Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (12)
- Beitrag zu einem Tagungsband (3)
- Beitrag zu einem Sammelband (2)
- Vortrag (1)
- Sonstiges (1)
Sprache
- Englisch (19) (entfernen)
Schlagworte
- Sewage sludge ash (5)
- Thermochemical treatment (5)
- Phosphorus recovery (4)
- Ash treatment (3)
- Sewage sludge (3)
- Thermo-chemical treatment (3)
- Lichtbogenofen (2)
- Mineral phases (2)
- Mono-incineration (2)
- P-recovery (2)
Eingeladener Vortrag
- nein (1)
Commercial native lipase A from Candida antarctica was used to produce alkyl esters through the alcoholysis of (waste) fats with 2-ethyl-1-hexanol. The process was carried out in batch stirred tank reactors (from 100 mL up to 3000 L).
The content of alkyl esters in reaction mixtures was determined by gradient HPLC using an evaporative light scattering detector and the reaction progress was controlled by determining the ratio of the palmitic acid ester peak area to the oleic acid ester peak area in HPLC chromatograms.
The results show that alcoholysis is the favoured reaction in presence of excess water and water-insoluble alcohols in comparison with hydrolysis (fatty acid content <5%). The optimum amount of water for the alcoholysis was found to be 80-100% of the amount of fat. In the presence of low quantities of water both alcoholysis and hydrolysis are slow.
Conversion rate increases with increasing temperature to 65-70 °C.
Based on these results a large-scale test to produce 3000 L of alkyl ester (to be used as lubricant coolant) was carried out. The experiments have proved that alcoholysis is completed after about 7-10 h depending on temperature.
The Rietveld method was used to reliably interpret severely superimposed diffraction patterns of a sewage sludge ash before and after being turned into an ecologically desirable, high-quality fertilizer by a newly-developed method of thermochemical treatment. The thermochemical treatment causes severe changes in the phase composition of the ash, which can be described as a mixture of a large number of solid solution phases.
New horizons of the structural characterization of stainless steel slags by X-ray powder diffraction
(2007)
The sequence of reactions accompanying the thermochemical treatment of an iron- and aluminium-bearing sewage sludge ash was ascertained by investigating two systematic series of samples. The ash was thermochemically treated in a lab-scale rotary furnace after mixing it with a chlorine-donor, either CaCl2 or MgCl2. Within each of these two sample series only a single process parameter, the reaction temperature, was varied, namely between 350 and 1050°C. It was found, that among the numerous crystalline phases present in the raw ash only quartz and hematite continue to exist after thermochemical treatments carried out at 1050°C, whereas all other components undergo at least one decomposition-recrystallization cycle. Some of the components re-crystallize even several times. It was proved that the restructuring of the calcium- and phosphorus-bearing mineral phases proceeds via the formation of chlorspodioside, Ca2PO4Cl. The influence of the type of chlorine-donor on the final product was elucidated in detail and - to the best of our knowledge - for the first time crystalline AlPO4 was found in a sewage sludge ash and its decomposition was investigated, too.
Municipal sewage sludge is a carrier of nutrients most important phosphorus (P) but also contains organic pollutants and heavy metals. A two steps thermal treatment based on 1. mono-incineration of sewage sludge under destruction of organic pollutants and 2. thermochemical treatment of the resulting ashes to remove heavy metals and increase P-bioavailability is suggested by the authors. The process aims at P-fertilisers production from sewage sludge. Seven sewage sludge ashes of different origin and composition and one residue from gasification of sewage sludge were thermochemically treated. The raw ashes were mixed with a chlorine donor (e.g. MgCl2) and thermally treated in a gas tight lab-scale rotary furnace. The distributions of the heavy metals between solid and gas phase were determined. The heavy metals concentrations of the treated ashes matched the legislative limits in most cases. The products from thermochemical treatment are suited raw materials for P-fertiliser production. Relevant process parameters such as temperature, type and concentration of Cl-donor and retention time were optimised for the thermochemical treatment step.
The recycling of refractory materials in the chemical, metallurgical and glass industry has only had minor relevance until now because of the high performance required from these materials (stability against corrosion, inert when coming into contact with the glass melt, etc.). Refractory lifetimes are limited because of corrosion at higher temperatures. The best furnace lifetimes has been achieved with chromium oxide and chromium oxide corund refractories. Waste from the production and use of refractory material is generated in three main forms: as residues from cutting and grinding, as refractories which have limited or no contact with glass melts, and as refractories with infiltration of sublimation residues or condensates. The waste material is classified as hazardous waste due to its chromium content. In this study, arc furnace technology was used for thermal treatment of the waste materials to enable recycling of refractory materials. (author abst.)
Municipal sewage sludge is a carrier of nutrients most important phosphorus (P) but also contains organic pollutants and heavy metals. A two steps thermal treatment is suggested based on 1. mono-incineration of sewage sludge under destruction of organic pollutants and 2. thermochemical treatment of the resulting ashes to remove heavy metals and increase P-bioavailability. The targeted products are marketable P-fertilisers. The thermochemical treatment was investigated in a gas tight lab-scale rotary furnace. Seven sewage sludge ashes of different origin and composition and one residue from gasification of sewage sludge were mixed with a chlorine donor (e.g. MgCl2) and thermochemically treated under systematic variation of operational parameters. The distributions of the heavy metals between solid and gas phase were determined. The heavy metals concentrations of the treated ashes met the legislative limits in most cases. The products from thermochemical treatment are suited raw materials for P-fertiliser production. Relevant process parameters such as temperature, type and concentration of Cl-donor and retention time were optimised for the thermochemical treatment step.