Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (301)
- Beitrag zu einem Tagungsband (171)
- Vortrag (64)
- Beitrag zu einem Sammelband (24)
- Forschungsbericht (13)
- Buchkapitel (3)
- Tagungsband (Herausgeberschaft für den kompletten Band) (1)
- Posterpräsentation (1)
- Forschungsdatensatz (1)
Sprache
- Englisch (420)
- Deutsch (143)
- Russisch (11)
- Mehrsprachig (2)
- Italienisch (1)
- Serbisch (1)
- Chinesisch (1)
Schlagworte
- Laser beam welding (98)
- Welding simulation (26)
- Resistance spot welding (22)
- Solidification cracking (22)
- Laser metal deposition (21)
- Additive manufacturing (20)
- Laser welding (20)
- Laserstrahlschweißen (16)
- Mechanical properties (16)
- Microstructure (16)
- Numerical simulation (16)
- Electromagnetic weld pool support (13)
- Additive Manufacturing (11)
- Inconel 718 (11)
- Aluminium (10)
- DED (10)
- Distortion (10)
- High power laser beam welding (10)
- Hochfester Stahl (10)
- Hybrid laser-arc welding (10)
- Laser hybrid welding (10)
- Gas metal arc welding (9)
- Hot cracking (9)
- Hybrid laser arc welding (9)
- Lorentz force (9)
- Thick-walled steel (9)
- Weld pool shape (9)
- Widerstandspunktschweißen (9)
- Additive Fertigung (8)
- Advanced high strength steels (8)
- Grain refinement (8)
- Hot cracking test (8)
- Natural convection (8)
- Numerical modeling (8)
- Pipeline (8)
- Welding (8)
- Electromagnetic weld pool control (7)
- Element transport (7)
- Hartmann effect (7)
- Laserhybridschweißen (7)
- Magnetohydrodynamics (7)
- Neural networks (7)
- Numerical welding simulation (7)
- Porosity (7)
- Residual stress (7)
- Schweißsimulation (7)
- Simulation (7)
- Ti-6Al-4V (7)
- Critical strain (6)
- Design of experiments (6)
- Festigkeit (6)
- Friction stir welding (6)
- Hybrid welding (6)
- Laser Metal Deposition (6)
- Liquid metal embrittlement (6)
- Residual stresses (6)
- Rissbildung (6)
- Temperature field (6)
- Werkstofffragen (6)
- AM (5)
- Artificial neural network (5)
- Directed Energy Deposition (5)
- Electron beam welding (5)
- Fatigue (5)
- Gründungsstrukturen (5)
- Heat conduction (5)
- Heat treatment (5)
- High strength steel (5)
- High strength steels (5)
- Hybrid Laser Arc Welding (5)
- Laser-Pulver-Auftragschweißen (5)
- Liquid Metal Embrittlement (5)
- Magnetic field (5)
- Marangoni stresses (5)
- Solidification (5)
- Sysweld (5)
- Weld pool dynamics (5)
- Weldability (5)
- Ökobilanzierung (5)
- Advanced high strength steel (4)
- Austenitic stainless steels (4)
- Corrosion (4)
- Crack (4)
- Deep penetration (4)
- Deep penetration laser beam welding (4)
- Directed energy deposition (4)
- Duplex stainless steel (4)
- Eigenspannungen (4)
- Elektromagnetische Schmelzbadunterstützung (4)
- Elektronenstrahlschweißen (4)
- Endkrater (4)
- FEA (4)
- Fatigue tests (4)
- Fiber laser (4)
- GTA welding (4)
- Hardness (4)
- Inverse heat conduction problem (4)
- Keyhole (4)
- Laser (4)
- Laser-hybrid welding (4)
- Longitudinal weld (4)
- MSG-Schweißen (4)
- Marangoni flow (4)
- Modified spray arc (4)
- Offshore Windenergieanlagen (4)
- Optimisation (4)
- Orbital welding (4)
- Partial penetration (4)
- Post-weld heat treatment (4)
- Quality assurance (4)
- Sensitivity analysis (4)
- Stainless Steel (4)
- Stress reduction (4)
- Tubular X-joints (4)
- Weld defects (4)
- 316L (3)
- 9%Ni steel (3)
- AHSS (3)
- Adaptive control (3)
- Arc welding (3)
- Automated manufacturing (3)
- Automatisierte Fertigung (3)
- Automotive application (3)
- Automotive assembly (3)
- Automotive industry (3)
- Bulging effect (3)
- CTW-Test (3)
- Crack formation (3)
- Cracking (3)
- Cracks (3)
- Cryogenic steel (3)
- Crystal branch development (3)
- Digital image correlation (3)
- Digitalisierung (3)
- Electromagnetic Weld Pool Support (3)
- End crater (3)
- Equivalent heat source (3)
- Experimental validation (3)
- Fatigue life (3)
- Finite element analysis (3)
- Finite element simulation (3)
- Full Penetration (3)
- Full penetration (3)
- GMAW (3)
- Gap (3)
- Gap bridgeability (3)
- Gaps (3)
- Grain size (3)
- Heißrisse (3)
- High energy beam welding (3)
- High-power laser (3)
- High-strength low-alloy steel (3)
- Hot crack (3)
- Instrumentierte Eindringprüfung (3)
- Künstliche Intelligenz (3)
- L-PBF (3)
- Laser energy distribution (3)
- Laser implantation (3)
- Laser scanner optics (3)
- Laserimplantation (3)
- Leichtbau (3)
- Local reduced pressure (3)
- MAG welding (3)
- Mathematical modeling (3)
- Mathematical models (3)
- Mechanical mismatching (3)
- Mobile vacuum (3)
- Molten pool dynamics (3)
- Multi-physical modelling (3)
- Notch stress approach (3)
- Numerical modelling (3)
- Numerical process simulation (3)
- Periodic solidification pattern (3)
- Phase transformation (3)
- Process chain (3)
- Process simulation (3)
- Punktschweißverbindung (3)
- Ray tracing (3)
- Refill friction stir spot welding (3)
- Repair welding (3)
- Rundnaht (3)
- Schweißverfahren (3)
- Selective Laser Melting (3)
- Simulating (3)
- Single pass welding (3)
- Spot welding (3)
- Stainless steels (3)
- TRIP steel (3)
- Temperature (3)
- Temperature field generation (3)
- Tensile tests (3)
- Thermo-fluid flow (3)
- Thick Materials (3)
- Transient heat transfer (3)
- Unterpulverschweißen (3)
- Verzug (3)
- WAAM (3)
- Weldbonding (3)
- Welding-induced distortion (3)
- Widerstandspressschweißen (3)
- AC weld pool support (2)
- AISI D2 (2)
- Al Ti5B1 (2)
- Alloy 1050A (2)
- Alloy 5083 (2)
- Alloy 6082 (2)
- Aluminium alloys (2)
- Arc Welding Automation (2)
- Auftragschweißen (2)
- Austenite stability (2)
- Automation (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bulge effect (2)
- Bulge formation (2)
- CCT sensitivity (2)
- CO2 lasers (2)
- CTW test (2)
- Charpy impact toughness (2)
- Circumferential weld (2)
- Clad steels (2)
- Cladding parameter (2)
- Coarse-grained heat-affected zone (2)
- Columnar to equiaxed transition (CET) (2)
- Corrosion resistance (2)
- Critical strains (2)
- DED-EB (2)
- Data preparation (2)
- Defects (2)
- Defokussierung (2)
- Deposition rate (2)
- Dickblech (2)
- Die-cast aluminum (2)
- Dimensional accuracy (2)
- Directed Enery Deposition (2)
- Directivity (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex (2)
- Duplex AISI 2205 (2)
- Duplex stainless steels (2)
- EBAM (2)
- EBSD (2)
- EDXRD (2)
- Edge effects (2)
- Edge quality (2)
- Electromagnetic backing (2)
- Electromagnetic influence (2)
- Electromagnetic support (2)
- Electromagnetically controlled laser beam welding (2)
- Energy efficiency (2)
- Energy input (2)
- FEM (2)
- FGM (2)
- Fahrzeugbau (2)
- Ferromagnetischer Stahl (2)
- Fibre-optic lasers (2)
- Finite element method (2)
- Fluid flow (2)
- Flüssigmetallinduzierte Rissbildung (2)
- Frequency (2)
- Fusion zone size (2)
- GMA welding (2)
- GMA-laser hybrid welding (2)
- GTAW (2)
- Gas shielded arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Girth welding (2)
- Global optimisation (2)
- Heat flow (2)
- Heißrissresistenz (2)
- High power (2)
- High power fibre laser (2)
- High power laser (2)
- High power welding (2)
- High-power laser beam welding (2)
- High-pressure pipelines (2)
- High-strength steel (2)
- Hochleistungsschweißen (2)
- Hybrid components (2)
- In situ strain (2)
- Industrial application (2)
- Inverse modelling (2)
- Jacket Support Structures (2)
- Keyhole collapse (2)
- Keyhole mode welding (2)
- Kornfeinung (2)
- LME (2)
- Laser Beam Welding (2)
- Laser Powder Bed Fusion (2)
- Laser Welding (2)
- Laser arc-hybrid welding (2)
- Laser beam Welding (2)
- Laser beam weliding (2)
- Laser beams (2)
- Laser cladding (2)
- Laser keyhole welding (2)
- Laser powder cladding (2)
- Laser-Hybridschweißen (2)
- Laser-metal-deposition (2)
- Laserstrahl-MSG-Hybridschweißen (2)
- Lichtbogensensorik (2)
- Life Cycle Assessment (LCA) (2)
- Life cycle assessment (LCA) (2)
- Lightweight Design (2)
- Lightweight body shell design (2)
- Lightweight concepts (2)
- Local critical strain (2)
- Lokale Festigkeit (2)
- Manganese (2)
- Marangoni convection (2)
- Marangoni effect (2)
- Martensitbildung (2)
- Martensite kinetic (2)
- Matching ferritic welding electrode (2)
- Material flow (2)
- Material questions (2)
- Melt pool dinamics (2)
- Melt pool dynamics (2)
- Mesh analysis (2)
- Metal mixing (2)
- Model prediction (2)
- Molten pool (2)
- Moving mesh (2)
- Multiple experiments (2)
- Neuronales Netz (2)
- Nickel (2)
- Nickel alloys (2)
- Offshore Wind (2)
- Optical flow (2)
- Optical measurement (2)
- Optimization (2)
- Oscillating magnetic field (2)
- Oscillating vapor plume (2)
- PBF-LB/M (2)
- Partial penetration welding (2)
- Path planning (2)
- Pipe manufacturing (2)
- Pores (2)
- Porosity prevention (2)
- Porosity reduction (2)
- Preheating (2)
- Process monitoring (2)
- Process reliability (2)
- Prozessüberwachung (2)
- Qualitätssicherung (2)
- RSW (2)
- Resource efficiency (2)
- Rissanfälligkeit (2)
- SMAW (2)
- Schutzgasschweißen (2)
- Schweißeignung (2)
- Schweißnahtbewertung (2)
- Schweißnahtfehler (2)
- Schweißstruktursimulation (2)
- Seam geometry (2)
- Shielding gases (2)
