Filtern
Erscheinungsjahr
- 2020 (4) (entfernen)
Dokumenttyp
- Vortrag (2)
- Zeitschriftenartikel (1)
- Beitrag zu einem Tagungsband (1)
Sprache
- Englisch (4) (entfernen)
Schlagworte
- Ignition source (2)
- Carbon dioxide (1)
- Exploding Wire (1)
- Explosion Limits (1)
- Explosion Protection (1)
- Explosion limits (1)
- Freeze-dryer (1)
- Hybrid mixtures (1)
- Ignition Source (1)
- Ignition energy (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (2)
For the determination of safety characteristics of gases, vapors and dusts different types of ignition sources are used in international standards and guidelines. Table 1 compares technical relevant ignition sources with their main features. The paper presents test results of a comparative calorimetric and visual study between four different types of ignition sources. The ignition procedures were analyzed visually with a high-speed camera and electric recordings. In addition to that, the influence of the electrode-orientation, -distance as well as ignition energy on the reproducibility of the exploding wire igniter was tested.
The exploding wire is already in use for standardized determination of safety characteristics of gases, first tests on the suitability of the exploding wire igniter for dust testing have been carried out by Scheid et al. Using the exploding wire, the ignition energy can be varied from 2 to 10 000 J (2 x 5 000 J) and thus it could be used for gases, vapors, dusts and hybrid mixtures. Moreover it can be used at high initial pressures and it is the only ignition source with an easily measurable ignition energy release. Furthermore, it does not introduce another chemical reaction into the system.
Finally, a proposal for a standard ignition source for explosion tests on hybrid mixtures is derived from the test results.
Hydrogen differs from most other flammable gases regarding the safety related properties. Mainly the minimum ignition energy (MIE) is particularly low and the burning velocity is particularly high. Hydrogen mixtures are formed in different hydrogen applications, for example if hydrogen is added to the existing natural gas grid, if synthetic gas (mixture of CO and H2) is produced or in biogas plants. Safety related properties of hydrogen mixtures were determined experimentally and are presented in this presentation. Moreover the accuracy of estimation methods for safety related properties of hydrogen mixtures is evaluated.”
The EU F-Gas Regulation grants exceptions from the GWP-related placing on the market prohibition for stationary refrigeration equipment for applications below -50 °C. Nonetheless, non-flammable refrigerants, which can be used for that temperature range, become increasingly expensive and rare inside the EU due to the phase down of HFCs under the regulation. Flammable alternatives based on methane, ethane and ethylene are available, but are not viable for all applications due to their flammability. Carbon dioxide cannot be used for applications below -50 °C due to CO 2 ’s triple point at -56 °C. Nitrous oxide with a triple point at -92 °C seems to be an alternative. However, possible exothermal decomposition of N 2 O calls for additional measures in order to be able to operate such systems safely. Two low-temperature systems have been developed, built and successfully operated at evaporation temperatures down to - 80 °C with mixtures of N 2 O and CO 2 and different lubricants at ILK and Karlsruhe University of Applied Sciences. The units achieved similar energy efficiency as the standard HFC-equipment used for freeze drying. Possible decomposition of N 2 O could successfully be supressed by various measures.