Filtern
Dokumenttyp
- Zeitschriftenartikel (2)
- Vortrag (2)
- Beitrag zu einem Tagungsband (1)
- Sonstiges (1)
Schlagworte
- Phase analysis (6) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (2)
The multi-phase approach has proven to widen the application properties of high entropy alloys. After a decade of testing different alloys in the Al-Co-Cr-Cu-Fe-Ni-Ti family the Al10Co25Cr8Fe15Ni36Ti6 was found to be a solid base for more fine-tuned microstructural optimization. Following the example of superalloys, the Al10Co25Cr8Fe15Ni36Ti6 alloy aims for a γ/γ' microstructures in order to guarantee a good microstructural stability at high temperatures. The shape and volume fraction of the γ' particles is known to influence the mechanical properties of superalloys, and they do so in the high entropy family as well [1]. Shape, misfit and creep properties of several modified versions of the Al10Co25Cr8Fe15Ni36Ti6 alloy are compared and discussed in this talk.
The accurate EDS microanalysis of light elements such as boron and carbon by spectrum imaging will be demonstrated using a sintered hard ceramic material composed of the three major phases titanium boride (TiB2), titanium carbide (TiC), silicon carbide (SiC) and minor phases, sub-μm in size.
The combination of these three materials leads to improved mechanical and tribological properties. Silicon carbide is a material used for mechanical seals. It has the disadvantage of reduced failsafe running functions, causing increased wear when running dry. The added titanium components (TiC and TiB2) improve the failsafe running functions. This technology has already been transferred to industrial applications.
Cementitious materials, in particular concrete, are durable materials if prepared appropriately and the Service life of concrete structures is now often required to last 120 years or more. Concrete durability depends strongly on intrinsic (e.g. composition, porosity) and exterior factors (e.g. moisture condition and composition, frost cycles, load pattem). Deleterious actions leading to concrete degradation are often created by the environment. Extemal sulfate attack is one of the more spectacular damage scenarios for concrete structures caused by the ingress of sulfate ions into the pore System of the material and successive formation of expanding phases. Though in recent years well studied there are still many questions remaining conceming the mechanisms of sulfate attack. In particular over the last ten years, with the increased utilization of blended cements, new questions arose concerning the sulfate resistance of those binder Systems. In the presented study therefore a method was developed to analyze the changes of the phase composition within the micro structure due to sulfate attack. The analytical method was based on pX-Ray diffraction (pXRD) using Synchrotron radiation in Debye-Scherrer (transmission) geometry. The spatial resolution of the method is ca. 10 pm and allows the characterization of phase transformations in the wake of damaging processes in more detail compared to other techniques. Furthermore, the experimental setup provides the possibility for analyzing the phase assemblage of a given sample without destroying the micro structure. This is possible because the specimens for phase analysis consists of thick sections, which can be used for further microscopic analysis of the micro structure and micro chemistry (e.g. by SEM-EDX). Samples containing supplementary cementitious materials were measured in comparison and to reconstruct the influence of the degradation process in detail. Additionally, reaction ffonts within the samples were localized by micro x-ray fluorescence analysis (MXRF).
Characterization of reflector types by phase-sensitive ultrasonic data processing and imaging
(2008)
Ultrasonic and radar imaging techniques are limited in resolution by the wavelength in the material, yet information beyond those limits is hidden in complex frequency dependent reflection coefficients. The analysis of the phase of complex reflection coefficients together with the properties of imaging algorithms can help to characterize and to classify indications of defects in concrete buildings. This paper describes a method to extract phase information from measurements and SAFT reconstructed images. The influencing factors like material properties, transducer characteristics, and imaging algorithms based on Born or Physical Optics approximations are elaborated. Simulated and experimental results are briefly discussed.
Für die zerstörungsfreie Prüfung großer Betonbauwerke unter dem Aspekt der Analyse von Spannkanälen hat sich die Ultraschalltechnik in den letzten Jahren als geeignete Methode herausgestellt, da sowohl die Messtechnik insbesondere die Ultraschallwandler als auch die numerischen Auswerteverfahren in einem Stadium sind, das es erlaubt, größere Messflächen und damit größere Volumina zu beschallen und abzubilden. Mit Hilfe der Modellierung der Ausbreitung elastischer Wellen in komplexen Medien können praxisrelevante Problemstellungen untersucht werden, auch unter dem Aspekt, Testkörper zu planen oder gar zu ersetzen. Durch die Auswertung der Phase der Rekonstruktion eines Streuvorgangs können Fehlstellen klassifiziert und damit Aussagen über die Bauwerkssicherheit signifikant objektiviert werden. Die Methoden werden, im Hinblick auf eine ganzheitliche Sichtweise von skalaren und polarimetrischen Abbildungsverfahren mit Unterstützung der Modellierung und der anschließenden Klassifizierung durch Phasenanalyse, an ausgewählten Beispielen erläutert.
For nondestructive testing of concrete buildings under the aspect of tendon duct analysis, ultrasonic testing has proven to be a suitable method, as both the measuring technique in particular the acoustic sensors and the numerical methods allow the insonification and imaging of larger surfaces and volumes. With the aid of numerical modelling of elastic wave propagation in complex media real life problems can be examined with the goal to design or even to replace test specimen. By determination of the phase of an imaged scattering event, defects can be classified, and the prediction of the integrity of buildings can be significantly objectified. The methods are explained for selected examples in an integral way with respect to scalar and polarimetric imaging algorithms supported by modelling and subsequent classification through phase analysis.