Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (252) (entfernen)
Sprache
- Deutsch (221)
- Englisch (29)
- Mehrsprachig (2)
Schlagworte
- Zulassungen (23)
- Richtlinien (21)
- Anerkennungen (20)
- Festlegungen (17)
- Ausnahmegenehmigungen (7)
- Gefahrgutregeln (5)
- Applications (4)
- Laser processing (4)
- Zertifikate (4)
- Alkali-activated materials (2)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (20)
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (20)
- 4 Material und Umwelt (18)
- 4.3 Schadstofftransfer und Umwelttechnologien (18)
- 6 Materialchemie (7)
- 2 Prozess- und Anlagensicherheit (5)
- 2.2 Prozesssimulation (5)
- 6.2 Material- und Oberflächentechnologien (5)
- Z Zentrale Dienstleistungen (4)
- Z.1 Organisation, Controlling (4)
Advanced Pulse Laser Machining Technology is a rapidly growing field to tailor special industrial and scientific applications. This is significantly driven by the availability of high-repetition rate laser sources and novel beam delivery concepts.
This Special Issue focuses on developments in areas of surface and volume laser material processing, including spatial and temporal beam shaping, Bessel-beam dicing, direct laser interference patterning (DLIP), laser-induced forward transfer (LIFT), pulse burst machining, waveguide writing, and two-photon polymerization. Additionally, limitations of modern laser processing caused by failure of laser optics or unwanted secondary hazards like X-ray emission are addressed.
Here, we would like to attract contributors from industry and academics. This Special Issue shall bundle original research and review articles of the latest achievements.
Current trends in materials and life sciences are flanked by the need to push detection limits to single molecules or single cells, enable the characterization of increasingly complex matrices or sophisticated nanostructures, speed up the time of analysis, reduce instrument complexity and costs, and improve the reliability of data. This requires suitable analytical tools such as spectroscopic, separation and imaging techniques, mass spectrometry, and hyphenated techniques as well as sensors and their adaptation to application-specific challenges in the environmental, food, consumer product, health sector, nanotechnology, and bioanalysis. Increasing concerns about health threatening known or emerging pollutants in drinking water, consumer products, and food and about the safety of nanomaterials led to a new awareness of the importance of analytical sciences. Another important driver in this direction is the increasing demand by legislation, particularly in view of the 17 sustainable development goals by the United Nations addressing clean energy, industry, and innovation, sustainable cities, clean water, and responsible consumption and production. In this respect, also the development of analytical methods that enable the characterization of material flows in production processes and support recycling concepts of precious raw materials becomes more and more relevant. In the future, this will provide the basis for greener production in the chemical industry utilizing recycled or sustainable starting materials.
This makes analytical chemistry an essential player in terms of the circular economy helping to increase the sustainability of production processes. In the life sciences sector, products based on proteins, such as therapeutic and diagnostic antibodies, increase in importance. These increasingly biotechnologically produced functional biomolecules pose a high level of complexity of matrix and structural features that can be met only by highly advanced methods for separation, characterization, and detection. In addition, metrological traceability and target definition are still significant challenges for the future, particularly in the life sciences.
However, innovative reference materials as required for the health and food sector and the characterization of advanced materials can only be developed when suitable analytical protocols are available. The so-called reproducibility crisis in sciences underlines the importance of improved measures of quality control for all kinds of measurements and material characterization. This calls for thorough method validation concepts, suitable reference materials, and regular interlaboratory comparisons of measurements as well as better training of scientists in analytical sciences.
The important contribution of analytical sciences to these developments is highlighted by a broad collection of research papers, trend articles, and critical reviews from these different application fields. Special emphasis is dedicated to often-overlooked quality assurance and reference materials.
Topical issue: Ellipsometry
(2022)
Ellipsometry is a matured experimental method, whose roots reach back into the early phase of modern optics itself. It is often attributed to be invented by Paul Drude in the last decade of the 19th century, but similar techniques had already been applied for years before Drude started his work. With this Special Issue about ellipsometry and related techniques, we hope to bring more attention to this method and advance and propagate it to be used by a broader community.
What is meant by ‘Micro Non-Destructive Testing and Evaluation’? This was the central subject of debate in this Special Issue.
