Filtern
Erscheinungsjahr
- 2016 (20) (entfernen)
Dokumenttyp
- Vortrag (9)
- Zeitschriftenartikel (4)
- Beitrag zu einem Tagungsband (4)
- Sonstiges (2)
- Posterpräsentation (1)
Schlagworte
- Monitoring (20) (entfernen)
Eingeladener Vortrag
- nein (9)
Die Weiterentwicklung der Verfahren und Techniken zur dauerhaften Überwachung von Bauwerken ist Gegenstand zahlreicher Forschungs- und Entwicklungsvorhaben. Der praktische Einsatz dieser Verfahren beschränkt sich bisher jedoch auf durchaus zahlreiche, jedes für sich jedoch sehr konkrete Einzelprobleme beschreibende Projekte. Einer flächendeckenden Anwendung stehen häufig – berechtigte oder unberechtigte – Bedenken zur Effizienz dieser Verfahren im Vergleich zu baupraktisch etablierten Verfahren wie z. B. regelmäßigen Bauwerksinspektionen entgegen. Weiterführende Aspekte wie optimierte Wartungskonzepte oder Lebensdauerprognosen zur begründeten Priorisierung von Ertüchtigungsmaßnahmen sind aufgrund des Fehlens zeitnah realisierbarer, monetärer Vorteile oftmals schwer vermittelbar. Dieser Beitrag soll einige grundlegende Ziele aktueller Monitoringkonzepte anhand von Projektbeispielen der BAM aufzeigen, um die Potentiale dieser Verfahren zu verdeutlichen und mögliche sinnvolle Anwendungsgebiete zu erschließen. Im Vordergrund dieses Übersichtsbeitrages stehen dabei die grundlegenden Ideen und Ziele dieser Projekte; bezüglich der Ergebnisse wird auf die entsprechenden Fachveröffentlichungen verwiesen.
It is widely recognized that the dynamics of large civil structures, such as bridges or offshore structures, is significantly affected by temperature and other environmental influences. The most significant effect on the structural stiffness is due to temperature variations and especially due to the thermal gradients within the structures cross section. For civil engineering structures, changes in the dynamic response produced by varying environmental conditions can be equivalent or greater than the ones produced by damage.
Therefore, handling the environmental effects has become a major research field for global Structural Health Monitoring. A number of methods and techniques have been developed for addressing this issue for different civil engineering application examples.
An additional question is if temperature changes of stiffness correlate with a change in safety level of the structures bearing capacity which has to be discussed case dependent
In our contribution we show the result of an extensive literature review on the matter of varying temperature, describing the characteristic effects on the structure as well as the various approaches to that issue, including the experiences our work group has gained in the last 20 years of SHM on civil engineering structure.
Ultrasonic methods are well established in various aspects of concrete testing. They are used for imaging the interior geometry of constructions, estimation of concrete strength or monitoring lab investigations. However, so far the detection of distributed damages, especially in an early stage, has been almost impossible. The arrival of new technologies as deep penetration ultrasonic echo devices, new imaging techniques, embedded transducers for permanent monitoring and sensitive data processing techniques adopted from seismology have opened new fields of work. Recent research has been focused to detect changes in concrete elements induced by stress, temperature, moisture or chemical attacks.
The presentation will give an overview on non-destructive testing techniques being developed at the Federal Institute for Materials Research and Testing, Germany (BAM). This includes ultrasonic methods, ground penetration radar, Laser-Induced Breakdown Spectroscopy (LIBS), infrared thermography, pile testing, sensor technology and building scanner. A focus of the talk will be ultrasonic methods, which are well established in various aspects of concrete testing. They are used for imaging the interior geometry of constructions, estimation of concrete strength or monitoring lab investigations. However, so far the detection of distributed damages, especially in an early stage, has been almost impossible. The arrival of new technologies as embedded transducers and sensitive data processing techniques adopted from seismology has opened new field of work. Recent research has been focused to detect changes in concrete elements induced by stress, temperature, moisture or chemical attacks by permanent monitoring. Techniques as Coda Wave Interferometry can resolve changes in ultrasonic velocity in the order of 1*10-5. In addition, many researchers believe that the investigation of nonlinear effects can be used to characterize damages. The presentation will give a wrap up of ultrasonic techniques currently used in practice. This will include echo based methods as multi-channel/multi-offset imaging of structural elements using commercial and prototype devices. Imaging methods as SAFT and RTM will be shortly discussed. The focus will be on the emerging techniques used for monitoring. New types of sensors will be presented as well as the devices used in laboratory and field applications. Insight will be given on the various influence factors on ultrasonic signals and various ways of feature extraction and data processing. The results of lab experiments will be shown to demonstrate the detection of various kind of damages from mechanical load, ASR, corrosion to fatigue. The experiences with our first installations in real constructions (bridges, tunnel) will also be presented.