- Short calculation time (2)
- Simulation and calculation (2)
- Simulation und Berechnung (2)
- Spannungen (2)
- Stainless steel (2)
- Stiffness (2)
- Stochastic search method (2)
- Strain rate (2)
- Strain rates (2)
- Strength (2)
- Stresses (2)
- Structural stress approach (2)
- Submerged arc welding (2)
- Superellipse (2)
- Surface structuring (2)
- Synchrotron (2)
- Tack welding (2)
- Technical crack detection (2)
- Temperature behavior (2)
- Tensile strength (2)
- Testing method (2)
- Thermal analysis (2)
- Thermal cycles (2)
- Thermography (2)
- Thick plates (2)
- TiB2 (2)
- Time-to-solution (2)
- Titanium alloy (2)
- Transformable steels (2)
- Ultrasonic vibration (2)
- Umweltwirkungen (2)
- V groove (2)
- Validierung (2)
- Vapor plume (2)
- Vapour plume (2)
- Verfahrensvergleich (2)
- Volume heat source (2)
- WIG-Schweißen (2)
- Weld metal (2)
- Weld pool (2)
- Welding of aluminum (2)
- Welding of thick metal plates (2)
- Welding thermal cycle (2)
- Welding-induced residual stress (2)
- Wire arc additive manufacturing (2)
- Wire electron beam additive manufacturing (2)
- Wärmebehandlung (2)
- YAG lasers (2)
- Zinc coated steel (2)
- Zink (2)
- laser welding (2)
- resistance spot welding (2)
- Überlappbereich (2)
- 1.4306 (1)
- 2D ray tracing (1)
- 3D FE-simulation (1)
- 3D ray tracing (1)
- 3D-FE-Simulation (1)
- 3DDruck (1)
- 9% Ni Steel (1)
- 9%Ni steel, (1)
- AC magnetic field (1)
- AC magnetic fields (1)
- AGIL (1)
- AISI 304L (1)
- AM feature integration (1)
- AZ31 magnesium alloy (1)
- Adaptive welding beam oscillation (1)
- Additiv (1)
- Additive (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al Mg Si alloys (1)
- Al-Mg-Si (1)
- Al-Mg-Si-Legierungen (1)
- Al/Mg alloys (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 247 (1)
- Aluminium alloy (1)
- Aluminium-Druckguss (1)
- Aluminium-Legierung 5083 (1)
- Aluminium/Aluminiumlegierungen (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analysis techniques (1)
- Analytical approach (1)
- Analytical model (1)
- Anisotropic austenitic steel (1)
- Anisotropic austenitic weld (1)
- Anlagenkonfiguration (1)
- Applicability (1)
- Arc sensor (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Artungleiche Werkstoffe (1)
- As-shielded arc welding (1)
- Aufbaustrategie (1)
- Aufgelöste Tragstrukturen (1)
- Auftriebskräfte (1)
- Austenitic (1)
- Austenitic steel (1)
- Austenitic welding electrode (1)
- Austenitische Stähle (1)
- Automated arc welding (1)
- Automated welding (1)
- Automatisierte schweißtechniche Fertigung (1)
- Automatisierung (1)
- Automobile engineering (1)
- Automobiles (1)
- Automobilindustrie (1)
- Automotive (1)
- Automotive parts (1)
- Axial force (1)
- Bead-on-plate welds (1)
- Beam Welding (1)
- Beam attenuation (1)
- Beam welding (1)
- Bending test (1)
- Bewegtes Gitter (1)
- Bionik (1)
- Boundary element method (1)
- Build - up Strategy (1)
- Build direction (1)
- Build-up Orientation (1)
- Build-up strategy (1)
- Bulging (1)
- Bulging effects (1)
- Buoyancy (1)
- C-Mn steels (1)
- CFD model (1)
- CFD-model (1)
- CO2 laser (1)
- CO2- and Nd:YAG laser (1)
- Calculation (1)
- Calculation time (1)
- Carbon Steels (1)
- Carbon dioxide footprint (1)
- Carbon steels (1)
- Cavities (1)
- Charpy V-notch tests (1)
- Cimensional Accuracy (1)
- Circumferential welds (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Cold Cracking Test (1)
- Columnar crystal growth (1)
- Combined laser manufacturing (1)
- Combined processes (1)
- Computer vision (1)
- Condensation (1)
- Condition monitoring (1)
- Contact element (1)
- Continuous cooling transformation behaviour (1)
- Continuous cooling transformation diagrams (1)
- Control magnetic field (1)
- Controlled tensile weldability test (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Crack growth (1)
- Cracking susceptibility (1)
- Cracking susceptibility of AHSS (1)
- Cracks in the HAZ (1)
- Crash behaviour (1)
- Crater (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- CuSn1 (1)
- DED-LB (1)
- DIC (1)
- DIC technique (1)
- DIP transfer (1)
- Damage prediction (1)
- Datenbankstruktur (1)
- Deep learning (1)
- Deformation (1)
- Deformation behaviour (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition welding (1)
- Diagnostic of the torch (1)
- Die-casted aluminum (1)
- Different welding position (1)
- Digital Image Correlation (1)
- Digital factory (1)
- Digitale Bildkorrelationstechnik (1)
- Digitalization (1)
- Digitization (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Directed Energy Depositio (1)
- Discontinuities (1)
- Dissimilar joints (1)
- Dissimilar welding (1)
- Distortion simulation (1)
- Drive pinion (1)
- Drop out of bead (1)
- Duplex nucleation theory (1)
- Duplex steels (1)
- Dynamic fracture tests (1)
- Economic wide technology replacement (1)
- Efficient modelling (1)
- Eindringprüfung (1)
- Einfluss auf Schweißeigenspannungen (1)
- Einspannung (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic Force (1)
- Electromagnetic rectification (1)
- Electromagnetic stirring (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld control (1)
- Electromagnetic weld pool support system (1)
- Electromagnetic weld support system (1)
- Electron beam (1)
- Elektonenstrahlschweißen (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadbeeinflussung (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- Embedded electronics (1)
- End-crater (1)
- Energy density distribution (1)
- Energy dispersive synchrotron X-ray diffraction (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent stress concentration factors (1)
- Equivalent volumetric heat source (1)
- Ermüdung (1)
- Execution (1)
- Experimental determination (1)
- Externally loaded hot cracking test (1)
- Externally loaded test (1)
- FE simulation (1)
- FE-model (1)
- FEM study (1)
- Fair salary (1)
- Fast calculation (1)
- Fatigue loading (1)
- Fatigue strength (1)
- FeMn-steels (1)
- Ferritic welding electrode (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Ferrous metals and alloys (1)
- Fibre laser (1)
- Fibre lasers (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fillet welds (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (FEM) (1)
- Finite elements analysis (1)
- Flange width (1)
- Flow (1)
- Flow curve (1)
- Flow pattern (1)
- Flüssigmetallversprödung (1)
- Forschungsdatenmanagement (1)
- Fracture (1)
- Fracture behaviour (1)
- Fresnel reflection (1)
- Friction spot welding (1)
- Friction welding (1)
- Full penetration laser welding (1)
- Full penetration welding (1)
- Functional analysis (1)
- Functional-analytical solution (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone, nickel alloys (1)
- Fügequalität (1)
- Fügetechnologie (1)
- GMA surfacing (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gap compensation (1)
- Gas-shielded arc welding (1)
- General analytical solutions (1)
- Geometrie (1)
- Gleeble (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- Großrohre (1)
- HAZ crack (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat generation (1)
- Heat input (1)
- Heat source calibration (1)
- Heat source configuration (1)
- Heat source models (1)
- Heat transfer (1)
- Heat treatments (1)
- Heissrisse (1)
- Heißriss (1)
- Heißrissanfälligkeit (1)
- Heißzug (1)
- High Power Fibre Laser (1)
- High brightness (1)
- High power fiber laser (1)
- High power laser keyhole welding (1)
- High process speeds (1)
- High speed laser cladding (1)
- High-Power Welding (1)
- High-power Laserbeam Welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-strength fine-grained steels (1)
- High-strength steel sheets (1)
- Higher manganese content (1)
- Highspeed-plasma-laser-cladding (1)
- Hochlegiert (1)
- Hochleistungslaser (1)
- Hochleistungslaserstrahlschweißen (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Human health (1)
- Human health G. (1)
- Hybrid Laser arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid Part (1)
- Hybrid Welding (1)
- Hybrid bonding (1)
- Hybrid-laser-arc welding (1)
- Hybridprozesse (1)
- Hybridschweißen (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Hydrostatic force compensation (1)
- Imaging (1)
- Impact Absorbed Energy (1)
- Impact absorbed energy (1)
- Implementierung (1)
- In-situ synchrotron diffraction (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial Parts (1)
- Industrial and Manufacturing Engineering (1)
- Industrial parts (1)
- Initial gap (1)
- Instrumented indentation test (1)
- Instrumented restrained cracking test (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intensity of Restraint (1)
- Investigated materials (1)
- Joint-site structure (1)
- KI (1)
- Kaltzähe Stähle (1)
- Kerbspannungskonzept (1)
- Keyhole mode laser beam welding (1)
- Keyhole stability (1)
- Kl (1)
- Knotenweise Zwangsbedingungen (1)
- Körperschall (1)
- Künstliche Neuronale Netze (1)
- Künstliche neuronale Netze (1)
- LBW (1)
- LCA (1)
- LMD (1)
- LPA (1)
- LW (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser and electron beam welding (1)
