Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (15)
- Vortrag (13)
- Zeitschriftenartikel (12)
- Posterpräsentation (6)
Sprache
- Englisch (33)
- Deutsch (12)
- Mehrsprachig (1)
Schlagworte
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (46) (entfernen)
Eingeladener Vortrag
- nein (13)
A novel distributed acoustic sensing technique is proposed that exploits both phase and amplitude of the Rayleigh backscattered light to quantify the environmental variation. The system employs a wavelength-scanning laser and an imbalanced Mach-Zehnder interferometer to acquire the reflection spectra and the phase of the detected light, respectively. Fading-free and low-frequency measurements are realized via the crosscorrelation of the reflection spectra. The discrete crosscorrelation is used to circumvent the nonlinear frequency sweeping of the laser. Based on the phase of the backscattered light, it is possible to quantify fast environmental variations. The whole system requires no hardware modification of the existing system and its functionality is experimentally validated. The proposed system has the potential to monitor ground motion/movement at very low frequency band like subsidence around mining areas and at high frequency band like earthquakes and vibrations induced by avalanches.
A novel DAS setup based on geometric phases in coherent heterodyne detection is applied for the first time to the characterisation of the Earth’s subsurface. In addition, an optimisation of the proposed setup in terms of its spatial resolution is also presented for the first time. The surface waves are generated by strong blasts of 25 kg of explosives at a dedicated test site. A 10 km dark fiber link in the vicinity of the test site connected to the test setup records the resulting strain signals. The spike-free and low-noise strain data thus obtained minimize post-processing requirements, making the setup a candidate for real-time seismic monitoring. An analysis of the dispersion characteristics of the generated surface waves is performed using a recently reported optimised seismic interferometric technique. Based on the dispersion characteristics, the shear wave velocities of the surface waves as a function of the depth profile of the Earth’s crust are determined using an optimised evolutionary algorithm.
Zur Bewertung der Widerstandsfähigkeit von Schutzobjekten und Bauteilen gegen Explosionsbeanspruchung führt die Bundesanstalt für Materialforschung und -prüfung (BAM) regelmäßig Sprengversuche im Realmaßstab auf einem Testgelände durch.
Solche Versuche sind planungs- und ressourcenintensiv, sodass sie zunehmend durch numerische Simulationen ergänzt bzw. ersetzt werden.
Aktuelle Forschungsarbeiten zielen darauf ab, neue Berechnungsmethoden und Materialmodelle zu entwickeln, mit denen die Bestimmung der Bauteilantwort sowie die daraus resultierende Schädigung nach einem Explosionsereignis möglich sind.
Zur Validierung solcher Ansätze ist es notwendig, systematische Versuche mit unterschiedlichen Szenarien durchzuführen, bei denen die relevanten Parameter mit Hilfe verschiedener Messmethoden aufgezeichnet werden.
Wavelength scanning coherent optical time domain reflectometer (WS-COTDR) is a good candidate to spatially resolve the environmental information at comparatively low frequency. This paper reveals it can also work as a traditional optical time domain reflectometer (OTDR) to identify Fresnel reflection by averaging the obtained signal over the wavelength scanning range. Simultaneous distributed vibration sensing and a traditional OTDR measurement are experimentally demonstrated using the WS-COTDR system.
Wavelength scanning coherent optical time domain reflectometer (WS-COTDR) is a good candidate to spatially resolve the environmental information at comparatively low frequency. This paper reveals it can also work as a traditional optical time domain reflectometer (OTDR) to identify Fresnel reflection by averaging the obtained signal over the wavelength scanning range. Simultaneous distributed vibration sensing and a traditional OTDR measurement are experimentally demonstrated using the WS-COTDR system.
