Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (43) (entfernen)
Referierte Publikation
- nein (43)
Schlagworte
- Explosivstoffe (11)
- Explosives (8)
- BAM-Fallhammer (3)
- Marktüberwachung (3)
- Schlagempfindlichkeit (3)
- Friction sensitivity (2)
- Gefährdungsbeurteilung (2)
- Impact sensitivity (2)
- Qualitätssicherung (2)
- Reibempfindlichkeit (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (43)
Neues aus der Pyrotechnik
(2006)
The aim of this study is to quantify how much a real Fallhammer deviates from the idealised functioning, and what the differences between different Fallhammers in different laboratories are. Such a comparison has never been done and data have not been collected in a consistent way. Further it is the aim to develop guidance on the mechanical properties of the Fallhammer, which can be used for internal quality control, validation of the correct functioning of the Fallhammer, and preparation of Round-Robin tests. An established and verified mechanical status of a Fallhammer would greatly improve the quality and comparability of results and Round-Robin tests on the impact sensitivity of explosives.
Acilliary equipment used in the explosives sector is commonly not regulated by national or European law. Nonetheless various hazards are associated with electricity and radiation used by the equipment. Safety has to be guaranteed by a risk analysis and consequential handling provisions. The German approach is outlined.
Validierung von BAM-Fallhammer und BAM-Reibapparat - Herausforderung für die Qualitätssicherung
(2016)
Die Validierung des BAM-Fallhammers ist nicht nur eine Frage der dokumentierten Wartung und der Rückführbarkeit relevanter Größen sondern auch eine Frage der Verifizierung der mechanischen Funktion. Dabei gibt es zum Teil derart große Abweichungen zwischen Geräten und von berechneten Werten, dass Ergebnisse zur Schlagempfindlichkeit von Explosivstoffen nur in Verbindung mit der verifzierten Funktion und verifizierten Werten zum Energieübertrag auf den zu prüfenden Stoff nutzbar sind.
Mit einem Raman-Handgerät wurden verschiedene Explosivstoffe, wie sie gewerblich Verwendung finden und im Fachbereich 2.3 verfügbar waren, analysiert. Nicht zu allen Stoffen sind Raman-Spektren in der Literatur auffindbar. Durch die Veröffentlichung der Arbeit in einer Fachzeitschrift sollen Kriminalämter und Wissenschaftler in die Lage versetzt werden, aufgefundene Explosivstoffe schnell zu identifizieren.
Several decades have passed since the initial drafting of the European standards for explosives subject to European Directive 2014/28/EU, and this field as experienced some substantial technical innovations. While at the turn of the millenium the concept of electronic detonators had just been conceived, and it is mentioned in a Technical Specification, today electronic detonators exist in many variants, also regarding communication means between shotfirer and the detonating cap. Questions regarding safe functioning and prevention of inadvertent ignition have to be asked in a quite different way, where delicate electronic circuits are used, and where information is transmitted by radio waves. In addition, the safety of functioning is partly found in software components and the corresponding standards need to be reviewed thoroughly on these grounds.
A different but in recent times more and more popular technology, is the on-site production of explosives, being mostly emulsion explosives, ANFO, or combined products. Also here software in the machinery is starting to play an important role. The on-site produced explosive must fulfil safety requirements and has to be, in addition, quality controlled. This cannot solely be left to the hopefully proper design of the software and machinery, but needs to be made accessible to verification. Since this area seems broader in approach, it is not going to be addressed by a new standard. The state of the art technology shall be described in a Technical Specification with a perspective from requirements of the above mentioned European Directive.
Mit der Richtlinie 2008/43 wurde europaweit ein System zur Rückverfolgung von Explosivstoffen von Herstellung bis zum Verbrauch geschaffen. Dabei erhält jeder Zünder und jede Sprengstoffpatrone eine eindeutige Kennung, die üblicherweise als Datamatrix-Code aufgebracht wird. Seit 2015 muss das System angewandt werden. Trotz einer reichlichen Übergangsfrist gibt es immernoch Probleme im Detail, die sich vor allem auf die IT-mäßige Verarbeitbarkeit beziehen.
