Filtern
Erscheinungsjahr
- 2020 (106) (entfernen)
Dokumenttyp
Sprache
- Englisch (106) (entfernen)
Schlagworte
- Laser beam welding (15)
- Additive Manufacturing (11)
- Welding (11)
- Thermography (9)
- Additive manufacturing (8)
- Microstructure (8)
- Tribology (7)
- Mechanical properties (6)
- Wear (6)
- Hot cracking (5)
- Hydrogen (5)
- Process monitoring (5)
- Laser-induced periodic surface structures (LIPSS) (4)
- Post weld heat treatment (4)
- Residual Stress (4)
- Residual stress (4)
- Solidification cracking (4)
- Applications (3)
- Creep-resistant steel (3)
- Element transport (3)
- Friction (3)
- High-strength steel (3)
- Hybrid laser-arc welding (3)
- L-PBF (3)
- LPBF (3)
- Laser Powder Bed Fusion (3)
- Laser implantation (3)
- Laser metal deposition (3)
- Laser powder bed fusion (L-PBF) (3)
- Numerical modelling (3)
- Selective laser melting (SLM) (3)
- Stress relief cracking (3)
- Surface modification (3)
- 316L (2)
- AFM (2)
- AISI 316L (2)
- Atomic force microscopy (2)
- Austenitic stainless steel (2)
- Automated manufacturing (2)
- Bulge effect (2)
- Capability (2)
- Circumferential weld (2)
- Component assessment (2)
- Corrosion (2)
- Cryogenic steel (2)
- Cyclic R-Curve (2)
- Deep penetration (2)
- Diffusible hydrogen (2)
- Diffusion (2)
- Durability (2)
- End crater (2)
- Expansion joint (2)
- Fatigue (2)
- Fatigue strength (2)
- Fatigue tests (2)
- Filler material distribution (2)
- Fracture mechanics (2)
- High-entropy alloy (2)
- Hot stamping (2)
- Hydrogen-assisted cracking (2)
- Implant test (2)
- In situ measurement (2)
- Inconel 718 (2)
- Infrared thermography (2)
- Joint sealing (2)
- LIBS (2)
- LMD (2)
- LTT weld filler materials (2)
- Laser metal deposition (LMD) (2)
- Laser powder bed fusion (2)
- Localized laser dispersing (2)
- Matching ferritic welding electrode (2)
- Mechanical mismatching (2)
- Metal vapor (2)
- Neutron imaging (2)
- Notch stress approach (2)
- Numerical simulation (2)
- Penetration depth (2)
- Performance testing (2)
- Residual stresses (2)
- Structural stress approach (2)
- Time over threshold (2)
- Tubular X-joints (2)
- Varestraint testing (2)
- Welding thermal cycle (2)
- μCT-analysis (2)
- 100Cr6 (1)
- 9%Ni steel (1)
- AISI 304L (1)
- AISI D2 (1)
- Adaptive remeshing (1)
- Additive Fertigung (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing (AM) (1)
- Advanced high-strength steels (1)
- AlSi10Mg (1)
- Alloy 718 (1)
- Analytical chemistry (1)
- Angle dependency (1)
- Artificial neural network (1)
- Atomic Forc Microscopy (1)
- Austenitic stainless steels (1)
- Austenitic welding electrode (1)
- Backlight (1)
- Carbon steel (1)
- Ceramic matrix composites (1)
- Chemical composition (1)
- Chunky graphite degeneration (1)
- Clustering (1)
- Computed Tomography (1)
- Computed tomography (1)
- Computed tomography (CT) (1)
- Computer vision (1)
- Contact resonance (1)
- Correlation microstructure to properties (1)
- Crack (1)
- Creep behavior (1)
- Creep resisting materials (1)
- Critical strain (1)
- Critical strain rate (1)
- Crystallographic texture (1)
- Cyclic R-curve (1)
- Cyclic loading (1)
- DED (1)
- Data fusion (1)
- Deep learning (1)
- Dehydrogenation heat treatment (1)
- Dental materials (1)
- Deuterium (1)
- Die-casted aluminum (1)
- Diffraction (1)
- Digitalization (1)
- Dimensional accuracy (1)
- Directed Energy Deposition (1)
- Directed energy deposition (1)
- Dislocation density (1)
- Displacement (1)
- Dissimilar materials (1)
- Distortion upon baseplate removal (1)
- Ductile cast iron (1)
- Dwell-time (1)
- EBSD (1)
- Effect of scanning strategies (1)
- Electromagnetic field (1)
- Electromagnetic supported degassing (1)
- Electron beam welding (1)
- Emisssivity (1)
- Equivalent heat source (1)
- Error sources analysis (1)
- FAT class approach (1)
- Fatigue Crack Growth (1)
- Fatigue Strength (1)
- Fatigue crack initiation (1)
- Femtosecond laser ablation (1)
- Femtosecond laser processing (1)
- Filler material (1)
- Filler wire (1)
- Finite Element Method (1)
- Force-distance curves (1)
- Fractography (1)
- Fracture Mechanics (1)
- GMA welding (1)
- Gas metal arc welding (1)
- Geteilte Infrastruktur (1)
- Hardness (1)
- Hastelloy X (1)
- Heat Treatment (1)
- Heat input (1)
- Heat treatment (1)
- Heat-affected zone (1)
- High Entropy Alloy (1)
- High Entropy Alloys (1)
- High entropy alloy (1)
- High strength steels (1)
- High-strength low-alloy steel (1)
- Hold time (1)
- Hot crack (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Hybrid laser arc welding (1)
- Hydrogen diffusion (1)
- Hydrogen embrittlement (1)
- I-TRIBOMAT (1)
- Implants (1)
- In-situ Monitoring (1)
- Instumented indentation test (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter layer time (1)