- Laser beam welding under vacuum/reduced pressure (1)
- Laser beam wlding (1)
- Laser cutting (1)
- Laser dispersing (1)
- Laser melting (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Hybrid Welding (1)
- Laser-MSG-Hybrid Schweißen (1)
- Laser-MSG-Hybridschweißen (1)
- Laser-Metal-Deposition (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-Pulver-Auftragsschweißen (1)
- Laser-beam welding, (1)
- Laser-plasma hybrid (1)
- Laserdispergieren (1)
- Laserpulverauftragschweißen (1)
- Laserschweißen (1)
- Laserstrahl-(Hybrid)schweißen (1)
- Laserstrahlquelle (1)
- Leichtbauprinzipien (1)
- Lichtbogenschweißen (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Life cycle assessment (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Lightweight design (1)
- Lightweight principles (1)
- Liquation Cracking (1)
- Liquid Metal Embrittlement (LME) (1)
- Local fatigue approaches (1)
- Local fatigue spproaches (1)
- Locally resolved strength (1)
- Lokale Effekte (1)
- Lokale Spannungs-Dehnungskurven (1)
- Low Temperature Toughness (1)
- Low alloy steels (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- Low transformation temperature (LTT) alloy (1)
- Low transformation temperature filler material (1)
- Längsnahtschweißen (1)
- Lötrissigkeit (1)
- MAG Prozesssteuerung (1)
- MHD (1)
- MIG welding (1)
- MRO (1)
- MSG-Engspaltschweißen (1)
- Macro Processing (Joining, Welding) (1)
- Macro processing (1)
- Magnesium (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetfelder (1)
- Magnetic bath support (1)
- Maintenance (1)
- Manganese alloyed stainless steels (1)
- Maritime Components (1)
- Maritime industry (1)
- Martensite start temperature (1)
- Martensite transformation (1)
- Martensitic transformation (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Material ranking (1)
- Measurement (1)
- Mechanical Properties (1)
- Mechanical properties of joints (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical strength (1)
- Mechanical-technological properties (1)
- Mechanisch technologische Kennwerte (1)
- Mehrlagenschweißen (1)
- Metal forming tools (1)
- Metallic vapour plume (1)
- Metallurgie (1)
- Metallurgische Fragen (1)
- Metastabiler austenitischer Chrom-Nickel-Stahl (1)
- Microcracking (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Misalignment of the edges (1)
- Mittelrippendefekt (1)
- Model calibration (1)
- Model order reduction (1)
- Modeling (1)
- Modeling approach (1)
- Modeling of fluid flow (1)
- Modellierung (1)
- Modified varestraint transvarestraint (MVT) hot cracking test (1)
- Molten pool behaviour (1)
- Monitoring systems (1)
- Multi - physical modeling (1)
- Multi pass welding (1)
- Multi-attribute decision method (1)
- Multi-criteria decision support (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-physical modeling (1)
- Multi-regional inputeoutput data (1)
- Multiple reflections (1)
- Multirun welding (1)
- Narrow gap welding (1)
- Narrow-gap welding (1)
- Neural Networks (1)
- Neural network (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel-based superalloy (1)
- Nickelbasis-Superlegierungen (1)
- Non-destructive testing (1)
- Normen (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerical Welding Simulation (1)
- Numerical analysis (1)
- Numerical approach (1)
- Numerical simulations (1)
- Numerical welding simulations (1)
- Numerische ISmulation (1)
- Numerische Simulation (1)
- Offshore Windenergie (1)
- Offshore wind turbines (1)
- Open science (1)
- Open source (1)
- OpenScience (1)
- Optical measurement technique (1)
- Optical measuring technique (1)
- Optical measurment technique (1)
- Optische Emissionsspektroskopie (OES) (1)
- Orbital process (1)
- Orbitalschweißen (1)
- Ortsaufgelöst (1)
- PBF/LB-M (1)
- Particles (1)
- Pearlitic microstructure (1)
- Pendelstrategie (1)
- Penetration depth (1)
- Phase field method (1)
- Phänomenologisch (1)
- Pin profile (1)
- Pipe Welding (1)
- Pipe laying (1)
- Pipe weld preparation (1)
- Pipe welding (1)
- Pipeline construction (1)
- Pipeline steel X120 (1)
- Pipeline steel of grade X120 (1)
- Plane crystalization (1)
- Plasma (1)
- Plasma cutting (1)
- Plasma-Transferred-Arc (1)
- Plasma-cut samples (1)
- Plasma-cutting (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Plume (1)
- Plume heating (1)
- Pointwise constraints (1)
- Poren (1)
- Porosität (1)
- Position welding (1)
- Positionsschweißen (1)
- Post-welding heat treatment (1)
- Powder Analysis (1)
- Pre-weld Preparation (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Prior austenite grain size (1)
- Process combinations (1)
- Process diagnostics and simulation (1)
- Process innovations (1)
- Process monitoring and control (1)
- Process procedures (1)
- Process stability (1)
- Profilvermessung (1)
- Proper generalized decomposition (1)
- Prozesskette (1)
- Prozesskombinationen (1)
- Prozessparametern (1)
- Prozesssimulation (1)
- Prüfverfahren (1)
- Pufferschichten (1)
- Pulsed laser beam welding (1)
- Pulverbettbasiert (1)
- Punktschweißkleben (1)
- Quality monitoring (1)
- Qualität (1)
- Rail tracks (1)
- Ray teacing (1)
- Ray tracing method (1)
- Ray-tracing (1)
- Ray-tracing methods (1)
- Recycling (1)
- Reference lists (1)
- Repair and overhaul (1)
- Research data management (1)
- Resistance Spot Welding (RSW) (1)
- Resistance pressure welding (1)
- Resistance welding (1)
- Result display (1)
- Retained austenite (1)
- Robots (1)
- Root dropping (1)
- Rundnähte (1)
- SEM (1)
- SEP-1220-3 (1)
- SLM (1)
- SLM printed plasma torch (1)
- Schallemissionsanalyse (SEA) (1)
- Schutzgas (1)
- Schweißbereiche (1)
- Schweißen (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißnahtgeometrie (1)
- Schweißnahtimperfektionen (1)
- Schweißprozesse (1)
- Schweißtechnik (1)
- Schweißunregelmäßigkeiten (1)
- Schwingfestigkeit (1)
- Secondary heat source (1)
- Selektive-laser-melting (1)
- Self-restraint hot cracking (1)
- Self-restraint test (1)
- Sensitivität (1)
- Sensitivitätsanalyse (1)
- Sensivitätsanalyse (1)
- Sensor (1)
- Sensorik (1)
- Sensors (1)
- Shear strength (1)
- Sheet (1)
- Shielding atmosphere (1)
- Shielding gas (1)
- Ship building (1)
- Shipbuilding (1)
- Shipbuilding steel (1)
- Shrinkage (1)
- Similar and dissimilar material spot weld (1)
- Simufact.welding (1)
- Single-pass welding (1)
- Social Life Cycle Assessment (SLCA) (1)
- Social life cycle assessment (SLCA) (1)
- Software (1)
- Solidification behaviour (1)
- Solidification crack (1)
- Solidification craking (1)
- Spannungs-Dehnungskurve (1)
- Spannungsdehnungskurve (1)
- Spiralstrategie (1)
- Spot weld (1)
- Spurgröße (1)
- Stahl und Aluminium (1)
- Stainless austenitic and duplex steels (1)
- Standardization (1)
- Standards (1)
- Steady-state weld pool (1)
- Steel (1)
- Steel and Al (1)
- Steels (1)
- Strain field (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Super martensitic filler material (1)
- Superalloy (1)
- Superelliptic Lamé curves (1)
- Support structures (1)
- Surface cracks (1)
- Surface roughness (1)
- Surface texturing (1)
- Susceptibility to cracking (1)
- Sustainability assessment (1)
- System technology (1)
- TIG welding (1)
- TRIP (1)
- TRIP - transformation induced plasticity (1)
- Tandem Gas Metal Arc Welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tear tests (1)
- Temperature Field Generation (1)
- Temperature distribution (1)
- Temperaturentwicklung (1)
- Tensile Strength (1)
- Tensile performance (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensileshear (1)
- Test method (1)
- Texture (1)
- Thermal energy generation (1)
- Thermal softening (1)
- Thermo physical simulation (1)
- Thermo-capillary convection (1)
- Thermo-fluid dynamics (1)
- Thermographie (1)
- Thermomechanical material properties (1)
- Thermomechanisch (1)
- Thermophysical material properties (1)
- Thick materials (1)
- Thick metal plate welding (1)
- Thick plate (1)
- Thick plate welding (1)
- Thick steel plates (1)
- Thick walled parts (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- Ti - 6Al - 4V (1)
- Ti-6Al-4 V (1)
- Ti3Al2.5V (1)
- Tick plates (1)
- Tool torque (1)
- Torsion (1)
- Toughness (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transformation-induced plasticity (TRIP) (1)
- Traverse force (1)
- Tube welding (1)
- Tubular joints (1)
- Tungsten carbide (1)
- Turbine blade (1)
- Turbine components (1)
- Turbine industry (1)
- Turbulence (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Ultrasonic C-scan image (1)
- Ultrasonic field (1)
- Ultrasonic non-destructive evaluation (1)
- Umwandlungsplastischen Konstante K (1)
- Umweltschutz (1)
- Unalloyed steels (1)
- Untersuchung laserstrahlgeschweißter Verbindungen (1)
- V-notch impact toughness (1)
- Vacuum (1)
- Vakuum (1)
- Vapor recondensation (1)
- Vaporization (1)
- Variables influencing hot cracking (1)
- Vehicle bodies (1)
- Vehicle construction (1)
- Viscoplasticity (1)
- Volltransient (1)
- Volumetric heat source (1)
- WEBAM (1)
- Wear resistance (1)
