Filtern
Erscheinungsjahr
- 2012 (2) (entfernen)
Dokumenttyp
Referierte Publikation
- ja (2)
Schlagworte
- Punktschweißverbindung (2) (entfernen)
For spot-welded joints, the resistance to
mechanical stress depends on the local strength properties
and gradients in the weld area. The commonly used
methods for investigating the stress–strain behaviour across
the weld area are connected with a high level of sample
preparation and with considerable limitations in local resolution.
A promising method for determining locally
resolved stress–strain curves is the instrumented indentation
test in connection with the method of representative
stress and strain (RS) and the method of artificial neural
networks (NNs). The stress–strain properties of the weld
nugget and the base metal determined by these two methods
are compared and discussed, additionally in relation to
the stress–strain curves obtained from the tensile test. The
measured Vickers hardness across the weld area is compared
with the evaluated local stress–strain properties.
Three steels used in automobile manufacturing are investigated:
mild steel DC04 and two advanced high-strength
steels (TRIP steel HCT690T and martensitic steel HDT
1200M). The results of the two methods (RS and NN) show
good correspondence for the base metal area but some
significant differences for the weld nugget. Comparing the
data across the weld area, no evidence of the presence of
residual stress (which would influence the results) was
found.
Die lokalen Festigkeiten im Bereich einer Schweißverbindung sind maßgebend für deren Widerstandsfähigkeit gegenüber mechanischen Beanspruchungen. Im Gegensatz zu anderen präparationsaufwendigen Methoden, z. B. die Untersuchung von Mikro-Zugproben, liefert die instrumentierte Eindringprüfung mit deutlich geringerem Aufwand Verläufe von Festigkeiten mit sehr guter Ortsauflösung. Im Rahmen dieser Arbeit werden wahre Spannungs-Dehnungskurven aus zyklischen Eindringversuchen mittels Auswertungen auf der Basis repräsentativer Spannungen und Dehnungen und auf der Basis neuronaler Netze an Punktschweißverbindungen aus hochfesten Stählen, jeweils im Bereich des Grundwerkstoffs und der Schweißlinse, bestimmt. Die Ergebnisse werden exemplarisch für einen Stahltyp mit Ergebnissen von Zugversuchen am Grundwerkstoff und am thermisch behandelten Werkstoff mit Schweißgut ähnlicher Struktur verglichen und diskutiert.