Filtern
Dokumenttyp
- Zeitschriftenartikel (762)
- Vortrag (578)
- Posterpräsentation (360)
- Sonstiges (37)
- Beitrag zu einem Tagungsband (27)
- Forschungsdatensatz (11)
- Buchkapitel (9)
- Dissertation (9)
- Forschungsbericht (3)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (2)
Sprache
- Englisch (1590)
- Deutsch (207)
- Mehrsprachig (6)
Schlagworte
- Fluorescence (184)
- Quantum yield (101)
- Nanoparticle (73)
- Dye (69)
- Lifetime (68)
- Nano (67)
- Sensor (63)
- Immunoassay (62)
- Quality assurance (58)
- NIR (54)
- Photophysics (54)
- ICP-MS (52)
- LIBS (49)
- Lanthanide (48)
- Laser ablation (48)
- Traceability (42)
- Metrology (41)
- Photoluminescence (41)
- Reference material (41)
- Nanomaterial (40)
- Process Analytical Technology (38)
- Particle (36)
- Imaging (35)
- Laser induced plasma (35)
- Nanoparticles (35)
- PFAS (35)
- Prozessanalytik (33)
- Mass spectrometry (32)
- Surface chemistry (32)
- Upconversion (32)
- ELISA (31)
- Plasma modeling (31)
- Quantum dots (31)
- Synthesis (31)
- Soil (30)
- Prozessindustrie (29)
- HR-CS-GFMAS (28)
- Mechanism (28)
- Method (28)
- Upconversion nanoparticle (25)
- Quantum dot (24)
- Electrochemistry (23)
- LA-ICP-MS (23)
- Online NMR Spectroscopy (23)
- Optical spectroscopy (23)
- Uncertainty (23)
- CONSENS (22)
- Microfluidics (22)
- Mycotoxins (22)
- Plasma diagnostics (22)
- Spectroscopy (22)
- Antibody (20)
- Biosensor (20)
- Cancer (20)
- Multiplexing (20)
- SWIR (20)
- Diclofenac (19)
- Luminescence (19)
- Quantification (19)
- Absolute isotope ratio (18)
- Cell (18)
- Mass Spectrometry (18)
- Reference materials (18)
- Automation (17)
- Core-shell particles (17)
- Fluorine (17)
- HR-CS-MAS (17)
- Integrating sphere spectroscopy (17)
- NMR spectroscopy (17)
- Raman spectroscopy (17)
- Amoxicillin (16)
- Bioimaging (16)
- Calibration (16)
- Copper (16)
- Digitalisierung (16)
- Energy transfer (16)
- Process analytical technology (16)
- Antikörper (15)
- Benchtop-NMR (15)
- Certified reference material (15)
- Environment (15)
- Flow cytometry (15)
- Isotope ratio (15)
- Measurement uncertainty (15)
- XRF (15)
- Boden (14)
- Industrie 4.0 (14)
- Interlaboratory comparison (14)
- LC-MS/MS (14)
- Magnetic resonance imaging (14)
- Molecularly imprinted polymers (14)
- Additive manufacturing (13)
- Brightness (13)
- Cement (13)
- Industry 4.0 (13)
- Online NMR spectroscopy (13)
- Optical probe (13)
- Plasma chemistry (13)
- Polymer (13)
- Process Industry (13)
- qNMR (13)
- Amperometry (12)
- Assay (12)
- Biosensoren (12)
- Electron microscopy (12)
- Immunosensor (12)
- Lab-on-a-chip (12)
- MIPs (12)
- Schnelltest (12)
- Size (12)
- Surface coating (12)
- Chemometrics (11)
- Emission spectroscopy (11)
- Isotope analysis (11)
- Isotope dilution (11)
- Magnesium (11)
- Mass-Spectrometry (11)
- Modular Production (11)
- NMR-Spektroskopie (11)
- PLSR (11)
- Transformation products (11)
- Antibodies (10)
- CRM (10)
- Isotope (10)
- Ligand (10)
- Lithium (10)
- Method development (10)
- Nanocrystal (10)
- Online-NMR-Spektroskopie (10)
- Quantitative spectroscopy (10)
- Reaction Monitoring (10)
- Sensors (10)
- Sialic acid (10)
- Single particle (10)
- Temperature (10)
- pH (10)
- Benchtop NMR (9)
- Bioconjugation (9)
- Comparability (9)
- Cr(III) (9)
- GD-OES (9)
- Laser induced plasma deposition (9)
- Machine learning (9)
- Microscopy (9)
- NMR (9)
- PCA (9)
- PH (9)
- Process monitoring (9)
- Raman microspectroscopy (9)
- Reference data (9)
- Silica (9)
- Single cell (9)
- Vor-Ort-Analytik (9)
- Warfarin (9)
- Abwasser (8)
- Affinity chromatography (8)
- Aggregation (8)
- Bead (8)
- Chemometrie (8)
- Coating (8)
- Contrast agent (8)
- Datenanalyse (8)
- Hydrodynamic model (8)
- Isotope dilution mass spectrometry (8)
- Isotopes (8)
- Laser-induced plasma (8)
- Lithium Ion Batteries (8)
- Mechanochemistry (8)
- Microplastics (8)
- Modeling (8)
- Nanosensor (8)
- Oxygen (8)
- Plasma (8)
- Process Control (8)
- RFA (8)
- Roughness (8)
- SI traceability (8)
- Safety (8)
- Screening (8)
- Single cell analysis (8)
- Smartphone (8)
- Software (8)
- Standard (8)
- Standardization (8)
- Sulfur (8)
- Absolute fluorometry (7)
- Antibiotics (7)
- BODIPY (7)
- CCQM (7)
- Carbamazepine (7)
- Certification (7)
- Cr(III) complex (7)
- DNA (7)
- Delta value (7)
- Encoding (7)
- Excitation power density (7)
- Extractable organically bound fluorine (EOF) (7)
- Fluoreszenz (7)
- GC-MS (7)
- Gadolinium (7)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (7)
- Hydrogen (7)
- IR (7)
- Indirect Hard Modeling (7)
- Life sciences (7)
- MOF (7)
- Metabolomics (7)
- Microbeads (7)
- Molecularly Imprinted Polymers (7)
- Optical Spectroscopy (7)
- Peptide (7)
- Peptides (7)
- Polymer particles (7)
- Polymerization (7)
- Rapid test (7)
- SARS-CoV-2 (7)
- Sc-ICP-ToF-MS (7)
- Semiconductor quantum dot (7)
- Sensing (7)
- Single particle spectroscopy (7)
- Smarte Sensoren (7)
- Speciation analysis (7)
- Surface (7)
- Surface analysis (7)
- Transformationsprodukte (7)
- Validation (7)
- Wastewater (7)
- AIS (6)
- Additive Manufacturing (6)
- Barcoding (6)
- Bead-based assay (6)
- Biomarker (6)
- Biosensors (6)
- Cleavable probe (6)
- Crystal (6)
- DNA origami (6)
- Data Analysis (6)
- Digitale Transformation (6)
- Digitization (6)
- Drone (6)
- EMPIR (6)
- Estrogens (6)
- FRET (6)
- Food (6)
- HPLC (6)
- HR-CS-AAS (6)
- HRMS (6)
- Human serum (6)
- ICP-OES (6)
- Indium phosphide (6)
- Indoor air quality (6)
- Isotope reference material (6)
- LFIA (6)
- Lithium-ion batteries (6)
- MC-ICP-MS (6)
- MRI (6)
- Magnetic Beads (6)
- Multivariate data analysis (6)
- NAMUR (6)
- Nanomaterials (6)
- Ochratoxin A (6)
- Optical emission spectroscopy (6)
- Passive Smart Dust (6)
- Peptide library (6)
- Per- and polyfluorinated alkyl substances (PFASs) (6)
- Probe (6)
- Process Monitoring (6)
- Process control (6)
- Process industry (6)
- Protein (6)
- Quantitative NMR Spectroscopy (6)
- Raman (6)
- Ratiometric (6)
- Reproducibility (6)
- Semiconductor (6)
- Sensorik (6)
- Signal amplification (6)
- Stability (6)
- Surface group analysis (6)
- TEM (6)
- Thermography (6)
- Upconversion nanoparticles (6)
- AIE (5)
- Aging (5)
- Analytical Chemistry (5)
- Application (5)
- BPA (5)
- Bisphenol A (5)
- Capillary electrophoresis (5)
- Chemical vapor deposition (5)
- Chlorine (5)
- Complex (5)
- Conventional isotope ratio (5)
- Cyclic voltammetry (5)
- Data processing (5)
- Degradation (5)
- Digitalisation (5)
- EDC (5)
- EMPIR project (5)
- Enhancement (5)
- Equations of state (5)
- Ergot alkaloids (5)
- FTIR (5)
- Fluoride (5)
- Food analysis (5)
- GDMS (5)
- Gas chromatography (5)
- Glyphosate (5)
- Grain size (5)
- Hydration (5)
- Hydrogen reduction (5)
- Hydrolysis (5)
- ISO-Guide 35 (5)
- IgG (5)
- Image processing (5)
- Immunohistochemistry (5)
- Iron oxide (5)
- Isotope amount ratio (5)
- Isotope fractionation (5)
- Isotopic analysis (5)
- Laser metal deposition (5)
- MALDI-TOF-MS (5)
- Magnetic beads (5)
- Magnetpartikel (5)
- MamaLoCA (5)
- Medical diagnostics (5)
- Microbiological influenced corrosion MIC (5)
- Mikroplastik (5)
- Moisture (5)
- Molecular imprinting (5)
- Monoclonal antibody (5)
- Nanopartikel (5)
- Nickel (5)
- Optical quantification (5)
- PEG (5)
- Protein G (5)
- Provenance (5)
- Purity (5)
- Pyrethroids (5)
- Quality Control (5)
- R package (5)
- Rare earth nanoparticles (5)
- Reference product (5)
- Referenzmaterialien (5)
- Ringversuch (5)
- SAFIA (5)
- SAXS (5)
- Signal enhancement (5)
- Single cell-ICP-ToF-MS (5)
- Single molecule (5)
- Spectrometry (5)
- Standards (5)
- Switch (5)
- Test strip (5)
- Transformation product (5)
- Triple isotope fractionation (5)
- Upconverting nanoparticles (5)
- VOC (5)
- Volatile organic compounds (5)
- Wasserstoff (5)
- XPS (5)
- ATCUN (4)
- Additive Fertigung (4)
- Advanced Materials (4)
- Affinity (4)
- Air pollution (4)
- Amino acid analysis (4)
- Analysis (4)
- Analytical chemistry (4)
- Analytical sciences (4)
- Array (4)
- Artificial Neural Networks (4)
- Artificial neural networks (4)
- Automatisierung (4)
- BODIPY dyes (4)
- Bacteria (4)
- Battery (4)
- Biomarkers (4)
- COVID-19 (4)
- Catch and release assay (4)
- Cells (4)
- Cellulose (4)
- Characterization (4)
- Charge transfer (4)
- Chromatography (4)
- Circular economy (4)
- Corrosion (4)
- Cytotoxicity (4)
- Deactivation pathways (4)
- Diatoms (4)
- Dissolution (4)
- EURAMET (4)
- Electrochemical detection (4)
- Elektrochemie (4)
- Emerging pollutants (4)
- Explosives (4)
- Extracellular matrix (4)
- FITC (4)
- Flourescence (4)
- Fluorescence spectroscopy (4)
- Fluorescence standard (4)
- Graphite furnace (4)
- Gypsum (4)
- Hybrid materials (4)
- Hydrogen Storage (4)
- Hyphenated techniques (4)
- ILC (4)
- Image segmentation (4)
- Immunoglobulins (4)
- In situ Raman (4)
- InP (4)
- Indirect hard modeling (4)
- Inflammation (4)
- Interlaboratory Comparison (4)
- Iron oxide nanoparticles (4)
- Isotope delta value (4)
- LC-MS (4)
- Label (4)
- Labeling (4)
- Laser induced breakdown spectroscopy (4)
- Ligands (4)
- Lithium isotope (4)
- MALDI (4)
- Macrophages (4)
- Mass Spectroscopy (4)
- Mass cytometry (4)
- Massenspektrometrie (4)
- Medicine (4)
- MefHySto (4)
- Messunsicherheit (4)
- Microbiologically influenced corrosion (4)
- Microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) (4)
- Mikrofluidik (4)
- Modular production (4)
- Monitoring (4)
- Multi-element analysis (4)
- Mycotoxin (4)
- Mykotoxine (4)
- Nanocrystals (4)
- Nitrogen plasma (4)
- Nitrotyrosine (4)
- Nontarget analysis (4)
- Optical assays (4)
- Optical sensor (4)
- PDT (4)
- Perovskite (4)
- Polymers (4)
- Protein A (4)
- Prozesskontrolle (4)
- Purity assessment (4)
- QI-Digital (4)
- Quality control (4)
- Quenching (4)
- Rapid tests (4)
- Reactive extrusion (4)
- Real-time process monitoring (4)
- Reference Material (4)
- Reliability (4)
- SC-ICP-ToF-MS (4)
- SDS-PAGE (4)
- SEM (4)
- SERS (4)
- SPM (4)
- Schnelltests (4)
- Schwebstoffe (4)
- Sediment (4)
- Sensoren (4)
- Sewage sludge (4)
- Shell (4)
- Silanization (4)
- Silica coating (4)
- Smart Sensors (4)
- Solid-liquid extraction (4)
- Surface group quantification (4)
- Tandem MS (4)
- Test strips (4)
- Teststreifen (4)
- Theory (4)
- Thermal anhydrite (4)
- Titanium dioxide (4)
- Toxicity (4)
- Trichodiene (4)
- Tumor metabolism (4)
- Tyrosine (4)
- Water (4)
- Water Analysis (4)
- Water analysis (4)
- Zinc (4)
- ABID (3)
- Absolute fluorescence quantum yield (3)
- Acoustic levitation (3)
- Active fibers (3)
- Adsorbable organically bound fluorine (AOF) (3)
- Adsorption (3)
- Affinitätschromatographie (3)
- Aggregates (3)
- Aggregation-induced emission (3)
- Air quality (3)
- Allergy (3)
- Analytical Sciences (3)
- Archaea (3)
- Arzneimittel (3)
- Atomic absorption spectrometry (3)
- BFR (3)
- Batteries (3)
- Benchtop NMR spectroscopy (3)
- Biochip (3)
- Biofouling (3)
- Biosensing (3)
- Biotechnology (3)
- Bisphenols (3)
- Boron (3)
- Borosilicate glass (3)
- Brain (3)
- Böden (3)
- CHO functions (3)
- Calibration-free LIBS (3)
- Calibration-free analysis (3)
- Carbamazepin (3)
- Carbon steel corrosion (3)
- Cathodoluminescence (3)
- Cell studies (3)
- Chemiluminescence (3)
- Click chemistry (3)
- Combinatorial peptide library (3)
- Combustion Ion Chromatography (3)
- Combustion ion chromatography (CIC) (3)
- Concrete (3)
- Conductometry (3)
- Copolymer (3)
- Core-Shell Particles (3)
- Core−shell particles (3)
- Cyber-Physical Systems (3)
- DPSS laser (3)
- Data (3)
- Datenkonzepte (3)
- Delta scale (3)
- Delta values (3)
- Density measurements (3)
- Diagnostics (3)
- Diatomic molecule (3)
- Digital Transformatioin (3)
- Digital transformation (3)
- E. coli (3)
- ESI-MS (3)
- Effect based Method (3)
- Electron number density (3)
- Elektrochemisch (3)
- Embedded sensor (3)
- Emission line profiles (3)
- Emission reference materials (3)
- Environmental analysis (3)
- Equation of state (3)
- Explosives detection (3)
- Extracellular vesicles (EV) (3)
- FPLC (3)
- Fatty acid metabolism (3)
- Fertilizer (3)
- Flow Chemistry (3)
- Fluorescence Spectroscopy (3)
- Fluorescence decay kinetics (3)
- Fluorescence lifetime (3)
- Fluorescence microscopy (3)
- Fluorescent sensor (3)
- Food safety (3)
- Fungi (3)
- Gadofosveset (3)
- Gas analysis (3)
- Gassensorik (3)
- General Medicine (3)
- Glue (3)
- Glutaraldehyde (3)
- Gold nanocluster (3)
- Gold nanoparticles (3)
- Green chemistry (3)
- H2Safety@BAM (3)
- Herceptin (3)
- High-fired gypsum mortar (3)
- High-fired medieval gypsum mortars (3)
- High-resolution mass spectrometry (3)
- Hybridoma (3)
- Hydrolytic resistance (3)
- ICP-ToF-MS (3)
- Immunocapture (3)
- Immunoprecipitation (3)
