Filtern
Dokumenttyp
- Vortrag (8) (entfernen)
Referierte Publikation
- nein (8) (entfernen)
Schlagworte
- Regulations (8) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (8)
Conventional approval requirements exclusively ask for minimum strength values, which have to be met. The probabilistic approach estimates how likely none of the comparatively manufactured units fails during operation.
Both questions are juxtaposed and compared here with respect to the load cycle tests. The influence of the sample sizes is discussed additionally.
Existing regulations and standards for the approval of composite cylinders in hydrogen service are currently based on deterministic criteria (ISO 11119-3, UN GTR No. 13). This paper provides a systematic analysis of the load cycle properties resulting from these regulations and standards. Their characteristics are compared with the probabilistic approach of the BAM. Based on Monte-Carlo simulations the available design range of all concepts is compared. In addition, the probability of acceptance for potentially unsafe design types is determined.
This presentation provides general data about BAM, the structure of department 3 and a short impression of the application of pressure vessels for hydrogen in stationary use, supply chain and onboard storage.
It guides to the actions of BAM as competent authority on this area and shows a lot different methods for testing operated at BAM. Based on this additional research has been detected as necessary for a competent tackling of the tasks as competent authority. After having mentioned several important research projects a figure is presented that compares the development of regulations with relevant re-actions of BAM. The outcome was a concept of a risk based definition of accepted failure rates in combination with probability-oriented safety assessment over entire service life.
The second aspect raised at INERIS is the issue of advising the BMVI concerning pressure vessels for hydrogen. Since the pressure is high for saving material consumption and weight there is still high interest in changing regulatory requirements. Therefor we developed an approach for the display of minimum requirements of regulations in diagrams (sample performance charts; SPC) and the probabilistic analysis for these deterministic requirements. This is done by Monte-Carlo simulation and the analysis of acceptance rate and survival rate of basic populations all over the SPC.
This finally provide same knowledge of non-approvable but safe ranges of parameters and even approvable but non-safe constellations. In addition, this analysis allows to optimise deterministic requirements in regulations to the intended level of safety for approved populations of pressure vessels, which is shown on the example of the GTR#13.
An approach to achieve “zero leakage” is discussed with respect to the experience in Germany, where strict regulations for landfill lining and capping systems have been developed and issued because of large environmental problems related to landfills that accumulated in the 1970’s and 1980’s. These regulations for landfills and geosynthetics which are used in landfill liner and capping systems are shortly described. The main certification requirements for the products as well as conclusions for their use are presented. Using a thick, high quality HDPE geomembrane (GMB), which is installed free of residual waves and wrinkles in intimate contact with a compacted clay liner (CCL) or geosynthetic clay liner (GCL) of very low permeability, by a qualified, experienced, well equipped and properly third‐party controlled installer and which are protected by heavy protection layers designed with respect to long‐term performance of the GMB, may result in a liner or capping system of practically no leakage. This is demonstrated by analyzing results of measurements obtained from permanently installed leak detection systems in combination with HDPE GMBs.
This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, etc. Safety in hydrogen technologies is governed by international and European regulations and standards. An overview on regulatory bodies, technical committees, regulations, directives, standards, and technical guidelines with special attention on the BAM-GGR 021 is given in this lecture.
This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, etc. Safety in hydrogen technologies is governed by international and European regulations and standards. An overview on regulatory bodies, technical committees, regulations, directives, standards, and technical guidelines with special attention on the BAM-GGR 021 is given in this lecture.