Im vorliegenden Bericht wurde untersucht, Spanndrahtbrüche in einem Brückenträger sowohl mittels Schallemissionsanalyse (SEA) als auch mit (eingebetteter) verteilter faseroptischer akustischer Sensorik (DAS) zu erkennen. Die Ergebnisse zeigen, dass die Bruchsignale anhand beider Messverfahren detektiert werden können. Die jeweils detektierten Drahtbrüche werden miteinander verglichen. Durch eine Gegenüberstellung werden SEA und DAS detailliert dargestellt.
Geometric phase measured per beat period in a ϕ-OTDR based on coherent heterodyne detection is used to measure strain. Proposed method is robust to polarisation mismatch fading as a polarisation mismatch between interfering beams is not a hindrance to the measurement of the geometric phase. The Geometric phase is a function of the intensities of the interfering beams as well as the envelope of the beat signal. Its calculation does not require phase unwrapping and accordingly does not suffer the phase unwrapping errors. It is required to be equated with the traditionally measured phase by applying a scaling factor. The spatial resolution of the measured strain is reduced as it is calculated per beat period. Results are verified using a piezo-electric transducer inline a fiber-under-test.
A phase-sensitive optical time domain reflectometer based on coherent heterodyne detection of geometric phase in the beat signal of light, is reported for the first time to our knowledge. The use of the geometric phase to extract strain makes it immune to polarisation diversity fading. This is because a polarisation mismatch between the interfering beams is not a hindrance to its measurement. The geometric phase is calculated using the amplitude of the beat signal and individual beam intensities without any need for phase unwrapping. It is measured per beat period and can be equated with the traditionally measured dynamic phase with appropriate scaling. The results show that the system based on the geometric phase successfully measures strain, free from polarisation mismatch fading and phase unwrapping errors, providing a completely novel solution to these problems.
After describing the basics of distributed fiber optic sensing in general and distributed fiber optic acoustic sensing (DAS) in particular, several currently and previously investigated fields of application of DASin infrastructure monitoring and seismic monitoring are presented. A focus is placed on seismic measurements and DAS measurements determining the dynamic responses of concrete structures to certain stimuli.
We report, to our knowledge for the first time on simultaneous distributed temperature and strain sensing in a standard telecom optical fiber using a machine learning assisted Brillouin frequency domain analysis (BOFDA) system. The well-known temperature and strain cross-sensitivity problem is addressed by developing a BOFDA system with a high signal-to-noise ratio and applying machine learning. The spectrum consists of four highly resolved peaks, whose Brillouin frequency shifts are extracted and serve as features for the machine learning algorithms. The spectra result from a 450-m standard SMF-28 optical fiber, and particularly from a segment of 30 m. This fiber segment is coiled around a stretcher and placed in a climate chamber. The applied temperature and strain values range from 20 °C to 40 °C and from 0 µɛ to 1380 µɛ, respectively. The total measurement time to achieve a high SNR and resolve four peaks with a spatial resolution of 6 m is 16 min. To discriminate temperature and strain effects, simple frequentist and more sophisticated Bayesian-based algorithms are employed with the powerful Gaussian process regression (GPR) delivering the best performance in terms of temperature and strain errors, which are found to be 2 °C and 45 µɛ, respectively. These errors are calculated using leave-one-out cross-validation, so that an unbiased estimation of the sensor’s performance is provided.
In this paper, we present a collection of machine learning assisted distributed fiber optic sensors (DFOS) for applications in the field of infrastructure monitoring. We employ advanced signal processing based on artificial neural networks (ANNs) to enhance the performance of the dynamic DFOS for strain and vibration sensing. Specifically, ANNs in comparison to conventional and computationally expensive correlation and linearization algorithms, deliver lower strain errors and speed up the signal processing allowing real time strain monitoring. Furthermore, convolutional neural networks (CNNs) are used to denoise the dynamic DFOS signal and enable useable sensing lengths of up to 100 km. Applications of the machine learning assisted dynamic DFOS in road traffic and railway infrastructure monitoring are demonstrated. In the field of static DFOS, machine learning is applied to the well-known Brillouin optical frequency domain analysis (BOFDA) system. Specifically, CNN are shown to be very tolerant against noisy spectra and contribute towards significantly shorter measurement times. Furthermore, different machine learning algorithms (linear and polynomial regression, decision trees, ANNs) are applied to solve the well-known problem of cross-sensitivity in cases when temperature and humidity are measured simultaneously. The presented machine learning assisted DFOS can potentially contribute towards enhanced, cost effective and reliable monitoring of infrastructures.