- In vivo imaging (3)
- Ir DNA staining approach (3)
- Iron (3)
- Iron disorders (3)
- Isolithocholsäure (3)
- Isotope ratios (3)
- Isotopenanalyse (3)
- LC-HRMS (3)
- Lab-on-chip (3)
- Large-scale processing (3)
- Laser (3)
- Laser Ablation (3)
- Laser induced dielectric breakdown (3)
- Laser-induced breakdown spectroscopy (3)
- Lateral Flow Assay (3)
- Lateral flow assay (3)
- Leaching (3)
- Lignin (3)
- Limit of detection (3)
- Linearity (3)
- Lipidomic profile (3)
- MALDI-TOF MS (3)
- MIP (3)
- MOFs (3)
- MS based method (3)
- Materials emissions test (3)
- Mercury (3)
- Metabolic stress (3)
- Metabolites (3)
- Metalloprotein (3)
- Metalloproteins (3)
- Method comparison (3)
- Metrology in chemistry (3)
- Microfluidic (3)
- Mineralwolle (3)
- Miniaturization (3)
- Modelling (3)
- Molar mass (3)
- Molecular imaging (3)
- Monoclonal Antibodies (3)
- Multicollector-ICP-MS (3)
- Multimodal (3)
- Multimodal reporters (3)
- Multiplex (3)
- Mycotoxin Biomarker (3)
- NAMUR Open Architecture (3)
- NMR Spectroscopy (3)
- Nano particle (3)
- Nanomaterialien (3)
- Nitration (3)
- Normung (3)
- Nuclear Magnetic Resonance Spectroscopy (3)
- Nährstoffe (3)
- OBOC library (3)
- Oil (3)
- Online (3)
- Optical assay (3)
- Oriented immobilization (3)
- Oxygen sensor (3)
- Particle Synthesis (3)
- Particle size (3)
- Particles (3)
- Partikel (3)
- Peptide mass fingerprinting (3)
- Per- and Polyfluoroalkyl substances (PFAS) (3)
- Performance validation (3)
- Pesticide (3)
- Phosphates (3)
- Photodegradation (3)
- Plasma enhanced chemical vapor deposition (3)
- Plasma physics (3)
- Plasmonic enhancement (3)
- Polarity (3)
- Pollution (3)
- Polyglycerol (3)
- Principal component analysis (PCA) (3)
- Production (3)
- Protein hydrolysis (3)
- Protein quantification (3)
- Purification (3)
- Quantitative NMR (3)
- RBD (3)
- Ratiometric sensors (3)
- Referenzmaterial (3)
- Reliable measurements (3)
- Reporter (3)
- Rhodamine (3)
- Ring resonator (3)
- Risk assessment (3)
- SPE (3)
- SPE HR-CS GF MAS (3)
- Safe-by-Design (3)
- Sapphire (3)
- Seawater (3)
- Self-assembly (3)
- Semiconductor nanocrystal (3)
- Sensitization (3)
- Sequencing (3)
- Serum (3)
- Silane (3)
- Silicon (3)
- Smart Dust (3)
- Solid state emission (3)
- Spatial heterodyne spectroscopy (3)
- Spatial information (3)
- Statistics (3)
- Steel (3)
- Supercapacitor (3)
- Surface functionalization (3)
- TNT (3)
- TP (3)
- Temperatures (3)
- Thermal equilibrium (3)
- Thermographie (3)
- Tissue (3)
- Trace analysis (3)
- Ultrafine particles (3)
- Umweltanalytik (3)
- Umweltsimulation (3)
- Upconversion nanocrystal (3)
- Validierung (3)
- Viscosity (3)
- WFD (3)
- WWTP (3)
- Wasser (3)
- Wastewater-based epidemiology (3)
- Yb(III) complex (3)
- ZRM (3)
- fluorescence (3)
- pH probe (3)
- pH sensing (3)
- 150th anniversary (2)
- 3D-printing (2)
- AAA (2)
- AAAA (2)
- AAS (2)
- ABC (2)
- AF4 (2)
- AIS QD (2)
- ALCOREF (2)
- Absolute fluorescence (2)
- Absolute measurement (2)
- Absorption (2)
- Accurate mass (2)
- Adulteration (2)
- Advanced materials (2)
- Advanced nanomaterials (2)
- Affinity Chromatography (2)
- Affinity extraction (2)
- Aggregation induced emission (2)
- Air traffic (2)
- Albumin (2)
- Aluminum oxide (2)
- Ambient mass spectrometry (2)
- Amorphous carbon (2)
- Amorphous phases (2)
- Amorphous silica particles (2)
- Amplification (2)
- Analytical methods (2)
- Anhydrite (2)
- Aniline (2)
- Anion recognition (2)
- Antagonists (2)
- Anti-Counterfeiting (2)
- Antibiotika (2)
- Antibody coating (2)
- Antibody identification (2)
- Antibody quantification (2)
- Aromatic amino acid analysis (2)
- Artificial weathering (2)
- Atherosclerosis (2)
- Atomic weight (2)
- Automated image analysis (2)
- Automatisation (2)
- Aza-BODIPY (2)
- BAM (2)
- BODIPY dye (2)
- BSA (2)
- Bead-based assays (2)
- Bead-based-assay (2)
- Benchtop NMR Spectroscopy (2)
- Benz[a]anthracene (BaA) (2)
- Benzo[a]pyrene (BaP) (2)
- Betriebspunktoptimierung (2)
- Binary mixtures CO2 + O2 (2)
- Bioanalysis (2)
- Biochemistry (2)
- Biocides (2)
- Biodiesel fuel (2)
- Biofilm (2)
- Biofuels (2)
- Biology (2)
- Biophotonics (2)
- Bioseparation (2)
- Biotransformation (2)
- Bivalves (2)
- Boltzmann plot (2)
- BonaRes (2)
- Breath (2)
- Breath alcohol analyser (2)
- Bundesanstalt für Materialforschung und -prüfung (2)
- Bundesoberbehörden (2)
- CE/MC-ICP-MS (2)
- CFD computational fluid dynamic (2)
- CIC (2)
- Cadmium (2)
- Caffeine (2)
- Calcium (2)
- Calcium monofluoride (2)
- Calibration free LIBS (2)
- Cancer cells (2)
- Canine olfactometry (2)
- Carbon dot (2)
- Carrier (2)
- Cell proliferation (2)
- Certified Reference Material (2)
- Certified reference materials (2)
- Cetirizine (2)
- Chemical Analysis (2)
- Chemical evolution (2)
- Chemical reactors (2)
- Chip (2)
- Chirality (2)
- Cleaning (2)
- Cleavable probes (2)
- Cleavable reporter (2)
- Climate change (2)
- Clones (2)
- Cluster (2)
- Cocaine (2)
- Cocoa (2)
- Collaborative trial (2)
- Collection (2)
- Colorimetric Sensor (2)
- Colorimetric sensor particles (2)
- Combinatorial chemistry (2)
- Compact NMR Spectroscopy (2)
- Comparison (2)
- Compound annotation (2)
- Confetti (2)
- Conjugate (2)
- Convolutional neural networks (2)
- Core-shell nanoparticles (2)
- Core–shell particles (2)
- Corona (2)
- Coronavirus (2)
- Corophium volutator (2)
- Corundum (2)
- Crosslinker (2)
- Cuprorivaite (2)
- Cyanide in soil (2)
- Cyanine (2)
- Cylic Voltammetry (2)
- DCF (2)
- DEHT (2)
- DFA (2)
- DFT (2)
- DINCH (2)
- DNA Origami (2)
- DNA radiation damage (2)
- Database (2)
- Datenauswertung (2)
- Datenvorbehandlung (2)
- Decay kinetics (2)
- Delivery system (2)
- Density data (2)
- Depth-profiling (2)
- Derivatization (2)
- Diagenesis (2)
- Diagnosis (2)
- Digestion (2)
- Digital Transformation (2)
- Digital Twin (2)
- Digitaler Zwilling (2)
- Dimerization (2)
- Dip-stick assay (2)
- Direct Energy Deposition (2)
- Dissociative electron attachment (2)
- Distributed Networks (2)
- Dityrosine (2)
- Documentation (2)
- Doping (2)
- Downstream processing (2)
- Drogen (2)
- Drug delivery (2)
- Durchflusszytometrie (2)
- Dyes (2)
- Dynamische Lichtstreuung (2)
- EC/LC/MS (2)
- EDX (2)
- EDXRF (2)
- EMPIR 18HLT01 MetVesII (2)
- EOF (2)
- Editorial (2)
- Egyptian blue (2)
- Electrochemical (2)
- Electrochemical oxidation (2)
- Electrochemical sensor (2)
- Electrospray ionization (2)
- Embedded system (2)
- Emission testing (2)
- Endocrine disruptor (2)
- Endokrine Disruptoren (2)
- Engineered Nanomaterials (2)
- Enhancement strategy (2)
- Environmental Chemistry (2)
- Environmental pollutants (2)
- Environmental simulation (2)
- Environmental speciation (2)
- Er(III) (2)
- Ergot (2)
- Escherichia coli (2)
- Ethanol in water (2)
- Ethinylestradiol (2)
- Excitation (2)
- Exciton diffusion (2)
- Exocytosis (2)
- Explosive (2)
- Extrahierbar organisch gebundenes Fluor (EOF) (2)
- FCM (2)
- FIB (2)
- FPIA (2)
- FTIR spectra (2)
- Ferumoxytol (2)
- Festphasenextraktion (2)
- Fingerprint (2)
- Finow Canal (2)
- Flow Cell (2)
- Flow cytometry (FCM) (2)
- Fluor (2)
- Fluorescein (2)
- Fluorescence sensing (2)
- Fluorescent Probes (2)
- Fluorescent dye (2)
- Fluorescent particles (2)
- Fluorination (2)
- Fluorometric sensing (2)
- Fluxomics (2)
- Folding chirality (2)
- Forsterite (2)
- Functional group (2)
- Funtional Groups (2)
- Fusarium (2)
- Fusion protein (2)
- GC-FID (2)
- GERG-2008 equation of state (2)
- Gallium doping (2)
- Gas chromatography (GC) (2)
- Gas sensing (2)
- Gasanalytik (2)
- Gaschromatography-Mass Spectrometry (2)
- Gasoline (2)
- General Earth and Planetary Sciences (2)
- Geological material (2)
- Gesteuerte Freisetzung (2)
- Gips (2)
- Glass (2)
- Glow Discharge Mass Spectrometry (2)
- Gold (2)
- Graphene (2)
- Graphite (2)
- Gravimetric preparation (2)
- Green Deal (2)
- Grundwasser (2)
- Guanidinium Receptors (2)
- Gypsum dehydration (2)
- HPLC-MS (2)
- HPLC-MS/MS (2)
- HTS (2)
- Halogene (2)
- Halogens (2)
- Hapten Immunoassay (2)
- Health, Toxicology and Mutagenesis (2)
- Heart failure (2)
- Herkunftsbestimmung (2)
- High-resolution MS (2)
- History of the research work of Norbert Jakubowski (2)
- Hochauflösende Massenspektrometrie (2)
- Hot steam (2)
- Human papillomavirus (2)
- Hydrazinolysis (2)
- Hydrogenation (2)
- Hydrolysis products (2)
- ICP-TOF-MS (2)
- IDMS (2)
- ISO 17025 (2)
- ISO Guide 35 (2)
- Identity (2)
- Image analysis (2)
- Immobilisierung (2)
- Immobilization (2)
- Immuno-assay (2)
- Immunoaffinity extraction (2)
- Immunoassays (2)
- In situ (2)
- Indicator (2)
- Indikatorfreisetzung (2)
- Indirect Hard Modelling (2)
- Indoor air (2)
- Inductively Coupled Plasma Mass Spectrometry (2)
- Infrastruktur (2)
- Inline (2)
- Instrument calibration (2)
- Instrument performance validation (2)
- Interferences (2)
- Ion mobility spectrometry (2)
- Ionic liquid (2)
- Ionophore Antibiotika (2)
- Isotope Dilution (2)
- Isotope delta (2)
- Isotope dilution (ID) (2)
- Isotope reference materials (2)
- Isotopic fractionation (2)
- Isotopic shift (2)
- Jahrestag (2)
- Key comparison (2)
- Koffein (2)
- LA-ICP-MS with cellular resolution (2)
- LC-ELISA (2)
- LIF (2)
- LMD (2)
- Lab of the Future (2)
- Lab-on-a-Chip (2)
- Laboratory 4.0 (2)
- Lanthanides (2)
- Large-scale production (2)
- Laser-Induced Background Spectroscopy (2)
- Laser-Pulver-Auftragschweißen (2)
- Laser-induced XUV spectroscopy (2)
- Laser-spark (2)
- Lateral Flow Assays (2)
- Lateral flow test (2)
- Legacy pollution (2)
- Life science (2)
- Ligand design (2)
- Linker (2)
- Lipidomics (2)
- Liquid chromatography (2)
- Liquid chromatography (LC) (2)
- Lithium batteries (2)
- Llifetime (2)
- Low energy electrons (2)
- Low-cost (2)
- Low-energy electrons (2)
- Low-field NMR Spectroscopy (2)
- Low-field NMR spectroscopy (2)
- Luminol (2)
- Lung cancer (2)
- M+O-Sensoren (2)
- MDG (2)
- MIC (2)
- MICAP-MS (2)
- ML (2)
- MOSES (2)
- MST (2)
- MYCN (2)
- Magic-sized cluster (2)
- Magnesium isotope ratios (2)
- Magnetic nanocatalyst (2)
- Mass spectrometry (MS) (2)
- Material sciences (2)
- Mesoporous materials (2)
- Metal cluster (2)
- Metal toxicity (2)
- Metal uptake (2)
- Metal-organic frameworks (2)
- Metals (2)
- Metal−organic frameworks (2)
- Metformin (2)
- Method validation (2)
- Methylmercury (2)
- Metrologie (2)
- Microarray (2)
- Microbe interactions (2)
- Microdroplet generator (2)
- Microfluidic mixing (2)
- Microparticle (2)
- Microparticles (2)
- Mie resonances (2)
- Mineral identification (2)
- Mineral paragenesis (2)
- Mobile phase (2)
- Modeling chemical reactions (2)
- Modulare Produktion (2)
- Molecular absorption spectrometry (2)
- Molybdenum boride (2)
- Mono-hydride (2)
- Monoclonal antibodies (2)
- Monolith (2)
- Monolithic column (2)
- Monomer (2)
- Multicellular spheroid (2)
- Multivariat (2)
- Multivariate Data Analysis (2)
- Multivariate Datenanalyse (2)
- Muscheln (2)
- NIR Spektroskopie (2)
- NIR-II (2)
- NMR Validation (2)
- NOA (2)
- Nahinfrarotspektroskopie (2)
- Nano- and microsensors (2)
- Nanocarrier (2)
- Nanocomposite (2)
- Nanoparticle characterization (2)
- Nanoparticle formation (2)
- Nanosafety (2)
- Nanotechnologie (2)
- Nanotoxicity (2)
- Natural gas mixtures (2)
- Near Infrared Spectroscopy (2)
- Nerve agents (2)
- Network (2)
- Neural networks (2)
- Nitrogen (2)
- Nitrogen oxides (2)
- Non-classical crystallization theory (2)
- Non-metal analysis (2)
- Non-metals (2)
- Nährelemente (2)
- Oberflächengewässer (2)
- Oberflächenwasser (2)
- Open Science (2)
- Optical detection (2)
- Optical sensors (2)
- Optischer Spektroskopie (2)
- Organic contaminants (2)
- Origami (2)
- Ozone (2)
- PANIC (2)
- PBFSM (2)
- Partial Least Squares Regression (2)
- Particle characterisation (2)
- Particle surface analysis (2)
- Particle synthesis (2)
- Passivation (2)
- Peptide Library (2)
- Peptide analysis (2)
- Peptide pools (2)
- Permeation barriers (2)
- Permethrin (2)
- Peroxidase (2)
- Pflanzenvirus (2)
- Pharmaceuticals (2)
- Phenylalanine (2)
- Phosphor (2)
- Phosphorylated peptides (2)
- Photocatalysis (2)
- Photocatalytic activity (2)
- Photochemistry (2)
- Photoluminescence quantum yield (2)
- Photonic crystal (2)
- Photonic sensors (2)
- Photooxidation (2)
- Phthalate (2)
- Plants (2)
- Plasma enhanced chemical deposition (2)
- Plasma processes (2)
- Plasma tomography (2)
- Plastic (2)
- Pollutant (2)
- Pollutants (2)
- Polycyclic aromatic hydrocarbon (PAH) (2)
- Polyethylene glycole (2)
- Polyethylene grades (2)
- Polypropylen (2)
- Polypropylene (2)
- Polystyrol (2)
- Porphyrin (2)
- Power density (2)
- Power density dependence (2)
- Probenvorbereitung (2)
- Prostate cancer (2)
- Protein analysis (2)
- Protein nitration (2)