At present, sub-millimeter-size components or even assemblies are pervading the industrial and scientific world. Classic examples are electronic devices and watches (as well as parts thereof), but recent examples encompass additively manufactured lattice structures, stents, or other microparts. Moreover, most assemblies contain micro-components. Testing such components or their miniaturized parts would fit well within the topic of micro non-destructive testing and evaluation.
In all cases, performance and integrity testing, quality control, and dimensional tolerances need to be measured at the sub-millimeter level (ideally with a spatial resolution of about a micron); most of the time, such features and components are embedded in much larger assemblies, which also need to be taken into account. The solution to this dilemma (i.e. measuring large parts with high resolution) depends on the part and on the problem under consideration.
Another possible definition of micro non-destructive testing and evaluation can relate to the characterization of micro-features (e.g., the microstructure) in much larger specimens, such as damage in concrete cores or porosity in additively manufactured components. A further aspect is the use of microscopic probes to evaluate macroscopic properties. This is the case, for instance but not at all exclusively, in the use of diffraction techniques to determine macroscopic stress.
The splits between testing and characterization at the micro-level (or of micro parts) from one side and handling of macroscopic assemblies on the other represent a great challenge for many fields of materials characterization. On top of that, including the use of microscopic methods to test integrity would add a further level of complexity.
Imaging, mechanical testing, non-destructive testing, measurement of properties, structural health monitoring, and dimensional metrology all need to be re-defined if we want to cope with the multi-faceted topic of micro non-destructive testing and evaluation.
The challenge has already been accepted by the scientific and engineering communities for a while but is still far from being universally tackled. This Special Issue yields an interesting answer to the questions posed above. It presents the progress made and the different aspects of the challenge as well as at indicates the paths for the future of NDT&E.
The study of laser-fabricated periodic nanostructures is one of the leading topics of today’s photonics research. Such structures on the surface of metals, semiconductors, dielectrics, or polymers can generate new material properties with special functionalities. Depending on the specific material parameters and the morphology of the structures, new devices such as microlasers, optical nanoswitches, optical storage devices, sensors or antifraud features can be realized. Furthermore, laser-generated surface textures can be used to improve the tribological properties of surfaces in contact and in relative motion—to reduce friction losses or wear, to modify the wettability or the cell and biofilm growth properties of surfaces through bioinspired laser engineering, for emerging medical applications, or as decoration elements for the refinement of precious goods.
This Special Issue “Laser-Generated Periodic Nanostructures” focuses on the latest experimental and theoretical developments and practical applications of laser-generated periodic structures that can be generated in a “self-organized” way (laser-induced periodic surface structures, LIPSS, ripples) or via laser interference-based direct ablation (often referred to as direct laser interference patterning, DLIP). We aimed to attract both academic and industrial researchers in order to collate the current knowledge of nanomaterials and to present new ideas for future applications and new technologies. By 8 August 2021, 22 scientific articles have been published in the Special Issue.
Façade fires are of growing concern worldwide. Severe facade fires in different parts of the world as well as activities in many countries regarding the testing of facades show the urgency of the fire safety challenges in façade fires. The need for knowledge and a wide Archive of work in this area has become evident after recent incidents which involved extensive facade fires. These include the tragic fires in Dubai and Grenfell Tower in 2017 in the United Kingdom. In many cases, the widespread live news coverage of the events and size of These fires has emphasized the need for progress in the understanding of the processes involved in these fires and put pressure upon the fire safety engineering community to find effective solutions.
Geopolymers and alkali-activated materials have emerged as a complement, and partly as an alternative, to traditional materials in various applications, such as traditional ceramics, energy saving, waste management, building construction, and filtration. These new materials can play an important role in mitigating climate change and promoting a circular economy, which is one of the reasons why they are being actively researched in many laboratories around the world.
Open Ceramics, the official, peer-reviewed, Open Access journal of the European Ceramic Society, is dedicated to foster this research and is compiling a Special Issue with the title “Alkali-activated and geopolymer materials in ceramics and various applications”. The aim of this Special Issue is to promote new applications, the use of previously underused raw materials, and in particular a better understanding of the chemical and mechanical behavior of these materials.