This contribution introduces an investigation of a large-scale prestressed concrete bridge model (“BLEIB” structure at the BAM-TTS open air test site) by means of on-site cooperative measurements. This bridge has an external post-tensioning system and has been instrumented with the ultrasonic transducers, temperature sensors and optical fibers for Distributed Acoustic Sensing (DAS). Our experiment was designed to test the suitability of the novel 6C sensors developed within the framework of the GIOTTO project – the IMU50. The IMU50 sensor enables vibration measurements in translation along three axes and rotation around three axes. The geophone sensors were considered for complementary measurements of vertical velocity response. In the experiment, several perturbations were achieved by controlling the external influence factors such as loading and prestressing changes. The aim of the integrated measurement strategy was to fully observe the results of the condition change and to verify the effectiveness of multiple sensors for bridge monitoring.
The geometric phase in the beat signal from coherent interference of two frequency-offset light beams is measured using a novel distributed optical fiber sensing setup. In a fiber optic medium, with changing beam intensities, to the best of our knowledge, ours is the first measurement of the mentioned geometric phase. Experimental results of applying a 100-Hz sinusoidal stimulus to a polarization scrambler and a piezoelectric transducer inline to an optical fiber are presented. The results may enable novel distributed fiber sensing techniques.
In the last few years, the use of machine learning has emerged in the field of distributed fiber optic sensors as a promising approach to enhance their performance and provide new capabilities. In this study, we use machine learning for simultaneous measurements of temperature and humidity in polyimide (PI)-coated optical fibers based on Brillouin Brillouin optical frequency domain analysis (BOFDA). Different non-linear machine learning algorithms are employed, namely polynomial regression, decision trees and artificial neural networks (ANNs), and their discrimination performance is benchmarked against that of the conventional linear regression. The performance is evaluated using leave-one-out cross-validation to ensure that the models are reliable and able to generalize well on new data. We show that nonlinear machine learning algorithms outperform the conventional linear regression and thus could pave the way towards simultaneous cost-effective temperature and humidity distributed sensing, which has the potential to find attractive new applications in the field of civil and geotechnical engineering, from structural health monitoring of dikes and bridges to subsea cables and long pipelines corrosion detection.
Distributed humidity fiber-optic sensor based on BOFDA using a simple machine learning approach
(2022)
We report, to our knowledge for the first time, on distributed relative humidity sensing in silica polyimide-coated optical fibers using Brillouin optical frequency domain analysis (BOFDA). Linear regression, which is a simple and well-interpretable algorithm in machine learning and statistics, is utilized. The algorithm is trained using as features the Brillouin frequency shifts and linewidths of the fiber’s multipeak Brillouin spectrum. To assess and improve the effectiveness of the regression algorithm, we make use of machine learning concepts to estimate the model’s uncertainties and select the features that contribute most to the model’s performance. In addition to relative humidity, the model is also able to simultaneously provide distributed temperature information addressing the well-known cross-sensitivity effects.
Die verteilte faseroptische akustische Sensorik (DAS) wird vorgestellt, hinsichtlich ihrer Leistungsfähigkeit beschrieben und verschiedenste Anwendungsfelder, z.B. für das Zustandsmonitoring oder für seismische Messungen, beispielhaft gezeigt. Zudem werden mögliche Anwendungsfelder von DAS für den Kontext Kerntechnische Entsorgung (KTE) und Rückbau aufgezeigt.
