Filtern
Erscheinungsjahr
- 2015 (4) (entfernen)
Dokumenttyp
- Beitrag zu einem Tagungsband (4) (entfernen)
Sprache
- Englisch (4)
Referierte Publikation
- nein (4)
Schlagworte
- Cobalt (1)
- Cutting (1)
- Fe3Al (1)
- Hardmetals (1)
- High contact pressure (1)
- Metal matrix composite (1)
- Milling (1)
- Molybdenum (1)
- NbC (1)
- Niobium carbide (1)
Thc tribological behavior under dry sliding of a Fe3Al-NbC composite prepared by pyrometallurgical synthesis is compared to NbC-based hard metals bonded by cobalt or Fe3Al. The dry sliding wear resistance (0,1-7/10 m/s) of the present Fe3Al-NbC with 60% NbC was close to those known of NbC-based hard metals. No grain pull-outs or fragmentations of the NbC grains were seen in the wear tracks, as a metallurgical interphase was formed between matrix and NbC grains.
The tribological behavior under dry sliding of a Fe3Al-NbC composite prepared by pyro-metallurgical synthesis is compared to different SPS sintered NbC-based hardmetals bonded by cobalt or Fe3AI. The dry sliding wear resistance (0. 1-7 /10 m/s) of the present Fe3Al-NbC with -60 % NbC was close to those known ofNbC-based hard metals. No grain pull-outs or fragmentations of the NbC grains were seen in the wear tracks of the Fe3Al-NbC composite, as a metallurgical interphase was formed between matrix and NbC grains. The physical prope1ties of melt grown NbC match those known from powder metallurgically sintered NbC using powders converted from Nb205.
In this present study, the mechanical properties (strength, hardness, moduli) and the dry sliding properties of stoichiometric and sub-stoichiometric NbC were compared. Microhardness and elastic properties of NbC depend from the C/Nb ratio, because the binary phase diagram Nb-C shows a region of homogeneity of NbCx of 0,72≤ x ≤1.0. At RT, hard metals of stoichiometric NbC have an elastic modulus E of ~440 GPa, those of substochiometric NbC0,88 an E of 405 GPa. The hot hardness of sub-stoichiometric NbC is above 600°C higher than of WC. The dry sliding wear resistance (0,1-7/10 m/s) of the present Fe3Al-NbC0,94 with ~61 vol.-% NbC as hard phase was close to those known of NbC-based hard metals. No grain pull-outs or fragmentations of the NbC grains were seen in the wear tracks of the Fe3Al-NbC composite (MMC), as a metallurgical interphase was formed between matrix and NbC grains. Stoichiometric and sub-stoichiometric niobium carbides have at RT and 400°C under dry sliding a prone intrinsic wear resistance more or less independent from sliding speed, either as hardmetal or as hard phase in metal matrix composite, associated with an exceptional high load carrying capacity.
The approaching CO2 targets have now enforced automotive OEMs to engage R&D efforts also in powertrain to reduce friction, increase lifetime properties, and load carrying capacities of running systems. Martensitic steels such as 36NiCrMoV1-5-7 have a great potential to be used in automotive powertrain applications due to its favorable mechanical properties. In order to realize lightweight strategies, it is essential that steels with improved fracture toughness values and higher annealing temperatures with regard to higher contact pressures and possible thin film coating application be considered. State-of-the-art steels, like 16MnCr5, 21NiCrMo, 30CrMoV9, and 100Cr6 are not able to sustain a further increase in torque or load during operating time as well as annealing effects under higher oil or deposition temperatures. Therefore, the recent research on the slip-rolling resistance, frictional, and wear behavior of steels such as 36NiCrMoV1-5-7, Cronidur 30 (AMS 5898), 20MnCr5 (SAE 4820 or 5120), and 100Cr6H (SAE E52100) showed that possible lean alloying concept alternatives with promising performance characteristics are already available.