Best energy selection for different applications with digital detector arrays from 20 to 600 keV
(2012)
Concepts for digital image evaluation are presented for Computed Radiography (CR) and Digital Detector Arrays (DDAs) used for weld inspection. The precise DDA calibration yields an extra ordinary increase of contrast sensitivity up to 10 times in relation to film radiography. Restrictions in spatial resolution caused by pixel size of the DDA are compensated by increased contrast sensitivity. First CR standards were published in 2005 to support the application of phosphor imaging plates in lieu of X-ray film, but they need already a revision based on experiences reported by many users. One of the key concepts is the usage of signal-to-noise (SNR) measurements as equivalent to the optical density of film and film system class. The contrast sensitivity, measured by IQI visibility, depends on three essential parameters: The basic spatial resolution (SRb) of the radiographic image, the achieved signal-to-noise ratio (SNR) and the specific contrast (µeff - effective attenuation coefficient). Knowing these 3 parameters for the given exposure condition, inspected material and monitor viewing condition permits the calculation of the just visible IQI element. Furthermore, this enables the optimization of exposure conditions. The new ISO/FDIS 17636-2 describes the practice for digital radiography with CR and DDAs. It considers the first time compensation principles, derived from the three essential parameters. The consequences are described.
In den letzten Jahren wird zunehmend über neue Prüftechniken berichtet, die den bisher verwendeten ZfP-Film durch neue digitale Detektoren ersetzen. Dabei werden verschiedene Wege beschritten, um die erforderliche Bildqualität nachzuweisen. Die Motivation zum Filmersatz besteht in einer Kostenreduktion aufgrund kürzerer Belichtungszeiten, dem Wegfall von Verbrauchsmaterialien (der Verzicht auf Entwicklerchemie hat auch ökologische Vorteile), der Verringerung von Archivierungskosten und -raum sowie der Integration in eine rechnergestützte Dokumentation. Neue Kalibrierungs- und Messvorschriften für digitale Detektor-Arrays (DDAs, auch Matrix- oder Flachdetektoren genannt) wurden entwickelt, um das maximal erreichbare Signal/Rausch-Verhältnis (SNR) von DDAs zu bestimmen. Die entwickelten Algorithmen erlauben eine neue Hochkontrastempfindlichkeitstechnik, die eine Kontrastempfindlichkeit von bis zu 1/1000 der durchstrahlten Wanddicke ergibt. Standard-Radiographie mit den besten ZfP-Filmen (Filmklasse C1 nach EN 584-1) ist auf eine Kontrastempfindlichkeit von max. 1/100 der Wanddicke begrenzt. Die erzielbaren Bildqualitäten von ZfPFilm und DDAs werden anhand einer Testschweißnaht verglichen.