We present a preliminary investigation on distributed humidity monitoring during the drying process of concrete based on an embedded polymer optical fiber (POF). The water dissipated into the POF changes several properties of the fiber such as refractive index, scattering coefficient and attenuation factor, which eventually alters the Rayleigh backscattered light. The optical time Domain reflectometer (OTDR) technique is performed to acquire the backscattered signal at the wavelengths 650 nm and 500 nm, respectively. Experimental results show that the received signal increases at 650 nm while the fiber attenuation factor clearly increases at 500 nm, as the concrete dries out. In the hygroscopic range, the information retrieved from the signal change at 650 nm agrees well with the measurement result of the electrical humidity sensors also embedded in the concrete sample.
Division 8.6's competencies and work focus areas are shortly outlined and investigations related to pipeline and submarine power cable monitoring using different distributed fiber optic sensing techniques are presented with some results. Furthermore, BAM 8.6 expertise in the field of sensor application, embedding and integration is shown.
Time-Efficient Convolutional Neural Network-Assisted Brillouin Optical Frequency Domain Analysis
(2021)
To our knowledge, this is the first report on a machine-learning-assisted Brillouin optical frequency domain analysis (BOFDA) for time-efficient temperature measurements. We propose a convolutional neural network (CNN)-based signal post-processing method that, compared to the conventional Lorentzian curve fitting approach, facilitates temperature extraction. Due to its robustness against noise, it can enhance the performance of the system. The CNN-assisted BOFDA is expected to shorten the measurement time by more than nine times and open the way for applications, where faster monitoring is essential.
The feasibility of traffic monitoring along a major urban road using Distributed Acoustic Sensing (DAS) is demonstrated. We present measurement results of conventional intensity-based DAS along a dark fiber in a tubed fiber optic cable buried roadside. With only minimal postprocessing different classes of traffic participants can be distinguished (cars, bikes, pedestrians). Different methods for pre-processing raw data are compared, especially with regard to providing suitable inputs for pattern recognition algorithms. Furthermore, the various challenges for automatized vehicle detection and classification related to varying sensitivity and inhomogeneous signal propagation are discussed. Sensitivity fluctuations and variations are in part inherent to the measurement technology and originate in part in ground conditions. The measurement quality and usefulness for traffic monitoring of intensity-based DAS is compared to that of state-of-the-art phase-resolved DAS, allowing quantitative evaluation of vibration signals.
The feasibility of traffic monitoring along a major urban road using Distributed Acoustic Sensing (DAS) is demonstrated. We present measurement results of conventional intensity-based DAS along a dark fiber in a tubed fiber optic cable buried roadside. With only minimal postprocessing different classes of traffic participants can be distinguished (cars, bikes, pedestrians). Different methods for pre-processing raw data are compared, especially with regard to providing suitable inputs for pattern recognition algorithms. Furthermore, the various challenges for automatized vehicle detection and classification related to varying sensitivity and inhomogeneous signal propagation are discussed. Sensitivity fluctuations and variations are in part inherent to the measurement technology and originate in part in ground conditions. The measurement quality and usefulness for traffic monitoring of intensity-based DAS is compared to that of state-of-the-art phase-resolved DAS, allowing quantitative evaluation of vibration signals.
Fiber optic Distributed Acoustic Sensing (DAS) is an emerging method for many different monitoring purposes, enabling a spatially and temporally resolved collection of acoustic and vibration information over many kilometers. DAS, thus being a "dynamic" sensing technique, allows for online condition monitoring and the detection and localization of threats or hazards in real time via characteristic acoustic/vibration states and their changes or via occurring anomalous signals, respectively.