- Joining technology (1)
- Kernel average misorientation (1)
- Keyhole mode welding (1)
- L-PBF IN718 material (1)
- LIBS TIG welding (1)
- LTT filler metal (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Lack-of-fusion (1)
- Lamé curves approximation (1)
- Laser (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser beam melting (LBM) (1)
- Laser hybrid welding (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Lifetime (1)
- Liquid metal embrittlement (1)
- Lorentz force (1)
- Low cycle fatigue (1)
- Low feed rates (1)
- Low transformation temperature (1)
- Lubricants (1)
- MVT (1)
- MWIR (1)
- Machining (1)
- Magnetohydrodynamics (1)
- Materials database (1)
- Mathematical modeling (1)
- Mechanical-technological properties (1)
- Medium Entropy Alloys (1)
- Melt pool defects (1)
- Melt pool depth (1)
- Metal (1)
- Micro computed tomography (1)
- Microbiologically influenced corrosion (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Modelling studies (1)
- Molten pool dynamics (1)
- Molybdenum carbide (1)
- Multiple crack propagation (1)
- NIR (1)
- Near-surface X-ray diffraction (1)
- Neutron Diffraction (1)
- Neutron diffraction (1)
- Neutron radiography (1)
- Neutron tomography (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- Nickel (1)
- Niobium carbide (1)
- Numerical Simulation (1)
- Numerical investigation (1)
- Numerical modeling (1)
- Online Process Monitoring (1)
- Open data (1)
- Open science (1)
- Optical flow (1)
- Optical measurement technique (1)
- Optical tomography (1)
- Oscillating ball-on-disc test (1)
- Partial penetration welding (1)
- Path planning (1)
- Piezoresistive cantilever (1)
- Pipeline steel of grade X120 (1)
- Polymers (1)
- Pool dimensions (1)
- Porosity (1)
- Potentiodynamic Polarization (1)
- Ppreheating temperature (1)
- Preheating (1)
- Prostheses (1)
- Pulse electric current sintering (1)
- Reactor conditions (1)
- Reference standards (1)
- Refraction (1)
- Relative humidity (1)
- Research data management (1)
- Residual stress in AM (1)
- Resistance spot welding (1)
- Retained Austenite (1)
- Review (1)
- Roughness (1)
- S-N curve (1)
- SEM (1)
- SIMS (1)
- SMAW (1)
- SS316L alloy (1)
- SWIR (1)
- Safety (1)
- Scanning Kelvin Probe Force Microscopy (1)
- Scanning kelvin probe force microscopy (1)
- Scattering (1)
- Seam geometry (1)
- Selective Laser Melting (SLM) (1)
- Selective laser beam melting (1)
- Shared infrastruture (1)
- Ship building (1)
- Short Crack Propagation (1)
- Sicherer Umgang (1)
- Sicherheit (1)
- Simulation (1)
- Single-pass welding (1)
- Software (1)
- Solidification (1)
- Spectroscopy (1)
- Stainless Steel (1)
- Staircase method (1)
- Statistical analysis (1)
- Steady-state weld pool (1)
- Supermartensitic steel (1)
- Surface processing (1)
- Surface texturing (1)
- TEKKEN test (1)
- Texture (1)
- Thermal cycles (1)
- Thick-walled steel (1)
- Ti-6Al-4V (1)
- TiB2 (1)
- TiC (1)
- TiN (1)
- Titanium carbide (1)
- ToF-SIMS (1)
- Toughness (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tribo-tests (1)
- Tribological data (1)
- Tribologie (1)
- Triobology (1)
- Ultrasonic machining (1)
- V-notch impact toughness (1)
- Varestraint test (1)
- Wasserstoff (1)
- Weld end crater (1)
- Weld metal (1)
- Weld root (1)
- Weld toe geometry (1)
- Welding processing influences (1)
- Welding residual stresses (1)
- Welding simulation (1)
- Werkstoffdatenbank (1)
- White light interferometry (1)
- X-ray Diffraction (1)
- X-ray diffraction (1)
- contact resonance (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (106) (entfernen)
Eingeladener Vortrag
- nein (29)
As opposed to reviewing results on experimental determination of residual stress by diffraction, this paper discusses the open issues when dealing with residual stress determination in additive manufactured parts, in particular those manufactured with laser powder bed fusion techniques. Three points are addressed in detail: (a) the proper determination of the strain-free reference d0, (b) the problem of the determination of the principal axes, and (c) the use of the correct diffraction elastic constants. It is shown that all methods to determine the strain-free reference d0 suffer from caveats, and care must be taken in evaluating the most suitable for the problem being tackled. In addition, it is shown that, in some systems, the principal axes do correspond to the geometrical axes of the specimen, but this needs to be systematically checked, especially in the case of uni- or bidirectional hatching strategies. Finally, the need to experimentally determine the proper diffraction elastic constants is underlined, especially in the case of strongly textured specimens, which again depends on the deposition strategy.