- Proteins (2)
- Proximity-enhanced reaction (2)
- Pyrolysis (2)
- QNMR (2)
- Quality Assurance (2)
- Quality Infrastructure (2)
- Quantitative Analysis (2)
- Quantitative NMR spectroscopy (2)
- Quantitative protein analysis (2)
- Quantum Yield (2)
- Quantum yields (2)
- RP-HPLC (2)
- Raid test (2)
- Raman-Spektroskopie (2)
- Ramanmikrospektroskopie (2)
- Recombinant protein expression (2)
- Recycling (2)
- Reductive amination (2)
- Referenzmaterial-Herstellung (2)
- Regeneration (2)
- Remote Detection (2)
- Renal disease (2)
- Reproducibility crisis (2)
- Retrospective analysis (2)
- Round robin test (2)
- Röntgenfluoreszenz (2)
- SBA-15 (2)
- SC-ICP-MS (2)
- SHS (2)
- SI (2)
- SI-traceability (2)
- SPR (2)
- SUMO (2)
- Scanning electron microscopy (2)
- Scattering (2)
- Schadstoffaustrag (2)
- Schadstoffe (2)
- Semiconductor nanocrystals (2)
- Sensor molecules (2)
- Sensorpartikel (2)
- Sequence coverage (2)
- Shadowgraphy (2)
- Shape (2)
- Silanes (2)
- Silica and Polystyrene Particles (2)
- Silica and polystyrene nanoparticles (2)
- Silicon halides (2)
- Silicon nanoparticles (2)
- Silicon photonics (2)
- Silver nanoparticles (2)
- Simulation (2)
- Single Cell (2)
- Single cell ICP-MS (2)
- Single particle ICP-MS (2)
- Single-sinker densimeter (2)
- Singlet oxygen (2)
- Smart sensors (2)
- Smarte Aktoren (2)
- Smarte Feldgeräte (2)
- Smarter Sensor (2)
- Solid phase extraction (SPE) (2)
- Solid state (2)
- Solid state NMR (2)
- Spatial heterodyne spectrometer (2)
- Special issue (2)
- Specialty Chemicals (2)
- Speciation Analysis (2)
- Spectral Modeling (2)
- Spectrocube (2)
- Speed of sound (2)
- Spike-Protein (2)
- Sr isotopes (2)
- Sugars (2)
- Sum Parameter (2)
- Sum parameter (2)
- Surface Group Analysis (2)
- Surface groups (2)
- Surface water (2)
- Synthetic peptides (2)
- Sythesis (2)
- TCE (2)
- TFA (2)
- TTBP-TAZ (2)
- Tag (2)
- Temperature Control (2)
- Ternary quantum dots (2)
- Test strip analysis (2)
- Tetramethylammonium hydroxide (2)
- Thermal desorption (2)
- Thermodynamic (2)
- Thermografie (2)
- Thin film (2)
- Titration (2)
- Total cyanide (2)
- Toxic industrial chemicals (2)
- Toxicity testing (2)
- Toxikologie (2)
- Toys (2)
- Trace Analysis (2)
- Trace elements (2)
- Transferrin (2)
- Transition metals (2)
- Transmission electron microscopy (2)
- Trastuzumab (2)
- Triplet-triplet annihilation (2)
- Truffle (2)
- Trypsin (2)
- Tumor (2)
- Twin-screw extrusion (TSE) (2)
- Ultraschall (2)
- Umweltschadstoffe (2)
- Umweltverhalten (2)
- Underwater LIBS (2)
- UpConversion (2)
- Upconversion luminescence (2)
- Uptake studies (2)
- Vacuum-UV (2)
- Virial coefficients (2)
- Virus (2)
- Volumetric data (2)
- Water quality (2)
- Water synthesis (2)
- Wear (2)
- Weichmacher (2)
- Whole water samples (2)
- Wireless mobile sensor device (2)
- XRD (2)
- ZIF (2)
- ZIF-8 (2)
- Zeolitic imidazolate framework (2)
- Zerstörungsfreie Prüfung (2)
- ZnSe (2)
- depth-profiling (2)
- fluorine (2)
- pH sensor (2)
- spectroscopy (2)
- (Organisch gebundenes) Fluor-Summenparameter (1)
- 1-indanol (1)
- 150th anniversary of BAM (1)
- 18HLT01 MetVes II (1)
- 18HTL10 (1)
- 2,4-D (1)
- 2,5-dihydroxyacetophenone (1)
- 2-propanol oxidation (1)
- 280 nm (1)
- 2D chromatography (1)
- 2D materials (1)
- 3D image analysis (1)
- 3D printing (1)
- 3D ultrastructural analysis (1)
- 3D-Mikrofluidik (1)
- 4,4′-dimercaptoazobenzene (1)
- 5-Bromouracil (1)
- 5-bromouracil (1)
- 6xHis (1)
- 8-bromoadenine (1)
- A4F (1)
- ACE2 (1)
- ACE2-Rezeptor (1)
- ADAMTS4 (1)
- ADC (1)
- AFB1 (1)
- AFM (1)
- ANAKON (1)
- AOF (1)
- ASAXS (1)
- Aaerosol particles (1)
- Aautomatisation (1)
- Ab initio calculation (1)
- Abbau (1)
- Abfall (1)
- Abiogenesis (1)
- Abklingzeit (1)
- Absolute (1)
- Absolute adsorption (1)
- Absolute quantum yield (1)
- Absorption spectrometry (1)
- Accreditation (1)
- Acid (1)
- Acidic cleavage (1)
- Acoustic (1)
- Acoustic Emission (1)
- Acoustic resonance (1)
- Acoustic resonator (1)
- Acoustic virial coefficients (1)
- Acoustical Levitation (1)
- Acrylamide (1)
- Acute myocardial infarction (1)
- Adhesion (1)
- Adhesives (1)
- Adsorbed microgel particles (1)
- Adsorber (1)
- Advanced material (1)
- Aerosol particles (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity column (1)
- Affinity enrichment (1)
- Affinity immobilization (1)
- Affinity support (1)
- Affinitätsextraktion (1)
- Affinitätskonstante (1)
- Affinty (1)
- Aflatoxins (1)
- Ag2S (1)
- AgInS (1)
- AgInS2 (1)
- Agarose (1)
- Aging Mechanisms (1)
- Aging mechanisms (1)
- Agricultural economy (1)
- Agriculture (1)
- Air filter samples (1)
- Air particulate matter (1)
- Air sampling (1)
- Airborne (1)
- Airborne particles (1)
- Airborne particulate pollutants (1)
- Airport (1)
- Aktorik (1)
- Al2O3 (1)
- AlCl (1)
- Alanine scan (1)
- Alcohol electrooxidation (1)
- Algae (1)
- Algen (1)
- Algorithms (1)
- Alkali ions (1)
- Alkali zinc borate glasses (1)
- Alkylierung (1)
- Altenuene (1)
- Alteration (1)
- Alternaria (1)
- Alternaria mycotoxins (1)
- Aluminium (1)
- Aluminium oxide (1)
- Aluminiumoxid (1)
- Aluminum (1)
- Alzheimer disease (1)
- Alzheimer’s disease (1)
- Ambient Desorption/Ionization (1)
- Ambient Ionization (1)
- Ambient desorption/ionization (1)
- Ambient ionization (1)
- Ambient pressure laser ionization (1)
- Ameisensäure (1)
- Amino acids (1)
- Ammonia (1)
- Ammoniak (1)
- Ammunition (1)
- Amorpher Kohlenstoff (1)
- Amorphous Zinc phosphate (1)
- Amperometrie (1)
- Amyloid-beta (1)
- Analyseverfahren (1)
- Analytical science (1)
- Analytical services (1)
- Analytical standards (1)
- Analytics (1)
- Analytik (1)
- Anemia (1)
- Aneurism (1)
- Aneurysm (1)
- Angiography (1)
- Angiotensin II (1)
- Anhydrit (1)
- Anilinopyridine (1)
- Animal slurry (1)
- Anion receptors (1)
- Anions (1)
- Anode (1)
- Anthracene (1)
- Anthropocene (1)
- Anthropogene Marker (1)
- Anthropogenic markers (1)
- Anti-cancer (1)
- Antibody Purification (1)
- Antibody Quantification (1)
- Antibody conjuagtes (1)
- Antibody conjugates (1)
- Antibody drug conjugate (1)
- Antibody library (1)
- Antibody light chain (1)
- Antibody production for hydrophobic molecules (1)
- Antibody purification (1)
- Antibody screening (1)
- Antibody subclass (1)
- Antibody-gated indicator delivery (1)
- Antibody-gated indicator delivery systems (1)
- Antibody-gated materials (1)
- Antiepileptika (1)
- Antiepileptikum (1)
- Antifouling biocides (1)
- Antifouling surface (1)
- Antifouling-Biozide (1)
- Antigen testing (1)
- Antigens (1)
- Antihistaminika (1)
- Antikensammlung Berlin (1)
- Antikörperkonjugate (1)
- Antikörpermarkierung (1)
- Antimicrobial resistance (1)
- Aorta (1)
- App (1)
- Applied optical spectroscopy (1)
- Aptamere (1)
- Apyrase (1)
- Aqueous quantum dot (1)
- Aqueous synthesis (1)
- Arabidopsis (1)
- Archaeometry (1)
- Archean ocean (1)
- Argon (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Aromatic hydrocarbons (1)
- Aromatische Aminosäureanalytik (1)
- Arsenite (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Ash content (1)
- Aspergillus (1)
- Assessment (1)
- Atherosclerotic plaques (1)
- Atmospheric Pressure Chemical Ionization (1)
- Atmospheric aerosol (1)
- Atomabsorptionsspektrometrie (1)
- Atomic (1)
- Atomic Absorption (1)
- Atomic Absorption Spectrometry (1)
- Atomic Force Microscopy (1)
- Atomic absorption spectroscopy (1)
- Atomic and molecular physics, and optics (1)
- Atomic force microscopy (1)
- Atomic spectrometry (1)
- Atomic spectroscopy (1)
- Atomic weights (1)
- Au nanodisks (1)
- Au nanoparticles (1)
- Augenbohne (1)
- Autoantibodies (1)
- Autoantikörper (1)
- Automated Image Analysis (1)
- Automated Purification (1)
- Automated assay (1)
- Automated single cell-ICP-ToF-MS (1)
- Automated synthesis (1)
- Automated system (1)
- Automotive gases (1)
- Autonomous chemistry (1)
- Autophagy (1)
- Aviation (1)
- Avogadro constant (1)
- Azithromycin (1)
- BAM Data Store (1)
- BBodSChV (1)
- BCA (1)
- BCA test (1)
- BERM (1)
- BF3 (1)
- BODIPY Dyes (1)
- BODIPY probe (1)
- BODIPYs (1)
- BPA removal (1)
- BTEX (1)
- BaF (1)
- Bacgteria (1)
- Back-side integration (1)
- Background values (1)
- Bacterial lipopolysaccharides (1)
- Bacterial lysates (1)
- Bakterien (1)
- Ball milling (1)
- Basic Statistics (1)
- Basic solvent (1)
- Bassanite (1)
- Batch analysis (1)
- Battery aging (1)
- Baustoffe (1)
- Bauxite residue (1)
- Bead injection spectroscopy (1)
- Bead injections (1)
- Benchmarking study (1)
- Benchtop (1)
- Benzene-1,3,5-tricarboxylic acid (1)
- Benzin (1)
- Benzothiadiazole (1)
- Benzoxadiazole dyes (1)
- Beschichtung (1)
- Bet v 1 (1)
- Betula pendula (1)
- Bewitterung (1)
- Big Data (1)
- Big science (1)
- Binary gas mixture (1)
- Binder (1)
- Binding molecule (1)
- Bio engineering (1)
- Bio-apatite (1)
- Bio-gated hybrid materials (1)
- BioProScale (1)
- Bioapatite (1)
- Biobased polymers (1)
- Biochemische Parameter (1)
- Biochemische Sensoren (1)
- Biocomposite (1)
- Bioconjugate (1)
- Bioconjugates (1)
- Biodiesel (1)
- Biogenic carbonates (1)
- Bioinformatics (1)
- Biokonjugation (1)
- Biological boron recycling (1)
- Biomimicry (1)
- Biopolymers Probes (1)
- Bioprocess (1)
- Biosilicification (1)
- Biosynthesis (1)
- Biota (1)
- Biotests (1)
- Birch pollen allergen (1)
- Bismuth (1)
- Bisphenol-A (1)
- Blank characterization (1)
- Block copolymer (1)
- Blood (1)
- Blood-brain barrier (1)
- Bodenanalytik (1)
- Bombs (1)
- Borate glasses (1)
- Border surveillance (1)
- BornAgain simulation (1)
- Boron Neutron Capture Therapy (BNCT) (1)
- Boron compound (1)
- Boron halides (1)
- Boron isotope (1)
- Boron isotope fractionation (1)
- Boron isotopic composition (1)
- Boron monohydride (1)
- Boronic acid (1)
- Borosilicate Glass (1)
- Borosilicatglas (1)
- Borosilikatglas (1)
- Bovine serum albumin (1)
- Bovine serum albumin (BSA) (1)
- Bradford (1)
- Bradford-Assay (1)
- Brassica napus (1)
- Breath alcohol control (1)
- Brominated flame retardants (1)
- Brownsche Molekularbewegung (1)
- Brunauer-Emmett-Teller (1)
- Building material (1)
- Bunsen-Kirchhoff-Preis (1)
- C-C coupling (1)
- C-dot (1)
- C3A (1)
- CCMV (1)
- CCQM key comparison (1)
- CCQM-K (1)
- CE (1)
- CE-ICP-MS (1)
- CEA (1)
- CEC-L-103 (1)
- CF LIBS algorithms (1)
- CF-LIBS (1)
- CID (1)
- CMC (1)
- CMOS (1)
- CMOS camera (1)
- CO2 + n-alkanes (1)
- COSMO (1)
- CRP (1)
- CUINS2 nanocrystals (1)
- CVD-Graphene (1)
- CaCl emission bands (1)
- CaF (1)
- Caenorhabditis elegans (1)
- Calcification (1)
- Calcite (1)
- Calcium carbonate (1)
- Calcium carbonates (1)
- Calibrated fluorescence measurements (1)
- Calibration beads (1)
- Calibration laboratory (1)
- Calibration slide (1)
- Calibration standards (1)
- Caloric properties (1)
- Calorimetry (1)
- Cancer awareness measure (1)
- Cancer risk (1)
- Cancer therapy (1)
- Cannibal Drug (1)
- Capacitively coupled discharge (1)
- Capecitabine (1)
- Capillary electrophoresis-mass spectrometry (1)
- Carbodiimide crosslinking (1)
- Carbon (1)
- Carbon Nanodots (1)
- Carbon cycle (1)
- Carbon dioxide (1)
- Carbon nano-onion (1)
- Carbon nanodots (1)
- Carboxyl group (1)
- Cardiac troponin (1)
- CardioMet (1)
- Cardiolipins (1)
- Cardiovascular (1)
- Cardiovascular diseases (1)
- Carrier protein (1)
- Carrier-Material (1)
- Carriers (1)
- Catalogue of services (1)
- Catalysis (1)
- Cathode (1)
- Cconventional method (1)
- CdS shell (1)
- CdSe (1)
- CdSe/ZnS quantum Dots (1)
- CeO2 (1)
- CellenONE (1)
- Cellular substructure (1)
- Cellular trafficking (1)
- Cellular uptake (1)
- Cement Hydration (1)
- Cement clinker remnants (1)
- Cement hydration (1)
- Cement pastes (1)
- Cement-based materials (1)
- Central Taurus (1)
- Ceramic (1)
- Cerium oxide (1)
- Ceruloplasmin (1)
- Cetirizin (1)
- Chamber test (1)
- Chamber-test (1)
- Charge Transfer (1)
- Charged dyes (1)
- Cheese (1)
- Chelate (1)
- Chemical Process Control (1)
- Chemical Production (1)
- Chemical Safety (1)
- Chemical and material safety (1)
- Chemical characterization (1)
- Chemical composition (1)
- Chemical coverage (1)
- Chemical derivatization (1)
- Chemical protein modification (1)
- Chemical warfare agents (1)
- Chemical-hydrodynamic modeling (1)
- Chemische Prozesskontrolle (1)
- Chemodosimeter (1)
- Chemometric (1)
- Chemometrik (1)
- Chemometry (1)
- Chemosensor (1)
- Chenopodium album (1)
- Chicken antibodies (1)
- Chip-Screening (1)
- Chlor (1)
- Chlorides (1)
- Chlorine determination (1)
- Chloroanilines (1)
- Chlorofluorosilanes (1)
- Chlorogenic acid (1)
- Chromium (III) complexes (1)
- Chronic kidney disease (1)
- Chronoamperometry (1)
- Ciaaw.org (1)
- Circular Economy (1)
- Cispaltin (1)
- Citation (1)
- Citizen Science (1)
