Filtern
Dokumenttyp
- Vortrag (13) (entfernen)
Referierte Publikation
- nein (13) (entfernen)
Schlagworte
- Impact (13) (entfernen)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (8)
- 3 Gefahrgutumschließungen; Energiespeicher (5)
- 3.5 Sicherheit von Gasspeichern (5)
- 8.0 Abteilungsleitung und andere (5)
- 3.3 Sicherheit von Transportbehältern (4)
- 7 Bauwerkssicherheit (3)
- 7.2 Ingenieurbau (3)
- 8.5 Röntgenbildgebung (2)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (1)
Eingeladener Vortrag
- nein (13)
The presentation gives an overview about mechanical and thermal testing of packages and containers for radioactive material in Germany. The test facilities of BAM and the main measurement methods are described followed by testing of containers (prototype, full-scale, reduced scale) as well as components and specimens.
In this work an approach for smoothing the oscillations of normal contact is presented. On the other side a higher order time discretization scheme in association with a higher order spatial discretization, like the spectral element method, is used. The contact constraints are reformulated in order to get an explicit equation for the motion.
In this work an approach for smoothing the oscillations of normal impact is presented. In addition, a higher order time discretization scheme in association with a higher order spatial discretization, like the spectral element method, is investigated regarding its convergence rates.
Quantification of impact damages in CFRP and GFRP structures with thermography and ultrasonics
(2018)
For the quantification of impact damage in CFRP and GFRP structures, first passive thermography measurements have been performed at the front and rear side of the test specimens during low velocity impact load. After loading, the damaged structures have been investigated non-destructively with active thermography with flash excitation and with step heating and with two different ultrasonic methods (phased array and air coupled ultrasonics). The damage sizes quantified with all methods are evaluated and compared. In addition, the depth of the greatest damage inside the different test specimens is analysed.
Within the presented research project, experimental and numerical investigations were performed to develop a thin-shelled, modular, mobile element system made of a micro-reinforced ultra-high-performance ductile concrete (DUCON®). Material parameters were experimentally determined to adapt the material model within the numerical analysis applying the Drucker-Prager relationship. Afterwards, for validation of the numerical models, quasi-static and high-velocity impact tests were performed on plate-like structures. Finally, a suitable geometry of transportable barrier elements will be designed, which provides a maximum of resistance against impact by a minimum of weight and a maximum of mobility.
Reinforced concrete (RC) is used as structural material in most diverse civil engineering applications. For the variability of its physical properties it is still an engineering challenge to meet all necessary requirements for the prediction of dynamic effects under impact loading. In this paper, investigations are shown within the scope of quantifying and evaluating the damage caused by an impact. The experimental investigations are performed in the field of low- and medium-velocity impact. The chosen flat nose shape results in small penetrations on the top side and scabbing on the bottom side. The plate is scanned with an adapted planar tomographic examination after the impact, and the damage is analysed, afterwards. Cracks and spalling are made visible with a reconstruction. The numerical model validated on the tomographic results justifies the application for further predictions of the damage description.
Due to the many possible applications, the uncomplicated production and the high application range, reinforced concrete is a widely used building material. This large range of physical material properties still poses an engineering challenge in determining all necessary requirements for predicting dynamic effects under impact load.
Many aspects of impact have already been examined and some correlations have been studied intensively. Examples are the work of Lastunen and Booker, who studied the influence of projectile properties on the impact form. Li has also investigated the local effects of an impact. The field of detailed damage analysis has not been in focus so far.
This presentation shows some studies in medium-velocity impact with the focus on post-impact damage evaluation. The impactor is modified so that the test plates show low penetration on the top and scabbing on the bottom. With the unique tomography lab test stand at BAM the plate is scanned after the impact and the damage is analyzed. Cracks and scabbing are made visible with a reconstruction. The comparison of simulation and tomography allows to create prognosis models for damage characterization.
Hochbeanspruchte Bauteile wie Druckbehälter bergen im Falle eines Versagens ein erhebliches Gefährdungspotential für Mensch und Umgebung. Trotz der Auslegung mit hohen Sicherheitsfaktoren kommt es durch die hauptsächlich bei mobilen Anwendungen eingesetzten Leichtbauwerkstoffe und Materialkombinationen zu komplexen Degradationsvorgängen, welche unter ungünstigen Umständen zu einem frühzeitigen Versagen führen können. Am Beispiel eines hybriden Typ III-Behälters, bestehend aus Metall und Faser-Verbund-Kunststoffen, wird demonstriert, wie sich Änderungen des lebensdauerbestimmenden Eigenspannungszustandes auf eine sichere Gebrauchsdauer auswirken. Zur Erfassung dieser Eigenspannungsänderungen wird ein zerstörungsfreier Ansatz auf Grundlage einer experimentellen Modalanalyse vorgestellt. Die daraus gewonnen Daten fließen unmittelbar in ein erarbeitetes Betriebsfestigkeitsmodell ein. Abschließend werden die generierten Modellergebnisse mit experimentell ermittelten Lebensdauern verglichen und bewertet.