- Weld cracks (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld microstructure (1)
- Weld plan modification (1)
- Weld pool behavior (1)
- Weld pool geometry (1)
- Weld pool modeling (1)
- Weld pool shape approximation (1)
- Weld pool stabilization (1)
- Weld pool support (1)
- Weld root (1)
- Weld seam geometry (1)
- Weld specimens (1)
- Weldbonded joint behaviour (1)
- Weldbonded joints (1)
- Weldbonding process reliability (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding costs (1)
- Welding cracks (1)
- Welding distortion (1)
- Welding distortions (1)
- Welding jig (1)
- Welding of AlMg3 (1)
- Welding parameter (1)
- Welding process selection (1)
- Welding process simulation (1)
- Welding residual stress (1)
- Welding residual stresses (1)
- Welding under external loading (1)
- Weldx (1)
- Werkstoffe (1)
- Werkstoffranking (1)
- Widerstandpunktschweißen (1)
- Widerstandschweißen (1)
- Windkraftanlagen (1)
- Windturm (1)
- Wineglass shape (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Work-flow (1)
- Wärmenachbehandlung (1)
- Wärmequellenkonfiguration (1)
- X-ray computer tomography (1)
- X8Ni9 (1)
- Zinc (1)
- Zinkbeschichtung (1)
- cryogenic steel (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- hardness (1)
- highspeed plasma laser cladding (1)
- hochfeste Stähle (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- local effects (1)
- microstructure (1)
- quality assurance (1)
- selbstlernendes (1)
- sensitivity analysis (1)
- strength (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- vacuum (1)
- welding residual stresses (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Äquivalente Wärmequelle (1)
- Ökobilanz (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (255)
- 9.3 Schweißtechnische Fertigungsverfahren (250)
- 7 Bauwerkssicherheit (6)
- 7.2 Ingenieurbau (4)
- 9.6 Additive Fertigung metallischer Komponenten (3)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 7.7 Modellierung und Simulation (2)
- 9.0 Abteilungsleitung und andere (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
Eingeladener Vortrag
- nein (64)
Laser metal deposition is described with its applications for additive manufacturing. The necessary process chain is discussed, with regard to weld bead dimensions and 3D build-up strategy. Metallurgical cross sections, x-ray and tensile tests are conducted. As demonstrative components, a gas turbine burner and a turbine blade are shown.
Laser metal deposition (LMD) is an established technology for two-dimensional surface coatings. It offers high deposition rates, high material flexibility, and the possibility to deposit material on existing components. Due to these features, LMD has been increasingly applied for additive manufacturing of 3D structures in recent years. Compared to previous coating applications, additive manufacturing of 3D structures leads to new challenges regarding LMD process knowledge. In this paper, the process steps for LMD as additive manufacturing technology are described. The experiments are conducted using titanium alloy Ti-6Al-4Vand Inconel 718. Only the LMD nozzle is used to create a shielding gas atmosphere. This ensures the high geometric flexibility needed for additive manufacturing, although issues with the restricted size and quality of the shielding gas atmosphere arise. In the first step, the influence of process parameters on the geometric dimensions of single weld beads is analyzed based on design of experiments. In the second step, a 3D build-up strategy for cylindrical specimen with high dimensional accuracy is described. Process parameters, travel paths, and cooling periods between layers are adjusted. Tensile tests show that mechanical properties in the as-deposited condition are close to wrought material. As practical example, the fir-tree root profile of a turbine blade is manufactured. The feasibility of LMD as additive technology is evaluated based on this component.
A fundamental study of physical mechanisms of wineglass-shaped fusion zone profile in laser melting
(2024)
The fusion zone geometry in laser melting processes e.g., laser welding and laser-based additive manufacturing, of metallic materials has commonly a wineglass-shaped profile which is critical to the grain orientation and stress distribution. Hereby, we adopt for the first time a decoupling work through a combination of multi-physics modelling and experiments to reveal the fundamental mechanisms of this special morphology. Two physicsbased easy-to-use metal vapour models are proposed to consider the vapour’s momentum and thermal effects separately. It is found that the direct laser energy absorption and Marangoni shear stress which are widely hypothesised to dominate the wineglass-shape formation show only a minor influence. The additional heating from the metallic vapour plume rather than its momentum impact contributes predominantly to the enlarging of the molten pool top region, resulting directly in the formation of the wineglass-shaped fusion zone. The generality of the plume heating effect is also validated in two types of materials (steel and Al) in a wide range of parameters.
A technique for calculating the main solidification parameters for a two-dimensional columnar crystal growth during complete penetration laser beam welding of thin steel sheets was developed. Given that the weld pool interface is described by Lamé curves (superellipses) within the horizontal plane of growth, general analytical solutions were derived for the geometry of the crystal axis and the corresponding growth rate and cross-sectional area of the crystal. A dimensionless analysis was performed to provide insights on the dependence of the solidification parameters on the shape and dimensions of the rear part of the weld pool boundary. The derived solutions were applied for the case of complete penetration laser beam keyhole welding of 2 mm thick 316L austenitic chromium-nickel steel sheets. It was shown that the reconstruction of the weld pool boundary with Lamé curves provides higher accuracy and flexibility compared to results obtained with elliptical functions. The validity of the proposed technique and the derived analytical solutions was backed up by a comparison of the obtained solutions to known analytical solutions and experimentally determined shapes and sizes of the crystals on the top surface of the sheet. The dimensions of the calculated crystal axis correlated well with the experimentally obtained results.
This work aims to find the thermal cycles during and after fusion welding through simulation by first calculating the resulting local temperature field in the quasi-stationary part of the process. Here complete-penetration keyhole laser beam welding with a laser power of 18 kW on a 15 mm thick slab of a low-alloyed steel at a welding speed of 2 m/min is considered. In order to physically depict the laser material interaction a multi-physics numerical model including the effects of phase transformation, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature is developed. It uses a fixed keyhole geometry with a right truncated circular cone shape to introduce the laser beam energy to the workpiece. In a subsequent study, the resulting local temperature field is then used as an equivalent heat source in order to predict the unsteady thermal cycle during and after fusion welding. The translational movement of the laser beam through the workpiece is represented by a moving mesh approach. For the simulation, stationary heat transfer and fluid dynamics are described by a system of strongly coupled partial differential equations. These are solved with the commercial finite element software COMSOL Multiphysics 5.0. The results of the numerical simulation are validated by experiments, where the weld bead shapes and the thermal cycles show good correlation.
The weld quality and the possible defect formation are directly determined by the weld pool shape and the thermo-fluid dynamics therein. In this paper, an untypical weld pool profile, i.e., elongated at its top and bottom but narrowed at the middle, is found experimentally and numerically in the wire feed laser beam welding. The detrimental influence of the weld pool narrowing on the element transport is analyzed and discussed. A magnetohydrodynamic technique is utilized to suppress the narrowing, aiming at a more homogenous element distribution. It is found that a low-temperature region is formed in the middle of the weld pool due to the interaction of the two dominant circulations from the top and bottom regions. The weld pool is significantly narrowed due to the untypical growth of the mushy zone in the low-temperature region, which results in a direct blocking effect on the downward flow and the premature solidification in the middle region. The Lorentz force produced by a transverse oscillating magnetic field shows the potential to change the flow pattern into a single-circulation type and the low-temperature-gradient region is mitigated.
