Filtern
Erscheinungsjahr
- 2014 (483) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (483) (entfernen)
Schlagworte
- Nanoparticles (9)
- Corrosion (8)
- Welding (8)
- EDX (7)
- Mechanical properties (7)
- Aluminium (5)
- Mass spectrometry (5)
- Microstructure (5)
- Raman spectroscopy (5)
- CCQM (4)
In the majority of cases, the red color of cinnabar on objects of cultural heritage is well preserved, though turning black is often claimed and has been the subject of investigations. To evaluate conditions for the stability of the pigment and understand the reactions, in this paper the problem is approached from various viewpoints. First of all the natural form cinnabarite is compared with the artificially prepared pigment vermilion. This establishes a differentiation of types in terms of quality, depending on structural impurities. With regard to the pigment’s reactions influencing the discoloration, the most commonly mentioned environmental factors, such as radiation or halogens, are evaluated. In relation to various usages, the pigment’s structural stability is then viewed in connection with adjacent pigments, glues, and the substrate, which may lead to a brown or black coloration or even the release of mercury, whereas the color is preserved in most cases when used on lime or in ink and lacquer. Due to the materials’ properties, attention is drawn to the fact that discoloration to a brownish-black is not necessarily a sign of damage and harmful reaction products, but may indicate good preservation of the painted material, provided that the mercury can be bound in the substrate.
The paintings and manuscripts discovered in the sealed ‘library cave’ in Dunhuang, Western China, contain the earliest surviving examples of Tibetan artistic and scribal practice (9the10th centuries AD). Despite their importance, their material characteristics have not previously been studied. The present paper discusses the results of the analysis of paper and pigments in a selection of items across a variety of forms and functions: (i) Buddhist manuscripts, (ii) official letters, (iii) hung paintings, (iv) ritual items, (v) banners, and (vi) stencils and preliminary sketches. The material analysis of these items is presented in historical context, to address three research questions. First, whether there is a correspondence between the materials used in the creation of these objects and their geographical origin. Second, in terms of the choices made in the available materials and techniques, whether there is a detectable correlation between materials chosen and the intended function of the objects. Third, whether the characteristics of the objects analysed here be considered to be part of a broader Central Asian artistic and scribal culture. The authors conclude that a local culture of paper and pigment production can be detected in these results, though further research is needed especially on the geographical origin of raw materials for pigments. The results show that artists and scribes made technological choices in paper and pigments depending on the function of the objects they were creating. Finally, understanding of the broader Central Asian context of these results will depend on future analysis of material from other archaeological sites, and comparison with the results of this study.
The need to improve the sustainability and the need for innovation in the cement industry has brought to light the practice of using additives to the cement in order to decrease CO2 emissions in industrial plants and increase the quality of cement in terms of durability and performance. Currently some additives have been employed as granulated blast furnace slag, limestone and pozzolan. The additives give mortar and concrete larger energy efficiency, gain in durability and resistance, contributing to buildings with slender structures and cheaper and durable maintenance. Besides natural pozzolan can be used artificial ones, as calcined clays, and over a range of amorphous aluminates and silicates waste, with highly reactive function as a binder material in the presence of water and calcium hydroxide. Calcined kaolinite clays were characterized using various techniques such as XRD, thermal analysis, and NMR observing 27Al and 29Si nuclei. The results showed that there is a structural modification of the samples, from crystalline to amorphous phases with the increasing of temperature in the calcination process. There is an improving in the reactivity of calcined clays by the range of 600ºC to 750ºC temperature in the reaction with calcium oxide, according to data from Chapelle test, indicating the possibility of using them as additives for cement and confirming their pozzolanic potential.
The impact of pressure, sliding velocity and property variation of constituents on the sliding behaviour of a model tribofilm was studied with the method of movable cellular automata (MCA). Whereas a clear pressure dependency of the coefficient of friction (COF) was always observed and could be correlated with the structure formation in terms of varying thickness of a mechanically mixed layer, the impact of the other parameters was either negligible or rather weak. Only if a brittle-to-ductile Transition of the oxide-based tribofilm was assumed, a significant decrease in the COF level was predicted.
Temperature-dependent property changes can be neglected during MCA modelling, unless this transition takes place. For magnetite-based tribofilms, the transition temperature is beyond 800 °C, i.e. a temperature leading to fading effects during braking anyway. Thus, it could be concluded that, except for very severe braking conditions, sliding simulations with the MCA method yield meaningful results without considering temperature-dependent mechanical properties.
Optical and scanning electron microscopy, as well as electron microprobe analysis and electron backscatter diffraction, have been used to study diffusion processes that occur in a diffusion pair that consistsof a single-crystal CMSX-10 nickel-base superalloy and polycrystalline nickel, at temperatures of 1050–1250°C. It has been found that, in this system, the distributions of γ-stabilizing elements (Cr, Co, W, and Re) are described by the Boltzmann solution for diffusion between two semiinfinite plates of a binary alloy. The processing of these distributions has shown that the diffusion coefficients of Cr, Co, W, and Re in the multicomponent system are close to those in binary alloys of these elements with Ni. The diffusion redistribution of the elements leads to the dissolution of the γ′ phase in the nickel-base superalloy, growth of nickel grains toward the superalloy constituent of the diffusion pair, and the formation of porosity on both sides of the migrating interface, which is determined from a crystal misorientation of the alloy single crystal and nickel grains.