The scope of the Special Issue includes, but is not limited to, research on the following topics:
- valorization of previously underused raw materials
- a better understanding of established raw materials
- detailed spectroscopic characterization of alkali-activated materials and geopolymers to elucidate their phase assemblage
- the mechanism of formation of the phase(s) that comprise these binders
- control of their mechanical properties
- the effect of fillers/aggregates on their mechanical properties
- their durability under various conditions and the underlying deterioration mechanisms
- special applications and recycling-related considerations.
Throughout their life cycle—from production, via usage, through to disposal—materials and products interact with the environment (water, soil, air). At the same time, they are exposed to environmental influences and, through their emissions, have an impact on the environment, people, and health. Accelerated experimental testing processes can be used to predict the long-term environmental consequences of innovative products before these actually enter the environment.
The aim of this Special Issue of the journal Materials is to publish original research and review articles as well as short communications tackling the problem of reliable environmental measurement methods and reporting exemplary case studies.
Sulfate is abundant in the environment and, as a result, sulfate-containing minerals constitute a large and important focus of research. These minerals play an important role in many geochemical and industrial processes, including the sulfur cycle, the construction industry (e.g., plaster of Paris), fault tectonics, acid mine drainage, and even rare biominerals. Important to note are the abundant amounts of sulfate (minerals) located on the surface of Mars, and in meteorites, extending the relevance of this mineral group beyond the realm of our planet. In geological systems, sulfate minerals such as barite are also important for indicating certain sedimentation environments. In this regard, sulfate deposits can be used to evaluate the redox state of ancient oceans during early Earth time periods.
Laser material processing is an emerging technology that generates surface functionalities on the basis of optical, mechanical, or chemical properties. In the form of laser surface texturing (LST), it has attracted a remarkable amount of research to tailor surface properties towards various tribological applications. The main advantages of this single-step, laser-based technology are the contactless machining, featuring a high flexibility, efficiency, and speed, along with the excellent quality of the processed products. LST can be applied precisely localized to sub-micrometric areas, but, via laser beam scanning, it is also feasible for structuring large surface areas at the square meter size.
This Special Issue focuses on the latest developments concerning the tribological performance of laser-generated periodic surface nano- and microstructures and their applications. This includes the laser-based processing of different surface patterns, such as “self-organized” laser-induced periodic surface structures (LIPSS, ripples), grooves, micro-spikes, hierarchical hybrid nano-/micro-structures, microfeatures generated by direct laser interference patterning (DLIP), or even dimples or other topographic geometries shaped by direct laser modification or ablation. The applications of these periodically nano- and micro-patterned surfaces may improve the lubricated or non-lubricated tribological performance of surfaces in conformal and even non-conformal contact through a reduction of wear, a variation of the coefficient of friction, altered load carrying capacity, etc., resulting in energy saving, improved reliability, increased lifetimes as well as durability, leading in turn to extended maintenance intervals/reduced down-time. This can be beneficial in terms of bearings, gears, engines, seals, cutting tools, or other tribological components. Fundamental aspects addressed may involve the investigation of the relevant physical and chemical effects accompanying the laser-generated nano- and microscale topographies, such as alterations of the material structures, the hardness, superficial oxidation, the role of additives contained in lubricants, surface wettability, micro-hydrodynamic effects, etc.
For this Special Issue we aim to attract both academic and industrial researchers and would like to provide a bridge between research in the fields of tribology and laser material processing in order to foster the current knowledge and present new ideas for future applications and new technologies.
Dear Colleagues,
Raman spectroscopy provides vibrational fingerprints of chemical compounds, enabling their identification via a comparison with reference spectra. This analytical tool has high potential not only in the identification of minerals from natural sources but also for studying the complex microstructure and mineral distribution of both ancient and modern man-made materials, ranging from, e.g., historical ceramics and mortars to modern solar cell materials. In addition to the chemical identity of minerals, Raman spectra are affected by crystal orientations, substoichiometric to stoichiometric compositional changes (e.g., in solid solution series), traces of foreign ions, stress, strain, and crystallinity, enabling a comprehensive physicochemical characterisation of minerals. This Special Issue includes method developments and applications in the field of modern Raman spectroscopy of minerals in a broad sense, from natural mineral deposits to inorganic phases in materials; covers both spectroscopic and imaging studies; and provides a platform for discussing the possibilities and limits of the technique in the context of the existing analytical arsenal.
