Filtern
Dokumenttyp
- Zeitschriftenartikel (4)
- Vortrag (4)
- Beitrag zu einem Tagungsband (1)
Sprache
- Englisch (9)
Referierte Publikation
- nein (9)
Schlagworte
- SRV (9) (entfernen)
Eingeladener Vortrag
- nein (4)
Hydraulic oils are well established formulations developed around the pump test. Requirements for energy efficiency and also environmentally acceptable properties increased the demand for development. In the same time, system pressure and the used of servo-hydraulic vanes increased bringing specific formulations and materials to their limit.
The vane pump is a key component in hydraulic systems and many other tribosystems in hydraulic circuits operate under different tribological operating conditions. The concept for ranking of hydraulic oils consists in using existing SRV-based ASTM test methods for evaluation of friction, wear and extreme pressure properties: D6425, friction and wear of oils (homologue to DIN 51834-2), D7421, extreme pressure properties of oils and D7755, wear volumes of ball and disks (homologue to DIN 51834-3. The tribological properties are assessed under the regime of mixed/boundary lubrication The SRV-based concept of tribological profile generates the wear volumes on two triboelements (specimen) and the extreme pressure properties as well as the evolution of friction in the wear and extreme pressure load step test. Thus, the benchmark and validation of hydraulic oils bear on a wider range of tribological properties. Round robin test results using the aforementioned testing concept will be shown. Another outcome is tribological set limits for inclusion in hydrau¬lic oil speci¬fications.
„Cliff“-testing by using SRV
The identification in engine or gear tests of the induction time or off-set point („cliff“), after which wear and friction increased.
“Cliff” testing as auxiliary method supports the interpretation of engine tests, as it enhances the values of expensive engine tests, because it enables correlations between friction & wear, either from engine or in SRV tests, with additive depletion, oxidation, viscometrics and dispersancy/detergency.
Oil samples taken in discrete intervals and “Cliff” tested monitors the evolution of tribological and functional properties versus engine running time. “Cliff” testing by using SRV is a purposeful tool in order to secure and accelerate metallurgical developments and the development of lubricant formulations.
Actions from the meeting in April 2016: 1. Four SAC test methods are in place and were revised: SH/T 0721 (Grease, coefficient of friction and wear), SH/T 0784 (Grease, pass load/O.K. load), SH/T 0847 (Oil, coefficient of friction and wear) and SH/T 0882 released by 11-2014 (Oil, pass load/O.K. load). 2. New test method to evaluate anti-fretting properties of greases based was approved by SAC TC280 and will be released. 3. SAC TC280 accepted the project “Simulation of synchronizer by using SRV”. Draft text to be submitted by 03-2017. Discussions on a parallel ASTM test method. 4. A procedure for “Wear Volume” is under development for SAC TC280.
Tribological profile of hydraulic oils by using SRV. The determination of a set of critical, tribological by using different SRV-based test methods. The SRV-based concept of tribological profile generates the wear volumes on two triboelements (specimen), the extreme pressure properties and friction under different contact pressures.
Thus, the benchmark and validation of hydraulic oils bear on a wider range of tribological properties.
The RR2016 extends with six hydraulic oils to other base oil types including biodegradable fluids, which were all tested according to ASTM D7043 in order to consolidate the correlation between SRV and V104C.
Original equipment manufacturers (OEMs) and end-users perceive 'Zero Wear' differently. The 'Zero Wear' approach will be put into a general relation for different applications and illuminated by individual paths, either based on monolithic materials, thin film coatings or alternative base oils, featuring triboactive materials and lubricious oxides for tribological engine components and dry running foil bearings or specific DLC, ta-C and novel Zirconium-based thin film coatings for concentrated contacts above FZG 14 and alternative engine oils (NoSAP & bio-no-tox). The associated tribometric test equipments for these examples will also be detailed.
Some of the properties intrinsically present in the backbone of polyalkylene glycols (PAGs), which have nowadays attracted the automotive original equipment manufacturers (OEMs), are presented, such as bio-no-tox properties, heat capacity, extended drains, low friction, low AlSi-liner wear, fuel economy, and very high viscosity indices, and are achieved with metal-, ash-, and polymer-free formulations, which guarantee no adverse contamination of the lambda sensor and the active centers of the catalyzer as well as not to increase the exhaust back pressure of the particulate filter through ash deposits. This paper illuminates the latest results from OEM's engine bench and road testing supporting the following functional benefits: (a) bio-no-tox, (b) improvements of fuel economy, even when compared with latest hydrocarbon-based prototype oils, (c) reduced wear, (d) reduced engine friction, (e) extended drains, (f) suited for bio-fuels, (g) no adverse effects on after-treatment devices through ash-, metal-, and polymer-free formulations, etc.
Testing friction and wear of the tribosystem piston ring and cylinder liner outside of engines
(2008)
An OEM-driven working group started in January 2004 to elaborate the philosophies, concepts and test procedures for testing piston ring and cylinder liner materials as well as engine oils outside of engines using the SRV (abbreviation for German: Schwingung, Reibung, Verschleiß; in English: Oscillation, Friction, Wear) test equipment. The different SRV test philosophies in use by OEMs are compiled. The working group focuses on (i) ASTM fuel economy sequence by ageing oils; (ii) friction and wear in the top-dead-centre region under mixed/boundary lubrication; (iii) extreme pressure load under mixed/boundary lubrication; and (iv) hydrodynamic friction. Tribological test results and precision data are presented.