- Citrullinated (1)
- Clarithromycin (1)
- Classical primary measurement method (CPM) (1)
- Classification (1)
- Clean energy technology (1)
- Cleavable linker (1)
- Cleavage (1)
- Climate (1)
- Climate Changes (1)
- Clinical Biochemistry (1)
- Clinical samples (1)
- Cmos (1)
- Cobaloxime complex (1)
- Cocaine detection (1)
- Cocrystals (1)
- Coffein (1)
- Collagen (1)
- Collision induced dissociation (CID) (1)
- Collision-induced dissociation (1)
- Colloidal semiconductor nanocrystals (1)
- Color (1)
- Color tuning (1)
- Colorchanging Particles (1)
- Colorimetric Test (1)
- Coltan (1)
- Column holder (1)
- Combinatorial library (1)
- Combinatorial polymer libraries (1)
- Combinatorial screening (1)
- Combustion (1)
- Commercial metal-organic frameworks (1)
- Commercialization (1)
- Compact NMR (1)
- Compact NMR spectroscopy (1)
- Compact spectrometers (1)
- Compartmentalization (1)
- Competence Center (1)
- Competitive Immunoassay (1)
- Complementary MS (1)
- Complexation (1)
- Compound-independent calibration (1)
- Computational fluid dynamics (1)
- Comsumer good samples (1)
- Concentration mapping (1)
- Concentration step (1)
- Conductor-like screening model (1)
- Confiscation (1)
- Confocal laser scanning microscopy (1)
- Conformation (1)
- Conjugates (1)
- Construction (1)
- Construction products (1)
- Consumer Products (1)
- Consumer products (1)
- Contaminated site (1)
- Continuous Manufacturing (1)
- Continuous Processes (1)
- Continuous Sensor (1)
- Continuous processes (1)
- Continuum source atomic absorption spectrometry (1)
- Conventional dyes (1)
- Conventional isotope ratios (1)
- Conventional method (1)
- Converter material (1)
- Cooper (1)
- Coordination polymer (1)
- Coparison study CIC <=> HR-CS-GFMAS (1)
- Copper hydroxide (1)
- Copper-catalyzed (1)
- Core shell structure (1)
- Core-shell (1)
- Core-shell structures (1)
- Core/shell materials (1)
- Core/shell nanoparticle (1)
- Core/shell particle (1)
- Core/shell quantum dot (1)
- Corona virus (1)
- Correlative Imaging (1)
- Coumarin (1)
- Counting detector (1)
- Covalent conjugation (1)
- Cr(III)-Komplex (1)
- Cr-complex (1)
- Cross section (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Crossreactivity (1)
- Croyo-starage (1)
- Crude oil (1)
- Cryo-soft X-ray tomography (1)
- Cryoadsorption (1)
- Cryogenic state (1)
- Cubical shape (1)
- Cucurbituril (1)
- Cuprorivait (1)
- Curcubituril (1)
- Curse tablets (1)
- Customs (1)
- Cyanide (1)
- Cyanide detection (1)
- Cyber-physical Lab (1)
- Cyber-physical Test Labs (1)
- Cyber-physical system (1)
- Cyber-physical systems (1)
- Cyberphysisches Labor (1)
- Cyclic Voltammetry (1)
- Cyclisierung (1)
- Cyclization (1)
- Cycloaddition (1)
- Cyclohexane (1)
- Cyclometalated iridium (III) complexes (1)
- Cytometry (1)
- Cytoplasm (1)
- Cytoplasmic remodeling (1)
- D-glucose (1)
- DC-Arc (1)
- DEA (1)
- DECHEMA (1)
- DHAP (1)
- DLS (1)
- DM1 (1)
- DNA strand breaks (1)
- DNA-Sequence (1)
- DNA-Sequencing (1)
- DOTA (1)
- DPA (1)
- DPSS-laser (1)
- Damage-associated molecular patterns (DAMPs) (1)
- Data Analyses (1)
- Data Fusion (1)
- Data analysis (1)
- Data infrastructures (1)
- Datenerfassung (1)
- Datenintregration (1)
- Dating (1)
- De novo peptide sequencing (1)
- Debromination (1)
- Deep learning-based tools (1)
- Defect photoluminescence (1)
- Degradation of refrigerants (1)
- Degree of damage (1)
- Delta isotope standard (1)
- Dementia (1)
- Dendrimer (1)
- Dendritic polyglycerol sulfate (1)
- Density functional calculations (1)
- Density functional theory (1)
- Density measurement (1)
- Deoxynivalenol (1)
- Depht profiling (1)
- Depth profiles (1)
- Design of experiment (1)
- Design of experiments (1)
- Detection (1)
- Detection dog (1)
- Detector deadtime (1)
- Deterioration (1)
- Deuterium (1)
- Deuterium enriched water (1)
- Development (1)
- Device embedding (1)
- Devices (1)
- Dezentrale Netzwerke (1)
- Diagnostic (1)
- Diagnostic Antibodies (1)
- Diagnostic antibodies (1)
- Diameter (1)
- Diaspore (1)
- Diastolic dysfunction (1)
- Diatom (1)
- Diatom, Bacteria (1)
- Diatomeenanalytik (1)
- Diatomic (1)
- Diatomic molecules (1)
- Diesel (1)
- Diesel exhaust (1)
- Diffuse (1)
- Diffusion (1)
- Difluoressigsäure (1)
- Digital Twins (1)
- Digital holographic cytometry (1)
- Digital holographic microscopy (1)
- Digital immunoassay (1)
- Digital representations (1)
- Digital twin (1)
- Digital twins (1)
- Digital workflows (1)
- Digitalisierung der Prozessindustrie (1)
- Digitization of process industry (1)
- Diode laser (1)
- Dipole moment (1)
- Dipstickassay (1)
- Direct alcohol fuel cells (1)
- Direct loop control (1)
- Direct metal assay (1)
- Direct/indirect photolysis (1)
- Dirithromycin (1)
- Disinfection (1)
- Dispersions (1)
- Dissolution studies (1)
- Dityrosine crosslinking (1)
- Docking (1)
- Dodecanethiol (1)
- Dolomite (1)
- Doppler effect (1)
- Double strands (1)
- Double-pulse laserinduced breakdown spectroscopy (1)
- Down Stream Processing (1)
- Downstream Processing (1)
- Dried fig (1)
- Drogenanalytik (1)
- Drohne (1)
- Droplets (1)
- Druckgasspeicher (1)
- Druckstabilität (1)
- Drug (1)
- Drug Discovery (1)
- Drug discovery (1)
- Drug search (1)
- Drug trafficking (1)
- Drug transporters (1)
- Drugs (1)
- Dual mode detector (1)
- Dual sensing (1)
- Dual-color labeling glycan (1)
- Dual-pulse (1)
- Duftstoffe (1)
- Duplex stainless steels (1)
- Dust sensor (1)
- Dy-654 (1)
- Dyad (1)
- Dyad molecules (1)
- Dye degradation (1)
- Dye labeling (1)
- Dye loading optimisation (1)
- Dye monomers (1)
- Dye release (1)
- Dyes/pigments (1)
- Dynamic calibration gas mixtures (1)
- Düngeempfehlung (1)
- EC/MS (1)
- EC4SafeNano (1)
- ECL (1)
- ECR (1)
- EDTAD (1)
- EE2 (1)
- EI-MS (1)
- ELISAS (1)
- EMN (1)
- EP-3533 (1)
- EPMA (1)
- EPR spectroscopy (1)
- EQS (1)
- ESEM (1)
- ESI MS (1)
- ESMA (1)
- ESR (1)
- ETV (1)
- ETV/ICP-MS (1)
- EU-WFD (1)
- EXAFS (1)
- Early Earth (1)
- Easy-use device (1)
- Echtzeitoptimierungsverfahren (1)
- Ecotoxicity (1)
- Ecotoxicological Assessment (1)
- Ecotoxicological Testing (1)
- Ecotoxicology testing (1)
- Edge Computing (1)
- Education (1)
- Eignungsprüfung (1)
- Einfluß (1)
- Eingnugsprüfung (1)
- Einzelmolekülspektroskopie (1)
- Einzelzellanalyse (1)
- Elastin (1)
- Elastin-specific contrast agent ESMA (1)
- Elastin-specific molecular agent (1)
- Electroanalysis (1)
- Electrocatalysis (1)
- Electrochemical Reactor (1)
- Electrochemical Titration (1)
- Electrochemical energy conversion (1)
- Electrochemical immunosensor (1)
- Electrochemical real-time mass spectrometry (1)
- Electrochemical titration (1)
- Electrochemiluminiscence (1)
- Electrochemistry mass spectrometry (1)
- Electrolytes (1)
- Electron (1)
- Electron Microscopy (1)
- Electron transfer (1)
- Electronic lab notebook (ELN) (1)
- Electrospray (1)
- Electrothermal Vaporization (1)
- Elektrochemilumineszenz (1)
- Elektrolichtbogenofen (1)
- Elektronisches Laborbuch (1)
- Element Specific Bioimaging Using Laser Ablation (1)
- Elemental Impurities (1)
- Elemental analysis (1)
- Elemental composition (1)
- Elemental fingerprints (1)
- Elemental impurities (1)
- Elementspezies & Isotope (1)
- Embedded sensors (1)
- Emergency (1)
- Emerging brominated flame retardant (1)
- Emerging contaminants (1)
- Emerging/novel brominated flame retardant (1)
- Emission enhancement (1)
- Emission reference material (1)
- Emission standard (1)
- Emission test chamber (1)
- Emmbedded sensor (1)
- Enantiomeric excess ee (1)
- Encapsulation (1)
- Encyclopedia of Analytical Chemistry (1)
- Endocrine disrupting chemicals (1)
- Endokriner Disruptor (1)
- Energetic Materials (1)
- Energiespeicherung (1)
- Energy (1)
- Energy Gases (1)
- Energy production (1)
- Energy storage (1)
- Energy systems (1)
- Engineered nanomaterials (1)
- Enrichment (1)
- Ensemble measurements (1)
- Environment-material interactions (1)
- Environmental & life science application (1)
- Environmental Engineering (1)
- Environmental Monitoring (1)
- Environmental monitoring (1)
- Environmental pollution monitoring (1)
- Environmental simulations (1)
- Enyzme (1)
- Enzyme (1)
- Enzyme Immobilisation (1)
- Enzyme-Linked Immunosorbent Assay (1)
- Epifluorescence (1)
- Epigenetics (1)
- Epithelial cell (1)
- Epoxy (1)
- Equilibrium chemical modeling (1)
- Equilibrium isotope fractionation (1)
- Equivalent carbon number (1)
- Error correction (1)
- Ersatzstoffe (1)
- Erythromycin (1)
- Esterification (1)
- Estradiol (1)
- Estrogen (1)
- Ethyl glucuronide (1)
- Ethylenediaminetetraacetic acid (1)
- Etofenprox (1)
- EuroPact (1)
- European Centre (1)
- European Reference Material (1)
- Europium (1)
- Evanescent wave (1)
- Evidential breath alcohol measurement (1)
- Ex vivo (1)
- Excimers (1)
- Excitation path (1)
- Excitation processes (1)
- Exciton (1)
- Exhaust (1)
- Experiment (1)
- Exploratory analysis (1)
- Explosionsschutz (1)
- Explosiven (1)
- Explosives determination (1)
- Expobome (1)
- Exposure (1)
- Expression (1)
- Extracellualr vesicles (1)
- Extraction (1)
- Extraktion (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FLIM (1)
- FTIR spectroscopy (1)
- Fab Fragment (1)
- Faecal contamination (1)
- Fake news (1)
- False Positives (1)
- Farbenlehre (1)
- Farbstoffe (1)
- Faseroptik (1)
- Faseroptische Sensorik (1)
- Fast Fourier Transform (1)
- Fast flow GD (1)
- Fast single pulse response (1)
- Fatty acid desaturation (1)
- Fatty acid synthesis (1)
- Fatty acid uptake (1)
- Fatty acids (1)
- Fe nanoparticles metabolism (1)
- Feature selection (1)
- Feldintegration (1)
- Fenton (1)
- Fenton oxidation (1)
- Fenton’s reagent (1)
- Ferrous oxalate (1)
- Few-layered titanium carbide nanosheets (1)
- Fiber optic sensing (1)
- Fiber-optic laser-induced breakdown spectroscopy (FO-LIBS) (1)
- Fibre-optic sensors (1)
- Field integration (1)
- Field sensor (1)
- Field test (1)
- Film (1)
- First Principles (1)
- Flame retardants (1)
- Flammschutzmittel (1)
- Flexible crystals (1)
- Flourescin (1)
- Flow Chemie (1)
- Flow NMR (1)
- Flow chemistry (1)
- Flow injection immunoassay (1)
- Flowcell (1)
- Fluid dynamic model (1)
- Fluoranthene (1)
- Fluorchlorkohlenwasserstoffe (1)
- Fluorescence Polarisation Immunoassay (1)
- Fluorescence Polarization (1)
- Fluorescence correlation spectroscopy FCS (1)
- Fluorescence detection (1)
- Fluorescence imaging (1)
- Fluorescence intensity ratio (1)
- Fluorescence label (1)
- Fluorescence life time (1)
- Fluorescence quantum yield (1)
- Fluorescence sensor (1)
- Fluorescence standards (1)
- Fluorescent MIPs (1)
- Fluorescent Urea Receptors (1)
- Fluorescent dyes (1)
- Fluorescent glasses (1)
- Fluorescent indicator (1)
- Fluorescent label (1)
- Fluorescent probe (1)
- Fluorescent probes (1)
- Fluorescent sensors (1)
- Fluoresence (1)
- Fluorezsenz (1)
- Fluorides (1)
- Fluorierte Organische Verbindungen (1)
- Fluorine Detection (1)
- Fluorine sum parameter (1)
- Fluoroacetic acid (1)
- Fluorophilic interactions (1)
- Fluorophore (1)
- Fluorophores (1)
- Fluorouracil (1)
- Fluoruos Systems (1)
- Flux Analysis (1)
- Folic acid (1)
- Food Analysis (1)
- Food Safety (1)
- Food contaminants (1)
- Food fermentation (1)
- Food web (1)
- Foodstuffs (1)
- Formulation additives (1)
- Forschungsbedarf (1)
- Forschungsdatenmanagement (1)
- Forschungslandschaft Wasserstoff (1)
- Forschungsstrategie (1)
- Fourier transform spectroscopy (1)
- Fow injection analysis (1)
- Fragment (1)
- Fragmentation (1)
- Fragmentation activation (1)
- Fragmentation pathway (1)
- Freisetzung (1)
- Fresenius (1)
- Fresenius Lecture (1)
- Fresenius lecture (1)
- Friction (1)
- Fuel (1)
- Fuel adulteration (1)
- Fully aromatic frameworks (1)
- Fumonisin (1)
- Functional group analysis (1)
- Functional group quantification (1)
- Functional monomers (1)
- Functionalization (1)
- Functionalized Nanomaterials (1)
- Functionalized nano- and microparticles (1)
- Functionalized silica and polymeric particles (1)
- Fundamental science (1)
- Fungicide (1)
- Fusarium mycotoxin (1)
- GC-MS/MS (1)
- GC/ICP-ToF-MS (1)
- GC/MS (1)
- GC/MS-MS (1)
- GD-MS (1)
- GDCh (1)
- GDOES (1)
- GF-MAS (1)
- GMAW (1)
- Gadolinium-based contrast agent (1)
- Gadolinium-based contrast agents (GBCAs) (1)
- Gadovist (1)
- Galvanic anodes (1)
- Gamma-hydroxybutyric acid (1)
- Gas Analysis (1)
- Gas Reference Material (1)
- Gas Tomography (1)
- Gas purity (1)
- Gas sensor (1)
- Gas solubility (1)
- Gas-phase reactions (1)
- Gaschromatographie (1)
- Gaschromatographie-Massenspektrometrie (1)
- Gasdetektion (1)
- Gaseous reactants (1)
- Gases (1)
- Gasgualität (1)
- Gasreinheit (1)
- Gated delivery systems (1)
- Gated hybrid material (1)
- Gated hybrid materials (1)
