Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (57)
- Vortrag (51)
- Posterpräsentation (24)
- Beitrag zu einem Sammelband (23)
- Beitrag zu einem Tagungsband (23)
- Sonstiges (7)
- Buchkapitel (2)
- Forschungsbericht (2)
- Monografie (1)
Schlagworte
- Sol-gel (7)
- Electronic nose (5)
- Hydrogen (4)
- Hydrogen detection (4)
- Hydrogen sensor (4)
- Hydrogen sensors (4)
- Sensors (4)
- Hydrogen safety (3)
- Ion mobility spectrometer (3)
- Mould detection (3)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (51)
Ripeness and senescence of climacteric fruits are strongly related to the emission of ethylene gas. The ethylene emission of apples can be detected by a new developed ripeness indicator. This indicator is based on the reduction effect of ethylene causing colour changes in selected metal ions. The used molybdenum (Mo) chromophores change under the impact of ethylene in a colour spectrum from white/light yellow to blue because of a partial reduction of Mo(VI) to Mo(V). The sensitivity of molybdenum colour change reactions can be varied by composition and pH values (pH 1.4–pH 1.5) of used ammonium molybdate solution and thus adopted to different fruits and storage conditions. The indicator can be combined with a colour recognition sensor for quantitative measurements of colour change in the frame of the L*a*b* model. The b*-coordinate, reflecting changes from yellow to blue, and the luminance L* continuously vary with increasing ethylene emission. Results obtained with the indicator system were compared with direct determination of ethylene concentrations by gas chromatography (GC-FID). Furthermore, a descriptive sensory test was used to estimate the degree of ripeness. The indicator can be applied for ripeness gauge on single fruit or in paperboard crates.
Application of electronic nose and ion mobility spectrometer to quality control of spice mixtures
(2009)
An online monitoring of environmental and inherent product parameters is required during transportation and storage of fruit and vegetables to avoid quality degradation and spoilage. The control of transpiration losses is suggested as an indicator for fruit freshness by humidity measurements. For that purpose, an electronic sensor is surrounded by a wet porous fiber material which is in contact with the outer atmosphere. Transpiration reduces the water content of the porous material and thus also the internal water activity. The sensor system, known as 'artificial fruit,' measures the relative humidity and temperature inside the wet material. Humidity and temperature data are collected and transmitted on demand by a miniaturized radio communication unit. The decrease in the measured relative humidity has been calibrated against the mass loss of tomatoes under different external influencing parameters such as temperature, humidity, and air flow. Current battery life allows the sensor system, embedded in a fruit crate, to transmit data on transpiration losses via radio transmission for up to two weeks.
The preparation of sol-gel derived silica-based nanomaterials containing electrical conductive carbon fillers in an extensive composition range is described and their electrical properties are presented. Nanomaterials of carbon filler concentrations up to 60% (v/v) were obtained by dip coating or screen-printing from precursors of hydrolysed alkoxysilanes. Nanostructured morphology could be identified to consist of homogeneously dispersed carbon black particles or carbon fibres of 30 to 500 nm in size in a modified silica matrix. The electrical resistivity of the films changes drastically from 1010 to 10?1 O?cm, according to the amount of dispersed conductive particles. A threshold between 5 and 50% (v/v), at which the resistance abruptly decreases, was determined. A geometrical model related to percolation theory explains this non-linear dependence on the filler composition in the materials. Moreover the temperature dependence of resistance and the current-voltage characteristics of the nanomaterials can also be illustrated using this geometric model.
Different electronic sensor systems coupled with multivariate data analysis were applied to characterize and classify seven saffron samples and to verify their declared geographical origin. The proposed electronic sensing consists of a low-cost electronic nose (E-nose) based on metal oxide semiconductor sensors and a voltammetric electronic tongue (VE-tongue) based on voltammetric sensors. The ability of multivariable analysis methods such as Principal Component Analysis (PCA), Hierarchical Cluster Analysis (HCA) and Support Vector Machines (SVMs) to classify the saffron samples according to their geographical origin have been investigated. Both PCA and HCA have shown an overlapping of E-nose responses. Moreover, the SVM analysis of the E-nose database reached a 66.07% success rate in the recognition of the saffron sample odour. On the other hand, good discrimination has been reached using PCA and HCA in the VE-tongue characterization case, besides a 100% accuracy in the saffron flavour recognition was attained. To validate the proposed electronic sensing systems, analytical chemical methods such as SPME-GC-MS and UV-Vis spectrophotometry were used. These analytical methods could be helpful tools to identify the composition of volatile compounds of the analysed saffron samples. Moreover, UV-Vis spectrophotometry was also used to determine the non-volatile profile of the samples from different geographic origins. It is demonstrated that the electronic sensing systems' findings are in a satisfactory correlation with the analytical methods. In the light of these results, we might say that the electronic systems offer a fast, simple and efficient tool to recognize the declared geographical origin of the saffron samples.
A comprehensive analysis of composition and structure is essential for the development of new materials with tailored properties. We will demonstrate the application of SEM, XPS and XRD for the development of thin films containing nano-scaled electrical conductive particles for application in hybrid resistors.
The films were prepared using the sol-gel process and precursor solutions were synthesized from an acid hydrolysis of a mixture of TEOS, water and ethanol. Alcoholic solutions of ruthenium chloride were then allocated to obtain up to 30 vol% filler in the films. The films were precipitated by dip-coating on silicon, silica or glass sheets and heat treated at up to 600°C in air or nitrogen atmospheres.
A nano-structured morphology could be identified consisting of homogeneously dispersed crystalline RuO2 particles of 10 to 180 nm in size, in an amorphous SiO2 matrix. Film morphology can be varied using the synthesis process. The resistivity of the films was measured by an I-V measurement system. It changes drastically from 109·cm to 10-2·cm according to the amount of dispersed conductive particles.
The results show that composition-structure-property relations can be described by use of sophisticated analytical methods.
It has been shown that tetraethoxysilane-derived precursors are suitable solutions for impregnating pine sapwood to improve its dimensional stability. Tailored sol–gel syntheses result in precursors with nano-scaled silica species which are able to penetrate into the cell walls of wood. The physical fixation of those species inside the cell walls was verified by ESEM/EDX investigations. There is evidence that the silica species are chemically bonded to wood components. Nonreacted alkoxy groups can exist in the wood composites after impregnation. The amount of these organic residues depends on the composition of the precursors, especially their condensation degree and reactivity. Treatments for finishing the composites after the impregnation step to get clean products and stable properties are discussed in this context. An explanation of the complex relationship between solids content in the impregnation solutions and percentage weight gain and bulking of the composites is given. It can be demonstrated that high WPG values (>20 %) are pre-conditions for an effective protection of the resulting composites but they only guarantee efficient improvements if connected with the incorporation of the inorganic component inside the cell walls. Therefore, the sol–gel syntheses have to be carried out in such a manner that very small (<2 nm) as well as reactive species are sufficiently available. This demands syntheses using sub-stoichiometric water contents (H2O/TEOS <4, better <2).