At BAM, we have employed this technology for a number of different applications of monitoring of large infrastructures, e.g., bridges, pipelines, submarine power cables or railway tracks. Currently, we are investigating the use of DAS for further innovative uses, which aim at facilitating the energy transition, enabling "smart" infrastructure and providing the basis for comprehensive hazard monitoring and warning systems, respectively. Our research fields include fiber optic borehole monitoring in the context of hydrogen storage caverns, traffic and road monitoring, using DAS for earthquake monitoring in urban areas for disaster management and long-term monitoring of large-scale subsidence caused by mining activities. Another new topic is structural health monitoring in concrete structures in the framework of the FSP Security.
In this talk, we will first briefly present the basics and capabilities of DAS. Then, we will portray our previous and current works related to this technology and show some attractive results. Finally, we will discuss our upcoming projects on exciting new applications of DAS.
Faseroptische Sensorsysteme bieten heute die Möglichkeit des Online-Monitorings von sensiblen, für die Energieversorgung wichtigen Betriebsmitteln. Insbesondere Hochenergiekabel, wie diese sowohl im Offshore- als auch im Onshorebereich eingesetzt werden, sind prädestiniert für eine zustandsorientierte Überwachung. Gerade Hochspannungshochenergiekabel sind Betriebsmittel, die im Falle eines Ausfalls durch Schäden mit hohen Reparatur- und Folgekosten verbunden sind. Mit dem Einsatz von faseroptischen Sensoren sind mechanische Einflüsse wie Vibrationen z. B. verursacht durch Ankerfall, Temperaturhotspots oder auch Teilentladungsaktivitäten an dezidierten vulnerablen Stellen wie Kabelendverschlüssen oder –muffen über längere Kabelstrecken detektierbar. Der Einsatz von im Rahmen des Verbundprojekts Monalisa entwickelter faseroptischer Diagnosetechnik in Verbindung mit faseroptischen Sensoren wird hier aufgezeigt.
Die Verwendung von Methoden des Maschinellen Lernens (ML) und der Künstlichen Intelligenz (KI) im Fachbereich 8.6 Faseroptische Sensorik wird dargestellt. Die vielfältigen Möglichkeiten, Machine Learning auf Basis Künstlicher Neuronaler Netze (ANN) für eine schnelle und effiziente Datenverarbeitung eizusetzen werden demonstriert. Hierfür werden Beispiele für die Anwendungszwecke Messgrößenberechnung, Entrauschen, Interpolation, Bildverarbeitung und Messdatenauswertung aufgezeigt.
Anwendungsfelder von verteilter faseroptischer akustischer Sensorik (DAS) werden anhand von früheren, gegenwärtigen und zukünftigen Projekten an der BAM vorgestellt und die Leistungsfähigkeit von DAS demonstriert. Die dargestellten Anwendungen sind Monitoring von Rohrleitungen, von Unterseekabeln, von Zügen und Gleisen, von Brücken, von Strassen und Verkehr, von Erdbebenauswirkungen in urbanen Gebieten, von Bohrlöchern im Kontext Erdgasspeicher und für Exploration und Monitoring von Untergründen für Geothermie-Anwendungen.
Die Eigenschaften von optischen Fasern und faseroptischen Sensoren werden beschrieben und die Funktionsweise von verteilter faseroptischer akustischer Sensorik (DAS) erklärt. Die Verwendung von DAS für Zustandsmonitoring vor allem von Infrastruktur und Anlagen wird motiviert. Im Folgenden wird die Einsetzbarkeit von DAS für verschiedenste Anwendungen anhand einiger Beispiele (vergangene und gegenwärtige Projekte der BAM zum Thema DAS für Infrastrukturmonitoring) gezeigt. Diese betreffen das Monitoring von Rohrleitungen/Pipelines, von Energiekabeln, von Gleisanlagen und Zügen, von Brücken und von Strassen und Strassenverkehr.