- Gated materials (1)
- Gd-DOTA (1)
- Geführte Ultraschallwellen (1)
- Genauigkeit (1)
- General Chemistry (1)
- General Environmental Science (1)
- Genetics (1)
- Genotoxicity testing (1)
- Geochemistry (1)
- Geochemistry and Petrology (1)
- Geological Storage (1)
- Geological thermometer (1)
- Geophysics (1)
- Germanium (1)
- Germanium chloride (1)
- Germanium chlorides (1)
- Germanium sulfide (1)
- Gerätekommunikation (1)
- Gesamtcyanid (1)
- Gesteuerten Nanopartikeln (1)
- Ggadolinium (1)
- Github (1)
- Glasmonolith (1)
- Glass Support (1)
- Glass structure (1)
- Glasspeicher (1)
- Glow Discharge (1)
- Glow discharge optical emission spectroscopy (1)
- Glow-discharge (1)
- Glucose (1)
- Glycan (1)
- Glycans (1)
- Glycosaminoglycan (1)
- Goethe (1)
- Gold nanoclusters (1)
- Gold nanocubes (1)
- Gold particles (1)
- Gold-Nanopartikel (1)
- Grafting (1)
- Grand challenges (1)
- Graphene quantum dots (1)
- Graphit (1)
- Grass pollen (1)
- Gravimtric isotope mixtures (1)
- Grazing incidence small-angle neutron scattering (1)
- Greek curse tablets (1)
- Green light excitation (1)
- Green synthesis (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Ground water (1)
- Groundwater (1)
- Group profile (1)
- Größenausschlusschromatographie (1)
- Guanidine benzoxadiazole (1)
- Guanidinium receptors (1)
- GxP (1)
- HAXPES (1)
- HCD (1)
- HF free Digestion (1)
- HLA (1)
- HMX (1)
- HPLC-DAD/FLD (1)
- HPLC-ICP-MS (1)
- HPLC–MS (1)
- HPSEC (1)
- HR-EI-MS (1)
- HT22 (1)
- Hafnium (1)
- Halomonas elongata (1)
- Hand-held (1)
- Handbook (1)
- Handheld (1)
- Handheld device (1)
- Handheld sensors (1)
- Hapten design (1)
- Hard protein corona (1)
- Hay fever (1)
- Hazard Detection (1)
- Hazardous substances (1)
- HeLa (1)
- Heart attack (1)
- Heat accumulation (1)
- Heat capacity (1)
- Heat flow (1)
- Heat-transfer Measurements (1)
- Heating oil storage tanks (1)
- Heavy chains (1)
- Heavy crude oil (1)
- Heavy metals (1)
- Hemihydrate (1)
- Henry's law constant (1)
- Heory (1)
- Hepatocellular carcinoma (1)
- Heterogeneous catalysis (1)
- Heterologous hapten (1)
- HexaHis-Tag (1)
- Hexabenzocoronenes (1)
- High entropy alloy (1)
- High pH (1)
- High pressure experiments (1)
- High purity (1)
- High purity material (1)
- High repetition rate (1)
- High repetition-rate (1)
- High throughput (1)
- High-Speed (1)
- High-Speed Separations (1)
- High-fired gypsum (1)
- High-frequency arc discharge (1)
- High-pressure solubility (1)
- High-pressure volumetric analyzer (HPVA) (1)
- High-purity elements (1)
- High-resolution (1)
- High-resolution absorption isotopic spectrometry (1)
- High-resolution continuum source atomic absorption spectrometer (1)
- High-resolution continuum source graphite furnace atomic absorption spectrometry (1)
- High-resolution continuum source molecular absorption spectrometry (1)
- High-resolution imaging (1)
- High-resolution transmission electron microscopy (1)
- High-throughput (1)
- Highspeed (1)
- His6 (1)
- His8 (1)
- Histidine (1)
- Historical Developments (1)
- Hochauflösende continuum source-Graphitrohr Molekülabosprtionsspektrometrie (HR-CS-GFMAS) (1)
- Hochauflösende-continuum source Graphitrohr Molekülabsorptionsspektrometrie (HR-CS-GFMAS) (1)
- Hochdurchsatzscreening (1)
- Holographic microscopy (1)
- Homogeneity (1)
- Horizon 2020 (1)
- Hormone (1)
- Host-guest interaction (1)
- Hot electrons (1)
- Hot-electrons (1)
- Hot-pressing (1)
- Human Plasma (1)
- Human antibodies (1)
- Human antibody (1)
- Human leukocyte antigen (HLA) (1)
- Human plasma (1)
- Human serum albumin (1)
- Humic matter (1)
- Hybridization (1)
- Hydrated silicate melts (1)
- Hydrazin (1)
- Hydrochloric acid (1)
- Hydrodynamic chromatography (HDC) (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Metrology (1)
- Hydrogen Purity (1)
- Hydrogen Storage Materials (1)
- Hydrogen Strategy (1)
- Hydrogen adsorption (1)
- Hydrogen adsorption storage (1)
- Hydrogen analysis (1)
- Hydrogen cryostorage (1)
- Hydrogen storage (1)
- Hydrogen uptake reproducibility (1)
- Hydrogen-containing gas mixture (1)
- Hydrogen-containing mixture (1)
- Hydrogen-containing mixtures (1)
- Hydrogen-containing natural gas (1)
- Hydrogen-enriched natural gas (1)
- Hydrogenierung (1)
- Hydrolyseprodukte (1)
- Hydrophilic ionic liquid (1)
- Hydrothermal fluid (1)
- Hydroxy warfarin (1)
- Hydroxylation (1)
- Hyperbranched polymer (1)
- Hyperspectral data (1)
- Hyperspectral imaging (1)
- Hyphenated (1)
- Hypothalamus (1)
- IC (1)
- IC50 (1)
- ICH guideline Q3D (1)
- ICP (1)
- ICP MS (1)
- ICP-AES (1)
- ICP-MS & HR-CS-GFMAS (1)
- ICP-MS/MS (1)
- ICP-TOFMS (1)
- ID-MS (1)
- IEC (1)
- IMAC purification (1)
- IR spectroscopy; conductometry (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- ISO REMCO (1)
- ISO/IEC 17025 (1)
- ISO/TC 229 Nanotechnologies (1)
- IT (1)
- IT-OT-Testplattform (1)
- IUTA (1)
- IgE (1)
- IgG determination (1)
- IgY (1)
- Igg (1)
- Iinductively coupled plasma mass spectrometry (1)
- Iinterlaboratory comparison (1)
- Iisotopic signature (1)
- Illicit drug (1)
- Illumina (1)
- Image Segmentation (1)
- Imaging Mass Cytometry (1)
- Imaging Technique (1)
- Imaging mass cytometry (1)
- Imaging system (1)
- Imaging techniques (1)
- Imidazole (1)
- Immunassay (1)
- Immunglobulin (1)
- Immunglobuline (1)
- Immuno assay (1)
- Immuno-Assays (1)
- Immunoaffinity (1)
- Immunochemical response optimization (1)
- Immunofluorescence (1)
- Immunoglobulin E (1)
- Immunology (1)
- Immunometric assay (1)
- Immunometric biosensor (1)
- Immunpräzipitation (1)
- Impact (1)
- Impedanz (1)
- Impfstoffe (1)
- Imprinting (1)
- Impurity assessment (1)
- Impurity assessment approach (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ measurement (1)
- In vitro (1)
- In vitro imaging (1)
- In vivo (1)
- In-house calibration solution (1)
- In-situ analysis (1)
- In-situ process monitoring (1)
- In-vivo (1)
- Indicator displacement assay (1)
- Indicators (1)
- Inductively Coupled Mass Spectroscopy (1)
- Inductively coupled plasma (1)
- Inductively coupled plasma mass spectroscopy (1)
- Inductively coupled plasma-mass spectrometry (1)
- Inductively‑coupled mass spectrometry (1)
- Industrial Internet of Things (IIoT) (1)
- Industrial gypsum (1)
- Industrielle Analytik (1)
- Industry 4.0, (1)
- Inert gases (1)
- Informations- und Kommunikationstechnik (1)
- Infrared Thermography (1)
- Infrared light (1)
- Infrared thermography (1)
- Infrastructure (1)
- Inhalation exposure (1)
- Inhibition (1)
- Inline Analytics (1)
- Inline NMR Spectroscopy (1)
- Inline measurement (1)
- Innovationen (1)
- Inorganic Reference Materials (1)
- Inorganic chemical analysis (1)
- Inorganic impurities (1)
- Insecticide (1)
- Instrument Communication (1)
- Instrumental isotope fractionation (1)
- Instrumentation (1)
- Integrated Processes (1)
- Integrating sphere spectroscopy, (1)
- Integration sphere spectroscopy (1)
- Inter layer time (1)
- Interdisciplinary research (1)
- Interferometric spectroscopy (1)
- Interlaboratory key comparison (1)
- Interlabority comparison (1)
- Intermediate phases (1)
- Intermixing (1)
- Internal standard (1)
- Internal standards (1)
- International drug trade (1)
- Invertebraten (1)
- Ion mobility (1)
- Ionic Liquids (1)
- Ionmobility spectrometry (1)
- Ionophore (1)
- Ionophore Antibiotics (1)
- Ionophore antibiotic (1)
- Ionophore antibiotics (1)
- Iposomes (1)
- Iridium (1)
- Iron Complex (1)
- Iron deficiency (1)
- Iron isotope fractionation (1)
- Iron isotopes (1)
- Iron nanoparticles (1)
- Isolithocholic Acid (1)
- Isotope Labelling (1)
- Isotope anaylsis (1)
- Isotope dilution analysis (1)
- Isotope mixtures (1)
- Isotope purification (1)
- Isotope-dilution (1)
- Isotope-labeled (1)
- Isotopic dilution (1)
- Isotopic fingerprints (1)
- Isotopically enriched nanomaterials (1)
- Isotopologue Distribution (1)
- Iterative real-time optimization (1)
- JNP POLMO (1)
- Java GUI (1)
- Job plot (1)
- Joung Analysts (1)
- K+ doped (1)
- Kalibriertransfer (1)
- Kapillarelektrophorese-Massenspektrometrie (1)
- Katalysator (1)
- Kerosene (1)
- Kidney (1)
- Kilogram (1)
- Kinetic isotope fractionation (1)
- Kinetics (1)
- Kjeldahl (1)
- Klimaerwärmung (1)
- Klon A1.1.1 (1)
- Klon EW75C (1)
- Kläranlage (1)
- Knowledge graphs (1)
- Kokain (1)
- Kolorimetrische Sensoren (1)
- Kommunikation (1)
- Kompetenzzentrum H2Safety@BAM (1)
- Komplementäre Massenspektrometrie (1)
- Kompost (1)
- Konjugate (1)
- Konnektivität (1)
- Kopplungstechniken (1)
- Korrelationsmatrix (1)
- Kreuzreaktion (1)
- Kristallolgraphie (1)
- Künstliche Intelligenz (1)
- Künstliche Neuronale Netze (1)
- Künstlicher Intelligenz (1)
- L-alanine (1)
- L-phenylalanin (1)
- LA-(MC-)ICP-MS (1)
- LA-ICP-SFMS (1)
- LA/ICP-MS Imaging (1)
- LAMIS (1)
- LC-MS/MS peptide quantification (1)
- LC-UV absorbance (1)
- LC/HRMS (1)
- LC/MS-MS (1)
- LED-induzierte Fluoreszenz (1)
- LIDB plasma (1)
- LIP-AAS (1)
- LIP-LIF (1)
- LSVEC (1)
- LT-FCM (1)
- Lab on a Chip (1)
- Lab on a chip (1)
- Lab-on-valve (1)
- Label-free detection (1)
- Labels (1)
- Labor 4.0 (1)
- Labor der Zukunft (1)
- Labor-IT (1)
- Labor-Robotik (1)
- Laborautomation (1)
- Laborkommunikation (1)
- Lactate (1)
- Lacunary Keggin ion (1)
- Ladder sequencing (1)
- Lanthanide Nanocrystals (1)
- Lanthanide nanoparticle (1)
- Lanthanide-doped nayf-4 (1)
- Lanthanoid (1)
- Large-scale synthesis (1)
- Lasalocid (1)
- Laser Ablation Molecular Absorption spectrometry (1)
- Laser Ablation/Imaging (1)
- Laser Desorption (1)
- Laser ablation inductively coupled plasma–mass spectrometry imaging (LA-ICP-MSI) (1)
- Laser ablation-inductively coupled plasma-mass spectrometry (1)
- Laser ablation-inductively coupled plasma-mass spectroscopy (1)
- Laser induced XUV spectroscopy (1)
- Laser induced breakdown (1)
- Laser induced breakdown Spectrocopy (LIBS) (1)
- Laser induced dielectric breakdown, Hydrogen reduction (1)
- Laser metal deposition (LMD) (1)
- Laser powder bed fusion (1)
- Laser spectroscopy (1)
- Laser-Induced Breakdown Spectroscopy (LIBS) (1)
- Laser-Induced Plasma (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-induced Breakdown Spectroscopy (1)
- Laser-induced XUV Spectroscopy (1)
- Laser-induced breakdown spectroscopy (LIBS) (1)
- Laser-induced dielectric breakdown (LIDB) (1)
- Laser-induced fluorescence (1)
- Laser-spark ionization (1)
- Laserauftragschweißen (1)
- Lasers (1)
- Lastwechsel (1)
- Lateral Flow Immunoassay (1)
- Lateral flow assays (1)
- Lateral flow immunoassays (1)
- Lateral flow tests (1)
- Latex particles (1)
- Layer-by-Layer (1)
- Layers (1)
- Lead (1)
- Lead isotope composition (1)
- Lead isotope ratios (1)
- Lead isotope variations (1)
- Lead isotopes (1)
- Lead-free (1)
- Lebensmittel (1)
- Lebensmittelanalytik (1)
- Leckdetektion (1)
- Legionella (1)
- Li-ion battery (1)
- LiYF4 (1)
- Library (1)
- Lichtstreuung (1)
- Lifetime analysis (1)
- Lifetime encoding (1)
- Lifetime standard (1)
- Lifetime, synthesis (1)
- Lifetime-encoded beads (1)
- Lifetime-encoding (1)
- Ligand exchange (1)
- Ligand quantification (1)
- Ligation Assay (1)
- Light chain (1)
- Light chains (1)
- Light harvesting (1)
- Lightning talk (1)
- Linear Regression (1)
- Linear dynamic range (1)
- Lipid metabolism (1)
- Lipids (1)
- Liquefied natural gas-like mixtures (1)
- Liquid chromatography-mass spectrometry (1)
- Lithiation (1)
- Liver X receptor (1)
- Lluminescence (1)
- Locked nucleic acids (1)
- Longst luminescence lifetime (1)
- Low field nmr (1)
- Low-Energy (1)
- Luminescence lifetime (1)
- Luminescence lifetime measurments (1)
- Luminescent lifetime (1)
- Luorescence (1)
- Lymnaea stagnalis (1)
- Lysergic acid hydrazide (1)
- Lysosome (1)
- MALDI-TOF (1)
- MALDI-TOF mass spectrometry (1)
- MALDI-ToF-MS (1)
- MBA (1)
- MC-LIBS (1)
- MC-TIMS (1)
- MCR (1)
- MDG ICP-ToF-MS (1)
- MKW (1)
- MLCT (1)
- MMAE (1)
- MOF databases (1)
- MOF´s (1)
- MOSH/MOAH (1)
- MR Angiography (1)
- MR imaging (1)
- MS (1)
- MS-ICP-MS (1)
- MW-AES (1)
- MXenes (1)
- Machine-Assisted Workflows (1)
- Macrocyclus (1)
- Macrolide antibiotics (1)
- Macrophage (1)
- Magnesium carbonates (1)
- Magnesium delta values (1)
- Magnesium monofluoride (1)
- Magnetic (1)
- Magnetic Particles (1)
- Magnetically stabilized (1)
- Magnetophoresis (1)
- Maillard reaction (1)
- Makrolide (1)
- MamaLoCa (1)
- Mammals (1)
- Mangesium (1)
- Manufacturing (1)
- Martensitic steel (1)
- Mass Isotopomer Distribution (1)
- Mass spectroscopy (MS) (1)
- Mass-spectrometry (1)
- Material - Environment interaction (1)
- Material Science (1)
- Material-binding Peptides (1)
- Materials emissions testing (1)
- Materials informatics (1)
- Matrix independent calibration (1)