Thomas Schmid
Petra Dariz
This Special Issue of Fire and Materials brings together a Collection of papers that were presented at the 2016 Interflam conference in the Fire & Facades session along with recent submissions to the Fire and Materials Journal that are very relevant to the Fire and Facades subject. Having attended the Interflam conference, all Fire and Materials Journal editors who attended realised the importance of this topic. We felt it important that this session content would both be reviewed and made available to a wider audience and that it was timely that we featured this increasing important topic in our journal. Accordingly, authors of selected papers were invited to update and extend their papers for journal submission, and other appropriate peer review papers subsequently submitted to the journal were included in the collection.
Components in the Aerospace, Power and Automotive engineering sectors are frequently subjected to cyclic stresses induced by thermal fluctuations and mechanical loads. For the design of such components, reliable material property data are required which need to be acquired using well accepted and reproducible test procedures for thermo-mechanical fatigue (TMF) loading. There is limited availability of proven TMF data indicating there is need for further research and testing. The TMF behaviour of materials is often desired to be simulated in models which describe the cyclic stress-strain behaviour, the fatigue life and the cyclic crack growth behaviour. There is a continuous need for the development and amendment of such models. Models can be validated by using materials in industrial applications which are subjected to TMF loading.
The 3rd Workshop on Thermo-Mechanical Fatigue was held on 27–29 April 2016 at BAM, Berlin, Germany. The workshop was attended by 90 attendees coming from 17 countries in the world. 38 presentations including five poster presentations were held.
The following topics were covered by the workshop:
– TMF of materials coated with Thermal Barrier Coatings.
– Thermal Gradient Mechanical Fatigue.
– TMF crack growth.
– TMF + High Cycle Fatigue.
– TMF Modelling and Lifetime Prediction.
– TMF Properties of steels, cast iron, Al-, Mg- and Ni-alloys
– Advanced TMF Testing Techniques.
– Industrial Applications.
A panel discussion was held regarding the present state of TMF testing standards (ISO and ASTM) and their potential for improvement. The discussion and contributions were summarized and forwarded to the standard committees. The 3rd TMF-Workshop ensured the continuation of international exchange of knowledge providing a forum to present and discuss all recent developments in the field of thermo-mechanical fatigue.
The current special issue publishes eleven selected papers of the 3rd TMF-Workshop 2016. The papers were peer reviewed by a number of experts in the Thermo-Mechanical Fatigue sector. I hope you will enjoy reading papers of this special issue.
Topical issue: Geopolymers
(2017)
Geopolymers have gained very much momentum in recent years, in science and in industry. These highly promising and versatile materials have been researched with a view to applications as diverse as fire-resistant/refractory materials, as precursors for ceramics, in waste stabilization/immobilization, and as novel building materials. The great interest in these materials is reflected, inter alia, by the installment of a session on geopolymers at the 92nd Annual Meeting of the Deutsche Keramische Gesellschaft (DKG; German Ceramic Society) in March 2017. Therefore this Special Issue is dedicated to disseminating some of the recent findings on these materials. In addition, it contains reviews by highly experienced researchers in the field, highlighting very different aspects such as fiber reinforcement and synchrotron-based characterization methods.
Partly due to the interest from very different fields, the term „geopolymer“ is used with two different meanings. Sometimes it is used in the sense to denote the ceramic-like materials produced by activation of metakaolin with alkali silicate solutions, and closely related materials. On the other hand, sometimes it is used in a much broader sense to refer to any material that is produced by alkali-activation of many different aluminosilicate precursors, such as fly ash and granulated blast furnace slag waste materials, often serving as a cementitious binder. The present issue focusses on applications and materials that may be classified as ceramic, but also contains a review on the use of alkali-activated materials as construction materials to make the reader familiar with this approach too. Additionally, some of the materials described in this issue may be regarded as being „on the borderline“ between ceramics and cements, which is something that can be said about many studies in the geopolymer field.
