Filtern
Dokumenttyp
- Beitrag zu einem Sammelband (20) (entfernen)
Schlagworte
- Fiber optic sensors (6)
- OTDR (6)
- Dike monitoring (5)
- Strain sensor (5)
- Structural health monitoring (5)
- Distributed sensor (4)
- Polymer optical fibers (POF) (4)
- Geotextile (3)
- Geotextiles (3)
- POF sensor (3)
Organisationseinheit der BAM
Humidity is one of principal environmental parameters that plays an important role in various application areas. Using measurement of strain induced in an optical fiber by a water swellable coating represents a promising approach for realization of distributed humidity sensing (DHS). In this work, humidity and temperature response of four different commercial PI-coated fibers and four tight-buffered (TB) fibers is investigated with the aim of evaluating their potential for development of DHS in context of water ingress sensor for high-voltage power cable splices. PI-coated fibers exhibited close-to-linear humidity and temperature response. While the temperature response is relatively coating-independent, magnitude of humidity response was broadly correlated to the relative fiber-to-coating thickness ratio. In contrast, both humidity and temperature response of TB fibers is strongly influenced by buffer type, with Leoni TB900L fiber with Hytrel buffer exhibiting largest humidity and temperature sensitivity. While the response of tight-buffered fibers is generally nonlinear, roughly three-times higher humidity response can be achieved with TB900L compared to the most sensitive PI-coated fiber. Using the TB fiber can be, therefore, advantageous for simpler water detection applications, such as one targeted in this study, when larger sensitivity is more important than the linear response of the sensor.
The potential impact of optical fiber sensors embedded into medical textiles for the continuous monitoring of the patient during Magnetic Resonance Imaging (MRI) is now proved. We report how two pure optical technologies can successfully sense textile elongation between, 0% and 3%, while maintaining the stretching properties of the textile substrates for a good comfort of the patient. Investigating influence of different patients' morphology as well as textile integration issues to let free all vitals organs for medical staff actions, the OFSETH harness allows a continuous measurement of respiration movements. For example, anaesthesia for MRI examination uses the same drugs as for any surgical procedure. Even if spontaneous respiration can be preserved most of the time, spontaneous respiration is constantly at risk of being impaired by anaesthetic drugs or by upper airway obstruction. Monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. Moreover artefacts due to physiological motions induce a blooming effect on the MRI result. The use of synchronisation devices allows reducing these effects. Positioned at certain strategic places according to the investigated organ, the presented sensors could constitute an efficient and adapted solution for respiratory synchronisation of the MRI acquisition.
POF sensors integrated in technical textiles for monitoring of earthwork structures and masonry
(2009)
Distributed polymer optical fiber sensors in geotextiles for monitoring of earthwork structures
(2009)
We report on the development of distributed fiber sensors and their integration into
geosynthetics as they are commonly used in the construction of dikes and dams for flood protection.
The sensing system uses Stimulated Brillouin Scattering (SBS) in silica optical fibers.
Using the Brillouin frequency analysis, the system is capable of detecting changes in both strain
and temperature along the optical fibers. The strain experienced by the optical fibers corresponds
to the deformation of the geosynthetics in case of a critical soil displacement. To satisfy
requirements of dike structures, the system will be optimized to detect soil displacement with a
spatial resolution of 5 m or less over a length in the range of 10 km. These rather modest requirements
leave space for optimization on resolution of the measurement values, measurement
time and cost efficiency.
To our knowledge, this is the first distributed fiber sensor using SBS that is especially designed
for the monitoring of soil displacement in dikes which is made possible by a novel method
for the integration of optical fibers into different types of geosynthetics.
We report on the development of a complete system for spatially resolved detection of critical soil displacement in river embankments. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain in silica optical fibers. Our development consists of the measurement unit, an adequate coating for the optical fibers and a technique to integrate the coated optical fibers into geotextiles as they are commonly used in dike construction. We present several laboratory and field tests that prove the capability of the system to detect areas of soil displacement as small as 2 meters. These are the first tests of truly distributed strain measurements on optical fibers embedded into geosynthetics.
Fiber optic sensors based on polymer optical fibers (POF) have the advantage of being very elastic and robust at the same time. Unlike silica fibers, standard PMMA POF fibers can be strained to more than 40% while fully maintaining their light guiding properties. We investigated POF as a distributed strain sensor by analysing the backscatter increase at the strained section using the optical time domain reflectometry (OTDR) technique. This sensing ability together with its high robustness and break-down strain makes POF well-suited for integration into technical textiles for structural health monitoring purposes. Within the European research project POLYTECT (Polyfunctional textiles against natural hazards) technical textiles with integrated POF sensors, among others sensors are being developed for online structural health monitoring of geotechnical structures. Mechanical deformation in slopes, dams, dikes, embankments and retrofitted masonry structures is to be detected before critical damage occurs. In this paper we present the POF strain sensor properties, reactions to disturbing influences as temperature and bends as well as the results of the different model tests we conducted within POLYTECT. We further show the potential of perfluorinated graded-index POF for distributed strain sensing with increased spatial resolution and measurement lengths.
Fiber optic sensors based on polymer optical fibers (POF) take advantage of the high elasticity and high break-down strain of POF. Because of their outstanding elastic properties, POF are well suited for integration into technical textiles like geotextiles and medical textiles. Smart textiles with incorporated POF sensors, able to sense various mechanical and physical quantities, can be realized. The integration of POF as a sensor into geotextiles for monitoring of displacement of soil is very attractive since POF can be used for distributed strain measurement of strain values of more than 40 %. An online monitoring of critical mechanical deformations of geotechnical structures like dikes, dams, slopes, embankments as well as of masonry structures can be ensured. Medical textiles that incorporate POF sensors can control vital physiological parameters like respiratory movement and can be used for wearable health monitoring of patients requiring a continuous medical assistance and treatment. The biocompatibility of POF is an important criterion for selecting POF as a medical sensor. The paper shows selected examples of using POF sensors for the mentioned monitoring purposes.
Sensing characteristics of polymer optical fibers (POF) are studied using the optical
time-domain reflectometry technique. For the first time to our knowledge, investigations are
carried out with respect to integration of POF in technical textiles for distributed measurement
of mechanical deformation. The research on this new sensor type focuses on its application in
monitoring of geotechnical structures such as railway embankments, dikes, slopes and dams.
We report on a distributed sensor system using POF integrated in technical textiles as sensing
elements for measurement of displacement of soil. This sensor system is very robust it
withstands the integration under rough condition at a construction site and can detect strain
of more than 40 % over distances of more than 100 meters.
Fiber Bragg grating sensor arrays can be used to monitor the mechanical behavior of rotor blades of wind turbines. In order to investigate how stable and reliably work such sensors, different fiber Bragg gratings were embedded into textile-reinforced composite. Long-term temperature and tensile (fatigue) tests have been carried out with composite structure specimens. This paper reports on selected results of the tests and discusses important reliability aspects with regard to the fiber design and the fiber material.