We present a technique for distributed temperature gradient sensing in real-time along an optical fiber utilizing simple amplitude-based direct-detection coherent optical time domain reflectometry (C-OTDR) and a special sensing fiber. Our technique enables us to determine phase changes or low-frequency variations of the C-OTDR signal stemming from temperature variations. The distinct feature of the used sensing fiber is its structuring with equidistant strongly scattering dots. Consecutive pairs of these scatterers form the dominant local interferometers, effectively overwriting the otherwise highly nonlinear transfer function of common optical fiber. This enables a quasi-phase-resolved evaluation of perturbation responses originating from temperature changes at sensor positions between the scatterers. Using our method, we show the measurement of a nonlinear temperature transient from a heating process with a maximum temperature gradient of 0.8 °C over 20 s and a total temperature increase of 28.4 °C. This method requires almost no post-processing and can be used for simultaneous distributed vibration sensing (DVS) and quantification of local temperature gradients in a single fiber, e.g., for the use in condition monitoring of infrastructure or industrial installations.
We present a technique for distributed temperature gradient sensing in real-time along an optical fiber utilizing simple amplitude-based direct-detection coherent optical time domain reflectometry (C-OTDR) and a special sensing fiber. Our technique enables us to determine phase changes or low-frequency variations of the C-OTDR signal stemming from temperature variations. The distinct feature of the used sensing fiber is its structuring with equidistant strongly scattering dots. Consecutive pairs of these scatterers form the dominant local interferometers, effectively overwriting the otherwise highly nonlinear transfer function of common optical fiber. This enables a quasi-phase-resolved evaluation of perturbation responses originating from temperature changes at sensor positions between the scatterers. Using our method, we show the measurement of a nonlinear temperature transient from a heating process with a maximum temperature gradient of 0.8 °C over 20 s and a total temperature increase of 28.4 °C. This method requires almost no post-processing and can be used for simultaneous distributed vibration sensing (DVS) and quantification of local temperature gradients in a single fiber, e.g., for the use in condition monitoring of infrastructure or industrial installations.
We present results demonstrating several beneficial effects on distributed fiber optic vibration sensing (DVS) functionality and performance resulting from utilizing standard single mode optical fiber (SMF) with femtosecond laser-inscribed equally-spaced simple scattering dots. This modification is particularly useful when using traditional single-wavelength amplitude-based coherent optical time domain reflectometry (C-OTDR) as sensing method. Local sensitivity is increased in quasi-distributed interferometric sensing zones which are formed by the fiber segments between subsequent pairs of the scattering dots. The otherwise nonlinear transfer function is overwritten with that of an ordinary two-beam interferometer. This linearizes the phase response to monotonous temperature variations. Furthermore, sensitivity fading is mitigated and the demodulation of low-frequency signals is enabled. The modification also allows for the quantitative determination of local temperature gradients directly from the C-OTDR intensity traces. The dots’ reflectivities and thus the induced attenuation can be tuned via the inscription process parameters. Our approach is a simple, robust and cost-effective way to gain these sensing improvements without the need for more sophisticated interrogator technology or more complex fiber structuring, e.g., based on ultra-weak FBG arrays. Our claims are substantiated by experimental evidence.
Along temperature, humidity is one of the principal environmental factors that plays an important role in various application areas. Presented work investigates possibility of distributed fiberoptic humidity monitoring based on humidity-induced strain measurement in polyimide (PI)-coated optical fibers. Characterization of relative humidity (RH) and temperature response of four different commercial PI- and one acrylate-coated fiber was performed using optical backscattering reflectometry (OBR). The study addresses issues of temperature-humidity cross sensitivity, fiber response stability, repeatability, and the influence of annealing. Acrylate-coated fiber exhibited rather unfavorable nonlinear RH response with strong temperature dependence, which makes it unsuitable for humidity sensing applications. On the other hand, humidity response of PI-coated fibers showed good linearity with fiber sensitivity slightly decreasing at rising temperatures. In the tested range, temperature sensitivity of the fibers remained humidity independent. Thermal annealing was shown to considerably improve and stabilize fiber RH response. Based on performed analysis, a 20 m sensor using the optimal PI-coated fibers was proposed and constructed. The sensor uses dual sensing fiber configuration for mutual decoupling and simultaneous measurement of temperature and RH variations. Using OBR, distributed dual temperature-RH monitoring with cm spatial resolution was demonstrated for the first time.