Therefore, the downward transfer channel is widened, and its premature solidification is prevented. The numerical results are well validated by experimental measurements of metal/glass observation and X-ray fluorescence element mapping.
In this contribution, we present a physically motivated heat source model for the numerical modeling of laser beam welding processes. Since the calibration of existing heat source models, such as the conic or Goldak model, is difficult, the representation of the heat source using so-called Lamé curves has been established, relying on prior Computational Fluid Dynamics (CFD) simulations.
Lamé curves, which describe the melting isotherm, are used in a subsequent finite-element (FE) simulation to define a moving Dirichlet boundary condition, which prescribes a constant temperature in the melt pool. As an alternative to this approach, we developed a physically motivated heat source model, which prescribes the heat input as a body load directly. The new model also relies on prior CFD simulations to identify the melting isotherm. We demonstrate numerical results of the new heat source model on boundary-value problems from the field of laser beam welding and compare it with the prior CFD simulation and the results of the Lamé curve model and experimental data.
The present research work aims at clarification of the effect of the welding electrode type on the mechanical properties of SMA welded joints of 9%Ni steel plates. Properties of produced SMA welded joints were evaluated using different non-destructive and destructive investigation methods. In comparison with the conventionally used Ni-based welding electrode ENiCrMo-3 (AWS A5.11), an experimentally produced non-conventional ferritic welding electrode with 11%Ni (ENi11-Company specification) has resulted in a better combination of the mechanical properties of SMA welded joints of this steel type for critical cryogenic applications. Besides, a positive economic impact for the experimentally produced non-conventional ferritic welding electrode, due to its lower cost, could be another attractive aspect.
The additional element from the filler wire in the laser beam welding is usually distributed inhomogeneously in the final weld due to the high solidification rate of weld pool. It has been found that the electromagnetic stirring produced by an external oscillating magnetic field can enhance the material mixing in the weld pool to achieve a more uniform element distribution. However, the magnetic field has a highly non-linear and multi-coupled interaction with the weld pool behavior, which makes the quantitative explanation of the physical mechanism difficult. In this study, the effect of electromagnetic stirring on the transport phenomena in the wire feed laser beam welding is investigated by a numerical modelling. A 3D transient multi-physical model considering the magnetohydrodynamics, heat transfer, fluid flow, keyhole dynamics and element transport is developed. The multiple reflections and the Fresnel absorption of the laser on the keyhole wall are calculated using the ray tracing method. The numerical results show that a Lorentz force produced by the oscillating magnetic field and its induced eddy current gives significant influence on the transport phenomena in the molten pool. The forward and downward flow is enhanced by the electromagnetic stirring, which homogenizes the distribution of the additional elements from a nickel-based filler wire in a steel weld pool. The numerical results show a good agreement with the high-speed images of the molten pool, the fusion line from the optical micrograph and the element distribution from the energy dispersive X-ray spectroscopy. This work provides a physical base for the electromagnetic-controlled laser beam welding and some guidance for the selection of electromagnetic parameters.
The additional element from the filler wire in the laser beam welding is usually distributed inhomogeneously in the final weld due to the high solidification rate of weld pool. It has been found that the electromagnetic stirring produced by an external oscillating magnetic field can enhance the material mixing in the weld pool to achieve a more uniform element distribution. However, the magnetic field has a highly non-linear and multi-coupled interaction with the weld pool behavior, which makes the quantitative explanation of the physical mechanism difficult. In this study, the effect of electromagnetic stirring on the transport phenomena in the wire feed laser beam welding is investigated by a numerical modelling. A 3D transient multi-physical model considering the magnetohydrodynamics, heat transfer, fluid flow, keyhole dynamics and element transport is developed. The multiple reflections and the Fresnel absorption of the laser on the keyhole wall are calculated using the ray tracing method. The numerical results show that a Lorentz force produced by the oscillating magnetic field and its induced eddy current gives significant influence on the transport phenomena in the molten pool. The forward and downward flow is enhanced by the electromagnetic stirring, which homogenizes the distribution of the additional elements from a nickel-based filler wire in a steel weld pool. The numerical results show a good agreement with the high-speed images of the molten pool, the fusion line from the optical micrograph and the element distribution from the energy dispersive X-ray spectroscopy. This work provides a physical base for the electromagnetic-controlled laser beam welding and some guidance for the selection of electromagnetic parameters.
A multi-physics numerical model was developed to investigate the influence of a steady magnetic field aligned perpendicular to the welding direction during partial penetration high power laser beam welding of aluminium in downhand position. Three-dimensional heat transfer, fluid dynamics including phase transition and electromagnetic field partial differential equations were successfully solved with the finite element differential equation solver COMSOL Multiphysics 4.2. The implemented material model used temperature-dependent properties up to evaporation temperature. Marangoni convection in the surface region of the weld pool, natural convection due to the gravitational field and latent heat of solidliquid phase transition were taken into account. Solidification was modelled by the CarmanKozeny equation for porous media morphology. The flow pattern in the melt as well as the weld bead geometry were significantly changed by the induced Lorentz force distribution in the liquid metal. It reveals that the application of a steady magnetic field to laser beam welding with corresponding Hartmann numbers Ha2 ≈ 104 allows for a suppression of the characteristic wineglass-shape of the weld cross section caused by thermocapillary flow. The numerical results are in good agreement with experimental results obtained with welding of AlMg3 with a 16 kW disc laser. The steady magnetic field was delivered by permanent magnets mounted on both lateral sides of the weld specimen. The maximum magnetic flux density was around 500 mT. It shows, that the applied magnetic field has a predominant dissipating effect on the weld pool dynamics independently of its polarity.
In this study, a three-dimensional CFD-simulation model was developed to simulate the fluid flow in the weld pool. The CFD-model showed a bulging region in the middle of the depth, which is separated from the top surface and bottom surface by two narrowing regions. It can be concluded that the interaction of the movement of the laser source with the Marangoni vortex leads to a teardrop shape at the upper and bottom surface of the workpiece. Additionally, it shows that the bulging in the weld is a result of the backflows on the upper and lower sides due to the thermo-capillary-driven flows. The weld pool shape was used as a heat source in a two-dimensional thermomechanical model, which allows a highly accurate transformation of the weld pool dimensions obtained from the CFD model. This developed technique allows the consideration of physical aspects, which cannot be considered when using traditional heat sources. The mechanical model has shown that the chronological order of the solidification of the weld has a significant influence on the nature and distribution of the stresses in the weld. High tensile stress has been observed in the bulging region, i.e. in the susceptible region for solidification cracking, when compared to the other narrowing regions, which show compressive stress.
Die Präsentation gibt einen Überblick bezüglich der von der BAM im Rahmen des SimCoLas Verbundprojekts durchgeführten Arbeiten zum Thema "Photonische Prozessketten". Die numerisch abgebildete Prozesskette Tiefziehen/Laserstrahlschweißen wird darsgestellt und diskutiert. Fokus der Diskussion ist die entwickelte Methodik zur konsistenten Abbildung numerischer Prozessketten mit der Applikation Heissrisskritikalität beim Laserstrahlschweißen.
Additive Fertigungsverfahren gewinnen aufgrund der schnellen, flexiblen und kosten-günstigen Fertigung von Bauteilen zunehmend an Bedeutung. Das Laserpulverauf-tragschweißen (LPA) wurde anfangs hauptsächlich als Beschichtungsverfahren ein-gesetzt. Diese Technologie bewerkstelligt aber auch das Reparieren von verschlisse-nen Bauteilen, sodass diese zeitsparend und ressourcenschonend erneuert werden können. Die hohe Aufbaurate, die flexible Pulverzusammensetzung sowie die hohe Endkonturnähe ermöglichen heutzutage die Entwicklung und additive Fertigung von neuen Materialien, wie zum Beispiel Nickel-Titan-Formgedächtnislegierungen.
Selective Laser Melting (SLM) and Laser Metal Deposition (LMD) are prominent methods in the field of additive manufacturing technology. While the powder-bed based SLM allows the manufacturing of complex structures, buildrate and part volumes are limited. In contrast, LMD is able to operate with high deposition rates on existing parts, however shape complexity is limited. Utilizing their respective strengths, a combination of these two additive technologies has the potential to produce complex parts with high deposition rates.
In this paper, a process chain consisting of additive technologies SLM and LMD is described. The experiments are conducted using the alloys Ti-6Al-4V and Inconel 718. A cylindrical test specimen is produced and the microstructure along the SLM-LMD zone is described. In addition, this process chain was tested in the manufacturing of a turbine blade. The feasibility of implementing this process chain for small batch production is discussed. The results are evaluated to show advantages and limitations of the SLM-LMD process chain. This paper is relevant for industrial or scientific users of additive manufacturing technologies, who are interested in the feasibility of a SLM-LMD process chain and its potential for increased deposition rates.
Komplexe Bauteile ohne Fügestellen sind die Spezialität additiver Verfahren. Immer deutlicher wird der Wert dieser Technologie für den Turbomaschinenbau, etwa bei der Fertigung von Turbinenschaufeln mit inneren Kühlstrukturen. Wichtig für vorbildgetreue Turbinenkomponenten: Die Technologie ermöglicht die Fertigung von Freiformen und Hinterschnitten, von außen- und innenliegenden filigranen, komplexen Strukturen als Einzelteil - und das in einem einzigen Arbeitsschritt. Des Weiteren benötigen additive Verfahren keine formgebenden Werkzeuge und weisen demnach kürzere Prozessketten im Vergleich zu konventionellen Herstellungsverfahren auf. Wirtschaftliche Vorteile kommen vor allem bei kleinen Losgrößen und Bauteilabmessungen zur Geltung.
