Filtern
Dokumenttyp
- Zeitschriftenartikel (9)
- Vortrag (1)
Sprache
- Englisch (10)
Schlagworte
- Thermal stability (10) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
Self-reactive substances are unstable chemical substances which can easily decompose and may lead to explosion in transport, storage, or process situations. For this reason, their thermal stability properties are required to assess possible process safety issues and for classification purpose. In this study, the first quantitative structure–property relationships (QSPR) dedicated to this class of compounds were developed to predict the heat of decomposition of possible self-reactive substances from their molecular structures. The database used to develop and validate the models was issued from a dedicated experimental campaign on 50 samples using differential scanning calorimetry in homogeneous experimental conditions. QSPR models were derived using the GA-MLR methods (using a genetic algorithm and multi-linear regressions) using molecular descriptors calculated by Dragon software based on two types of inputs: 3D molecular structures determined using the density functional theory (DFT), allowing access to three-dimensional descriptors, and from SMILES codes, favoring the access to simpler models, requiring no preliminary quantum chemical calculations. All models respected the OECD validation guidelines for regulatory ac
ceptability of QSPR models. They were tested by internal and external validation tests and their applicability domains were defined and analyzed.
In this work, a series of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivative salts containing phosphorus and nitrogen were synthesized, and their effects on mechanical properties, thermal stability and flame retardancy of flexible polyurethane foam (FPUF) were investigated. Studies have shown that the addition of DOPO derivatives will increase the tensile strength, compression set, and compression hardness of FPUF, but it will lead to a decrease in elongation at break. Thermogravimetric analysis showed that the initial decomposition temperature of FPUF containing DOPO derivatives was reduecd, but the char reside was significantly improved. A series of combustion tests indicated that the addition of DOPO derivative salts can improve the flame retardancy of FPUF, of which 10-hydroxy-9,10-dihydro-9-oxa-10 phosphaphenanthrene-10-oxide dicyandiamide salt (D-DICY) exhibited the best flame retardancy. When the load of D-DICY was 20 phr, the limiting oxygen index (LOI) of foam reached 24.5%, and the peak heat release rate and total heat release were decreased by 55.7% and 52.9%, respectively. Furthermore, based on the analysis of the gas phase combustion products and the char residue of the condensed phase, the possible flame retardant mechanism was proposed.
Aim of the present study was to investigate the effect of the method of demethoxylation on the particle structure and techno-functional properties of pectins with different degree of methoxylation and distribution of free carboxyl groups. Two groups of model pectins, one with 57% and one with 42% degree of methoxylation have been prepared from one single commercial pectin. Modifications were performed by an acidic and two enzymatic methods using fungal and plant-derived pectin methyl esterases. Thermal stability was investigated by thermal analysis and water uptake was determined by a sorption and a capillary sucking method.
The enzyme-treated pectins were thermally less stable than the acid-treated. The water uptake of enzyme-treated pectins was higher than in acid-treated samples in the sorption method and lower in the capillary sucking tests. The different behaviour is explained by differences in pH during demethoxylation and a co-occurring variation in sodium content. Both parameters affected intermolecular interactions of the pectin macromolecules in solution, which resulted in differences in the particle morphology. The effect of the distribution of free carboxyl groups (statistical or block-wise) on the techno-functional properties was more pronounced in high-methoxylated pectins than in low-methoxylated pectins.
Thin poly(acrylic acid) PAA films were deposited by pulsed plasma polymerization on different organic and inorganic substrates. The structureproperty relationships of the deposited acrylic acid polymers were studied in dependence on the monomer pressure by various techniques and probes. The surface and bulk properties of the plasma deposited films were investigated by X-ray photoelectron spectroscopy, attenuated total reflection infrared, and broad band dielectric spectroscopy. The experimental infrared frequencies of PAA films are compared with those predicted from quantum mechanical calculation. The concentration of the COOH groups in the film (stored in ambient air) decreased by about 15 % compared to the as-prepared sample. The plasma deposited PAA probably form a highly branched product. However, the dielectric measurements show that in addition to the hydrogen bonds, self condensation process was able to hinder the localized fluctuation as well. These processes lead to form a cross-linked network polymer film. Nevertheless, a low energy is sufficient to break these processes during heating at atmospheric pressure. Therefore, homogenized samples with free branches (functional group) were obtained after a first heating with structures close to conventional polymerized acrylic acid. Thus, a thermally stable product was obtained.