- Matrix separation (1)
- Matrix-assisted laser desorption ionization–mass spectrometry imaging (MALDI-MSI) (1)
- Matrixeffekte (1)
- Measurement space (1)
- Measuremment uncertainty (1)
- Mechanical properties (1)
- Medicinal application (1)
- Medicinal plants (1)
- Medicinal products (1)
- Medium entropy alloy (1)
- Meer (1)
- Melanoidin (1)
- Melanoidine (1)
- Melt Flow Rate (MFR) (1)
- Mercury solution (1)
- Mercury speciation (1)
- Merocyanine (1)
- Mertansine (1)
- Meso Portland cement (1)
- Mesocosm (1)
- Mesofluidics (1)
- Mesoporous particles (1)
- Mesoporous silica (1)
- Mesoporöses Silica (1)
- Meta-study (1)
- Metabolic Flux (1)
- Metabolism (1)
- Metabolismus (1)
- Metabolite quantification (1)
- Metabolization (1)
- Metal (1)
- Metal assay approach (1)
- Metal complex (1)
- Metal complexes (1)
- Metal labeling (1)
- Metal nanoclusters (1)
- Metal nanoparticles (1)
- Metal sublimation (1)
- Metal-Organic Framework (1)
- Metal-Tag (1)
- Metal-organic frameworks (MOFs) (1)
- Metal-tag (1)
- Metalle (1)
- Metal–organic framework (1)
- Metasurface (1)
- Methanol oxidation (1)
- Methodenentwicklung (1)
- Methodenvergleich (1)
- Methos comparision (1)
- Methylanilines (1)
- Metrologie zur Wasserstoffspeicherung (1)
- Metrology in Chemistry (1)
- Metrology institute (1)
- Micro Reactor (1)
- Micro-Hydrocyclone (1)
- Micro-chamber (1)
- Micro-sublimation (1)
- Microbial (1)
- Microbially induced corrosion (1)
- Microdialysis (1)
- Microemulsion (1)
- Microfluidic Chip (1)
- Microfluidic system (1)
- Micrometeorites (1)
- Microorganism (1)
- Microplastic-induced effects (1)
- Microplatic (1)
- Microresonator (1)
- Microscope slides (1)
- Microstructure (1)
- Microwave plasma (1)
- Microwave-assisted synthesis (1)
- Migration (1)
- Mikrobiell (1)
- Mikromischer (1)
- Mikroparticles (1)
- Mikroskopie (1)
- Milk (1)
- Miller and Urey (1)
- Mineral oil hydrocarobons (1)
- Mineralthermometer (1)
- Mineralölkohlenwasserstoffe (1)
- Mini-UAV (1)
- Missing fragmentation sites (1)
- Mixed surface (1)
- Mixture toxicity (1)
- Mmoisture (1)
- MoF6 (1)
- Mobile Robotic Olfaction (1)
- Mobile analysis (1)
- Mobile analytics (1)
- Mobile device (1)
- Model Predictive Control (1)
- Modellbasierte Optimierung (1)
- Modification (1)
- Modified mycotoxins (1)
- Modifier adaptation (1)
- Modifier-Adaptation (1)
- Mole (1)
- Molecular Biology (1)
- Molecular Imprinting (1)
- Molecular MRI (1)
- Molecular Organic Frameworks (1)
- Molecular analysis (1)
- Molecular dynamics simulations (1)
- Molecular emission (1)
- Molecular imprinted polymers (1)
- Molecular marker (1)
- Molecular spectra (1)
- Molecular spectrum (1)
- Molecular-MRI (1)
- Molecularly Imprinted Polymer (1)
- Molecule (1)
- Molecules formation (1)
- Molybdenum (1)
- Molybdenum carbide (1)
- Monensin (1)
- Monoamine oxidase B (1)
- Monoclonal Antibody (1)
- Monoelemental solutions (1)
- Monolithic material (1)
- Monomethyl Auristatin E (1)
- Monte Carlo algorithm (1)
- Mounting media (1)
- Moxidectin (1)
- Multi-collector inductively coupled plasma-mass spectrometry (ICP-MS) (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multicolored (1)
- Multielemental analysis (1)
- Multielementanalytik (1)
- Multielementanalytik in kurzen transienten Signalen (1)
- Multifunctional efficiency (1)
- Multigassensorik (1)
- Multimodale Analytik (1)
- Multiple sclerosis (1)
- Multiple-injection sample-standard bracketing (1)
- Multiplet (1)
- Multiplexed assay (1)
- Multiplexing detection (1)
- Multivariate (1)
- Multivariate Datenauswertung (1)
- Multivariate Statistics (1)
- Multivariate analysis (1)
- Multivariate methods (1)
- Munition (1)
- Murchison meteorite (1)
- Mutationen (1)
- Mycotoxin Analysis (1)
- Mycotoxin-Biomarker (1)
- Mykotoxin (1)
- Mykotoxin-Biomarker (1)
- N-capsid (1)
- NAMUR Open Architecture (NOA) (1)
- NDT (1)
- NIR Spectroscopy (1)
- NIR dyes (1)
- NIR emitter (1)
- NIR-I (1)
- NIR-II Imaging (1)
- NIR-II fluorescence (1)
- NIRII (1)
- NIST (1)
- NIST-mAb 8671 (1)
- NMR Accreditation (1)
- NMR Method Validation (1)
- NMR Spektroskopie (1)
- NMR spetroscopy (1)
- NMR validation (1)
- NSE (1)
- NSO-Heterozyklen (1)
- NaCl-Methode (1)
- Nanaoparticle (1)
- Nanaoparticles (1)
- Nano CRM (1)
- Nano-carrier (1)
- Nano-safety (1)
- Nano@BAM (1)
- NanoPlattform (1)
- Nanobody (1)
- Nanocluster (1)
- Nanodiamant (1)
- Nanogenotoxicity (1)
- Nanohybrid (1)
- Nanolenses (1)
- Nanomanufacturing (1)
- Nanomaterial design (1)
- Nanomedicine (1)
- Nanoparticle dimers (1)
- Nanophotonics (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanorods (1)
- Nanosafety (Safe-by-design) (1)
- Nanoscale luminescent reporters (1)
- Nanoscience (1)
- Nanosciences (1)
- Nanosensors (1)
- Nanospheres (1)
- Nanostructures (1)
- Nanotechnology (1)
- Naphthalene (Nap) (1)
- Narcotics (1)
- Nb2O5, NbO2F, Nb3O7F (1)
- Nd excitation (1)
- Near infrared (1)
- Near-infrared (1)
- Near-infrared light (1)
- Neoallergen (1)
- Neodymium (1)
- Neoepitopes (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Neutral dyes (1)
- Neutralisierende Antikörper (1)
- Neutron reflectometry (1)
- New ecotoxicological testing tools (1)
- Next Generation Sequencing (1)
- Nicht lineare Prozesse (1)
- Nichtmetall-Analytik (1)
- Nichtmetalle (1)
- Nickel chelate (1)
- Nickel foam (1)
- Niederfeld-NMR-Spektroskopie (1)
- Nile Red (1)
- Niobcarbid (1)
- Nitroaromaten (1)
- Nitrogen dioxide (1)
- Nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (1)
- Nitrogen monoxide (1)
- Nitromoschus (1)
- Nnano particle (1)
- Nnanoparticle (1)
- Noise (1)
- Nomaterials (1)
- Non lienear processes (1)
- Non metals (1)
- Non-classical crystallization (1)
- Non-metals analysis (1)
- Non-target (1)
- Non-targeted analysis (1)
- Non-thermally coupled levels (1)
- Nonspecific binding (NSB) (1)
- Nontargeted approach (1)
- Normative guidelines (1)
- North Sea (1)
- Nuclear Magnetic Resonance (1)
- Nuclear magnetic resonance (1)
- Nuclear magnetic resonance spectroscopy (1)
- Nuclear receptor (1)
- Nucleocapsid (1)
- Nucleocapsid-Protein (1)
- OBOC (1)
- OPC-UA (1)
- OT (1)
- Oberflächen verstärkte Raman Streuung (1)
- Oberflächenwasser und Boden (1)
- Obituary (1)
- Ocean acidification (1)
- Odour (1)
- Oil analysis (1)
- Oil spills (1)
- Old nanocrystal (1)
- Oleandomycin (1)
- Oligo (1)
- Oligomerization (1)
- Oligonucleotide (1)
- Oligonucleotide fragmentation (1)
- Oligonucleotides (1)
- Olive oil (1)
- On-chip screening (1)
- On-line CE/MC-ICP-MS (1)
- On-site detection (1)
- One-bead-one-compound library (1)
- One-pot synthesis (1)
- Online Sensing (1)
- Online biosensor (1)
- Online detection (1)
- Online fluorescence (1)
- Online software (1)
- Online-NMR spectroscopy (1)
- Online-RFA-Spektroskopie (1)
- Online-Referenzmethode (1)
- Ontologies (1)
- Open Source (1)
- Open science (1)
- OpenBIS (1)
- Operational Technology (1)
- Optical Assays (1)
- Optical Emission Spectroscopy (1)
- Optical Spectrometry (1)
- Optical imaging (1)
- Optical isotopic spectrometry (1)
- Optical probes (1)
- Optical properties (1)
- Optical sensing (1)
- Optical spectrometry (1)
- Optical spectroscopie (1)
- Optical temperature sensing (1)
- Optically active surfaces (1)
- Optics (1)
- Optimization (1)
- Optische Emissionsspektroskopie (1)
- Optische Emissionsspektroskopie (OES) (1)
- Optoelectronic (1)
- Optofluidics (1)
- Ordinary Portland cement (1)
- Ore provenance (1)
- Organic Synthesis (1)
- Organic calibration solution (1)
- Organic polymers (1)
- Organic-inorganic hybrid composites (1)
- Organically bound fluorine (1)
- Organic–inorganic nanostructures (1)
- Organophosphate esters (1)
- Organotin compounds (1)
- Osmotic minipumps (1)
- Ovarian cancer (1)
- Oxidative metabolism (1)
- Oxygen evolution reaction (1)
- Oxygen isotope ratios (1)
- Oxygen sensing (1)
- Oxygen sensitive (1)
- PAH (1)
- PAHs (1)
- PAK (1)
- PARCI-MS (1)
- PAT (1)
- PCB (1)
- PCE (1)
- PCR (1)
- PECVD (1)
- PEG ligands (1)
- PEGomics (1)
- PEM-Wasserelektrolyse (1)
- PETN (1)
- PFAS Analysis (1)
- PFAS TOP Assay soil contamination (1)
- PFC (1)
- PFOA (1)
- PH monitoring in concrete (1)
- PH probe (1)
- PH-sensing (1)
- PIC technology (1)
- PLS-DA (1)
- PLS-R (1)
- PP (1)
- PRORA (1)
- PS (1)
- PSA (1)
- Packing density (1)
- Paint (1)
- Pants (1)
- Paper based devices (1)
- Parameter optimization (1)
- Parkinsons's disease (1)
- Partial least square discriminant analysis (PLS-DA) (1)
- Partial least squares regression (PLSR) (1)
- Particle Characterization (1)
- Particle architecture (1)
- Particle characterization (1)
- Particle modification (1)
- Particle quantum dot (1)
- Particle sensors (1)
- Particle, imaging (1)
- Particulate matter (1)
- Partikelgrößenbestimmung (1)
- Partikelkonzentration (1)
- Partikeln (1)
- Passivation shell (1)
- Pattern recognition receptor (1)
- Payload (1)
- Pb isotopes (1)
- Pd(II) (1)
- Peak overlap (1)
- Peatlands (1)
- Peer review (1)
- Penicillin (1)
- Pentaphenes (1)
- Peptid-Aptamer (1)
- Peptid-Synthese (1)
- Peptidbibliothek (1)
- Peptidbibliotheken (1)
- Peptide aptamers (1)
- Peptide binder (1)
- Peptide coverage (1)
- Peptide folding (1)
- Peptide library screening (1)
- Peptide losses (1)
- Peptide nucleic acid (1)
- Peptide probe (1)
- Peptides and Proteins (1)
- Peptidsequenzierung (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Perceived intensity (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Periodate oxidation (1)
- Periplasma (1)
- Peristaltic pumps (1)
- Perovskites (1)
- Perowskit (1)
- Perturbed-Chain Statistical Association Fluid Theory (1)
- Pesticides (1)
- Pestizid (1)
- Petrol (1)
- Petroleum (1)
- Pflanzenverfügbarkeit (1)
- Pflanzenwachstum (1)
- Ph (1)
- Phage Display (1)
- Phage display (1)
- Pharmaceutical (1)
- Pharmaceutical Drugs (1)
- Pharmaceutical Science (1)
- Pharmaceutical drugs (1)
- Pharmacopea (1)
- Pharmacopoeial Reference Standards (1)
- Pharmazeutika (1)
- Pharmazeutische Produktion (1)
- Phase (1)
- Phase Equilibria (1)
- Phase Imaging (1)
- Phenanthrene (1)
- Phenothrin (1)
- Phenylketonuria (1)
- Phl p 5 (1)
- Phleum pratense (1)
- Phorsphorescence (1)
- Phosphinine (1)
- Phospholipids (1)
- Phosphonic acids (1)
- Phosphorescence (1)
- Phosphorus (1)
- Phosphorus elimination (1)
- Phosphorus recovery (1)
- Phosphorylated Tyrosine (1)
- Photo-transformation products (1)
- Photocatalyst (1)
- Photocatalytic reduction (1)
- Photodynamische Inaktivierung (1)
- Photoinduced Electron Transfer (1)
- Photoinduced electron transfer (1)
- Photokatalyse (1)
- Photon bunching (1)
- Photonic Integrated Circuits (1)
- Photonic Sensor (1)
- Photonic biosensor (1)
- Photophysic (1)
- Photopolymerization (1)
- Photosensibilisator (1)
- Photosensitization (1)
- Photosensitizer (1)
- Photostability (1)
- Phthalate substitutes (1)
- Phthalocyanin (1)
- Physical Chemistry (1)
- Physical and theoretical chemistry (1)
- Physical twin (1)
- Physico-chemical characterisation of minerals (1)
- Phytoliths (1)
- Pigments (1)
- Planck function (1)
- Planetary science (1)
- Plant tissue (1)
- Plant virus (1)
- Plant-model mismatch (1)
- Plasma chemical reactor (1)
- Plasma expansion (1)
- Plasma fundamentals (1)
- Plasma imaging (1)
- Plasma induced luminescence (1)
- Plasma reheating (1)
- Plasma-induced luminescence (1)
- Plasmaspectrochemistry (1)
- Plasmon-catalyzed reactions (1)
- Plasmonic heating (1)
- Plastic deformation (1)
- Plastics (1)
- Poficiency test (1)
- Point-Of-Care-Diagnostics (1)
- Point-of-Care (1)
- Polarised light microscopy (1)
- Polishing (1)
- Pollen (1)
- Pollen extract (1)
- Polyclonal Antibodies (1)
- Polyclonal antibodies (1)
- Polycyclic aromatic hydrocarbons (1)
- Polyelektrolyt (1)
- Polyethylene (1)
- Polyethylene Glycol (1)
- Polyethylene glycol (1)
- Polyethylenimine (1)
- Polymer membrane (1)
- Polymer nanolayers (1)
- Polymer particle (1)
- Polymer-based products (1)
- Polymer-binding Peptides (1)
- Polymere (1)
- Polymerwissenschaften (1)
- Polyoxometalates (1)
- Polystyrene (1)
- Polystyrene microparticles (1)
- Polyurethane (1)
- Polyurethanes (1)
- Pore fluids (1)
- Pore water quality (1)
- Porosity (1)
- Porous rock (1)
- Portable (1)
- Portable Analytik (1)
- Portland cement (1)
- Portland clinker (1)
- Portugal (1)
- Positionspapier (1)
- Poster presentation (1)
- Potash (1)
- Pouch cell (1)
- Powder X-ray diffraction (1)
- Power-to-Gas (1)
- Pozessindustrie (1)
- Pphotophysics (1)
- Pprocess analytical technology (1)
- Prebiotic chemistry (1)
- Precision Agriculture (1)
- Precision Profile (1)
- Precision agriculture (1)
- Precision farming (1)
- Precision polymer sequencing (1)
- Preprocessing (1)