In diesem Artikel werden am Beispiel einer Turbinenschaufel Schlüsseltechnologien einer additiven Prozesskette gezeigt. Zunächst erfolgt die additive Fertigung einer Turbinenschaufel mittels Selective Laser Melting (SLM). Das Verfahren ermöglicht die Integration innenliegender Kühlkanäle. An dieser Schaufel wird anschließend mittels Laser-PulverAuftragschweißen (LPA) die Reparatur unterschiedlicher Beschädigungen demonstriert. Im nächsten Schritt der Prozesskette bietet ein optischer 3D-Scan der Schaufel die Möglichkeit zur Qualitätskontrolle und zum Vergleich der Bauteilabmessungen mit der Sollgeometrie.
Additive manufacturing promises a high potential for the maritime sector. Directed Energy Deposition (DED) in particular offers the opportunity to produce large-volume maritime components like propeller hubs or blades without the need of a costly casting process. The post processing of such components usually generates a large amount of aluminum bronze grinding waste. The aim of the presented project is to develop a sustainable circular AM process chain for maritime components by recycling aluminum bronze grinding waste to be used as raw material to manufacture ship Propellers with a laser-powder DED process. In the present paper, grinding waste is investigated using a dynamic image Analysis system and compared to commercial DED powder. To be able to compare the material quality and to verify DED process parameters, semi-academic sample geometries are manufactured.
In dieser Studie wurde die Heißrissanfälligkeit beim Laserstrahlschweißen für die Werkstoffe 1.4376, 1.4301 und 1.4828 mit Hilfe des CTW Test quantifiziert. Bei den Versuchen konnten Erstarrungsrisse in den Proben generiert werden. Zusätzlich können mit der Bildkorrelations-Technik die lokalen Dehnungen und Dehnungsraten während des Heißrisstests gemessen wer den. In Verbindung mit einem externen Diodenlaser zum Beleuchten der zu messende Oberfläche und lnterferenzfiltern an den Kameras konnten die DIC Messungen ohne optische Störungen durchgeführt werden.
Die Ergebnisse zeigen, dass die Heißrissbildung bei einer externen Belastung von 3 % für die Stahlsorte 1.4376 zu erwarten ist. Für die Stahls orte 1.4301 beträgt dieser Grenzwert 2 % und 1,5 % für die Stahlgüte 1.4828. Außerdem ist zu beobachten, dass die Gesamtrisslänge mit zu nehmender äußerer Zugbeanspruchung steigt
In einer Vielzahl technischer Anwendungen spielt die Aufrechterhaltung eines definierten Reibungs- und Verschleißverhaltens zwischen bewegten Oberflächen für die Sicherheit und Funktionalität eine entscheidende Rolle. Die Oberflächentechnik versucht durch geeignete Verfahren die Randschichten zu ertüchtigen, um Reibung und Verschleiß zu kontrollieren. Eine Verbesserung der Materialeigenschaften kann durch flächige Beschichtungen erreicht werden. Zusätzlich ermöglichen Oberflächenstrukturierungen breite Möglichkeiten zur Beeinflussung des Schmierungszustandes bzw. der Kontaktbedingungen. Neben Negativstrukturen bieten ebenfalls erhabene Mikrostrukturen großes Potenzial zur Beeinflussung des tribologischen Verhaltens. Ihr Einsatz ist aber aufgrund der besonderen Verschleißproblematik erhabener Strukturen momentan limitiert, so dass in der Regel zusätzliche verschleißreduzierende Beschichtungen notwendig werden.
In diesem Beitrag wurde das Verfahren der Laserimplantation angewandt, mit dem erhabene und separierte Oberflächenstrukturen hoher Verschleißfestigkeit in einem Fertigungsschritt erzeugbar sind. Das Verfahren basiert auf einem lokalisierten Dispergieren von Hartstoffpartikeln. Hierfür wurde erstmalig ein gepulster Faserlaser mit hoher Strahlqualität zur Erzeugung punkt- und linienförmiger Mikrostrukturen angewandt. Versuche wurden auf dem Kaltarbeitsstahl X153CrMoV12 unter Anwendung von Titandiborid als Hartstoff durchgeführt. Anhand von Härtemessungen konnte gezeigt werden, dass sowohl punkt- als auch linienförmige Strukturen mit Härten über 1000 HV1 und einer feinkörnigen Mikrostruktur mit feinverteilten Hartstoffpartikeln herstellbar sind. Des Weiteren war es möglich, die Implantgeometrien, welche an Querschliffen und durch Weißlichtinterferometeraufnahmen erfasst wurden, durch die Pulsleistung und Pulsdauer zu steuern.
In einer Vielzahl technischer Anwendungen spielt die Aufrechterhaltung eines definierten Reibungs- und Verschleißverhaltens zwischen bewegten Oberflächen für die Sicherheit und Funktionalität eine ent-scheidende Rolle. Die Oberflächentechnik versucht durch geeignete Verfahren die Randschichten zu ertüchtigen, um Reibung und Verschleiß zu kontrollieren. Eine Verbesserung der Materialeigenschaften kann durch flächige Beschichtungen erreicht werden. Zusätzlich ermöglichen Oberflächenstrukturierun-gen breite Möglichkeiten zur Beeinflussung des Schmierungszustandes bzw. der Kontaktbedingungen. Neben Negativstrukturen bieten ebenfalls erhabene Mikrostrukturen großes Potenzial zur Beeinflussung des tribologischen Verhaltens. Ihr Einsatz ist aber aufgrund der besonderen Verschleißproblematik er-habener Strukturen momentan limitiert, so dass in der Regel zusätzliche verschleißreduzierende Be-schichtungen notwendig werden.
In diesem Beitrag wurde das Verfahren der Laserimplantation angewandt, mit dem erhabene und sepa-rierte Oberflächenstrukturen hoher Verschleißfestigkeit in einem Fertigungsschritt erzeugbar sind. Das Verfahren basiert auf einem lokalisierten Dispergieren von Hartstoffpartikeln. Hierfür wurde erstmalig ein gepulster Faserlaser mit hoher Strahlqualität zur Erzeugung punkt- und linienförmiger Mikrostrukturen angewandt. Versuche wurden auf dem Kaltarbeitsstahl X153CrMoV12 unter Anwendung von Titandibo-rid als Hartstoff durchgeführt. Anhand von Härtemessungen konnte gezeigt werden, dass sowohl punkt- als auch linienförmige Strukturen mit Härten über 1000 HV1 und einer feinkörnigen Mikrostruktur mit feinverteilten Hartstoffpartikeln herstellbar sind. Des Weiteren war es möglich, die Implantgeometrien, welche an Querschliffen und durch Weißlichtinterferometeraufnahmen erfasst wurden, durch die Puls-leistung und Pulsdauer zu steuern.
Im Rahmen eines AiF-Forschungsvorhabens wurde die Beeinflussung des Schweißprozesses mittels generierter Wechselstrom-Magnetfelder (ACMagnetfelder) beim Laserstrahlschweißen von Aluminiumlegierungen untersucht. Das vorrangige Augenmerk galt hierbei der Entfernung von Poren sowie der Stabilisierung der Schweißnahtoberfläche zur Vermeidung von rauen Schweißnähten. Das Schweißen mit Einsatz des AC-Magneten erzeugte im Vergleich zu den Referenznähten deutlich flachere Schweißnähte mit reduzierter Porenanzahl, die typische Schuppenstruktur wurde unterdrückt. Das Magnetfeld bewirkte bei entsprechenden Parametern der magnetischen Flussdichte und der Frequenz eine Halbierung der Rauigkeit der Schweißnahtoberfläche. Neben der Oberflächenberuhigung wurde auch die Verteilung von Poren in der Schmelze beeinflusst. Es konnte nachgewiesen werden, dass bei einer geeigneten Auswahl der Parameter von AC-Magnetfeldern die Porositätsanteile in der Schweißnaht auf ein Zehntel gegenüber den Referenzschweißnähten reduziert werden können.-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Within the framework of an AiF research project, investigations were conducted into the influences exerted on the welding process using generated alternating current (AC) magnetic fields during the laser beam welding of aluminium alloys. In this respect, attention was principally paid to removing pores and to stabilising the weld surface in order to avoid rough welds. In comparison with the reference welds, welding utilising the AC magnet produced considerably flatter welds with a reduced number of pores and the typical ripple structure was suppressed. With corresponding parameters for the magnetic flux density and the frequency, the roughness of the weld surface was halved using the magnetic field. In addition to the surface stabilisation, influences were also exerted on the distribution of pores in the molten metal. It was possible to prove that, by selecting suitable parameters for AC magnetic fields, the porosity proportions in the weld can be reduced to one tenth of those in the reference welds.
The process of laser metal deposition can be applied in many ways. Mostly, it is relevant to coating, for repair welding and for additive manufacturing. To increase the effectiveness and the productiveness, a good process understanding is necessary. Statistical test planning is effectual and often used for this purpose. For financial and temporal reasons, a restriction of the test space is reasonable. In this case, it is recommended to use a D-optimal experimental design which is practically applied to extend existing test plans or if process Limits are known. This paper investigates the applicability of a D-optimum experimental design for the laser metal deposition. The results are compared to the current results of a full factorial test plan.