A new approach towards performance-related design and scientific evaluation of joint sealing systems
(2020)
While there is a permanent improvement of concrete pavement mixtures and pavement construction types over the last decades, the state-of-the-art joint sealing materials and joint constructions seem to stagnate on an antiquated empirical level. This status has been reaffirmed in the latest European standard.
The consequences in the motorway network due to unsatisfying capability and durability of joint sealing systems are unacceptable. In addition, inadequate traffic performance (noise emissions, roll-over comfort) and traffic safety losses in the joint area of concrete pavements are existing challenges. These deficits and weaknesses reflect a demand for joint sealing materials and constructions whose approval requirements take functional aspects into account. Furthermore a sufficient analysis of decisive loads and a practice-oriented method to evaluate the requirements towards performance and durability is still missed.
In this contribution decisive loads to German highways are analyzed. The design of test specimen for representative functional testing of joint sealing systems is discussed. The focus is on the geometry of the test specimens and the used concrete mixture. Finally, a new approach for a function-orientated test concept that considers representative load functions is presented. The potential of this approach to validate the durability and capability of various joint sealing systems is also presented using an example.
While there is a permanent improvement of concrete pavement mixtures and pavement construction types over the last decades, the state-of-the-art joint sealing materials and joint constructions seem to stagnate on an antiquated empirical level. This status has been reaffirmed in the latest European standard. The consequences in the motorway network due to unsatisfying capability and durabilty of joint sealing systems are unacceptable. In addition, inadequate traffic performance (noise emissions, roll-over comfort) and traffic safety losses in the joint area of concrete pavements are existing challenges. These deficits and weaknesses reflect a demand for joint sealing materials and constructions whose approval requirements take functional aspects into account. Furthermore a sufficient analysis of decisive loads and a practice-oriented method to evaluate the requirements towards performance and durability is still missed. In this contribution decisive loads to German highways are analyzed. The design of test specimen for representative functional testing of joint sealing systems is discussed. The focus is on the geometry of the test specimens and the used concrete mixture. Finally, a new approach for a function-orientated test concept that considers representative load functions is presented. The potential of this approach to validate the durability and capability of various joint sealing systems is also presented using an example.
Contact-resonance AFM (CR-AFM) has been used in recent years for the measurement of mechanical properties. Compared with other techniques, CR-AFM has a much shorter acquisition time, compensating the incomplete theoretical understanding of the underlying physical phenomena. In the present paper, we propose a procedure, which allows to determine the elastic modulus of the sample as a parameter of the fit of the CR frequency as a function of the load. It is concluded that CR measurements are not appropriate for polymer samples. Major drawbacks are the bad resolution for moduli lower than ca. 10 GPa and the lack of a comprehensive physical model.
The two-part paper series provides an overview on the state-of-the-art in the application of engineering fracture mechanics to weldments limited to butt and fillet welds with crack initiation at weld toes. In the present second part, one focus is on welding residual stresses, their characteristics and stability under cyclic loading and their effect on structural integrity. Subsequently, features will be addressed which are essential for applying fracture mechanics to overall fatigue life and fatigue strength considerations of weldments. These comprise fatigue life relevant initial crack sizes and multiple crack initiation and Propagation due to various stress peaks along the weld toe. A concept is briefly introduced which covers all these aspects.
