Filtern
Dokumenttyp
- Vortrag (3) (entfernen)
Sprache
- Englisch (3)
Referierte Publikation
- nein (3) (entfernen)
Schlagworte
- Ammonium nitrate (3) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
2015 Tianjin explosions
(2016)
In 2015 a series of explosions occurred at a container storage station at the Port of Tianjin, China, on Wednesday, 12 August 2015, that killed over one hundred people and injured hundreds of firemen and others. The first two explosions happened within 30 seconds of each other at the facility. The second explosion was larger and involved the detonation of about 800 tons of ammonium nitrate. The cause of the explosions was not known at first, but an investigation of the Chinese authorities concluded in February 2016 that an overheated container of dry nitrocellulose was the cause of the initial explosion. Colleagues of the Nanjing University of Science and Technology and BAM worked together to analyze the reasons and the process of that incident based on knowledge about the properties of the involved substances, particularly ammonium nitrate and nitrocellulose, and potential mechanism of initiation and propagation.
2015 Tianjin Explosions
(2016)
In 2015 a series of explosions occurred at a container storage station at the Port of Tianjin, China, on Wednesday, 12 August 2015, that killed over one hundred people and injured hundreds of firemen and others. The first two explosions happened within 30 seconds of each other at the facility. The second explosion was larger and involved the detonation of about 800 tons of ammonium nitrate. The cause of the explosions was not known at first, but an investigation of the Chinese authorities concluded in February 2016 that an overheated container of dry nitrocellulose was the cause of the initial explosion. Colleagues of the Nanjing University of Science and Technology and BAM worked together to analyze the reasons and the process of that incident based on knowledge about the properties of the involved substances, particularly ammonium nitrate and nitrocellulose, and potential mechanism of initiation and propagation.
Ammonium nitrate (AN) prills are commonly used as an ingredient in industrial explosives and in fertilisers. Conventional techniques (such as BET or mercury intrusion porosimetry) can measure the open porosity and specific surface area of AN prill, but the closed porosity is not obtainable. This work was focused on evaluating X-ray computed tomography (XCT) as a non-destructive technique for the assessment of porosity in AN prills. An advanced data processing workflow was developed so that the segmentation and quantification of the CT data could be performed on the entire 3D volume, yet allowing the measurements (e.g.; volume, area, shape factor…) to be extracted for each individual phase (prill, open porosity, closed porosity) of each individual prill, in order to obtain statistically relevant data. Clear morphological and structural differences were seen and quantified between fertiliser and explosive products. Overall, CT can provide a very wide range of parameters that are not accessible to other techniques, destructive or non-destructive, and thus offers new insights and complementary information.