Known restrictions are used for the limitation of the test space. Ti6Al4 is utilized as Substrate material and powder. Comparable results of the D-optimal experimental design and of the full factorial test plan can be demonstrated. However, 80 % of time can be saved by the experimental procedure. For this reason, the application of D-optimal experimental design for laser metal deposition is recommend.
Hybrid laser-arc welding (HLAW) was applied for butt welding of 14.5 mm thick plates of ferritic cryogenic steel X8Ni9 containing 9% Ni, which is used for manufacturing storage and transport facilities of liquefied natural gas (LNG). The weld seam formation and the achievable metallurgical and mechanical properties of the hybrid welds were investigated experimentally for two types of filler wire, an austenitic wire dissimilar to the base metal (BM) and an experimentally produced matching ferritic wire. Safe penetration and uniform distribution of the austenitic filler metal in the narrow hybrid weld could only be achieved in the upper, arcdominated part of the weld. The pronounced heterogeneous distribution of the austenitic filler metal in the middle part and in the root area of the weld could not ensure sufficient notched impact toughness of the weld metal (WM). As a result, a decrease in the impact energy down to 17±3 J was observed, which is below the acceptance level of ≥34 J for cryogenic applications. In contrast, the use of a matching ferritic filler wire resulted in satisfactory impact energy of the hybrid welds of up to 134±52 J at the concerned cryogenic temperature of -196 °C. The obtained results contribute to an important and remarkable conversion in automated manufacturing of LNG facilities. In other words, the results will help to develop a new laser-based welding technology, where both quality and productivity are considered.The efficiency of the developed welding process has been demonstrated by manufacturing a prototype where a segment of the inner wall of large size LNG storage tank was constructed. In this concern, hybrid laser arc welding was conducted in both horizontal (2G) and vertical (3G) positions as a simulation to the actual onsite manufacturing. The prototype was fabricated twice where its quality was confirmed based on non-destructive and destructive examinations.
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.
Fusion welding processes are widely used for joining metal structures, such as pipes, ships, and cars. In general, these joining processes offer a very good compromise between reliability, safety, cost and maintenance which are important issues in the current economical context. The negative heat effects of welding, i.e. distortions and residual stresses of the welded parts, are well known and many researches in this field have already been done in the last decades in order to minimize them. On the experimental side, many sophisticated procedures have become state of the art to deal with this problem. On the computational side, the improvement of the simulation algorithms and the computing power enables the simulations of many physical phenomena occurring during the welding process. The implementation of welding simulation techniques is nevertheless not an easy task and often associated with expert knowledge which hinders their global application in an industrial environment. This paper is focused on the industrial requirements of a welding simulation software with special respect to the needs of the automotive industry. The necessary information to run a welding simulation and the expectations of a weld specialist without deep knowledge in numerical methods are investigated. These expectations are tested on an automotive welded assembly with a commercially available welding simulation software designed especially for the needs of the automotive industry. A welding experiment is done and the measured temperature distributions and distortions serve as reference to validate the simulation results. The result quality of the simulations of temperature fields and distortions is in best agreement with experimental data. The workflow is well adapted for the considered industrial requirements and the time-tosolution as well as the computational costs are acceptable, whereas the efficient calibration of the heat input model is still a point which will be further investigated in current and future research works.
Evaluating innovative process technologies has become highly important within the last decades. As standard tools different Life Cycle Assessment methods have been established, which are continuously improved. While those are designed for evaluating single processes they run into difficulties when it comes to assessing environmental impacts of process innovations at macroeconomic level. In this paper we develop a multi-step evaluation framework building on multi regional inputeoutput data that allows estimating macroeconomic impacts of new process technologies, considering the network characteristics of the global economy.
Our procedure is as follows: i) we measure differences in material usage of process alternatives, ii) we identify where the standard processes are located within economic networks and virtually replace those by innovative process technologies, iii) we account for changes within economic systems and evaluate impacts on emissions.
Within this paper we exemplarily apply the methodology to two recently developed innovative technologies: longitudinal large diameter steel pipe welding and turning of high-temperature resistant materials. While we find the macroeconomic impacts of very specific process innovations to be small, its conclusions can significantly differ from traditional process based approaches. Furthermore, information gained from the methodology provides relevant additional insights for decision makers extending the picture gained from traditional process life cycle assessment.
Due to rapid, localized heating and cooling, distortions accumulate in additive manufactured laser metal deposition (LMD) components, leading to a loss of dimensional accuracy or even cracking. Numerical welding simulations allow the prediction of these deviations and their optimization before conducting experiments. To assess the viability of the simulation tool for the use in a predictive manner, comprehensive systems as well as to choose the optimal product matches, product analysis methods are needed. Indeed, most of the known methods aim to analyze a product or one product family on the physical level. Different product families, however, may differ largely in terms of the number and nature of components. This fact impedes an efficient comparison and choice of appropriate product family combinations for the production system. A new methodology is proposed to analyze existing products in view of their functional and physical architecture. The aim is to Cluster these products in new assembly oriented product families for the optimization.
Hot crack assessment during production and processing of metallic materials is an essential prerequisite for the safety of welded structures. The hot cracking investigations presented here were carried out as part of a study aimed at the development of Cr/Ni low transformation temperature filler materials. Low transformation temperature alloys open up the possibility for welding high strength steels. The externally loaded Modified Varestraint Transvarestraint hot cracking test was employed in the experiments described. The hot cracking resistance was evaluated with the help of light microscopy applied at the specimen surface. The proportionality between hot cracking susceptibility and Cr/Ni alloy content was explained by the altered solidification kinetics and by the enlarged solidification interval. The internal crack paths and the three-dimensional structure of the crack net in the material volume were examined using X-ray computer tomography. The total crack lengths for different material depths and circumjacent rectangular volumes, respectively, were be determined. An increasing hot cracking susceptibility with increasing Cr/Ni alloy content was also be established for the specimen volume.
A numerical framework for simulation of the steady-state thermal behaviour in keyhole mode welding has been developed. It is based on the equivalent heat source concept and consists of two parts: computational thermo-fluid dynamics and heat conduction. The solution of the thermo-fluid dynamics problem by the finite element method for a bounded domain results in a weld pool interface geometry being the input data for a subsequent heat conduction problem solved for a workpiece by a proposed boundary element method. The main physical phenomena, such as keyhole shape, thermo-capillary and natural convection and temperature-dependent material properties are taken into consideration. The developed technique is applied to complete-penetration keyhole laser beam welding of a 15 mm thick low-alloyed steel plate at a welding speed of 33 mm/s and a laser power of 18 kW. The fluid flow of the molten metal has a strong influence on the weld pool geometry. The thermo-capillary convection is responsible for an increase of the weld pool size near the plate surfaces and a bulge formation near the plate middle plane. The numerical and experimental molten pools, cross-sectional weld dimensions and thermal cycles of the heat affected zone are in close agreement.
Offshore wind energy plays an important role for the desired transition towards a carbon dioxide free industry within the next decades. However, the grounding of the offshore wind plants governs the overall installation process besides bureaucratic bottlenecks.
The application of lightweight principles in steel construction, e.g. the usage dissolved load-bearing structures, so called Jackets foundations, offer great potential in reducing the resource consumption, especially with respect to the needed amount of steel.
In this context this paper focuses on a fully digitalization of the welding manufacturing and as well as testing chain to enable a fully automated manufacturing as well as quality assessment of tubular nodes as key element of Jackets foundation structures. Furthermore, the relationship between the seam shape geometry and resulting fatigue strength is evaluated by numerical methods incorporating bionic principles. It is shown that tubular nodes can be welded fully automatically taking geometry tolerances into account. Moreover, the seam shape could be manufactured as requested by the numerical models which offers great potential for an extended lifetime. Subsequently, the improvements in resource efficiency and reduction of carbon dioxide emissions are evaluated by a life-cycle-assessment.
In additive manufacturing (AM) Laser Metal Deposition (LMD), parts are built by welding layers of powder feedstock onto a substrate. Applications for steel powders include forging tools and structural components for various industries. For large parts, the choice of tool-paths influences the build-rate, the part performance and the distortions in a highly geometry-dependent manner. With weld-path lengths in the range of hundreds of meters, a reliable, automated tool path generation is essential for the usability of LMD processes.
In this contribution, automated tool-path generation approaches are shown and their results are discussed for arbitrary geometries. The investigated path strategies are the classical approaches: “Zig-zag-” and “contour-parallel-strategies”. After generation, the tool-paths are automatically formatted into g-code for experimental build-up and ASCII for a numerical simulation model. Finally, the tool paths are discussed in regards to volume-fill, microstructure and porosity for the experimental samples.
This work presents a part of the IGF project 18737N “Welding distortion simulation” (FOSTA P1140)
In additive manufacturing (AM) directed energy deposition (DED), parts are built by welding layers of powder or wire feedstock onto a substrate with applications for steel powders in the fields of forging tools, spare parts, and structural components for various industries. For large and bulky parts, the choice of toolpaths influences the build rate, the mechanical performance, and the distortions in a highly geometry-dependent manner. With weld-path lengths in the range of hundreds of meters, a reliable, automated tool-path generation is essential for the usability of DED processes. This contribution presents automated tool-path generation approaches and discusses the results for arbitrary geometries. Socalled “zig-zag” and “contour-parallel” processing strategies are investigated and the tool-paths are automatically formatted into machine-readable g-code for experimental validation to build sample geometries. The results are discussed in regard to volume-fill, microstructure, and porosity in dependence of the path planning according to photographs and metallographic cross-sections.
