Filtern
Erscheinungsjahr
- 2019 (21) (entfernen)
Dokumenttyp
- Buchkapitel (21) (entfernen)
Sprache
- Englisch (21) (entfernen)
Referierte Publikation
- nein (21)
Schlagworte
- Concrete (3)
- High temperature (3)
- Stress-strain-relation (3)
- Superplasticizer (3)
- Silica beads (2)
- AFM (1)
- Accelerator (1)
- Archaeometry (1)
- Assessing (1)
- Braking-in-a-turn maneuvers (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (9)
- 3 Gefahrgutumschließungen; Energiespeicher (6)
- 4 Material und Umwelt (5)
- 3.2 Gefahrguttanks und Unfallmechanik (4)
- 7.3 Brandingenieurwesen (3)
- 7.4 Baustofftechnologie (3)
- 3.4 Sicherheit von Lagerbehältern (2)
- 4.3 Schadstofftransfer und Umwelttechnologien (2)
- 8 Zerstörungsfreie Prüfung (2)
- 8.5 Röntgenbildgebung (2)
Turning maneuvers performed by railway cars, imply the development of steering forces at the wheel-track interface, whose magnitude depends on a set of properties and operating conditions related to the vehicle and to the infrastructure, including track´s turning radius and vehicle´s yaw resistance.
Yaw resistance integrates two components. On the one hand, there is the yaw stiffness, as a function of the different vehicle suspension components. On the other hand, there is the dry friction at the centre plate. Such yaw resistance of the car´s bogies, has a two-contradictory effect on railway performance, as a flexible bogie reduces the level of the steering forces, but at the same time, it increases the probability of having hunting instability. A variable yaw resistance, with high values at straight track segments and low values at curved tracks, seems to be an interesting design. In this paper, a variable friction Center plate is proposed, aiming at maximizing the yaw resistance on straight track segments, and minimizing such resistance at curved tracks. The conceptual design of this device is described, together with its ability to reduce the yaw torque. Benefits of this device, regarding the transport energy consumption and the magnitude of the steering forces, are estimated on the order of 1 to 10, when comparing the proposed design with the standard center plate design.
Advanced Modelling
(2019)
This publication summarizes the work carried out during an IAEA coordinated research project (CRP) on safe and reliabe management of spent nuclear fuel. This work contributes to the overall goal of demonstrating the performance of spent nuclear fuel and related storage systems components over long durations, and facilitates the transfer of this knowledge to Member States. The technical areas addressed by the CRP participants were related to potential degradation mechanisms in metal casks and concrete overpacks, such as stress corrosion cracking; long term integrity and performance of the fuel cladding; thermo-mechanical behaviour of the metal seals; and long term gamma and neutron shielding capability. The participants also considered past and ongoing demonstration programmes. For each technical topic addressed the main conclusions have been drawn, including information on the development of specific monitoring and inspection techniques as well as future opportunities for closing relevant data gaps. A major achievement is also the establishment of a worldwide network of experts working on current research projects to demonstrate the long term performance of spent fuel in dry storage systems.
Engineering Modelling
(2019)
This chapter presents the most commonly used approach to analyse the
thermo-mechanical behaviour of concrete structures subjected to high temperatures as in the case of fire loading. Prescriptions of the Eurocode are detailed for the thermal as well as the mechanical analysis. Finally, recommendations from two national (Austrian and German) guidelines give some improvements for Underground infrastructure.
The magnitude of the steering forces at the wheel-track Interface depends on different properties and operational conditions linked to the vehicle and to the track, with the bogie´s yaw stiffness/resistance and the friction at the centre plate being recognized as the most influential vehicle factors. In this respect, the negative consequences of high values for yaw resistance have been recognized in terms of the railway accelerated deterioration and on the possibility for derailment. While some theoretical models have been proposed to simulate the effects of the centre plate friction on the railway damage, and experimental measurements have been reported of the turning resistance, no experimental data is available regarding the effect of the friction at the centre plate on the wheel-track forces. In this paper the conceptual design of a testing rig is presented for assessing such forces as a function of the center plate friction. The testing rig quantifies the effects of the friction forces developed at the centre plate, in terms of the loss of potential energy when a scaled-down vehicle travels downwards and tries to return upwards in a “U turn” maneuver. A simplified mathematical model is also proposed in this paper, whose Outputs suggest a significant effect of the dry friction on the magnitude of the steering forces.
