Filtern
Dokumenttyp
- Posterpräsentation (6)
- Vortrag (5)
- Zeitschriftenartikel (4)
- Dissertation (1)
Schlagworte
- Surface click chemistry (2)
- XANES (2)
- (HAX)PES (1)
- 1,2,3-Triazole (1)
- AES (1)
- Azide (1)
- Bibliothek ternärer Pd-Legierungen (1)
- Density functional theory (1)
- ED-EPMA (1)
- Elemental composition (1)
Eingeladener Vortrag
- nein (5)
The discovery and design of high performance Pd-alloys is of great interest for the use of hydrogen as a future energy carrier. Therefore hydrogen has to be detected, separated from other gases and stored. In this respect this thesis presents the combinatorial synthesis and characterization of the ternary Pd-Ni-Co alloy System over a wide composition range based on so-called thin film alloy libraries. Those libraries are model systems to characterize a large number of alloy compositions at the same time. The sputter-deposition process is optimized for the gradient of the Pd concentration on the surface of the alloy library by the use of electron-excited Auger electron spectroscopy. The scientific goal of this work is the experimental Investigation of adsorbate-induced surface segregation phenomena on alloy libraries.
The surface and bulk compositions of an alloy library are studied after deposition, H2 exposure and H2S poisoning. The co-segregation of Ni and Co to the surface is observed. The segregation process is influenced by the oxidation of Ni and Co due to the contact with ambient air, by H2 and by H2S poisoning. Also at very high Pd concentrations in the range of 87 at.% to 97 at.%, which is interesting for the detection of very low H2-Concentrations in air, the co-segregation of Ni and Co takes place. The poisoning effects were investigated in detail on a pre-selected Pd-Ni-Co alloy by photoelectron spectroscopy (XPS, HAXPES) in addition to AES and EDX. The composition profile of the alloy on the nm scale is acquired and the surface and bulk chemistry is discussed before and after poisoning. The composition of the alloy only changed within the first 3 nm due to H2S exposure. In the ternary Pd-Ni-Co alloy system Pd is present in its metallic state, while Ni and Co show several oxidation states. The presented concepts of ternary alloy development pave the way for the systematic synthesis and characterization of new ternary transition metal alloy systems.
A new high throughput screening method to characterise alloys used as gate metal of Metal/solid Electrolyte/Insulator/Semiconductor (MEIS) gas-sensors was developed. Samples with continuous gradients in alloy concentration for the system Pd1-x-yNiyCoy were analysed regarding H2 sensitivity. First results showed reduced poisoning effects of H2S for Ni concentrations between 4-11 at-% in Pd.
Experimental N K-edge NEXAFS data of surface immobilized azide, 1,2,3-triazole and terpyridyl groups are interpreted with the help of DFT spectrum simulations. Assignments of π* resonances in experimental N K-edge NEXAFS spectra to nitrogen atoms within these functional groups have been made. The azide was immobilized on gold as the head group of a thiol SAM, 1,2,3-triazole was formed on this SAM by click reaction and terpyridyl groups were introduced as substituents of the acetylene used for the click reaction. For azide-terminated molecules, DFT spectrum simulations are found to be useful to find measurement conditions delivering experimental N K-edge NEXAFS data with negligible X-ray damage. The 1,2,3-triazole group is found to be rather stable under X-ray irradiation.
Characterization of Pd-Ni-Co alloy thin films by ED-EPMA with application of the STRATAGEM software
(2012)
Ternary thin film alloys based on Pd, Ni and Co on silicon wafers have been characterized in order to determine elemental composition and thickness. A broad variety of alloy compositions was obtained on one and the same substrate by magnetron dc-co-sputter deposition. Energy-dispersive electron probe X-ray microanalysis of these 'multi' alloy composition samples is performed in a non-destructive, precise and, if optimized, also in a time-saving way. The local thickness of the layers under study was in between 50 nm and 250 nm. Pure element bulk materials have been employed as reference specimens. The results attained in this study are compared to those obtained by other analytical methods as Auger electron spectroscopy and X-ray photo electron spectroscopy.