- Pressurized liquid extraction (1)
- Priam's treasure (1)
- Primary calibration solution (1)
- Primary difference measurement method (PDM) (1)
- Primary standard (1)
- Primary transfer standards (PTSs) (1)
- Primer (1)
- Primordial soup (1)
- Primäre Kalibriersubstanzen (1)
- Priority effect (1)
- Prisma (1)
- ProMoAM (1)
- Probe diagnostics (1)
- Procee Analytical Technology (1)
- Process Analytical Tecnology (1)
- Process analytics (1)
- Process intelligence (1)
- Process sensors (1)
- Process sensors 4.0 (1)
- Process-NMR (1)
- Process-spectroscopy (1)
- ProcessNet (1)
- Proficiency Test (1)
- Proficiency Testing (1)
- Proficiency testing (1)
- Programmed cell death (1)
- Programming (1)
- Proinflammatory cytokines (1)
- Protein Purification (1)
- Protein a (1)
- Protein content (1)
- Protein degradation (1)
- Protein engineering (1)
- Protein folding (1)
- Protein g (1)
- Protein imaging (1)
- Protein immobilization (1)
- Protein interaction (1)
- Protein oligomerization (1)
- Protein oligomers (1)
- Protein test (1)
- Protein-modification (1)
- Proteine (1)
- Proteinmodifikation (1)
- Proteinoid (1)
- Prouess-Sensoren 4.0 (1)
- Provenancing (1)
- Proximal soil sensing (1)
- Prozess-Sensoren 4.0 (1)
- Prozess-Steuerung (1)
- Prozessanalysentechnik (1)
- Prozesslabor (1)
- Prozessmonitoring (1)
- Prussian blue (1)
- Präzision (1)
- Präzisionsprofil (1)
- Pseudo peptides (1)
- Pseudomonas aeruginosa (1)
- Pseudomonas fluorescens (1)
- Pt(111) (1)
- Pt(II) (1)
- Pt-based drugs (1)
- PtNP (1)
- Public Health, Environmental and Occupational Health (1)
- Pulsed-GD-SFMS (1)
- Pulverization (1)
- Purity determination (1)
- Pyrethroid (1)
- Pyrethroids detection (1)
- QC (1)
- Qantum yield (1)
- Qdots (1)
- QuEChERS (1)
- Quadratic approximation (MAWQA) (1)
- Qualitative analysis (1)
- Quality Management (1)
- Quality assurance/quality control (1)
- Quality assurancemechanism (1)
- Quality assurcance (1)
- Quality by Design (1)
- Qualitätskontrolle (1)
- Qualitätssicherung (1)
- Quantenausbeute (1)
- Quantitative bioimaging (1)
- Quantitative determination (1)
- Quantum Dot-Rod (1)
- Quantum Mechanics (1)
- Quantum Yields (1)
- Quantum chemistry (1)
- Quantum do (1)
- Quantum dot-rod (1)
- Quantum state (1)
- Quantum yield standard (1)
- Quartz (1)
- Quinones (1)
- RASEM (1)
- RDX (1)
- REACH (1)
- REMCO (1)
- REMPI (1)
- RF ICP discharge (1)
- RF-LIBS combination (1)
- RF-arc discharge (1)
- RIchtigkeit (1)
- RNA (1)
- RNA-templated reactions (1)
- Racemate (1)
- Radiation damage (1)
- Radicals (1)
- Radiogenic isotopes (1)
- Radiosensitization (1)
- Radon reconstruction (1)
- Radon transformation (1)
- Rainwater (1)
- Raman band width (1)
- Raman band width determination (1)
- Raman microscopy (1)
- Raman-spectroscopy (1)
- Ramanspektroskopie (1)
- Rapid prototyping (1)
- Rapid testing (1)
- Rapid testing methods (1)
- Rare-Earth elements (Tm3+) (1)
- Rat/human liver microsomes (1)
- Ratiometric Sensors (1)
- Ratiometric fluorescence (1)
- Ratiometric measurement (1)
- Ratiometric sensing (1)
- Rational design (1)
- Reaction dynamics (1)
- Reaction monitoring (1)
- Reactor control (1)
- Reaktionsmonitoring (1)
- Real-time Process Monitoring (1)
- Real-time imaging (1)
- Real-time measurement (1)
- Real-time quality control (1)
- Recombinant (1)
- Recombinant Antibody (1)
- Recombinant antibody (1)
- Recombinant protein (1)
- Record luminescence quantum yield (1)
- Recovery (1)
- Red mud (1)
- Redox (1)
- Redox reactions (1)
- Redox switch (1)
- Reduced graphene oxide (1)
- Reduction of MoF6 (1)
- Reduction of volatile chlorides and fluorides by hydrogen (1)
- Reduktionsprozess (1)
- Reference (1)
- Reference Materials (1)
- Reference measurements (1)
- Reference methods (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference particles (1)
- Reference procedure (1)
- Reference procedures (1)
- Reference standards (1)
- References (1)
- Reflection (1)
- Reflection spectroscopy (1)
- Regel- und Messtechnik (1)
- Reinigung (1)
- Reinstmetalle (1)
- Reinststoffe (1)
- Rekombinante Antikörper (1)
- Rekord Luminescence Quantum Ausbeute (1)
- Release (1)
- Release kinetics (1)
- Reliable characterization (1)
- Remediation (1)
- Remote detection (1)
- Renewable copolymers (1)
- Renewable energy (1)
- Replication (1)
- Replication crisis (1)
- Research data management (1)
- Resistance (1)
- Resonance wavelength shift (1)
- Reusable (1)
- Reverse microemulsion (1)
- Reversible Hydrogen Storage (1)
- Reversible covalent hydrazine chemistry (RCHC) (1)
- Revision of the SI (1)
- Rheology (1)
- Rheumatoid arthritis (1)
- Rheumatoide Arthritis (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Ring fusion (1)
- Ring resonators (1)
- Ringversuche (1)
- Risikoanalyse (1)
- Risk Assessment (1)
- River water (1)
- River water sulfate (1)
- Robustness (1)
- Rosamine (1)
- Round robin exercise (1)
- Roxithromycin (1)
- Rreference material (1)
- Ruthenium(II) complexes (1)
- Rückverstromung (1)
- SA conjugates (1)
- SALSA (1)
- SARS-CoV-2 antibody (1)
- SARS-CoV-2 nucleocapsid protein (1)
- SBA-16 (1)
- SDHI-fungicide (1)
- SEC (1)
- SEM tilting (1)
- SERDS (1)
- SI Traceability (1)
- SI-traceable (1)
- SIDA-LC-MS/MS (1)
- SKPFM (1)
- SMASH (1)
- SOM-SM (1)
- SPIONS (1)
- SVOC (1)
- SWIR photoluminescence (1)
- Saccharide sensing (1)
- Safe by design (1)
- Safer by design (1)
- Salicylic acid (1)
- Salinität (1)
- Salinomycin (1)
- Salts (1)
- Sample preparation (1)
- Sample treatment (1)
- Sample-sample bracketing (1)
- Sampling (1)
- Sanger sequencing (1)
- Saure Hydrolyse (1)
- Scale anchor (1)
- Scale conversion (1)
- Scandium (1)
- Schallemission (1)
- Schallemissionsanalyse (SEA) (1)
- Schlangenbohne (1)
- Schlieren Imaging (1)
- Schwangerschaftstest (1)
- Science Communication (1)
- Scientific communication (1)
- Scientific method (1)
- Scientific publication (1)
- Scientific rigour (1)
- Scopolamine (1)
- Screen-printed electrode (1)
- Screen-printed electrodes (1)
- Screening method (1)
- Secondary alcohols (1)
- Security (1)
- Sediment and fish samples (1)
- Sedimente (1)
- Segregation (1)
- Selektivität (1)
- Selenium (1)
- Self-absorption (1)
- Self-absorption coefficient (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Semiconductur (1)
- SensRef (1)
- Sensing; temperature (1)
- Sensitizers (1)
- Sensor Materials (1)
- Sensor network (1)
- Sensor response (1)
- Sensory particles (1)
- Separation (1)
- Sequence dependence (1)
- Sequence-defined oligomer (1)
- Sequencing algorithm (1)
- Sequenzierung (1)
- Sewage sludge ash (1)
- Sewage treatment plant (1)
- Shiny-App (1)
- Short chained Phthalates (1)
- Short chained phthalates (1)
- Shortwave infrared (1)
- Si isotope fractionation (1)
- Si isotopes (1)
- Sicherer Umgang (1)
- Sicherheit (1)
- Silbernanopartikel (1)
- Silica Nanoparticles (1)
- Silica diagenesis (1)
- Silica nanoparticles (1)
- Silica particles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicon Photonics (1)
- Silicon chloride (1)
- Silicon chlorides (1)
- Silicon tetrafluoride (1)
- Silver artefacts (1)
- Silver cluster (1)
- Silver diffusion (1)
- Silver indium sulfide (1)
- Simultaneous determination (1)
- Single Particle (1)
- Single cell-ICP-MS (1)
- Single emitter (1)
- Single enhancement (1)
- Single particle-ICP-ToF-MS (1)
- Single-cell analysis (1)
- Single-dot spectroscopy (1)
- Single-particle (1)
- Single-particle measurements (1)
- Single-source-precursor (1)
- Singulettsauerstoff (1)
- Sintered Material (1)
- Sintered glass (1)
- Site-selective bioconjugation (1)
- Size and size distribution (1)
- Small angle x-ray scattering (1)
- Small-angle scattering (1)
- Smart Laboratoy (1)
- Smart actuators (1)
- Smart test laboratories (1)
- Smarte Laborgeräte (1)
- Smarter Aktor (1)
- Smartes Labor (1)
- Smartphone readout (1)
- Smartphone readout device (1)
- Smoldering fires (1)
- Society of hair testing (1)
- Soda-lime glass (1)
- Sodium chloride method (1)
- Soft protein corona (1)
- Soil available boron (1)
- Soil contact (1)
- Soil contamination (1)
- Soil heterogeneity (1)
- Soils (1)
- Sol-gel process (1)
- Solar cell (1)
- Solar cells (1)
- Solar concentrator (1)
- Solar energy (1)
- Solid (1)
- Solid microanalysis (1)
- Solid phase (1)
- Solid support (1)
- Solid-binding Peptides (1)
- Solid-phase extraction (1)
- Solid-phase extraction (SPE) (1)
- Solid-state fluorescence (1)
- Solubilizer (1)
- Solvation properties (1)
- Solvent polarity (1)
- Sonochemical synthesis (1)
- Sorghum (1)
- Sorption (1)
- Source Localization (1)
- Spark plasma sintering (1)
- Spatial Heterodyne Spectrometer (1)
- Spatial Heterodyne Spectrometry (1)
- Spatial Heterodyne Spectroscopy (1)
- Special issue, young analytical scientists (1)
- Species-specific Isotope Analysis (1)
- Species-specific Isotope ratios (1)
- Species-unspecific on-line isotope dilution (1)
- Specific probe (1)
- Spectaris (1)
- Spectoscopic imaging (1)
- Spectral enhancement (1)
- Spectral overlap (1)
- Spectrometer (1)
- Spectroscopic imaging (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Speed lecture (1)
- Speed-of-sound measurements (1)
- Speichel (1)
- Speiseöle (1)
- Spektroskopische Bildgebung (1)
- Speroid (1)
- Spheroid (1)
- Spike protein (1)
- Splitting (1)
- Spurenelemente (1)
- Sputtering (1)
- Square-wave voltammetry (1)
- Sr and Nd isotope analysis (1)
- Sr isotope analysis (1)
- SrF2 (1)
- SsNMR (1)
- Sspeed of sound (1)
- Stabilization (1)
- Stable isotopes (1)
- Stable-Isotope-Dilution-Analysis (1)
- Stakeholders (1)
- Standard addition (1)
- Standard atomic weight (1)
- Standardisation (1)
- Standardisierung (1)
- Standortvorteil (1)
- Start-up (1)
- Static Mixing (1)
- Static headspace (1)
- Stationäre Phase (1)
- Statistical analysis (1)
- Stepwise growth (1)
- Stimulated Raman Spectroscopy (1)
- Storage Technologies (1)
- Stranski–Krastanow growth (1)
- Strontium (1)
- Strontium isotope (1)
- Strontium isotope ratio (1)
- Structural Biology (1)
- Structural Health Monitoring (SHM) (1)
- Structure-property relationship (1)
- Struvite (1)
- Sub-4nm particles (1)
- Sub-doppler spectroscopy (1)
- Substance release (1)
- Sulfide sensing (1)
- Sulfur isotopes (1)
- Sulfur quantification (1)
- Sulfur species conversion (1)
- Sulfur-copper-sepration (1)
- Sulfur-matrix separation (1)
- Sulfuric acid (1)
- Sulphur isotope (1)
- Sum Parameter Method (1)
- Sum parameter method (1)
- Summenparameter Fluor (1)
- Summer School (1)
- Supercritical adsorption (1)
- Supernatant (1)
- Superplasticizer (1)
- Supplementary comparison (1)
- Support vector machines (1)
- Supported catalyst (1)
- Supramolecular Chemistry (1)
- Supramolecular chemistry (1)
- Surface Activation (1)
- Surface Chemistry (1)
- Surface Modification (1)
- Surface area control (1)
- Surface derivatization (1)
- Surface enhanced Raman scattering (1)
- Surface functional group quantification (1)
- Surface functional groups (1)
- Surface functions (1)
- Surface group (1)
- Surface ligand (1)
- Surface modification (1)
- Surface modified nano- and microparticles (1)
- Surface molecular patterning (1)
- Surface plasmon resonance (1)
- Surface waters (1)
- Surface-enhanced Raman scattering (1)
- Surface-enhanced Raman scattering (SERS) (1)
- Surface-enhanced Raman spectroscopy (SERS) (1)
- Surfaces (1)
- Surfacewaters (1)
- Surfactant (1)
- Surfactants (1)
- Surrogate citations (1)
- Suspect and non-target analysis (1)
- Suspended organic matter (1)
- Suspension Array (1)
- Suspension array (1)
- Sustainable Food Safety (1)
- Sustainable Production (1)
- Sustainable-by-Design (1)
- Suzuki coupling (1)
- Suzuki-Miyaura coupling (1)
- Swell-capture (1)
- Synchrotron FTIR (1)
- Synchrotron XPS (1)
- Synthetic air (1)
- Synthetic isotope mixtures (1)
- TATP (1)
- TDBP-TAZTO (1)
- TGA-FTIR (1)
- TLR4 activation (1)
- TMB (1)
- TMDCs (1)
- TTA-UC (1)
- Tandem-MS (1)
- Tantal (1)
- Tantalum oxyfluorides (1)
- Target (1)
- Tau (1)
- Tau protein (1)
- Teaching (1)
- Technologie-Roadmap "Prozess-Sensoren 4.0" (1)
- Technologie-Roadmap Prozess-Sensoren (1)
- Technology-critical elements (1)
- Telomere (1)
- Temperature sensing (1)
- Tenuazonic acid (1)
- Terbutryne (1)
- Terephthalic acid (1)
- Terminal functional groups (1)
- Terminology (1)
- Ternary quantum dot (1)
- Terrorism (1)
- Test Streifen (1)
- Test Strip analysis (1)
- Test gas generation (1)
- Tetracyclin (1)
- Theranostic (1)
- Theranostics (1)
- Therapeutic Antibodies (1)
- Therapeutic Drug Monitoring (1)
- Therapeutic antibodies (1)
- Therapy (1)
- Thermal Process Engineering (1)
- Thermal coupling energy level (1)
- Thermal decomposition (1)
- Thermal degradation (1)
- Thermal imaging (1)
