Filtern
Dokumenttyp
- Beitrag zu einem Sammelband (1)
- Vortrag (1)
Sprache
- Englisch (2)
Referierte Publikation
- nein (2)
Schlagworte
- Aluminium Alloys (2) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
The residual stresses and load transfer in multiphase metal alloys and their composites (with both random planar-oriented short fibers and particles) will be shown, as studied by neutron diffraction, by X-ray computed tomography, and by a model based on the reformulation of classic Maxwell’s homogenization method.
Contrary to common understanding and state-of-the-art models, we experimentally observe that randomly oriented phases possess non-hydrostatic residual stress. Moreover, we disclose that the unreinforced matrix alloy stays under hydrostatic compression even under external uniaxial compression.
The recently developed modeling approach allows calculating the residual stress in all phases of the composites. It rationalizes the presence of deviatoric stresses accounting for the interaction of random oriented phases with fibers having preferential orientation. It also allows the explanation of the unconventional in-situ behavior of the unreinforced alloy and the prediction of the micromechanical behavior of other similar alloys.
Earlier work has established that a critical amount of 4043 filler is required to avoid solidification cracking when arc-welding 6060 aluminium, depending upon local strain conditions. For example, when the mushy zone behind the weld pool experiences a tensile strain from combined thermal and shrinkage stresses, the possibility exists for crack initiation. For a greater rate of strain, it has been determined that a greater 4043 dilution (i.e. higher weld metal silicon content) is required to avoid crack initiation. Making use of the Controlled Tensile Weldability (CTW) test and local strain extensometer measurements, a boundary has been established between crack and no-crack conditions for different local strain rates and filler dilutions, holding all other welding parameters constant. Using this established boundary as a line of reference, additional parameters have now been examined and their influence on cracking has been characterized. These parameter influences have included studies of weld travel speed, weld pool contaminants (Fe, O, and H), and grain refiner additions (TiAl3 + Boron). Each parameter has been independently varied and its effect on cracking susceptibility quantified in terms of a critical strain rate required to initiate cracking for a given 4043 filler dilution.