Methods have been presented for detailed studies of railway vibration and for the fast prediction of train-induced ground vibration. The ground vibration is generated by static or dynamic loads. The main purpose of this contribution was to show the influence of inhomogeneous soils on the different vibration components.
Layered soils, namely a soft layer on a stiffer half-space, yield a quite specific transmission behavior. The low-frequency and sometimes also high-frequency cut-off of the transfer function of the soil is demonstrated in theory and by experiments at many sites of which the soil model is approximated from dispersion and transfer function measurements. The layer frequency divides the frequency range in a low-frequency range, where the stiff half-space rules the low amplitudes, and a high amplitude high-frequency range which is mainly determined by the softer top layer. A thick soft layer yields a very low layer frequency, so that the higher soft soil amplitudes have a wider range down to low frequencies. A thin layer yields a high layer frequency, so that the high frequencies above this layer frequency are dominant. The higher the contrast between the stiff half-space and the soft layer is, the stronger the increase between the half-space and layer amplitudes, the more characteristic are the spectra of the soil transfer function. The range of measured soils has been from vS1 down to 125 m/s, vS2 up to 1000 m/s and the layer frequencies are within 10 Hz < f0 < 75 Hz. Moreover, during this measuring campaign in Switzerland, all 11 sites showed clearly the layer-on-half-space behaviour. The transfer functions of inhomogeneous soils have been used to predict the ground vibration due to dynamic axle loads which is usually thought to be the most important component.
The passage of static loads, in the contrary, results in very small vibration amplitudes for low train speeds, which can only be found at near distances and at low frequencies. They attenuate very rapidly with distance and lose very rapidly the higher frequency content. The passage of static axle loads can be included in the prediction of railway vibration just for completeness.
Special attention should be given to the case if the train runs with the Rayleigh-wave speed of the soil (Rayleigh train). The Rayleigh-train effect is strongest for a homogeneous half-space: At the near-field of the track the amplitudes are raised strongly compared to normal trains, and in addition, little attenuation with distance is observed. In case of a layered soil, the low-frequency cut-off reduces the frequency range and the amplitudes of the homogeneous quasi-static ground vibrations. Therefore, the Rayleigh-train effects are clearly reduced by a layered soil and they disappear if the layer frequency (for example for a thin layer) is higher than the frequency band of the axle impulse. The Rayleigh-train effect could completely disappear in a randomly inhomogeneous soil, but this has not been analysed so far.
The axle impulses from static loads can have an additional, quite different effect. They can be scattered by a randomly inhomogeneous soil so that a part (the scattered part) of the axle impulse can reach further distances from the track. This can establish a certain mid-frequency component of the ground vibration which becomes dominant in the far-field, and this important component exists for all train speeds. Experimental results from BAM and international measurements show the importance of the corresponding frequency range.
The mitigation of train induced ground vibration by elastic and stiff track elements has been analysed threefold. The vehicle-track interaction yields the reduction at high frequencies above the vehicle-track resonance. This is the standard effect. The filtering of trackbed errors by the bending stiffness of the track yields a certain mid-frequency effect. An even stronger mid-frequency effect is predicted for the mitigation of the scattered axle impulses by the bending stiffness and elastic elements of the track.
Special applications like pumping, spraying or printing of concrete require the precise adjustment of very specific rheological properties at different time steps during the casting process. Superplasticizers such as polycarboxylate ethers (PCE) can be used to obtain the required flowability, which, possibly in combination with additional rheology modifying admixtures, generate the required specified consistency. However, after the application, the concrete should change the rheological properties immediately in order to avoid deformations at rest. Therefore, the use of accelerators can be effective. Accelerators influence the hydration of cementitious materials, and thus the rheological properties over the course of time and the setting.
In this paper, the influence of different accelerators on the rheology and early hydration of cement paste as well as the interaction of accelerator and PCE are presented. Methods like rheometry, needle penetration tests and practical Tests like spread flow were applied. The used accelerators showed accelerating behavior on the cement pastes without and in the presence of PCE. At the same time an influence on the rheology could be observed. This effect was less in the mixes with PCE, especially at the highest water/cement ratio (w/c).