Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (21)
Referierte Publikation
- ja (21) (entfernen)
Schlagworte
- Cultural heritage (21) (entfernen)
Organisationseinheit der BAM
The cleaning of aged silk fibers poses a common challenge in the conservation of textiles, since traditional cleaning techniques often yield unsatisfactory results or even harm objects. In this regard, cleaning objects with laser radiation is a promising addition to the range of available methods. Due to it being contactless, even brittle and touch-sensitive objects with disfiguring or harmful soiling could potentially be cleaned and therefore made accessible for research and presentation. Examples of treatment have sometimes shown spectacular results. Still there is some skepticism concerning the safety of this treatment for textile materials, which has been strengthened through previous 532 nm wavelength nanosecond laser cleaning studies on silk fibers. Taking these published results into account, the range of examined laser parameters has been extended in this study, from 532 nm nanosecond laser to 1064 nm nanosecond and even 800 nm femtosecond laser, reevaluating the effect of this treatment on the fibers. The physicochemical processes taking place on the silk fibers when cleaning with lasers are complex and still not fully understood. The aim of this project was therefore to bring more clarification about potential effects of those processes on the condition of silk samples treated with a set of different parameters for wavelength, pulse duration, energy density and number of pulses per spot. It also looks at the influence of the presence of soiling on the results. The analysis of potential effects was then carried out using statistical methods and advanced analytics. Scanning electron microscopy, Fourier-transform infrared spectroscopy and colorimetry technology provided the required insights to better assess the effects. Results show that laser cleaning of silk fibers, like most other conventional cleaning techniques, is not completely without risk, but knowing what the possible effects are helps making decisions on whether the benefits of the technique used justify these risks.
Larvae and adults of Korynetes caeruleus (de Geer 1775) (Coleoptera: Cleridae) were collected from old churches and reared in the laboratory on Anobium punctatum (de Geer 1774) (Coleoptera: Ptinidae). Breeding success of K. caeruleus was low, but basic parameters of this species’ developmental cycle were identifi ed. At 21°C and 75% relative humidity and a fourmonth cold period at 4°C, the development of K. caeruleus from egg to adult appearance lasted 2 years. The pupal stage may be reached and completed after one and a half years. Feeding on larvae of A. punctatum by larvae of K. caeruleus was observed and consisted of a combination of sucking haemolymph and consuming body parts. The sickle-like mandibles of larvae of K. caeruleus penetrate the cuticle of prey larvae; this is followed by pumping and sucking body movements. Adult beetles of A. punctatum were not attacked by K. caeruleus larvae. Feeding behaviour of adult K. caeruleus was not investigated.
The International Qumran project conducted at the BAM Federal Institute for Materials Research and Testing in 2007–10 aimed at establishing an optimal methodology for an accurate characterization of the Dead Sea Scrolls to address such questions as archaeological provenance, origin, and attribution of fragments to a specific sheet (Rabin 2013). Using equipment of various degrees of complexity we have shown that part of the historic information stored in the material can be revealed by proper characterization of the material. The on-site investigation of the Dead Sea Scrolls fragments from The Schøyen Collection in October 2012 offered the first chance to test this methodology in a field study. For the first time, we used mobile and non-invasive technology exclusively, since we could not transport all of our laboratory equipment to Norway for this project. Moreover, besides the technical limitations dictated by the available equipment, we had to cope with limited time: it was impossible to perform the number of scans required for optimal characterization of over 30 fragments within the fourteen days available. Nevertheless this study presents an important step in the material analysis of the Dead Sea Scrolls, since the devices we used are easily transportable, well known, and easily accessible throughout the world.
We have obtained a minute amount of dry ink scratched from the bronze inkwell MS 1655/2. The powder was stored between two glass slides to minimize contamination. For micro analysis by FTIR a sample of the ink powder was transferred into a diamond cell while for confocal Raman spectroscopy a micro sample was placed onto sticky tape. The same portion of the sample was also investigated by scanning electron microscopy, where the elements distribution was determined by EDX.