Industrial production of the cell protectant ectoine: protection mechanisms, processes, and products
(2014)
Bacteria, Archaea and Eukarya can adapt to Saline environments by accumulating compatible solutes in order to maintain an osmotic equilibrium. Compatible solutes are of diverse chemical structure (sugars, polyols, amino acid derivatives) and are beneficial for bacterial cells not only as osmoregulatory solutes, but also as protectants of proteins by mitigating detrimental effects of freezing, drying and high temperatures. The aspartate derivative ectoine is a wide spread compatible solute in Bacteria and possesses additional protective properties compared with other compatible solutes, and stabilizes even whole cells against stresses such as UV radiation or cytotoxins. The protective properties of ectoine for proteins can be explained by its strong (kosmotropic) interaction with water and subsequent exclusion from Protein surface, the decrease of the solubility of the peptide backbone and the strengthening of intramolecular hydrogen bonds (secondary structures). The stabilizing and UV-protective properties of ectoine attracted industry, which saw the potential to market ectoine as a novel active component in health care products and cosmetics. In joint efforts of industry and research large-scale fermentation procedures have been developed with the halophilic bacterium Halomonas elongata used as a producer strain. The two key technologies that allow for the annual production of ectoine on a scale of tons are the bacterial milking procedure and the development and application of ectoine-excreting mutants (“leaky” mutant). The details of these two procedures including the strain development and Fermentation processes will be introduced and current and future applications of ectoine will be discussed.
The roles of microalloying niobium, titanium and vanadium for controlling austenite grain growth, microstructure evolution and hardness were investigated at different simulated heat affected zones (HAZ) for high strength low alloy (HSLA) S690QL steel. High resolution FEG-SEM has been used to characterize fine bainitic ferrite, martensite and nanosized second phases at simulated coarse and fine grain HAZs. It was found that for Ti bearing steel (Ti/N ratio is 2) austenite grain had the slowest growth rate due to the presence of most stable TiN. The fine cuboidal particles promoted intragranular acicular ferrite (IGF) formation. Nb bearing steel exhibited relatively weaker grain growth retardation compared with titanium bearing steels and a mixed microstructure of bainite and martensite was present for all simulated HAZs. IGF existed at coarse grain HAZ of Ti+V bearing steel but it was totally replaced by bainite at fine grain HAZs. Hardness result was closely related to the morphology of bainitic ferrite, intragranular ferrite and second phases within ferrite. The microstructure and hardness results of different simulated HAZs were in good agreement with welded experimental results.
This survey will discuss current and emerging isothermal and rapid polymerase chain reaction (PCR) based nucleic acid amplification methods for patient near diagnostics. To assess the clinical need of rapid diagnostics for infectious diseases based on nucleic acid tests (NATs) we performed and analysed a questionnaire among laboratories participating in corresponding INSTAND ring trials for external quality assurance. The questions concerning new amplification technologies like isothermal nucleic acid amplification, potentially suited to significantly decrease turnaround times, were complemented by questions to evaluate the present status of NATs. Besides end-users, companies were also addressed by sending out a manufacturer specific questionnaire. Analysis of the answers from 48 laboratories in 14 European countries revealed that a much shorter turnaround time is requested for selected pathogens compared to about 2 h or longer when applying temperature cycling amplification, i.e. PCR. In this context, most frequently mentioned were MRSA, norovirus, influenza A and B viruses, cytomegalovirus (CMV) as well as hepatitis B virus (HBV) and hepatitis C virus (HCV). At present, 8% of the laboratories having participated in this survey apply isothermal amplification of nucleic acid to identify infectious pathogens.
Nobody who knows Nico Omenetto will believe that he is going to celebrate his 75th birthday on November 12 this year. There has to be a special elixir which keeps him going strong, enthusiastic and positive. It is certainly his wife Mariella and his son Fiorenzo with family, but also his love for scientific research and teaching. All of us, the spectrochemical community, have benefited from the great enthusiasm which he has invested in finessing the jounal Spectrochimica Acta, Part B for 20 years, spending numerous hours of his free time in handling manuscripts as mediator between authors and referees. We are grateful for his continuous, dedicated commitment to a journal which we all admire. The great appreciation of his colleagues can be observed from the universal support for this Special Issue on behalf of his upcoming birthday. All who were asked immediately agreed to submit contributions.
Starch is one of the most common and easily obtained natural polymers, making it attractive as a potential bio-based alternative to synthetic polymers. This study shows that a simple quaternary ammonium salt combined with urea or glycols forms effective modifiers that produce flexible plastics with good mechanical properties that are comparable to some polyolefin plastics. The processing conditions are shown to significantly affect the structure of the polymer which has a concomitant effect upon the mechanical and physical properties of the resulting plastic. Using a glycerol based modifier results in a totally sustainable and biodegradable material which can be injection moulded.