Bei der Marktüberwachung im Bereich Explosivstoffe und Pyrotechnik stehen die Behörden der Länder immer wieder vor dem Problem, mit ausreichenden Kenntnissen über die Vielfalt der Produkte ausgestattet zu sein. Darüber hinaus lassen sich nur in seltenen Fällen im Rahmen der Marktüberwachung Prüfungen mit der regulären Funktion des Explosivstoffs oder der Pyrotechnik durchführen. Dadurch konzentriert sich die Überwachung vor allem auf äußere Merkmale und die Kennzeichnung. In dem Vortrag werden anhand von Beispielen die technischen und rechtlichen Hintergründe für entsprechende Kontrollen dargestellt und mit den Erfahrungen der an der Marktüberwachung Beteiligten abgeglichen.
This is a short review on ongoing work and interests in Division 2.6 of BAM with a focus on transport regulations and related testing. The behaviour of primer caps in different packaging configurations is addressed and the new apparatus for the "Minimum Burning Pressure" test is presented. Further topics regarding classification are touched with the aim to attract comments and stimulate cooperation internationally.
Examinations of the mechanical properties of the BAM drop hammer and the BAM friction test were done recently. In order to validate the correct functioning of both tests, usually Round-Robin tests are done with selected test substances. A relatively large spread of the results including some outliers is usually accepted and attributed to the nature of the tests. The author asked, however, in how much the mere mechanical properties could already differ between different institutes, even when no substance is involved (dry runs). A thorough inter-laboratory study was done for the drop test, and results for the friction test are on its way. The current state of these investigations will be presented.
Controlling the hazards in explosives manufacture has been addressed ever since such substances have entered industrial processing. The rigour of exercising such control appears to vary in different fields of application (fireworks versus blasting explosives) and in different countries worldwide. Nonetheless, each tradition has developed a set of standard tests addressing sensitivity and other aspects of behaviour of explosives. With a full system of workers protection in place in most countries nowadays, the control of hazards in explosives manufacture has become much more formalised. The paper aims to show the common parts of process hazard analysis and the consequential steps involving either a risk based approach or a prescriptive approach. The paper aims to stimulate discussions about recent developments.
This presentation shall outline the regulatory tools for explosives manufacture in force in Germany and emphasize the benefits of a codified approach. Those in the need of applying safety measures find a given set of prescriptions, which do not need to be determined through a case by case study. While a process hazard analysis is usually required, it is not necessary to perform a risk analysis.
The system is likely to be more conservative than others, because it generalizes the application cases and needs to be valid for all variations within the description. It is also conservative in that respect that, from learning from previous accidents, for each case a conclusion improving safety entered the code. The more recent history of events shows that the system provides excellent protection of workers in this field. In addition it gives all operators a safe backup for their activity, since following the code generates the "presumption of conformity" and makes juridical judgement more straight forward.
A joint Round Robin test was initiated by the "explosives testing user group" involving all renowned test institutions of the USA plus The Netherlands (TNO) and Germany (BAM). Aim of the Round Robin test was not only to align results with regard to the friction sensitivity of a given powder sample, but also to study the variations of GO and NO-GO reactions by high speed camera recordings.
Bei der Betrachtung der Rechtmäßigkeit von Explosivstoffen und pyrotechnischen Gegenständen mit CE-Zeichen auf dem Gemeinschaftsmarkt der EU wird oft der Baumusterprüfung und der "Baumusterprüfberscheinigung" große Aufmerksamkeit geschenkt. Bei pyrotechnischen Gegenständen kommt hier noch die Registriernummer als überprüfbares Merkmal hinzu. In der Phase der Baumusterprüfung werden die anwendungstechnischen Eigenschaften und Anforderungen der harmonisierten Normen geprüft, wofür eine der prüfenden benannten Stellen der EU die Verantwortung hat.