The aim of our work was to check whether the assumption that the jar was discovered in Qumran can be substantiated. In order to establish the archaeological provenance of the jar we conducted a series of analytical tests on samples of material collected from the jar in April and June 2009. The samples were either found loose within the jar, these being probably constituted by remnants of its original contents, or were clay detached from the inner and outer surface of the jar. In addition, a portion of sand deposit coating the inside of the jar handles was analysed.
Light damage to selected organic materials in display cases: A study of different light sources
(2016)
The protection of works of art and cultural assets against light-induced aging is vital when planning exhibitions. Newly developed lighting systems render the selection of suitable light sources more difficult, not least in the context of energy–economical systems. This study accordingly examines different lighting systems (fluorescent tubes, halogen lamps, low-voltage metal halide lamps, and LED lamps) in terms of the damage potential they hold for the materials concerned. The changes in color were evaluated using the CIEDE2000 color-difference formula. This study focuses on selected organic materials and shows that changes in color already occur after only a brief exposure time. The color changes induced by the fluorescent tubes were consistently more intense than those induced by the other light sources. The results obtained with the remaining lamps show that the color changes depend more on the material under investigation than on the source used. The changes determined after a relatively short exposure period (five months) vividly demonstrate that exposing sensitive materials to light for longer terms (as is the case during a permanent exhibition) is most definitely a non-viable option.
Wooden artworks residing in churches for centuries inevitably suffered from decaying processes such as Wood worm infestation. About 100 years ago, this process was ceased with a polluting coal tar extract 'Carbolineum', a treatment usually applied to railway sleepers. Nowadays, this lead to undesired effects not only of causing dark stains on the surface of the treated sculptures but also in unimpaired release of traces of harmful substances into the atmosphere perceptible as the typical smell of coal tar oil. To resolve this problem, the knowledge of the internal structure could provide a support for this effort. As an example, sculptures from an epitaph in a church in northern Germany were subjected to X-ray and neutron computed tomography (CT). The purpose of using neutrons was to get information about the distribution of the impregnant Carbolineum. It consists of a mixture of polycyclic aromatic hydrocarbons which should increase the absorption of neutrons. In contrast, X-rays are rather poorly absorbed by such substances as compared to the wood matrix. All radiographic approaches
revealed traces of previous conservation measures that were not always documented in detail. Comparing the neutron images with those from the X-ray interrogation some differences became obvious indicating varied material compositions. Nails e.g. were clearly visible in the X-ray images rather than in the neutron ones. Some less visibly stained parts of the sculptures correspond with obviously replaced materials in the inside. These results will be used to identify ways how to treat the infested artworks.
For assessing building façades using active thermography, in case of direct solar exposure the sun itself can be used as heat source. It is shown that active thermography can be applied to large areas successfully, if a shadow cast occurs. After performing a sequence reconstruction in order to correct the temporal behaviour of shadow movement, the data could be analysed by pulse phase thermography (PPT). Compared to raw thermograms, the obtained phase images display an improved image quality with a lot of details. The frequency of the phase images is related to the probing depth. The presented case study describes the thermographic investigation of an historical building façade, where an area of 17 m x 13 m has been investigated.
The qualitative and quantitative investigation of historical writing materials using micro-X-ray fluorescence analysis (micro-XRF) is a suitable method for obtaining information about the chemical composition of these materials. One the one hand these chemical composition fingerprints may answer some questions concerning the provenance of different materials, the chronology of their use, and give furthermore, the possibility to date unknown fragments in the lifework of an artist. On the other hand this method might be useful for the development and validation of conservation treatments.
In this work, the applicability of a new 3D micro X-ray fluorescence (3D Micro-XRF) laboratory spectrometer for the investigation of historical glass objects is demonstrated. The non-destructiveness of the technique and the possibility to measure three-dimensionally resolved fluorescence renders this technique into a suitable tool for the analysis of cultural heritage objects. Although absorption and resolution effects complicate qualitative analysis of the data, layered structures can be distinguished from homogeneous samples without the need for full quantification. Different manufacturing techniques were studied in this work with the help of hand-made reference samples. With the gained knowledge it could be shown for the investigated historical glass object, that black enamel as a stained glass contour colour was used in a cold painting. The object was not fired after the application of the black enamel, but instead the adhesion of the paint was solely provided through organic binding agents and the backing with metal foils. Thus, for the manufacturing of the object, a mixture of cold painting technique with a stained glass color was used. Quantitative measurements with a 3D Micro-XRF setup at the Berlin synchrotron BESSY II confirm the assumptions drawn on the basis of the qualitative investigation with the 3D Micro-XRF spectrometer with X-ray tube excitation.