The understanding of process-microstructure-property-performance (PMPP) relationships in additive manufacturing (AM) of metals is highly necessary to achieve wide-spread industrial application and replace conventionally manufactured parts, especially regarding safety-relevant applications. To achieve this understanding, reliable data and knowledge regarding material’s microstructure-property relationships (e.g. the role of defects) is needed, since it represents the base for future more targeted process optimizations and more reliable calculations of performance. However, producing reliable material data and assessing the AM material behaviour is not an easy task: big challenges are e.g. the actual lack of standard testing methods for AM materials and the occasional difficulties in finding one-to-one comparable material data for the conventional counterpart.
This work aims to contribute to end this lack of reliable material data and knowledge for the low cycle fatigue behaviour of the most used titanium alloy in aerospace applications (Ti-6Al-4V). For this purpose, two sets of test specimens were investigated. The first set was manufactured from cylindrical rods produced by an optimized DED-L process and the second was manufactured from a hot formed round bar. The test specimens were cyclically loaded until failure in the low-cycle-fatigue (LCF) regime. The tests were carried out according to ISO 12106 between 0.3 to 1.0 % axial strain amplitude from room temperature up to 400°C. The LCF behaviour is described and compared between materials and with literature values based on cyclic deformation curves and strain-based fatigue life curves. Besides, the parameters of Manson-Coffin-Basquin relationship were calculated. The microstructures (initial and after failure) and fracture surfaces were comparative characterized. Thereby, the focus lied on understanding the role of grain morphology and defects on the failure mechanisms and fatigue lifetimes. For this latter characterization, optical microscopy (OM), scanning electron microscopy (SEM) and micro computed tomography (µCT) were used.
In additive manufacturing (AM) directed energy deposition (DED), parts are built by welding layers of powder or wire feedstock onto a substrate with applications for steel powders in the fields of forging tools, spare parts, and structural components for various industries. For large and bulky parts, the choice of toolpaths influences the build rate, the mechanical performance, and the distortions in a highly geometry-dependent manner. With weld-path lengths in the range of hundreds of meters, a reliable, automated tool-path generation is essential for the usability of DED processes. This contribution presents automated tool-path generation approaches and discusses the results for arbitrary geometries. Socalled “zig-zag” and “contour-parallel” processing strategies are investigated and the tool-paths are automatically formatted into machine-readable g-code for experimental validation to build sample geometries. The results are discussed in regard to volume-fill, microstructure, and porosity in dependence of the path planning according to photographs and metallographic cross-sections.
Liquid metal embrittlement (LME) cracking can occur during resistance spot welding (RSW) in zinc-coated advanced high-strength steels (AHSS) for automotive production. In this study, a methodological variation of hold time is performed to investigate the process-related crack influence factors. A combination of numerical and experimental investigations confirms, that the extent of heat dissipation and re-heating of the sheet surface can be influenced and thus the degree of crack formation can be controlled in a targeted manner by the parameterisation of the hold time. The temperature and stress history of crack-free and crack-afflicted spot welds are analysed and a conclusion on the borders defining the LME active region is derived.
A European EMPIR project, which aims to use large-scale piezoresistive microprobes for contact resonance applications, a well-established measurement mode of atomic force microscopes (AFMs), is being funded. As the probes used in this project are much larger in size than typical AFM probes some of the simplifications and assumptions made for AFM probes are not applicable. This study presents a guide on how to systematically create a model that replicates the dynamic behavior of microprobes, including air damping, nonlinear sensitivities, and frequency dependencies. The model is then verified by analyzing a series of measurements.
The use of low transformation temperature (LTT) filler materials represents a smart approach for increasing the fatigue strength of welded high strength steel structures apart from the usual procedures of post weld treatment. The main mechanism is based on the effect of the low start temperature of martensite formation on the stress already present during welding. Thus, compressive residual stress formed due to constrained volume expansion in connection with phase transformation become highly effective. Furthermore, the weld metal has a high hardness that can delay the formation of fatigue cracks but also leads to low toughness. Fundamental investigations on the weldability of an LTT filler material are presented in this work, including the characterization of the weld microstructure, its hardness, phase transformation temperature and mechanical properties. Special attention was applied to avoid imperfections in order to ensure a high weld quality for subsequent fatigue testing. Fatigue tests were conducted on the welded joints of the base materials S355J2 and S960QL using conventional filler materials as a comparison to the LTT filler. Butt joints were used with a variation in the weld type (DY-weld and V-weld). In addition, a component-like specimen (longitudinal stiffener) was investigated where the LTT filler material was applied as an additional layer. The joints were characterized with respect to residual stress, its stability during cyclic loading and microstructure. The results show that the application of LTT consumables leads to a significant increase in fatigue strength when basic design guidelines are followed. This enables a benefit from the lightweight design potential of high-strength steel grades.