Filtern
Dokumenttyp
- Posterpräsentation (38) (entfernen)
Referierte Publikation
- nein (38)
Schlagworte
- Dangerous Goods Database (14)
- Datenbank GEFAHRGUT (14)
- Gefahrgut (14)
- Database (12)
- Datenbank (12)
- Fachinformationssystem (12)
- Kennzeichnung (12)
- Umweltgefahr (12)
- Gefahrguttransport (11)
- BAM List (9)
Organisationseinheit der BAM
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (38) (entfernen)
Die BAM ist zuständige Behörde in Deutschland für bestimmte Aufgaben im Gefahrgutbereich, die u. a. in § 8 der Gefahrgutverordnung Straße, Eisenbahn und Binnenschifffahrt (GGVSEB) und § 12 der Gefahrgutverordnung See (GGVSee) aufgeführt sind und hauptsächlich von den Abteilungen 2 und 3 wahrgenommen werden. So ist die BAM bspw. die in Deutschland für die Zulassung von Verpackungen und Tanks oder auch die Einstufung bestimmter gefährlicher Güter zuständige Stelle. Die BAM arbeitet des Weiteren als Kompetenzbehörde national und international in den entsprechenden Gremien mit und berät das BMDV in der Rechtsfortentwicklung der internationalen Vorschriften für den Gefahrguttransport. Dies geschieht u. a. durch die Mitarbeit im Ständigen Ausschuss Gefahrgutbeförderung (AGGB) des Gefahrgut-Verkehrs-Beirats beim BMDV und den zugehörigen Arbeitsgruppen, oder auch das Erstellen von Anträgen für Rechtsänderungen in den internationalen Vorschriften der Vereinten Nationen (UN) bzw. der Wirtschaftskommission für Europa der UN (UNECE) im Auftrag des BMDV. Die Beratung der betroffenen Wirtschaft und die Normungsarbeit sind weitere wichtige Themen. Die Expertise der BAM wird insbesondere durch Forschung im Gefahrgutbereich erhalten und weiter ausgebaut. Im Rahmen des Vortrags werden drei Forschungsbereiche vorgestellt, von denen zwei für die Energiewende von großer Bedeutung sind.
Introduction
Lithium-ion batteries (LIBs) are one key technology to overcome the climate crisis and energy transition challenges. Demands of electric vehicles on higher capacity and power drives research on innovative cathode and anode materials. These high energy-density LIBs are operated at higher voltages, leading to increased electrolyte decay and the current collectors' degradation. Even though this fundamental corrosion process significantly affects battery performance, insufficient research is being done on the aluminum current collector. Fast and convenient analytical methods are needed for monitoring the aging processes in LIBs.
Methods
In this work glow-discharge optical emission spectrometry (GD-OES) was used for depth profile analysis of aged cathode material. The measurements were performed in pulsed radio frequency mode. Under soft and controlled plasma conditions, high-resolution local determination (in depth) of the elemental composition is possible. Scanning electron microscopy (SEM) combined with a focused ion beam (FIB) cutting and energy dispersive X-ray spectroscopy (EDX) was used to confirm GD-OES results and obtain additional information on elemental distribution.
Results
The aging of coin cells manufactured with different cathode materials (LCO, LMO, NMC111, NMC424, NMC532, NMC622, and NMC811) was studied. GD-OES depth profiling of new and aged cathode materials was performed. Quantitative analysis was possible through calibration with synthetic standards and correction by sputter rate. Different amounts of aluminum deposit on the cathode surface were found for different materials. The deposit has its origin in the corrosion of the aluminum current collector. The results are compatible with results from FIB-EDX. However, GD-OES is a faster and less laborious analytical method. Therefore, it will accelerate research on corrosion processes in high energy-density batteries.
Innovative aspects
- Quantitative depth profiling of cathode material
-Monitoring of corrosion processes in high energy-density lithium-ion batteries
- Systematic investigation of the influence of different cathode materials
Next to performance features, safety aspects of lithium-ion batteries (LIBs) are a crucial research field. The abuse/misuse of a LIB can trigger a chain of exothermic reactions on cell level. Hence, the cell temperature increases dramatically, causing the so-called thermal runaway (TR). Moreover, the TR of one cell can initiate the TR of adjacent cells leading to a TR-propagation. Due to the risk of a TR, special measures need to be applied while handling, storing, and transporting batteries. According to current transport regulations, all different types of lithium-ion and lithium metal cells/batteries (by means of cell format, cathode chemistry, etc.) require the same transport conditions regardless of the intensity of their reaction during abuse tests. To allow more differentiated transport requirements, the United Nations (UN) Subcommittee Transport of Dangerous Goods created an Informal Working Group (IWG) on the topic of a hazard-based classification of LIBs. BAM is one of nine laboratories working on the development of a respective classification scheme including appendant test protocols.
Herein, we discuss the latest results of our safety tests on commercial LIB-cells employing the test protocols developed in the UN-IWG. Single cell tests are analysed regarding different hazardous features during the TR, e.g., cell temperature, flame occurrence, and gas amount. Next to the general occurrence of a propagation, the propagation speed is analysed by propagation tests. In total, the presented results are gathered from over 200 tests. Next to the classification of the tested cells, the data set obtained is analysed in respect to the cells’ key features, such as cell energy, state of charge and cathode type. Generally, the presented results can increase the overall understanding of the TR-mechanism supporting the design of advanced safety measures on cell level in the future.