The editors are very grateful to each of the authors of the articles in the present issue, as all of them have contributed high quality research based on their extensive experience. In particular, the historial perpectives on the origins and developments of geopolymers and of alkali activated materials have been authoritatively documented in contributions, by Joseph Davidovits and Pavel Krivenko. Dr. Krivenko was the Ph.D. student of Viktor D. Glukhovsky who first introduced alkali activated cements in 1957. It is hoped that the readers of this issue will enjoy reading it as much as the editors enjoyed putting it together, and that the issue will stimulate more high quality studies of geopolymers, perhaps even from research groups that have not yet been active in this area.
Journal of ceramic science and technology - Topical issue "Low temperature co-fired ceramics - LTCC"
(2015)
Prof. Dr. Friedrich Kremer is celebrating his 65th birthday this year. Furthermore, also for this reason, he resigned from the position as an Editor-in-Chief of the journal Colloid and Polymer Science. In his more than 20 years of successful editorship, he has substantially contributed to develop Colloid and Polymer Science to become a leading international journal in the field of polymers and colloids including their manifold connections with other branches of science. He will remain in a close connection to the journal as the new Chief Advisory Editor. To appreciate both his 65th birthday and his prosperous engagement for this journal, Springer is pleased to launch the present special issue of Colloid and Polymer Science dedicated to Prof. Dr. Friedrich Kremer. Friends, editors, and colleagues, as well as coworkers and former students contribute to this special issue with their own selected original scientific work in order to honor Prof. Dr. Friedrich Kremer not only as a leading scientist but also as a person with an outstanding personality.
The 100th anniversary of the death of Adolf Martens will be commemorated on July 24th, 2014. He is eponymously remembered today through the term martensite, which was first used by Floris Osmond as a name for the metastable phase that results from rapid quenching of carbon steels. Born in 1850 near to Hagenow in the region Mecklenburg, Germany, Martens was one of the pioneers of materials engineering in 19th century Europe.
Martens began his career working for the Prussian Eastern Railway before joining the Royal Industrial Academy in Berlin in 1880. In 1884, he was appointed director of the Royal Mechanical Experimental Station, a small institution associated to the academy. Failure analysis was continuously practiced at this institution, which became later the nucleus of the German Federal Institute for Materials Research and Testing (BAM), for the 110 years since. The history of Martens will be dealt with in an in-depth article in this special issue.
Since the 19th century, failure analysis techniques have been refined, and new methods of chemical analysis and non-destructive testing have been developed; however, the basic approach to failure analysis has not changed much since Martens' days. The basic tenets of failure analysis remain things like on-site inspection, extensive visual 'non-destructive' inspection, developing an understanding of the background story, performing materials testing, and 'connecting the dots.' Martens introduced and developed experimental techniques like macro photography, fractography, metallography, hardness measurements, and mechanical testing. Modern failure analysts continue adding even more techniques to this list, leading to a more interdisciplinary approach which many would say is the only way to find the root causes of complex failure events.
The present special issue of EFA presents an overview of more than 100 years of failure analysis at BAM and its predecessors, closing the circle from the beginnings of modern failure analysis done by Martens himself in the 1890s to its present-day application.
This special issue starts with an excursion back to Martens' work and innovations and presents a newly translated original manuscript of Martens from 1890. Whereas some papers of Martens and his co-workers are well documented, only little can be found about failure analysis in the period from 1914 to the 1950s. Most documents of this period have not survived until today. Beginning in the 1960s more and more significant works are preserved, which were using the interdisciplinary approach of Martens. Since the beginning of the digital age in the 1980s almost all text documents are accessible, whereas digital images were stored since the 1990s. Since then the problem is no longer accessibility but copyright issues that prevent many interesting case studies from being published. Maybe the next generation of failure scientists can reveal some of them later on.
Nobody who knows Nico Omenetto will believe that he is going to celebrate his 75th birthday on November 12 this year. There has to be a special elixir which keeps him going strong, enthusiastic and positive. It is certainly his wife Mariella and his son Fiorenzo with family, but also his love for scientific research and teaching. All of us, the spectrochemical community, have benefited from the great enthusiasm which he has invested in finessing the jounal Spectrochimica Acta, Part B for 20 years, spending numerous hours of his free time in handling manuscripts as mediator between authors and referees. We are grateful for his continuous, dedicated commitment to a journal which we all admire. The great appreciation of his colleagues can be observed from the universal support for this Special Issue on behalf of his upcoming birthday. All who were asked immediately agreed to submit contributions.