Fe K-edge XANES measurements were performed to determine the oxidation state of iron in iron gall inks. These data are used to investigate the relationship between the Fe oxidation state and ink corrosion in historical manuscripts. The oxidation state is determined using the pre-edge based on a general variation trend that was derived from model compounds and validated here independently on a suite of samples with known oxidation state and Fe in octahedral coordination (i.e. similar to Fe in gall ink). As long as suitable references for the pure ferric and ferrous state of iron gall inks cannot be pointed out, the analysis of the pre-edge of the Fe K-edge represents the only way to acquire absolute values for the Fe oxidation state (Fe3+/Fetot) with spatial resolution for this usually non-crystalline compound. Fe3+/Fetot values for the ink samples vary between ca. 0.7 and 1.0. Spatially resolved analyses performed across ink strokes of various historical manuscripts as well as newly made samples did not reveal any systematic spatial dependence. On average, historical samples that were exposed to conservation treatments show a more oxidized state. However, the measurements demonstrate explicitly that the exposure to X-rays during the XANES acquisition affects the oxidation state of Fe in most iron gall inks.
The determination of water and salt distribution in brickwork and stonework is a frequent problem in cultural heritage protection. Conventional but reliable methods are usually based on the investigation of core samples and provide only punctual information. To avoid the destruction of valuable building fabric, a non-destructive approach using a combination of investigation methods is needed. A case study, demonstrating the possibilities of almost non-destructive testing methods and their combination is presented in this article.
The investigation of an ancient Chinese ceramic served to further develop and validate fundamental parameter-based quantitation procedures in reference-free x-ray fluorescence (XRF) analysis. The XRF measurements of this sample were performed at the four-crystal monochromator beamline of the Physikalisch-Technische Bundesanstalt (PTB) at the BESSY II synchrotron radiation facility employing different excitation energies. The parallel processing of the XRF spectra recorded at different excitation energies provides a means to simultaneously evaluate relevant fundamental parameters and secondary enhancement processes such as those induced by photoelectrons. Employing well-characterized and absolutely calibrated instrumentation, all experimental parameters involved in XRF are known for small relative uncertainties allowing for a completely reference-free quantitation. Apart from traces of rare earth elements, the analytical results of the Chinese ceramic achieved by reference-free XRF are in line with target values given within a proficiency test of the International Atomic Energy Agency (IAEA) involving atomic and nuclear methods.
Application of synchrotron infrared radiation in the study of organic coatings in cross-sections
(2008)
3D Micro X-ray fluorescence analysis was used for the investigation of reverse-glass paintings. The material-specific combination used in reverse-glass paintings leads to damage phenomena reinforced by glass corrosion. To elucidate the mechanism of corrosion processes taking place in the glass object depth profiles of mobile elements are of interest. In order to obtain elemental depth profiles of such kind of fragile objects the method of choice should be non-destructive. Our first results demonstrate the usefulness of the 3D Micro-XRF measurements for this kind of investigations. The assumption that certain binding media may initiate corrosion processes beginning at the interface glass/binding material could be confirmed.
We studied the oxidation and migration processes of inorganic compounds in iron gall inks with a combination of micro X-ray fluorescence analysis (micro-XRF) and micro X-ray absorption near edge structure spectroscopy (micro-XANES). With elemental mapping by micro-XRF, the correlation of the minor elements in the ink to the major element Fe was investigated. Along concentration profiles of Fe, micro-XANES measurements were carried out in order to determine the oxidation state and the local environment. With the help of model inks, we could show that Cu is a further important element in the paper degradation process due to iron gall ink corrosion.