Darstellung des Verbundvorhabens "Monalisa" und der im Rahmen des Projekts erzielten F&E-Fortschritte auf dem 2. Statusseminar "Zukunftsfähige Stromnetze" des PTJ zur gleichnamigen Forschungsinitative der Bundesregierung. Präsentiert werden Fortschungsergebnisse zum Thema Zustandsüberwachung von verschiedenen elektrischen Betriebsmitteln (Kabel, Garnituren, Schaltanlagen, Schalter) mittels faseroptischer Sensorik. Das Monitoring bezieht sich dabei auf Temperatur, Vibrationen, eindringende Feuchte, Dehnung, und die Detektion von Teilentladungen
Selbstdarstellung des Verbundvorhabens "Monalisa" auf der Konferenz "VDE Hochspannungstechnik" 2018 der entsprechenden Forschungsinitiative der Bundesregierung Kurzzusammenfassung der Teilprojekte und F&E-Ziele aller beteiligten Partnerinstitutionen (BAM,TU Berlin, HTW Berlin, BeuthHS Berlin, IPH GmbH) zum Bereich Monitoring von elektrischen Betriebsmitteln mit Hilfe von faseroptischer Sensorik.
Verteilte faseroptische Sensorik eignet sich sehr gut für eine Zustands- und Gefährdungsüberwachung von ausgedehnten Hochspannungskabelinstallationen. Basierend auf der Messung von verschiedenen faseroptischen Rückstreueffekten in der Sensorfaser lassen sich ortsaufgelöste Profile von Messgrößen wie Temperatur, Dehnung oder Vibrationen erzielen.
Hier demonstrieren wir die Leistungsfähigkeit verschiedener faseroptischer Sensorikansätze bezüglich dieser Größen anhand von Experimenten u.a. an einem Mittelspannungskabel. Des Weiteren zeigen wir, wie die Verwendung von verschiedenen Sensorkabeltypen mit unterschiedlicher Applikation auf der Kabeloberfläche die Messergebnisse bei einem Biegeversuch beeinflussen und schlussfolgern damit auf die für die Einbettung in Kabeln geeigneten Sensoren.
Distributed Fibre Optic Sensing for Monitoring and Testing of Industrial and Civil Infrastructures
(2018)
Fibre optic sensors enable the gathering of sensory information in environments where conventional sensors fail or simply can not be utilised. Their small size enables their use in confined spaces as well as their embedding or integration in components, structures or composite materials while offering, depending on the approach, high sensitivity, very high spatial resolution and, especially, the possibility to detect or measure physical quantities in a distributed way, meaning spatially continuous sensing over very long distances.
Those distributed fibre optic sensors (DFOS) provide access to sensing information from different locations along the sensing fibre without the need for technologically challenging multiplexing of many point sensors and the subsequent sensor data fusion. In this way, DFOS are excellently suited as smart sensors for monitoring or testing purposes as the spatially distributed sensing data make available spatially resolved measurand profiles without a gap. Furthermore, the possible embedding or integration of DFOS could facilitate the development of smart structures or smart components. In particular distributed vibration sensing (DVS) and distributed temperature sensing (DTS) are also ideally suited for condition monitoring of machinery, industrial installations or extensive infrastructure, also, on-line real-time assembly or component testing in production lines, e.g. for quality control, is possible.
In this talk, we will shortly outline the underlying principles of some fibre optic sensing approaches, explain their fundamental differences in mode of operation and performance, and discuss their applicability and limitations. Moreover, we will report on a subset of current and previous applied research projects at BAM, investigating different areas of use for distributed fibre optic sensors in particular.