledge can support the development of advanced measures to increase the safety on cell level in the future.
Das Verhalten von Batteriezellen bei Beschädigung ist von hoher Bedeutung für die Einschätzung der Sicherheit bei Transport, Lagerung sowie Verwendung. Vor allem im Zusammenhang mit dem exponentiell wachsenden Sektor der Lithium-Batterien kam es in der Vergangenheit immer wieder zu kritischen Vorfällen. Hierbei haben Lithium-Metall-Batterien, welche elementares Lithium enthalten, den Ruf besonders gefährlich zu sein. Um dieses Thema bewerten zu können, werden im Vortrag die Unterschiede zwischen Lithium-Ionen- und Lithium-Metall-Batterien erläutert und experimentelle Studien des Verhaltens von aktuellen Systemen bei Schädigung verglichen. Darüber hinaus wird auf die Eigenschaften sowie das Sicherheitsverhalten von zukünftigen Lithium- bzw. Natrium-Batterien eingegangen.
In den von der BAM anerkannten Prüfstellen kommen derzeit unterschiedliche Methoden der Schüttwinkelmessung zum Einsatz. Es ist unklar, welche dieser Methoden sich prinzipiell für welche Füllgüter eignen. Daher werden derzeit systematische Untersuchungen an der BAM durchgeführt, die im folgenden vorgestellt werden.
The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape.
Vergleichende Fallversuche zur Bewertung von Fallfundamenten - Ausblick auf Untersuchungen der BAM
(2020)
Oft verfügen Produktionsstätten über bereits verbaute Fallfundamente, die nicht das geforderte Massenverhältnis von 1:50 aufweisen. Gemäß ADR ist jedoch auf dem Niveau der Musterprüfung zu prüfen. Es ist daher fraglich, ob die Prüfungen im Rahmen der Eigenüberwachung und die Baumusterprüfungen vergleichbare Ergebnisse liefern, wenn die Fallfundamente unterschiedlich beschaffen sind. Ziel der Untersuchungen ist daher die Entwicklung eines Untersuchungs- und Prüfkonzepts für bereits verbaute Fallfundamente für Gefahrgutverpackungen im Rahmen einer ingenieurwissenschaftlichen Promotionsarbeit.
Es ist bislang noch keine einheitliche Vorgehensweise und kein bestimmtes Prüfverfahren für die Schüttwinkelmessung festgelegt. Bei den Prüffüllgütern handelt es sich nicht nur um gefährliche Ersatzfüllgüter, sondern zum Teil auch um gefährliche Originalfüllgüter. Es liegen noch keine systematische Untersuchungen darüber vor, welche der in den Prüfstellen gängigen Methoden sich prinzipiell für die Anwendung bei bestimmten Extremfällen von Füllgütern eignen. Ziel der Untersuchungen ist daher ein systematischer Vergleich bei der Anwendung verschiedener in den Prüfstellen gängiger Schüttwinkelmessmethoden.
The Dangerous Goods Regulations currently do not include limit leakage rates or sensitivity requirements for industrial leak testing procedures that are equivalent to the bubble test, which is the prescribed test method for design type testing of dangerous goods packagings. During series production of such packagings, various methods are used which often do not reach the sensitivity of the bubble test. Based on a suitable pragmatic approach, its sensitivity under industrial conditions can be considered 10-4 Pa m³/s (SLR).
For the selection of a suitable industrial leak testing method, however, factors other than the sensitivity are also important, for example flow direction, pressure level and automatability. The following methods are in principal suitable and equally effective as the bubble test: pressure rise test (vacuum chamber), ultrasonic bubble leak detection and gas detection methods (pressure technique by accumulation and vacuum chamber technique).
To ensure a uniform test level during design type testing and production line leak testing and therefore a comparable safety level as required by the Dangerous Goods Regulations, it is necessary to include a more precise specification in these regulations. On the one hand, this requires an information about the sensitivity of the bubble test, on the other hand, the inclusion of a list of suitable, equally effective industrial test methods with their specific boundary conditions
Sicherheitskonzepte werden für die verschiedenen Szenarien für Lithiumakkus benötigt: Vor allem für den Bereich der Lagerung gibt es im Moment nur wenige Vorgaben. Im Vortrag werden verschiedene Brandschutzkonzepte vorgestellt. Für die Lagerung werden Empfehlungen ausgesprochen, die teilweise an die Vorgaben der Transportvorschriften anknüpfen.
Transport von defekten Lithiumbatterien - die BAM setzt die Vorschriften des internationalen Gefahrguttransportrechts für defekte Lithiumbatterien um. Um die Kompetenz hierfür sicherzustellen, bedarf es eigener Forschungstätigkeit. Auch im zuständigen UN Gremium werden Untersuchungen durchgeführt, an denen die BAM beteiligt ist.