Filtern
Dokumenttyp
Referierte Publikation
- ja (8)
Schlagworte
- Mechanochemistry (3)
- Electron diffraction (2)
- Metal phosphonate (2)
- Polyelectrolyte (2)
- ADT (1)
- Amorphous Zinc phosphate (1)
- Amorphous materials (1)
- Cobalt (1)
- Hydrates (1)
- In situ (1)
Organisationseinheit der BAM
Zinc phosphate, an important pigment in phosphate conversion coatings, forms protective films on rubbing surfaces.
We have simulated the underlying reactions under shear by ball-milling zinc phosphate and monitored the reaction of hopeite (Zn3(PO4)2·4H2O) and the retarded recrystallization of the amorphous reaction product by powder X-ray diffraction (PXRD) and quantitative infrared (IR) spectroscopy. Abrasion of stainless steel was simulated by addition of pure 57Fe. The results provide insight into the chemistry of phosphate conversion coatings or during battery cycling of metal phosphates and give theoretical guidance for the preparation of amorphous phosphates. Thermal analysis revealed that the release of structural water is a key step during the reaction of hopeite under shear to ball-milled amorphous zinc phosphate. The back-reaction and associated recrystallization kinetics of amorphous zinc phosphate show a classical Langmuir behavior. Fe impurities inhibit the recrystallization of ball-milled amorphous zinc phosphate strongly. 57Fe Mössbauer spectroscopy and PXRD revealed that Fe is oxidized to Fe2+ and Fe3+ during ball-milling and incorporated locally at the tetrahedral and octahedral sites of the structure. Ball-milled amorphous zinc phosphate is metastable as γ-Zn3−xFex(PO4)2. EPR studies showed the incorporation of Fe3+ to be coupled with the formation of Zn2+ vacancies. The Fe3+ defect sites bind water because of their higher Pearson hardness (compared to Fe2+ and Zn2+), thereby reducing water mobility and inhibiting further reactions like the recrystallization to hopeite. Our findings reveal the amorphization mechanism of Zn3(PO4)2·4H2O in stainless steel ball mills at the atomic scale and highlight how the reactivity of amorphous products is affected by impurities associated with the processing method.
Divalent metal phosphonates are promising hybrid materials with a broad field of application. The rich coordination chemistry of the phosphonate linkers enables the formation of structures with different dimensionalities ranging from isolated complexes and layered structures to porous frameworks incorporating various functionalities through the choice of the building blocks.
In brief, metal phosphonates offer an interesting opportunity for the design of multifunctional materials. Here, we provide a short review on the class of divalent metal phosphonates discussing their syntheses, structures, and applications. We present the advantages of the recently introduced mechanochemical pathway for the Synthesis of divalent phosphonates as a possibility to generate new, in certain cases metastable compounds. The benefits of in situ investigation of synthesis mechanisms as well as the implementation of sophisticated methods for the structure analysis of the resulting compounds are discussed.
The crystal structures and syntheses of four different copper(II) phenylphosphonates, the monophenylphosphonates α-, β-, and γ-Cu(O3PC6H5)·H2O (α-CuPhPmH (1) β-CuPhPmH (2) and γ-CuPhPmH (3)), and the diphosphonate Cu(HO3PC6H5)2·H2O (CuPhP2mH (4)), are presented. The compounds were synthesized from solution at room temperature, at elevated temperature, under hydrothermal conditions, and mechanochemical conditions. The structures of α-CuPhPmH (1) and CuPhP2mH (4) were solved from powder X-ray diffraction data. The structure of β-CuPhPmH (2) was solved by single crystal X-ray analysis. The structures were validated by extended X-ray absorption fine structure (EXAFS) and DTA analyses. Disorder of the crystal structure was elucidated by electron diffraction. The relationship between the compounds and their reaction pathways were investigated by in situ synchrotron measurements.
The nature of the bound water in solids with hydrogen-bonded networks depends not only on temperature and pressure but also on the nature of the constituents. The collapse and reorientation of these network structures determines the stability of hydrated solids and transitions to other crystalline or amorphous phases. Here, we study the mechanochemically induced loss of bound water in Co₃(PO₄)₂·8H₂O and compare this process to the behavior under hydrostatic pressure.
The associated phase transition and its kinetics were monitored by X-ray powder diffraction with Synchrotron radiation and quantitative IR spectroscopy. High shearing forces are responsible for the degradation of the hydrogen-bonded network and the concomitant crystalline–amorphous transformation. UV/Vis spectroscopy, extended X-ray absorption spectroscopy (EXAFS), and X-ray absorption near-edge spectroscopy (XANES) provided information about the short-range order in the amorphous solid, and thermal analysis revealed its composition and showed that the moderate charge densities of the Co²⁺ and PO₄³⁻ ions, which make the hydration enthalpy comparable to the binding energy of the counteranions, and the Formation of hydrogen-bonded networks favor multistage crystallization processes associated with the release and uptake of coordinated water. The changes of the Co²⁺ coordination induce a color change from pink to blue; therefore, Co₃(PO₄)₂·8H₂O can be used as an overheat temperature indicator.