Für die sichere Funktion und Leistung von Explosivstoffen und pyrotechnischen Gegenständen ist jedoch die in der, oder im Anschluss an die, Fertigung stattfindende Qualitätssicherung (QS) mindestens ebenso wichtig. Ohne Einhaltung eines der Qualitätssicherungsmodule findet keine rechtmäßige Abgabe auf den Gemeinschaftsmarkt statt. Unkorrekte Anwendung der QS führt i. d. R. auch zu Fehlern an den Produkten mit mehr oder weniger auffälligen Problemen.
In der Vergangenheit konnte die Marktüberwachung aus dem Anzeigeverfahren für die erstmalige Verwendung von Explosivstoffen und pyrotechnischen Gegenständen und den dabei geführten Listen Anhaltspunkte bzgl. der Rechtmäßigkeit gewinnen und ggf. bei der BAM weiterführende Informationen abfragen. Mit dem Wegfall der Anzeigepflicht nach § 6 der 1. SprengV und dem Wegfall dieser Informationsquelle muss sich die Überprüfung von Explosivstoffen und pyrotechnischen Gegenständen auf dem Markt und in Lagern auf die begleitenden QS nach einem der Module der jeweiligen Richtline konzentrieren.
In dem Beitrag werden Kennzeichnungsmerkmale und Möglichkeiten der Überprüfung der QS an Explosivstoffen und pyrotechnischen Gegenständen aufgezeigt. Teilnehmer der Marktüberwachung und anderer Aufsicht führenden Stellen sollen sensibilisiert werden und mit Informationen ausgestattet werden, die ihnen ein Handeln auf diesem Gebiet ermöglichen.
Bericht von der Tätigkeit der benannten Stellen für Explosivstoffe, neue Normungsprojekte bei CEN
(2018)
Es sollen von der EU über CEN neue Normungsprojekte lanciert werden, die sich mit elektronischen Funk- und Fernzündsystemen in der Sprengtechnik und mit den speziellen Anforderung an vor-Ort hergestellte Sprengstoffe mit entsprechenden mobilen Produktionseinheiten befassen. Hierzu ist die Mitwirkung der Industrie und der Anwender gefordert, damit die Normen technische Fragen adäquat abdecken. Ziel ist letztlich die Harmonisierung vor der Explosivstoffrichtlinie 2014/28/EU. In diesem Zuge wird über die Tätigkeit der benannten Stellen für Explosivstoffe berichtet.
Testing of the impact sensitivity of explosives is one of the essential characterisation steps in a safety study. Threshold levels have been agreed from experience for certain processing steps and in relation to handling instructions. However, how reliable is the information, that an explosive has an impact sensitivity of X Joule? This will partly depend on the judgement of the test operator, but also on the statistical method, and on the energetic parameters of the test apparatus. This work focuses on the mechanical performance of the BAM-Fallhammer and how much of the initially available potential energy is transferred to the sample. The differences to the nominal value can be quite large under some conditions. Therefore the energy loss has to be characterised and should possibly be taken into account. In addition an attempt is made, to make results more comparable when the amount of energy loss has been determined by a method shown in the presentation.
During a European convention of the authorities for market surveillance (AdCO) for explosives the activities of the notified bodies are presented, putting a focus on matters concerning market surveillance.
The presentation outlined in detail, which verifications are possible
with explosives, while practical tests involving initiation of
explosives are excluded. Elements of labeling and the conclusions in
view of quality control were explained, and typical failures by
manufacturers to comply were orally described.
Permitted explosives have a tradition of many decades in Germany and had been designed to the needs of the underground coal mining in the Ruhr. In neighboring countries of Germany similar provisions were made to prevent hazards from fire damp and coal dust explosions in underground coal mines. Due to the termination of coal mining in Germany and most other European countries, also the testing facilities are disappearing. This presentation outlines the current situation of testing regimes and facilities.