To increase the competitiveness of jacket substructures compared to monopiles a changeover from an individual towards a serial jacket production based on automated manufactured tubular joints combined with standardized pipes has to be achieved. Therefore, this paper addresses fatigue tests of automatically welded tubular X-joints focusing on the location of the technical fatigue crack. The detected location of the technical crack is compared to numerical investigations predicting the most fatigue prone notch considering the structural stress approach as well as the notch stress approach. Besides, the welding process of the automated manufactured tubular X-joints is presented.
To increase the competitiveness of jacket substructures compared to monopiles a changeover from an individual towards a serial jacket production based on automated manufactured tubular joints combined with standardized pipes has to be achieved. Therefore, this paper ad-dresses the welding process of automated manufactured tubular X-joints. Additionally, fatigue tests of the automatically welded tubular joints are presented focusing on the location of the technical fatigue crack. The detected location of the technical crack is compared to numerical investigations predicting the most fatigue prone notch con-sidering the structural stress approach as well as the notch stress ap-proach.
To increase the competitiveness of jacket substructures compared to monopiles a changeover from an individual towards a serial jacket production based on automated manufactured tubular joints combined with standardized pipes has to be achieved. Therefore, this paper addresses fatigue tests of automatically welded tubular X-joints focusing on the location of the technical fatigue crack. The detected location of the technical crack is compared to numerical investigations predicting the most fatigue prone notch considering the structural stress approach as well as the notch stress approach. Besides, the welding process of the automated manufactured tubular X-joints is presented.
The development within the offshore wind energy sector towards more powerful turbines combined with increasing water depth for new wind parks is challenging both, the designer as well as the manufacturer of support structures. Besides XL-monopiles the jacket support structure is a reasonable alternative due to the high rigidity combined with low material consumption. However, the effort for manufacturing of the hollow section joints reduces the economic potential of jacket structures significantly. Therefore, a changeover from an individual towards a serial production based on automated manufactured tubular joints combined with standardized pipes must be achieved. Hence, this paper addresses the welding process chain of automated manufactured tubular joints including digitization of the relevant manufacturing parameters such as laser scanning of the weld seam geometry. Additionally, a methodology for the computation of the notch radius as well as the weld seam angle is presented based on the scanned profiles of three analysis points of an automated manufactured tubular X-joint. Subsequently, these parameters are considered within the notch stress approach based fatigue design and their impact is quantified by a comparison with the structural stress approach using equivalent stress concentration factors.
Zur Effizienzsteigerung beim Einsatz von Lichtbogenverfahren für Fügeaufgaben im Dickblechbereich werden häufig angepasste Verfahren mit möglichst geringer Nahtquerschnittsfläche angewendet, beispielsweise das MSG-Engspaltschweißen für I-Nähte. Die Herausforderung für die Automatisierung des Verfahrens besteht neben der komplexen Prozessführung auch in der oftmals schlechten Zugänglichkeit der Prozesszone für optische Sensorik, weswegen verstärkt auf prozessorientierte Sensorik zurückgegriffen wird. Zur Steigerung des Prozessverständnisses und Entwicklung neuer Regelungskonzepte wurde ein Versuchsaufbau umgesetzt, der sowohl optische Messsysteme als auch prozessorientierte Sensorik in einer gemeinsamen Steuerungsumgebung vereint. Die umfassende prozessbegleitende Sensorik ermöglicht die sukzessive Erweiterung des Prozesswissens, welches direkt zur Umsetzung neuer Steuer- und Regelalgorithmen basierend auf Regressionsmodellen genutzt werden kann. Der gemeinsame Einsatz optischer und prozessorientierter Sensorik wurde zur Auslegung eines Lichtbogensensors zur Höhenführung genutzt. Die Versuchsdurchführung mit dem Ziel der Ableitung nichtlinearer Regressionsmodelle erfolgt automatisiert mit Hilfe eines optischen Sensors. Der Vorteil dieses Verfahrens liegt dabei neben der schnellen Umsetzbarkeit in der direkten Korrelation der Messwerte zu realen physikalischen Systemgrößen und der schnellen Adaption auf unterschiedliche Schweißparameter und -prozesse.
Automatisierungs- und Regelkonzepte für das MSG-Engspaltschweißen - Pendel- und Füllgradregelung
(2018)
Das MSG-Engspaltschweißen eignet sich auf Grund der I-Nahtvorbereitung besonders für das wirtschaftliche Fügen bei hohen Blechdicken über 100 mm und bietet darüber hinaus zusätzliche technologische Vorteile. Für die automatisierte Anwendung des Verfahrens unter Produktionsbedingungen muss dabei die Prozesssicherheit auch für mitunter große Variationen der Spaltbreite entlang der Schweißnaht gesichert bleiben. In erster Linie betrifft dies bei mechanischer Auslenkung der Drahtelektrode die Adaption der Pendelbewegung auf die jeweilige Spaltbreite um eine ausreichende Flankenanbindung zu garantieren. Für die Online-Regelung der Pendelbewegung mittels Lichtbogensensorik wurde eine Methode implementiert die die notwendigen Pendelwinkel an jeder Nahtflanke unabhängig ermittelt und darüber hinaus Fehlstellungen des Brenners sowie Veränderungen des Kontaktrohrabstandes und der Prozessparameter eigenständig kompensiert. Eine Füllgradregelung auf Grundlage optischer Erfassung und Auswertung der Schweißnahtgeometrie wurde zusätzlich eingesetzt um bei veränderlichen Nahtquerschnittsflächen einen vorgegebenen, gleichbleibenden Lagenaufbau zu erzielen.
The present work deals with the development of a strategy for the prevention of end crater defects in high-power laser welding of thick-walled circumferential welds. A series of experiments were performed to understand the influence of the welding parameters on the formation of end crater defects such as pores, cracks, excessive root-side drop-through and shrinkage cavities in the overlap area. An abrupt switch-off of the laser power while closing the circumferential weld leads to a formation of a hole which passes through the whole welded material thickness. A laser power ramp causes solidification cracks which are initiated on the transition from full-penetration mode to partial penetration. Strategies with a reduction of the welding speed shows a creation of inadmissible root sagging. Defocusing the laser beam led to promising results in terms of avoiding end crater defects. Cracks and pores in the overlap area could be effectively avoided by using defocusing techniques. A strategy for avoiding of end crater imperfections was tested on flat specimens of steel grade S355J2 with a wall thickness of 10 mm and then transferred on the 9.5 mm thick pipe sections made of high-strength steel X100Q.
The present work deals with the development of a strategy for the prevention of end crater defects in high-power laser welding of thick-walled circumferential welds. A series of experiments were performed to understand the influence of the welding Parameters on the formation of end crater defects such as pores, cracks, root excess weld metal and shrinkage cavities in the overlap area. An abrupt switch-off of the laser power while closing the circumferential weld leads to a formation of a hole which passes through the whole welded material thickness. A laser power ramp-down causes solidification cracks which are initiated on the transition from full-penetration mode to partial penetration. Defocusing the laser beam led to promising results in terms of avoiding end crater defects. Cracks and pores in the overlap area could be effectively avoided by using defocusing techniques.
A strategy for avoiding of end crater imperfections was tested on flat specimens of steel grade S355J2 with a wall thickness of between 8 mm and 10 mm and then transferred on the 10 mm thick pipe sections made of high-strength pipeline steel API5L-X100Q.
Liquid metal embrittlement (LME) cracking can occur during resistance spot welding (RSW) in zinc-coated advanced high-strength steels (AHSS) for automotive production. In this study, a methodological variation of hold time is performed to investigate the process-related crack influence factors. A combination of numerical and experimental investigations confirms, that the extent of heat dissipation and re-heating of the sheet surface can be influenced and thus the degree of crack formation can be controlled in a targeted manner by the parameterisation of the hold time. The temperature and stress history of crack-free and crack-afflicted spot welds are analysed and a conclusion on the borders defining the LME active region is derived.
Die Weiterentwicklung des Laser-Pulver-Auftragschweißens im Bereich der additiven Fertigung stellt dieses Verfahren vor neue Herausforderungen.
Bauteile können schnell und endformnah hergestellt werden, was diese Technik für den Prototypenbau sowie Kleinserienfertigung interessant macht.
Die Vielzahl an Varianten, um ein Volumen aus einzelnen Schichten aufzubauen, erhöhen die Möglichkeiten die Eigenschaften des entstehenden Bauteils zu beeinflussen. Hierfür müssen Strategien entwickelt werden, welche einen gleiclunäßigen Materialauftrag bei gleichzeitig optimalen Materialeigenschaften gewährleisten.
Die durchgeführten Untersuchungen behandeln den Einfluss von Pendelstrategien sowie Spiralstrategien auf die Temperaturentwicklung und stellen diese vergleichend gegenüber. Um den unterschiedlichen Bedingungen bei der Bauteilfertigung Rechnung zu tragen, wurden Versuche in Randbereichen sowie im zentralen Bereich des Testobjekts untersucht. Die Ergebnisse verdeutlichen die Notwendigkeit angepasste Baustrategien zu entwickeln, um durch einen stabilen Fertigungsprozess Qualität und Eigenschaften eines Bauteils gewährleisten zu können.