Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (5)
- Zeitschriftenartikel (1)
- Dissertation (1)
- Vortrag (1)
Schlagworte
- Brillouin sensor (8) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
In this thesis, a distributed Brillouin sensor in perfluorinated polymer optical fibers utilizing BOFDA is presented. These commercially available polymer fibers offer beneficial characteristics for sensing applications such as higher break down strain up to 100 %, minimal bending radii below 2 mm, higher sensitivity to temperature and lower sensitivity to strain compared to their silica equivalent.
The chosen wavelength of operation at 1319 nm corresponds to lower fiber propagation loss (< 37 dB/km) compared to other approaches at 1550 nm (150 - 250 dB/km). A 86 m PFGI-POF was successfully measured by BOFDA with spatial resolution of 3.4 m.
The findings related to humidity influences can serve as a basis for future distributed humidity sensors not only limited to stimulated Brillouin backscattering.
Health monitoring of ground movement via highly sensitive fiber optic sensors allows operators to detect early potential or ongoing failures in critical geotechnical structures. Particularly, the fiber optic sensors can be embedded in geosynthetics which are nowadays widely used in many geotechnical applications including earth dikes, railway embankments, landfill liners, quarries and mines. Thereby, such smart geosynthetics can be used for reinforcement, layer separation, filtration or drainage while the embedded fiber optic sensors provide information about the condition of the geotechnical structures in real time. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. The presented measurement methods for long-term monitoring are based on Brillouin scattering in silica glass optical fibers (GOFs) and optical time domain reflectometry (OTDR) in polymer optical fibers (POFs).
Health monitoring of ground movement via highly sensitive fiber optic sensors allows operators to detect early potential or ongoing failures in critical geotechnical structures. Particularly, the fiber optic sensors can be embedded in geosynthetics which are nowadays widely used in many geotechnical applications including earth dikes, railway embankments, landfill liners, quarries and mines. Thereby, such smart geosynthetics can be used for reinforcement, layer separation, filtration or drainage while the embedded fiber optic sensors provide information about the condition of the geotechnical structures in real time. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. The presented measurement methods for long-term monitoring are based on Brillouin scattering in silica glass optical fibers (GOFs) and optical time domain reflectometry (OTDR) in polymer optical fibers (POFs).
We studied Brillouin gain spectrum characteristics in dispersion-shifted fibers having compound GeO2-doping compositions in the fiber core to realize simultaneous measurement of distributed strain and temperature. Due to various dopant concentration alongside the radius of tested nonzero dispersion-shifted fibers several multiple Brillouin scattering resonances were observed in the stimulated Brillouin spectra arose through backscattering on higher acoustic modes which propagated along the fiber axis. As a result of the varying acoustic velocities, the Brillouin resonance peaks featured different temperature coefficients which can be used to accomplish the simultaneous measurement of fiber strain and temperature. We presented our first measurement results for NZDS Fujikura and LEAF Corning fiber and discussed the superior sensory suitability of the former fiber types.
In comparison with traditional measuring Systems (pressure cells, piezometers and inclinometers which produce only point measurements) fibre optic sensors are well suited for spatiallydistributed monitoring purposes. The very tiny optical fibres of a diameter of less then 1 mm can operate as sensors in strong electromagnetic fields, under “harsh” explosive and Chemical environments and under ionizing radiation.
Distributed fiber optic sensors embedded in technical textiles for structural health monitoring
(2010)
Technical textiles with embedded distributed fiber optic sensors have been developed for the purposes of structural health monitoring in geotechnical and civil engineering. The distributed fiber optic sensors are based on Brillouin scattering in silica optical fibers and OTDR in polymer optical fibers. Such "smart" technical textiles can be used for reinforcement of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, structural health monitoring of critical geotechnical and civil infrastructures can be realized. The paper highlights the results achieved in this innovative field in the framework of several German and European projects.