Filtern
Dokumenttyp
- Vortrag (5)
- Beitrag zu einem Tagungsband (3)
- Zeitschriftenartikel (1)
- Sonstiges (1)
Schlagworte
- Konrad (4)
- Radioactive waste container (3)
- Endlager Konrad (2)
- Al-TM-RE (1)
- Aluminum alloy (1)
- Bauartprüfung (1)
- Cold rolling (1)
- Crystallization (1)
- Endlagerbehälter (1)
- ISO 1496-1 (1)
Eingeladener Vortrag
- nein (5)
Low and intermediate level radio active waste has been produced in Germany for several decades. While a part of the waste had been deposited in the Morleben repository and the Asse mine which have been operated for just a limited period of time, the major amount is conditioned and packaged in temporarily stored waste containers.
Those containers are designated for final disposal in the KONRAD repository being currently under construction and expected to start operation in 2022. As a consequence, an assessment of the waste container documentation and safety is strongly needed to receive an approval for the KONRAD repository. This requalification is challenging because those old containers have to meet the same safety requirements as new containers.
Federal approval of legacy waste containers for the Konrad repository - strategies and challenges
(2016)
The approval of an increasing number of legacy waste containers for the Konrad re-pository is expected in the next years. While well documented young legacy waste containers can rather easily be approved, the assessment is challenging for contain-ers which were manufactured some decades ago. All parties have to work closely together to find a specifically fitted strategy for such approvals. Thereby, rework of documents and requalification can be a promising approach. Details about three basic strategies have been shown to give a hint which options are available.
Federal approval of legacy waste containers for the Konrad repository - strategies and challenges
(2016)
The approval of an increasing number of legacy waste containers for the Konrad re-pository is expected in the next years. While well documented young legacy waste containers can rather easily be approved, the assessment is challenging for contain-ers which were manufactured some decades ago. All parties have to work closely together to find a specifically fitted strategy for such approvals.
Thereby, rework of documents and requalification can be a promising approach. Details about three basic strategies have been shown to give a hint which options are available.
Low and intermediate level radioactive waste has been produced in Germany for several decades. While a part of the waste had been deposited in the Morleben repository and the Asse mine which have been operated for just a limited period of time, the major amount is conditioned and packaged in temporarily stored waste containers. Those containers are designated for final disposal in the KON-RAD repository being currently under construction and expected to start opera-tion in 2022. As a consequence, an assessment of the waste container documen-tation and safety is strongly needed to receive an approval for the Konrad reposi-tory. This requalification is challenging because those old containers have to meet the same safety requirements as new containers.
Abfallgebinde, die im Endlager Konrad eingelagert werden sollen, müssen die Anforderungen und Kriterien erfüllen, die in den Endlagerungsbedingungen (SE-IB-29/08-Rev-1) und in der Produktkontrolle (SE-IB-30/08-Rev-1) festgelegt sind. Die Qualifizierung der Abfallbehälter erfolgt auf dieser Grundlage in Form von Bauartprüfungen, die von der Bundesanstalt für Materialforschung und -prüfung (BAM) im Auftrag des Bundesamtes für Strahlen-schutz (BfS) durchgeführt werden. Darüber hinaus sind die im Hinblick auf Behälterbauartprüfungen relevanten Nebenbestimmungen aus dem Planfeststellungsbeschluss für das Endlager Konrad zu berücksichtigen. Zur besseren Anwendbarkeit werden diese Nebenbestimmungen in die Endlagerungsbedingungen und die Pro-duktkontrolle eingearbeitet. Begleitend ist als Hilfestellung für die Abfallablieferer und Behälterhersteller ein Leit-faden geplant, der praktikable Nachweisstrategien aufzeigt und, soweit erforderlich, Hintergrundinformationen zu den Spezifikationen der Regelwerke liefert. Die BAM ist vom BfS beauftragt, hierfür Vorschläge zu entwickeln und Empfehlungen abzugeben.
Texture formation in amorphous Al86Ni6Y4.5La1.5Co2 splats by thermal and mechanical treatment
(2016)
The crystallization behavior of amorphous Al86Ni6Y4.5La1.5Co2 splats was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Rietveld refinement was used to analyze the preferred orientation of fcc aluminum nanocrystals in the residual amorphous matrix after annealing. Fiber textures in [200] and [220] directions were found after heating to 360 C. The influence of cold rolling on the preferred crystal orientation was studied as a function of the thickness reduction of the specimen. It was found that cold rolling significantly increases the (220) texture, while the (200) texture remains unchanged. Based on the experimental results the formation of (220) and (200) texture during the crystallization of the amorphous splats was ascribed to two different processes, internal stresses induced during splat formation or cold-rolling.
Abfallgebinde, die im Endlager Konrad eingelagert werden sollen, müssen die Anforderungen und Kriterien erfüllen, die in den Endlagerungsbedingungen (SE-IB-29/08-Rev-1 [1]) und in der Produktkontrolle (SE-IB-30/08-Rev-1) festgelegt sind. Die Qualifizierung der Abfallbehälter erfolgt auf dieser Grundlage in Form von Bauartprüfungen, die von der Bundesanstalt für Materialforschung und -prüfung (BAM) im Auftrag des Bundesamtes für Strahlenschutz (BfS) durchgeführt werden. Darüber hinaus sind die im Hinblick auf Behälterbauartprüfungen relevanten Nebenbestimmungen aus dem Planfeststellungsbeschluss für das Endlager Konrad zu berücksichtigen. Zur besseren Anwendbarkeit werden diese Nebenbestimmungen in die Endlagerungsbedingungen und die Produktkontrolle eingearbeitet. Begleitend ist als Hilfestellung für die Abfallablieferer und Behälterhersteller ein Leitfaden geplant, der praktikable Nachweisstrategien aufzeigt und, soweit erforderlich, Hintergrundinformationen zu den Spezifikationen der Regelwerke liefert. Die BAM ist vom BfS beauftragt, hierfür Vorschläge zu entwickeln und Empfehlungen abzugeben.