Rigid rod-type metallo-supramolecular coordination polyelectrolytes with Fe(II) centres (Fe-MEPEs) are produced via the self-assembly of the ditopic ligand 1,4-bis(2,2':6',2''-terpyridine-4'-yl)benzene (tpy-ph-tpy) and Fe(II) acetate. Fe-MEPEs exhibit remarkable electrochromic properties; they change colour from blue to transparent when an electric potential is applied. This electrochemical process is generally reversible. The blue colour in the ground state is a result of a metal-to-ligand charge transfer at the Fe(II) centre ion in a quasi-octahedral geometry. When annealed at temperatures above 100 °C, the blue colour turns into green and the formerly reversible electrochromic properties are lost, even after cooling down to room temperature. The thermally induced changes in the Fe(II) coordination sphere are investigated in situ during annealing of a solid Fe-MEPE using X-ray absorption fine structure (XAFS) spectroscopy. The study reveals that the thermally induced transition is not accompanied by a redox process at the Fe(II) centre. From the detailed analysis of the XAFS spectra, the changes are attributed to structural changes in the coordination sphere of the Fe(II) site. In the low temperature state, the Fe(II) ion rests in a quasi-octahedral coordination environment surrounded by six nitrogen atoms of the pyridine rings. The axial Fe–N bond length is 1.94 Å, while the equatorial bond length amounts to 1.98 Å. In the high temperature state, the FeN6-site exhibits a distortion with the axial Fe–N bonds being shortened to 1.88 Å and the equatorial Fe–N bonds being elongated to 2.01 Å.
Polystyrene (PS) spin coated thin films were modified by O2 and Ar plasma as
well as by UV irradiation treatments. The modified PS samples were compared with
plasma polymerized and commercial polystyrene. The effects of plasma (O2 and Ar) and
UV irradiation treatments on the surface and the bulk properties of the polymer layers were
discussed. The surface properties were evaluated by X-ray Photoelectron Spectroscopy and
Contact angle measurements and the bulk properties were investigated by FTIR and
dielectric relaxation spectroscopy. As a result only one second treatment time was sufficient
to modify the surface. However, this study was also dedicated to understand the effect
of plasma and plasma irradiation on the deposited layers of plasma polymers. The
dielectric measurements showed that the plasma deposited films were not thermally stable
and underwent an undesired post-plasma chemical oxidation.
Poly(allyl alcohol) films with a thickness of about 150 nm were deposited by pulse plasma polymerization onto different substrates (inorganic and organic). The structure/property relationships of these samples were studied in dependence on the duty cycle (DC) of the plasma by a broad combination of different techniques and probes. For the first time volume sensitive methods (FTIR and dielectric spectroscopy) are combined with surface analytics by employing XPS for that system. FTIR spectroscopy gives qualitatively the same dependence of the concentration of the OH groups on DC like XPS.
The observed differences are discussed considering the different analytical depths of both the methods. The dielectric measurements show that the plasma deposited films are not thermally stable but undergo a post plasma chemical reaction during heating. The results obtained by dielectric spectroscopy are discussed in detail with the data from FTIR and XPS measurements.
Safe transport of cyanamide
(2009)
For many years cyanamide (CAS no. 420-04-2) was not commercially available due to its unstable nature. Since about 1965 the former "Süddeutsche Kalkstickstoffwerke AG" (current name: AlzChem Trostberg GmbH) developed a special stabilizing system. It was to be investigated to which Class (e.g. "Corrosive Substances", Class 8) or Division (e.g. "Self-reactive Substances", Division 4.1) of the International Regulations for the Transport of Dangerous Goods cyanamide (pure or as a 50% solution in water) should be assigned and based on this which maximum quantities are allowed to transport e.g. in tanks. Cyanamide is used for the synthesis of pharmaceutical and agrochemical actives, biocides, dyestuffs and fine chemicals.
During the last years cyanamide was tested at BAM and AQura. The results and an appraisal are presented in this paper. Thus, cyanamide should be classified according to the UN Recommendations on the Transport of Dangerous Goods in Class 8, UN number 2922 (50% solution in water) and UN number 2923 (pure substance) respectively, packaging group III, danger labels 8 + 6.1. Cyanamide, 50% solution in water, can be transported in portable tanks under specific conditions.
The morphology and thermal behaviour of polypropylenegraftmaleic anhydride (PPgMA) layered silicate (montmorillonite) nanocomposites were investigated using X-ray diffraction, transmission electron microscopy, differential scanning calorimetry and thermogravimetry. The study focuses on the influence of the presence of oxygen during the preparation of PPgMAnanocomposite using two different modified clays. The nanocomposites show tactoid, intercalated and exfoliated structures side by side with different dominant states depending on the clay used and on the processing conditions. The systems are described as multi-component blends rather than binary blends since the organic ions do not only change the mixing behaviour, but also influence material properties. Beside the physical barrier property of the clay layers also chemical processes were found to play an important role.