The presentation will give an overview on non-destructive testing techniques being developed at the Federal Institute for Materials Research and Testing, Germany (BAM). This includes ultrasonic methods, ground penetration radar, Laser-Induced Breakdown Spectroscopy (LIBS), infrared thermography, pile testing, sensor technology and building scanner. A focus of the talk will be ultrasonic methods, which are well established in various aspects of concrete testing. They are used for imaging the interior geometry of constructions, estimation of concrete strength or monitoring lab investigations. However, so far the detection of distributed damages, especially in an early stage, has been almost impossible. The arrival of new technologies as embedded transducers and sensitive data processing techniques adopted from seismology has opened new field of work. Recent research has been focused to detect changes in concrete elements induced by stress, temperature, moisture or chemical attacks by permanent monitoring. Techniques as Coda Wave Interferometry can resolve changes in ultrasonic velocity in the order of 1*10-5. In addition, many researchers believe that the investigation of nonlinear effects can be used to characterize damages. The presentation will give a wrap up of ultrasonic techniques currently used in practice. This will include echo based methods as multi-channel/multi-offset imaging of structural elements using commercial and prototype devices. Imaging methods as SAFT and RTM will be shortly discussed. The focus will be on the emerging techniques used for monitoring. New types of sensors will be presented as well as the devices used in laboratory and field applications. Insight will be given on the various influence factors on ultrasonic signals and various ways of feature extraction and data processing. The results of lab experiments will be shown to demonstrate the detection of various kind of damages from mechanical load, ASR, corrosion to fatigue. The experiences with our first installations in real constructions (bridges, tunnel) will also be presented.
Ultrasonic methods are well established in various aspects of concrete testing. They are used for imaging the interior geometry of constructions, estimation of concrete strength or monitoring lab investigations. However, so far the detection of distributed damages, especially in an early stage, has been almost impossible. The arrival of new technologies as embedded transducers and sensitive data processing techniques adopted from seismology has opened new field of work. Recent research has been focused to detect changes in concrete elements induced by stress, temperature, moisture or chemical attacks by permanent monitoring. Techniques as Coda Wave Interferometry can resolve changes in ultrasonic velocity in the order of 1*10-5. In addition, many researchers believe that the investigation of nonlinear effects can be used to characterize damages. The presentation will give a wrap up of ultrasonic techniques currently used in practice. This will include echo based methods as multi-channel/multi-offset imaging of structural elements using commercial and prototype devices. Imaging methods as SAFT and RTM will be shortly discussed. The focus will be on the emerging techniques used for monitoring. New types of sensors will be presented as well as the devices used in laboratory and field applications. Insight will be given on the various influence factors on ultrasonic signals and various ways of feature extraction and data processing. The results of lab experiments will be shown to demonstrate the detection of various kind of damages from mechanical load, ASR, corrosion to fatigue. The experiences with or first installations in real constructions (bridges, tunnel) will also be presented.
Ultrasonic methods are well established in various aspects of concrete testing. They are used for imaging the interior geometry of constructions, estimation of concrete strength or monitoring lab investigations. However, so far the detection of distributed damages, especially in an early stage, has been almost impossible. The arrival of new technologies as embedded transducers and sensitive data processing techniques adopted from seismology has opened new field of work. Recent research has been focused to detect changes in concrete elements induced by stress, temperature, moisture or chemical attacks by permanent monitoring. Techniques as Coda Wave Interferometry can resolve changes in ultrasonic velocity in the order of 1*10-5. In addition, many researchers believe that the investigation of nonlinear effects can be used to characterize damages.
The workshop will give a wrap up of ultrasonic techniques currently used in practice. This will include echo based methods as multi-channel/multi-offset imaging of structural elements using commercial and prototype devices. Imaging methods as SAFT and RTM will be shortly discussed.
The focus will be on the emerging techniques used for monitoring. New types of sensors will be presented as well as the devices used in laboratory and field applications. Insight will be given on the various influence factors on ultrasonic signals and various ways of feature extraction and data processing. The results of lab experiments will be shown to demonstrate the detection of various kind of damages from mechanical load, ASR, corrosion to fatigue. The experiences with or first installations in real constructions (bridges, tunnel) will also be presented.
The European Water Framework Directive (WFD) 2000/60/EC specifies a list of 33 priority water pollutants. For these substances, Environmental Quality Standards (EQS), equivalent to the maximum allowable concentrations, had been defined at very low levels.
EQS values refer to the whole water body, i.e. include contaminants which are associated to suspended solids or colloids present in the natural water. For several priority pollutants primary analytical methods capable of measuring the target analytes at EQS level in natural water are still missing. The project has developed and validated such methods for three selected compounds, namely Tributyltin (TBT), Polybrominated Diphenylether (PBDE) and Polycyclic Aromatic Hydrocarbons (PAH).
The main task of BAM in the I4S project is the development of online analytics for reliable monitoring of major and minor nutrients like K, P, Ca in soil using mobile-XRF (X-ray fluorescence spectroscopy) and mobile-LIBS (laser-induced breakdown spectroscopy). Each method provides fast and simultaneous multi-element analyses which are neccessary for mapping agricultural cropland. The first objective was to design a combined measurement setup for XRF and LIBS. The centerpiece is the rotatable sample plate which enables the measurement of moving samples. Current steps are the optimisation of the parameters for the analysis of soils.
Im Rahmen der Präsentation werden die Aktivitäten des Fachbereichs 7.2 Ingenieurbau auf dem Gebiet der messtechnischen Überwachung von Bauwerken vorgestellt. Nach einer kurzen Vorstellung der BAM und deren Auftrag, der initiierten Themenfelder und der Abteilung 7 der BAM werden einige der im FB 7.2 durchgeführten Monitoringprojekte anhand von zugrundeliegenden Zielstellungen vorgestellt. Ausführlicher wird auf das Überwachungssystem der Westendbrücke sowie die geplanten Arbeiten am im Rahmen des Themenfelds Infrastruktur genehmigten Projekts BLEIB eingegangen.