Thermal decomposition of Zr(C2O4)2·4H2O within an autoclave or in a conventional tube furnace at temperatures below 380 °C resulted in nano- and micron-sized ZrO2, respectively. Reactions under autogenic pressure yielded monodisperse monoclinic (m) and tetragonal (t) ZrO2 nanoparticles with an average diameter of ~8 nm and interconnected t-ZrO2 nanoparticles with diameters of ~4 nm, depending on the synthesis temperature. Samples were characterised by X-ray diffraction (XRD), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) associated with energy dispersive X-ray spectroscopy (EDS), Raman microspectroscopy and photoluminescence spectroscopy (PL). Nanostructured zirconia materials exhibited high specific areas of 276–385 m2 g-1 which make them promising candidates as catalysts and catalyst supports. Co-existence of m- and t-ZrO2 nanoparticles with diameters of 6–9 nm, i.e. above the critical particle size of 6 nm for the formation of t-ZrO2, demonstrated that the particle size is not the only factor for stabilisation of the t-ZrO2 modification at room temperature.
The use of Automated electron Diffraction Tomography (ADT) is presented as a novel approach for crystallization studies at the nanometer scale for nonequilibrium phases. Here, ADT was applied to elucidate the structural identity of the recently reported hexagonal morphology of caffeine crystals, which grow only on specific surfaces. Caffeine was crystallized from solution on a specially treated TEM carbon grid. The analysis of ADT data revealed that the lattice parameters of these hexagons match those of the high temperature α-form of caffeine. Furthermore, it was observed that in this hexagonal morphology, the α-form remained stable for a prolonged period of time. The stabilization of hexagons can be interpreted in terms of enhanced interactions with the supporting surfaces.
Polystyrene sulfonate - porphyrin assemblies: influence of polyelectrolyte and porphyrin structure
(2011)
In this study, electrostatic self-assembly of different polystyrene sulfonates and a set of tetravalent cationic porphyrins is investigated. It is shown that association of linear polystyrene sulfonates of different molar masses yields finite size nanoscale assemblies that are stable in aqueous solution. Aggregates are compared to the ones of cylindrical brushes, revealing that both form assemblies in the 100 nm range with the charge ratio (molar ratio of porphyrin charges to polyelectrolyte charges) being determining, while the morphology of the resulting network-like assemblies is different for both polyelectrolyte architectures. For the smallest 8k polystyrene sulfonate, in addition, stoichiometric conditions differ. The influence of the molecular porphyrin structure was investigated by comparing meso-tetrakis(4-(trimethyl-ammonium)phenyl)porphyrin (TAPP) with its Cu(II) and Zn(II) loaded analogues and meso-tetrakis(4-N-methylpyridinium)porphyrin (TMPyP), revealing differences in stacking tendency and geometry. Additionally, the TMPyP accumulates more in the inside of the brush than the other porphyrins, likely due to the different position of its charged groups. The supramolecular nanostructures formed were characterized by UV–vis spectroscopy, light scattering, atomic force microscopy, cryo transmission electron microscopy, and small-angle neutron scattering. Results may build a valuable basis for the use of polyelectrolyte–porphyrin assemblies in medicine, catalysis, or energy conversion.
Self-assembly of Fe(II) and the ditopic ligand 1,4-bis(2,2':6',2"-terpyridine-4'-yl)benzene results in equilibrium structures in solutions, so-called metallosupramolecular coordination polyelectrolytes (MEPEs). It is exceedingly difficult to characterize such macromolecular assemblies, because of the dynamic nature. Therefore, hardly any structural information is available for this type of material. Here, we show that from dilute solutions, where small aggregates predominate, it is possible to grow nanoscopic crystals at an interface. A near atomic resolution structure of MEPE is obtained by investigating the nanoscopic crystals with electron diffraction in combination with molecular modeling. The analysis reveals a primitive monoclinic unit cell (P21/c space group, a = 10.4 Å, b = 10.7 Å, c = 34.0 Å, α = γ = 90°, β = 95°, ρ = 1.26 g/cm³, and Z = 4). The MEPE forms linear rods, which are organized into sheets. Four sheets intersect the unit cell, while adjacent sheets are rotated by 90° with respect to each other. The pseudooctahedral coordination geometry of the Fe(II) centers is confirmed by Mössbauer spectroscopy. The combination of diffraction and molecular modeling presented here may be of general utility to address problems in structural materials science.