Filtern
Dokumenttyp
Sprache
- Englisch (14) (entfernen)
Schlagworte
- Scaled boundary finite element method (9)
- Dispersion (8)
- Guided waves (8)
- Lamb waves (4)
- Scaled Boundary Finite Element Method (3)
- Simulation (3)
- Crack detection (2)
- Cracks (2)
- Cylinders (2)
- Non-destructive testing (2)
In this paper, a method is presented for the numerical computation of dispersion properties and mode shapes of guided waves in plate structures. The formulation is based on the Scaled Boundary Finite Element Method. The through-thickness direction of the plate is discretized in the finite element sense, while the direction of propagation is described analytically. This leads to a standard eigenvalue problem for the calculation of wave numbers. The proposed method is not limited to homogeneous plates. Multi-layered composites as well as structures with continuously varying material parameters in the direction of thickness can be modeled without essential changes in the formulation. Higher-order elements have been employed for the finite element discretization, leading to excellent convergence for complex structures. It is shown by numerical examples that this method provides highly accurate results with a small number of nodes while avoiding numerical problems and instabilities.
In this paper a numerical approach is presented to compute dispersion curves for solid waveguides coupled to an infinite medium. The derivation is based on the scaled boundary finite element method that has been developed previously for waveguides with stress-free surfaces. The effect of the surrounding medium is accounted for by introducing a dashpot boundary condition at the interface between the waveguide and the adjoining medium. The damping coefficients are derived from the acoustic impedances of the surrounding medium. Results are validated using an improved implementation of an absorbing region. Since no discretization of the surrounding medium is required for the dashpot approach, the required number of degrees of freedom is typically 10 to 50 times smaller compared to the absorbing region. When compared to other finite element based results presented in the literature, the number of degrees of freedom can be reduced by as much as a factor of 4000.
In this paper the Scaled Boundary Finite Element Method (SBFEM) is applied for the simulation of Lamb waves in cracked plates. This method is highly advantageous to study the interaction of different Lamb wave modes with cracks as the crack is not discretized and no refinement is required around the crack tip. Numerical examples are presented for the reflection of the fundamental symmetric and antisymmetric modes from cracks of different depth. The spatial Fourier transformation is employed to calculate the amplitudes of reflected Lamb wave modes. The results reveal possibilities to obtain details of the crack geometry in non-destructive testing and structural health monitoring applications.
In this paper a numerical approach, based on the Scaled Boundary Finite Element Method (SBFEM), is described to obtain dispersion relations for propagating modes in wave guides. While the formulation is developed for plate structures, it can easily be extended to wave guides with arbitrary cross-section. The cross-section is discretized in the Finite Element sense while all equations remain analytical in the direction of propagation. The wave numbers of all propagating modes are obtained as the solutions of a standard eigenvalue problem. The group velocities can be calculated accurately as the eigenvalue derivatives. The use of higher-order elements drastically increases the efficiency and accuracy of the computation. This approach can be used for wave guides with arbitrary distribution of material parameters.
The simulation of guided waves in plate structures and cylinders coupled to infinite fluids is addressed. The approach is based on the Scaled Boundary Finite Element Method. Only a straight line is discretized that represents the through-thickness direction or the radial direction. The surrounding fluid is accounted for by employing a damping boundary condition that is based on the analytical description of the radiation impedance. Since the radiation impedance is a function of the wavenumber in the waveguide, an iterative solution procedure is applied. The algorithm is highly efficient while the results are in agreement with the Global Matrix Method.
This paper presents recently developed approaches for the numerical simulation of guided elastic waves in structures that are embedded in infinite fluid or solid media. The waveguide is described by the Scaled Boundary Finite Element Method, which is a general semi-analytical method that requires discretization of the boundary only. The influence of the surrounding medium on the wave propagation inside the waveguide is accounted for by appropriate boundary conditions. It is demonstrated that for many practical applications a formulation based on simple dashpot boundary conditions yields sufficiently accurate results. To increase accuracy for fluids, an alternative formulation based on exact boundary conditions and inverse iteration is proposed. This approach is of use particularly if the acoustic properties of the waveguide and surrounding material are similar.
Numerical modelling of lamb waves in cracked plates using the scaled boundary finite element method
(2013)
Numerical simulation of ultrasonic guided waves using the scaled boundary finite element method
(2012)
The formulation of the Scaled Boundary Finite Element Method is applied for the computation of dispersion properties of ultrasonic guided waves. The cross-section of the waveguide is discretized in the Finite Element sense, while the direction of propagation is described analytically. A standard eigenvalue problem is derived to compute the wave numbers of propagating modes. This paper focuses on cylindrical waveguides, where only a straight line has to be discretized. Higher-order elements are utilized for the discretization. As examples, dispersion curves are computed for a homogeneous pipe and a layered cylinder.
In this paper we propose an algorithm to compute specific parts of the dispersion curves for elastic waveguides. The formulation is based on an axisymmetric representation of the Scaled Boundary Finite Element Method, where the wavenumbers of propagating modes are obtained as solutions of a Hamiltonian eigenvalue problem. The novel solution procedure involves tracing selected modes over a given frequency range and computing the corresponding solutions by means of inverse iteration. The resulting algorithm is applied in the context of material characterization, where the efficiency of the computation is crucial.