Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (3)
- Vortrag (3)
- Zeitschriftenartikel (1)
- Buchkapitel (1)
- Posterpräsentation (1)
Sprache
- Englisch (9) (entfernen)
Schlagworte
- DTBP (9) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Final report of research activities at BAM concerning large scale fireballs of organic peroxides (OP). New models for OP fireball diameter, duration, height and Surface Emmissive Power (SEP) are proposed and discussed based on a large number of large-scale and small-scale experiments using Di-tert-butylperoxide (DTBP) as a liquid OP and heptane as a liquid hydrocarbon fuel. Finally, CFD simulations are used to predict the fireball parameters: diameter, duration, height and SEP. Also the impact on the German storage regulations for organic peroxides are discussed.
Fireballs of liquid organic peroxides differ from those of liquid hydrocarbon fuels. Modified equations for predicting the fireball diameter, height, surface emissive power and the duration in dependence of the fuel mass are presented for di-tert-butyl peroxide. They base on 13 steel drum tests with fuel masses from 10 kg to 168 kg. Moreover, computational fluid dynamics simulations are performed using the laminar flamelet approach and a statistically turbulence treatment. Fireballs involving peroxide from 10 kg to 80 kg were simulated and their properties compared to the experimentally developed models. The deviations of each property are partially compensating each other leading to an adequate prediction of thermal safety distances for both, a time-independent and a time-averaged treatment. Simulations prove to be a good tool for predicting thermal radiation hazards of fireball scenarios.
Single and multiple fireballs of di-tert-butyl peroxide are numerically investigated using ANSYS CFX. Calculations contain varying inlet conditions, scale-adaptive shear stress turbulence modeling and one-step combustion reaction on a three-dimensional hexahedral mesh. Time-resolved flame temperatures, sizes and thermal radiation are compared to experimental results. There, fireballs were generated by fire engulfment of steel drums containing 200 l substance. After a vigorous burning, the remaining peroxide forms single and multiple fireballs involving 10 % to 20 % of the initial amount. The comparison of all simulations and two selected experiments show the special numerical treatment required for organic peroxides. Finally, the numerical predictions of irradiance in 30 m distance to the fire show a good agreement for both experiments. This proves the use of CFD as an appropriate method for thermal hazard assessment and the prediction of safety distances for organic peroxide fireballs.
To simulate a full fire engulfment during transportation or storage a closed removable head steel drum filled with 200 l Di-tert-butyl peroxide (DTBP) is subjected to a wood fire. Due to the enormous heat flux and the exothermic self-decomposition large flames arise and finally multiple fireballs occur. The fireballs consume up to 20 % of the total mass (20 % equals to 31 kg). They are characterized by high surface emissive power and large flames associated with high thermal radiation causing spontaneous ignition of objects in the surrounding. The measured sizes of the DTBP fireballs are smaller compared to the results of the general equations for hydrocarbon fireballs. Because these equations are recommended by the Health and Safety Executive (UK) to be applicable for organic peroxides explicit comparisons of DTBP with LPG, diesel and gasoline concerning the characteristics of fireballs are carried out. Also the burning time is compared and confirms a faster combustion of the peroxide. Moreover, the development of size and emissive power for DTBP and diesel fireballs are compared in a normalized graph. The results provide the assumption that new empirical models are required to be developed for hazard assessment of organic peroxide fireballs.
To simulate a full fire engulfment during transportation or storage a closed removable head steel drum filled with 200 l Di-tert-butyl peroxide (DTBP) is subjected to a wood fire. Due to the enormous heat flux and the exothermic self-decomposition large flames arise and finally multiple fireballs occur. The fireballs consume up to 20 % of the total mass (20 % equals to 31 kg). They are characterized by high surface emissive power and large flames associated with high thermal radiation causing spontaneous ignition of objects in the surrounding. The measured sizes of the DTBP fireballs are smaller compared to the results of the general equations for hydrocarbon fireballs. Because these equations are recommended by the Health and Safety Executive (UK) to be applicable for organic peroxides explicit comparisons of DTBP with LPG, diesel and gasoline concerning the characteristics of fireballs are carried out. Also the burning time is compared and confirms a faster combustion of the peroxide. Moreover, the development of size and emissive power for DTBP and diesel fireballs are compared in a normalized graph. The results provide the assumption that new empirical models are required to be developed for hazard assessment of organic peroxide fireballs.
Organic peroxides (OP) are thermally unstable and burn rapidly due to exothermic self-decomposition capabilities. Since fireballs can be formed under certain worst case conditions the understanding of burning phenomena and radiation characteristics need to be improved to prevent damage of humans and infrastructure. An appropriate method for real-scale Evaluation can be the use of CFD simulations with the objective of reducing time-consuming and costly outdoor experiments.
Fire and explosion hazards associated with storage and transportation of flammable materials have been a matter of great interest in the recent times. There are numerous studies on pool fires, BLEVEs and fireballs of hydrocarbon fuels, whereas BLEVEs and fireballs of organic peroxides (OP) are not investigated in detail yet. Fireball is a scenario that can occur when an OP filled drum is subjected to a surrounding fire. This presentation tries to extend the first investigations of OP BLEVEs presented on IGUS EOS Meeting 2015 in Ottawa. The following aspects are shown: Experimental investigation of a fired drum filled with 200 L DTBP; analyses of flame characteristics, e.g. temperatures, mass burning rates, SEP, thermal radiation properties and an overall comparison with DTBP pool fires; presentation of recommended safety distances.