Filtern
Erscheinungsjahr
- 2016 (4) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (4) (entfernen)
Sprache
- Englisch (4)
Schlagworte
- ASR (1)
- Alkali-silica-reaction (1)
- Cement paste (1)
- Concrete pavements (1)
- Concrete's porosity (1)
- Cyclic traffic loading and mechanical pre-damage (1)
- Durability (1)
- Mineral additions (1)
- Portland cement (1)
- Portland cement Initial hydration (1)
- Stabilizer (1)
- Sulphate-chloride attack (1)
- Superplasticizer (1)
- Synchrotron (1)
- XRD (1)
- end-of-life phase (1)
- masonry (1)
- sustainability (1)
A significant number of German concrete motorway pavements have shown damage only a few years after construction. The alkali-silica-reaction (ASR) is often one of the reasons for this damage. German guidelines and regulations focus on the optimisation of the concrete composition to avoid damage due to ASR. Moreover, diverse research projects have dealt with the development and optimisation of ASR performance test methods with and without external alkali supply. However, the influence of other parameters on the occurrence and intensity of a damaging ASR had not yet been taken into account. Such parameters include, e.g., insufficient curing and the modifications of concrete’s porosity due to the use of slip form pavers. Likewise, the increased traffic loading had not yet been considered. The Federal Institute for Materials Research and Testing (BAM) assesses these parameters and processes in a number of projects. These projects aim primarily to increase the durability of the concrete pavements, in particular by improving preventive measures that may be taken before or after the construction of concrete pavements. This paper gives a short overview of BAM’s projects concerning ASR in concrete pavements. Furthermore, results regarding the influence of the cyclic traffic loading on ASR are presented.
The exact mechanisms of the phase transitions caused by a combined sulphate-chloride attack are discussed controversially. The main points concern the mutual influences of sulphate and chloride ions during the secondary binding processes of these anions within cement hydrate phases. We simulated combined sulphate-chloride attack under laboratory conditions using solutions containing NaCl and Na2SO4 in different concentrations. Three sample compositions were used for the preparation of the specimens. In two of them, 30% of Portland cement was replaced by supplementary cementitious materials (fly ash, slag). The phase distribution in the samples was determined using synchrotron X-ray diffraction. The analysis with high spatial resolution allows the localisation of the secondary phase formation in the microstructural profile of the sample. A mechanism of the phase developments under combined sulphate-chloride attack is derived.
Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures
(2016)
Numerous admixtures are used in the building practice to customize the properties of the cement paste during application. The influences of admixtures on the course of cement hydration and formation of hydrate phases have to be considered. Polycarboxylate ether (PCE) based polymeric superplasticizers (SPs) are known to retard the setting of the cement paste. The extent of the retardation differs depending on the molecular structure of the SP. Additionally, the presence of a stabilizing agent (SA) in the cement paste has a retarding side effect on the setting. The initial cement hydration processes and the detailed mechanisms of the retardation influenced by PCEs, as well as their interactions with particular SAs, are insufficiently understood. Up to now, only the results of phenomenological studies were taken into account to describe this retardation process. A detailed structure analysis monitoring the change of the phase composition during the hydration was never applied. Both SP and SA affect the adsorption of the sulphate ions on the clinker particles, causing changes in the formation of ettringite during the initial hydration, and are therefore a crucial part of the setting process itself. Here, the initial hydration of cement influenced by the interaction of SP and SA was monitored in situ by synchrotron X-ray diffraction. The high time resolution of the measurements allowed a continuous detection of the hydrates formed. The hydration was followed from the starting point of water addition and for couple of hours afterwards. The hydration of the levitated cement pellets containing starch as SA was initialized by adding aqueous solutions of different commercial SPs. Changes in the ettringite formation were detected in comparison to the reference hydration of pure cement.
In Germany, a quantity of more than 10 million metric tons of masonry rubble is generated per year. With regard to a sustainable closed substance cycle waste management, these rest masses have to be recovered if possible. The end-of-life (EOL) phase of masonry includes the planning steps of demolition, processing and application. The choice of the most sustainable solution raises questions regarding material technology, plant engineering, economic efficiency and ecological issues. For this purpose, a methodological concept for a holistic assessment of the EOL phase of masonry is developed within the scope of a doctoral thesis. For the assessment the Cost-Effectiveness Analysis (CEA) is adapted. The assessment concept enables a holistic comparison of different EOL scenarios for masonry while integrating all planning steps. It combines Material Flow Analysis (MFA), Life Cycle Analysis (LCA), Life Cycle Working Environment (LCWE), economic evaluation methods and material testing. In future, various scenarios can be evaluated with regard to the goals of the European and German waste management industry.