Filtern
Dokumenttyp
- Posterpräsentation (5)
- Vortrag (4)
- Zeitschriftenartikel (3)
Schlagworte
- Arsenic species (1)
- Arsenolipids (1)
- ESI-MS/MS (1)
- Elemental analysis (1)
- Fish (1)
- Herring (1)
- ICP-TOF-MS (1)
- Material analysis (1)
- Materialanalyse (1)
- Röntgenfluoreszenzspektrometrie (1)
Eingeladener Vortrag
- nein (4)
Arsenolipids represent a relevant step in the biosynthesis of organoarsenicals from inorganic arsenic compounds. Their fate after human consumption is still uncertain.
By means of a HPLC-ICP-MS/ESI-Q-TOF-MS method, 16 lipid soluble arsenic compounds, including seven formerly unknown organoarsenicals, have been identified in commercial herring fillet.
The structural assignment was done by exact mass and high resolution MS/MS data. This is the first identification of arsenolipids in herring (Clupea harengus). They contribute with (3.6±0.2) mg kg-1 arsenic to 62.3% of the total arsenic content of (5.7±0.3) mg of arsenic per kg dry mass. Current studies indicate that a metabolization by humans to cancerous dimethylarsinic acid is very likely. The presented results are highly relevant as herring is a very popular food fish species in Europe. Moreover, the screening of different fish species revealed that arsenolipids are more widespread than previously assumed.
Elementanalyse mit Röntgenfluoreszenzspektrometrie direkt am Materialstrom in Produktionsprozessen gewinnt zunehmend an Bedeutung. Die Röntgenfluoreszenzspektrometrie kann aufgrund der technischen Entwicklung mittlerweile ohne aufwändige Probenvorbereitung als aussagekräftige Informationsquelle für Stoffparameter im industriellen Prozess eingesetzt werden. Der Einsatz von online Röntgenfluoreszenzanalyse zahlt sich sowohl finanziell als auch zeitlich schnell aus, da sie sowohl für den ökonomischen Einsatz von Rohmaterialien, als auch z. B. im Materialrecycling zu gebrauchen ist. In diesem Beitrag werden vier unterschiedliche Einsatzmöglichkeiten beschrieben.
A new setup for fast spatially resolved measurements of elemental trace amounts under total reflection conditions using a new colour X-ray camera is described. Samples prepared on conventional total reflection X-ray fluorescence (TXRF) reflectors were measured at BESSY II synchrotron. A spatial resolution of 50 × 50 µm² was obtained, while the required time for the investigation of a 10 × 10 mm² sample is 30 seconds. The set-up is up to 350 times faster than conventional X-ray fluorescence systems for elemental traces. The major components of the X-ray camera are polycapillary optics and a pn-CCD chip with an active area of 13 × 13 mm². This area is divided into 264 × 264 pixels of 48 × 48 µm². A full X-ray spectrum with a resolution of 152 eV @ 5.9 keV and a chip temperature of 246 K is recorded for each pixel. The chip has a read-out rate of 400 Hz.