Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (15)
- Vortrag (10)
- Beitrag zu einem Sammelband (8)
- Zeitschriftenartikel (4)
- Dissertation (3)
- Posterpräsentation (1)
Sprache
- Englisch (41) (entfernen)
Schlagworte
- Zerstörungsfreie Prüfung (41) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (10)
The combination of tomographic, microstructural data with other experimental techniques and with modeling is paramount, if we want to extract the maximum amount of information on material and component properties. In particular, quantitative image analysis, statistical approaches, direct discretization of tomographic reconstructions represent concrete possibilities to extend the power of the tomographic 3D representation to insights into the material and component performance. This logic thread holds equally for industrial and academic research, and valorizes expensive experiments such as those carried out at synchrotron sources, which cannot be daily repeated.
I will show a few examples of possible use of X-ray tomographic data for quantitative assessment of damage evolution and microstructural properties, as well as for non-destructive testing. Examples of micro-structured inhomogeneous materials will be given, such as Composites, Ceramics, Concrete, and Additively manufactured parts. I will also show how X-ray refraction computed tomography (CT) can be highly complementary to classic absorption CT, being sensitive to internal interfaces.
The combination of tomographic, microstructural data with other experimental techniques and with modeling is paramount, if we want to extract the maximum amount of information on material and component properties. In particular, quantitative image analysis, statistical approaches, direct discretization of tomographic reconstructions represent concrete possibilities to extend the power of the tomographic 3D representation to insights into the material and component performance. This logic thread equally holds for industrial and academic research, and valorizes expensive experiments such as those carried out at synchrotron sources, which cannot be daily repeated.
I will show a few examples of possible use of X-ray tomographic data for quantitative assessment of damage evolution and microstructural properties, as well as for non-destructive testing. Examples of micro-structured inhomogeneous materials will be given, such as Composites, Ceramics, Concrete, and Additively manufactured parts. I will also show how X-ray refraction computed tomography (CT) can be highly complementary to classic absorption CT, being sensitive to internal interfaces.
Additionally, I will present a new technique in our portfolio, Neutron Diffraction, which is extremely well suited to the study of internal stresses, both residual and under external load.
The combination of tomographic, microstructural data with other experimental techniques and with modeling is paramount, if we want to extract the maximum amount of information on material and component properties. In particular, quantitative image analysis, statistical approaches, direct discretization of tomographic reconstructions represent concrete possibilities to extend the power of the tomographic 3D representation to insights into the material and component performance. This logic thread holds equally for industrial and academic research, and valorizes expensive experiments such as those carried out at synchrotron sources, which cannot be daily repeated.
Nondestructive testing (NDT) methods are applicable in many ways for defect detection as well as optimization of packaging production processes. The visual inspection method is the technique which is mostly used, although neither the customer nor a skilled inspector may be aware of this.
Techniques like ultrasound for wall thickness measurement, the application of x-ray techniques or the use of dye penetrant techniques for crack detection are rather well known to the NDT family. However, acoustic emission techniques can also be helpful for the characterization of packaging materials. In this paper the employment of x-ray computer tomography (CT) for measurement of wall thickness in plastic jerrycans, especially on the edges, and its possible optimization of production processes will be discussed.
A comparison of the CT and ultrasonic examinations of wall thickness and the reliability of this measured data are also important points for the discussion, especially if some safety factors can be derived from the results.
The leakage test is also good for jerrycans, IBCs or other kinds of drums for the transportation and storage of dangerous goods. The disadvantage of this kind of test is that a lack of quality, e.g. wall thickness deterioration, cannot be detected if the wall thickness withstands the internal pressure. Therefore, especially for Quality assurance, the other, previously mentioned techniques are better for a statistical assessment of a batch. This paper is focused on the comparison of different NDT results with special emphasis on the large range of material mechanical properties.
The aim of this work is to evaluate the feasibility of the direct radiography on weld
inspection in oil pipelines and gas pipeline during the manufacturing process. To that, 6 specimens
with 6 different thickness and varied height of reinforced weld with 5 different kinds of defects
were made. All samples were radiographied using Class I films and flat panel. For all specimens the
inspection length was 8''. Thus, with the flat panel the detector-to-object distance varied so that it
may adequate to several diameters of the tubes.
The detector-to-object distance was calculated based on the physical size of the detector
taking into consideration a safe distance between the tube curvature and the flat panel extremities,
keeping the lowest possible magnification factor so that it could be obtained the length of the
inspection. Images with 6 integration time for each experimental arrangement were obtained.
The images obtained with the Flat Panel/YXLON system were analyzed according to their
quality by using the Contrast parameters (essential wire) (DNV 2007/ IS0 12096 with
reinforcement and ISO 10893-7 basis material), Basic Spatial Resolution BSR (ISO 10893-7)
and normalized signal-to-noise ratio - SNRN (ISO 10893-7) and by detectability using as reference
the conventional radiography.
The results showed that for all thickness, the exposure time used to meet the image quality
requirements were below with direct radiography. However the BSR were not reached for thickness
of 4.85, 6.40 and 9.67 mm, therefore the compensation principle established by ISO 10893-7 was
considered, that is, one more contrast wire for a less wire pair.
The digital technique proved to be more sensitive to real defects found on welds than the
conventional technique. Then it can be conclude that the digital radiography utilizing the flat panel
can be applicable to the oil and gas segment with advantages over conventional technique as to
quality aspects, productivity, environment, safety and health.
Non-Destructive Evaluation (NDE) of structures is complex due to the uniqueness of almost all structures and their sizes. A single NDT method typically is not sufficient to meet the testing requirements, which cover different areas, such as material and structural properties. Measuring geometrical properties require other test methods than e.g. the detection of corrosion. Automation has proven to be necessary for aquiring large amounts a of high quality data in a short time. Examples of succesful method combinations from different areas of non-destructive testing in civil engineering are briefly described and their application is shown. Some of the examples also include automated inspection.