Filtern
Erscheinungsjahr
- 2012 (2) (entfernen)
Dokumenttyp
Referierte Publikation
- ja (2)
Schlagworte
- Dauerhaftigkeit (2) (entfernen)
Eine Vielzahl zerstörungsfreier Prüfverfahren hat in den letzten Jahren Einzug in die Bauwerksuntersuchung gehalten. Um die Aussagekraft der Einzelverfahren zu erhöhen und den wirtschaftlichen Einsatz weiter voranzubringen, lag es nahe, die Verfahren kombiniert auf einer automatisierten Plattform zu montieren. Zu diesem Zweck wurde das BetoScan-System entwickelt. Um weitere Erfahrungen mit dem BetoScan-System zu erhalten, wurde ein langjährig genutztes Parkhaus aus Stahlbeton mit Gussasphaltfahrbahn als Untersuchungsobjekt ausgewählt. Bei der experimentellen Bauwerksuntersuchung wurden die Verfahren Wirbelstrom, Radar, Ultraschall und Mikrowelle zum Einsatz gebracht. Von der Anwendung des Systems und der Auswertung der Ergebnisse wird in diesem Beitrag berichtet.-----------------------------------------------------------------------------------------
In recent years a variety of non-destructive evaluation methods are more and more used for the inspection of constructions. Increasing the information value of inspections and the economic aspects of applications leads to a combination of methods on an automated system. Therefore, the BetoScan robot was developed. Gaining more experience in applications was realized with the inspection of a car park which was unused for several years. The building was made of reinforced concrete with melted asphalt as floor coating. Within the frame of the inspections eddy current, radar, ultrasound and microwaves were used. The application of the BetoScan system and the results are presented in this article.
In addition to constructional requirements in civil engineering stainless steels often have to fulfil high visual demands. Unexpected impairments of the visual appearance of stainless steels under low corrosive conditions are a widespread problem today. Frequently it is supposed that this is caused by changes in the alloy composition, worse environmental conditions or improper handling. Within a research project the systematic investigation of several cases of damaged stainless steel bars has shown that the reasons are based on well-known material defects like chemical inhomogeneities (e.g. precipitations or local carburization) or geometrical defects (e.g. undercuts, rolling defects or shell formation). Thus, the failures could be clearly identified as production failures of the respective semi-finished products.