- Thermal model (1)
- Thermally coupled levels (1)
- Thermische Verfahren (1)
- Thermo-desorption (1)
- Thermocouple (1)
- Thermodynamic analysis (1)
- Thermostating (1)
- Thick shells (1)
- Thickness (1)
- Thin films (1)
- Thin metal alloy layers (1)
- Thin tissue sections (1)
- Thiols (1)
- Tholins (1)
- Tilting (1)
- Time-gated Raman (TG-Raman) (1)
- Time-gated Raman-Spektroskpie (1)
- Time-gated emission (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-resolved (1)
- Time-resolved flow cytometry (1)
- Tissue soldering (1)
- Titan-Halterung (1)
- Titanium dioxide (1)
- Titanium Carbide Nanosheets (1)
- Titanium hydride (1)
- ToF-SIMS (1)
- Toll-like receptor 4 (1)
- Tomography (1)
- Topical collection: Analytical Methods and Applications in the Materials and Life Sciences (1)
- Total element content (1)
- Total element determination (1)
- Toxic elements (1)
- Toxin (1)
- Trace Elements (1)
- Trace detection (1)
- Transcriptomic (1)
- Transformation (1)
- Transformation Product (1)
- Transformation Products (1)
- Transformations products (1)
- Transient absorbtion spectroscopy (1)
- Transient signal (1)
- Transition metal (1)
- Transition metal dichalcogenide (1)
- Transpassive dissolution (1)
- Transport properties (1)
- Trennung (1)
- Trialkoxysilane (1)
- Triazine herbicide (1)
- Tribofilm (1)
- Tribologie (1)
- Trichodien (1)
- Trifluoressigsäure (1)
- Triggered (1)
- Trinitro (1)
- Trinitrotoluol (1)
- Trinkwasseranalytik (1)
- Trojan silver artefacts (1)
- Truffle Aroma (1)
- Truffles (1)
- Trust (1)
- Tryptic digest (1)
- Tryptophan (1)
- Tuber melanosporum (1)
- Tutzing Symposion (1)
- Tutzing-Symposion (1)
- Two-phase system (1)
- Type-I pyrethroids (1)
- UHPLC-MS/MS (1)
- UV Bestrahlung (1)
- UV Vis (1)
- UV irradiation (1)
- UV radiation (1)
- UV/vis spectroscopy (1)
- UV–Vis spectroscopy (1)
- UiO (1)
- Ultrasensitive (1)
- Ultrasonic Levitation (1)
- Ultrasonic acoustic resonator (1)
- Ultrasonic levitation (1)
- Ultrasound (1)
- Umwelt-Speziation (1)
- Umweltprobenbank (1)
- Uncertainty Evaluation (1)
- Underground gas storage (UGS) (1)
- Univariat (1)
- Unsicherheitsabschätzung (1)
- Upconverion (1)
- Upconversation nanocrystal (1)
- Upconverstion (1)
- Upscaling (1)
- Uptake estimation (1)
- Urin (1)
- Urine (1)
- Use-Case Wasserstofftankstelle (1)
- Uses (1)
- VAMAS (1)
- VO (1)
- VOC-Emission (1)
- VOC-emission (1)
- VPN (1)
- VVOC (1)
- Vacuum Ultraviolet (1)
- Vacuum ultraviolet (VUV) light (1)
- ValidNMR (1)
- Validate method (1)
- Validation trial (1)
- Value assignment (1)
- Vanadium (1)
- Vanadium oxide catalysts (1)
- Vanadiumcarbid (1)
- Vegetable edible oil (1)
- Velocimetry (1)
- Vernetzung (1)
- Verwaltungsschale (1)
- Veterinary drugs (1)
- Vhh (1)
- Vibrational Sum-Frequency Generation Spectroscopy (1)
- Vigna unguiculata (1)
- Visualization (1)
- Vocabulary providers (1)
- Volatile marker (1)
- Volatile organic compounds; (1)
- Volatiles (1)
- Volumetric properties (1)
- Volumetric uptake (1)
- WD-XRF (1)
- Wadden Sea (1)
- Wasserproben (1)
- Wasserstoff Referenzmaterial (1)
- Wasserstoff-Qualität (1)
- Wasserstoff-Wirtschaft (1)
- Wasserstoffanalytik (1)
- Wasserstofferzeugung (1)
- Wasserstoffspeicher (1)
- Wasserstoffstrategie (1)
- Wasserstofftankstelle (1)
- Wastewater treatment (1)
- Water contact (1)
- Waveguide (1)
- Weathering (1)
- Weighing Uncertainty (1)
- Wipe test (1)
- Wissenschaftskultur (1)
- Wolframcarbid (1)
- Wood chips (1)
- Work function (1)
- X-Ray analysis (1)
- X-Ray fluorescence (1)
- X-ray (1)
- X-ray Photoelectron Spectroscopy (1)
- X-ray diffraction (1)
- X-ray fluorescence (1)
- X-ray microspectroscopy (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectroscopy (1)
- XANES (1)
- XRCD method (1)
- Xerogel (1)
- Yb(III) (1)
- Yerba mate tea (1)
- Yield stress (1)
- Young´s Modulus (1)
- Ytterbium (1)
- ZVEI (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zebrafisch (1)
- Zellanalytik (1)
- Zellulose (1)
- Zenodo (1)
- Zeolithe (1)
- Zertifikat (1)
- Zertifizierung (1)
- Zinc ferrite (1)
- Zinc oxide (1)
- Zirconia (1)
- Zirconium (1)
- Zitrullin (1)
- Zn (1)
- Zr-Modifier (1)
- Zyklisierung (1)
- a-zearalenol (1)
- aggregation-induced dual emission (AIDE) (1)
- agricultural economy (1)
- amperometry (1)
- anion-exchange (1)
- antibodies (1)
- antibody (1)
- bacteria (1)
- bacteria detection (1)
- battery aging mechanism (1)
- bell pepper (1)
- bioimaging (1)
- biokompatibel (1)
- boron (1)
- calibration (1)
- carbon capture and storage (1)
- compost (1)
- current collector corrosion (1)
- cyclic voltammetry (1)
- delta value (1)
- depth profiles (1)
- discharge (1)
- dye (1)
- embedded sensor (1)
- emission (1)
- environment (1)
- equation of state (1)
- flow cytometry (1)
- fluorescence microscopy (1)
- fluorescence standards (1)
- gas analysis (1)
- gesintert (1)
- glow (1)
- imaging (1)
- immunoseparation (1)
- ion optics (1)
- isotope fractionation (1)
- lank characterization (1)
- lifetime (1)
- magnetic beads (1)
- magnetic nanocatalysts (1)
- magnetic nanoparticle (1)
- measurement uncertainty (1)
- membrane-based flow-through immunoassay (1)
- metabolism (1)
- method (1)
- microfluidics (1)
- nanoparticle (1)
- ochratoxin A (1)
- optical (1)
- organic dyes (1)
- p-Aminothiophenol (1)
- p-Nitrothiophenol (1)
- p-aminothiophenol (1)
- p-nitrothiophenol (1)
- pL-droplets (1)
- particle (1)
- ph (1)
- photoluminescence (1)
- photophysics (1)
- products (1)
- quality assurcance (1)
- quantum dot (1)
- quantum yield (1)
- reference materials, requirements, guidance (1)
- rekombinante Protein Expression (1)
- research landscape (1)
- sc-ICP-ToF-MS (1)
- screen-printed electrodes (1)
- screening tes (1)
- self-replication (1)
- silicon (1)
- single cell-ICP-ToF-MS (1)
- single particle-ICP-ToF-MS (1)
- single-sinker densimeter (1)
- smartphone (1)
- solid microanalysis (1)
- solvent-induced changes (1)
- spICP-MS (1)
- species-specific isotope information (1)
- surface group analysis (1)
- synthesis (1)
- tandard addition (1)
- temperature (1)
- thermophysical properties (1)
- transformation (1)
- transmission mode (1)
- validation, qualitative methods (1)
- waste (1)
- water (1)
- zertifizierte Referenzmaterialien (1)
- µJ-DPSS laser (1)
- Ägyptisch Blau (1)
- Ägyptisches Museum Berlin (1)
- Öl (1)
- β-Lactam (1)
- β-lactam (1)
- γ-H2AX assay (1)
Organisationseinheit der BAM
- 1 Analytische Chemie; Referenzmaterialien (1803) (entfernen)
Paper des Monats
- ja (22)
Trace elemental analysis in human serum is integral in both clinical and research settings. Analyzing the level of some specific elements like Se and Zn helps indicate the nutritional and health status. Furthermore, elucidating the roles of trace elements in various physiological and pathological conditions can shed light on disease mechanisms and potential treatments. Inductively coupled plasma mass spectrometry (ICP-MS) stands out as a preeminent method for trace elemental analysis, given its exceptional sensitivity and minimal sample requirements. However, ICP-MS has challenges, such as argon-related interferences that hinder the accurate quantification of elements like Ca, Fe, and Se. The naturally most abundant isotopes of Ca (40Ca), Fe (56Fe), and Se (80Se) are subject to isobaric interference from 40Ar+, 40Ar16O+, and 40Ar2+, thereby complicating their direct measurement and preventing isotope dilution analysis.
In response to these challenges, nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) emerges as a viable alternative to ICP-MS, eliminating argon consumption and associated interferences. This study employed MICAP-MS to quantify Ca, Fe, and Se in 11 certified reference human serums using matrix-matched calibration and isotope dilution with the isotopes 40Ca, 56Fe, and 80Se. The results obtained with both methods were validated against certified values, and the suitability of MICAP-MS for isotope dilution was evaluated. Additionally, the performance of MICAP-MS in the Na matrix was investigated and discussed alongside the impact of organic species.
Lithium-ion batteries are a key technology for tackling challenges in energy and climate crisis, but up to 30 % are discarded right after production. Quality is closely related to the homogeneity of the used materials and coatings. Fluorine compounds, both in the polymer and from degradation of the electrolyte, are of special interest for the formation and aging of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) emerged as a fast and convenient method for depth-profiling of battery materials. However, fluorine remains a spectroscopic challenge due to a high excitation energy and only few strong emission lines in the UV/Vis spectral range.
We investigated the partial substitution of argon with neon in the plasma gas. The main emission line at 685.603 nm was monitored by both photo multiplier tube (PMT) with Czerny-Turner monochromator at 20 µm slit-size, and charge-coupled device (CCD) with 1200 lines/mm grating. For calibration, we used a set of hot-pressed copper cylinders with varying calcium fluoride amount fraction, ranging from 1.6 % to 4.4 %. Plasma gas mixtures with a mole fraction of 5 %, 10 % and 20 % neon in argon were used. Sensitivity in comparison to pure argon was increased by factor 4, 7 and 14, respectively. In general, PMT detection was more sensitive than CCD. As expected, sputter rates decreased with higher neon content in the plasma gas. Depth-profiling of the cathodes was performed in pulsed mode at constant voltage and pressure, which resulted in stable plasma conditions. We achieve matrix-independent quantitative information on fluorine distribution by correction based on sputter rates.
This advancement in GD-OES provides a more accurate analytical approach for evaluating the homogeneity of lithium-ion battery materials, potentially leading to more sustainable and cost-effective manufacturing processes.
To address the challenges of the climate crisis, multiple solutions for sustainable energy sources and storage systems are needed. One such solution is lithium-ion batteries (LIBs). Currently, 5 to 30 % of LIBs are discarded immediately after manufacturing. The homogeneous distribution of all materials used in the coating of cathodes and anodes is critical for the quality of LIBs. Furthermore, during formation i.e., the first steps of the charge/discharge cycling, the solid-electrolyte interphase forms on the anode particles, which has a huge impact on the performance. The same happens to some extent on the cathode, forming the cathode-electrolyte interphase. Fluorinated polymers and electrolytes are used in the manufacturing of LIBs. The electrolyte in particular is prone to degradation during formation and aging of the batteries. The interface of the cathode material with the aluminum current collector is also a critical point where degraded fluorine components cause pitting corrosion and at the same time promote passivation of the metal foil. Monitoring the spatial distribution of fluorine on these surfaces and interfaces is essential for sustainable LIB production.
Science Café Adlershof is having its next edition in 2024 on February 20th '24! We will have one speaker next week: Alexander Winckelmann is a PhD student at Bundesanstalt für Materialforschung und -Prüfung and will give a talk about his stay abroad in Switzerland - there will be free chocolates! There will be enough time to ask questions or simply chat with the guests and participants.
A systematic series of industrial-relevant polystyrene-based anion exchange resins that are functionalized with hydro- or fluorocarbon chains are compared regarding their adsorption behavior toward perfluorocarboxylic acids (PFCA) in respect to their charge, chain length, and type of chain. The results clearly show the dominance of electrostatic interactions in the adsorption process as uncharged adsorber materials showed no adsorption at all. In contrast, the charged adsorber materials showed in general a PFCA removal of 80% to 30% over the experiment depending on effluent fraction.
Unexpectedly, for perfluorobutanoic acid (PFBA) the highest removal rate is found with consistently >90%. Despite observing significant benefits in the adsorption of PFCA for fluoroalkylated adsorbers in comparison to their non-fluorinated counterparts, this effect of fluoroalkylation is comparatively small and can not be clearly attributed to fluorophilic interactions between the fluoroalkyl chains. These findings help clarifying that the introduction of fluorocarbon moieties in adsorber materials is not necessary in order to remove fluorocarbon molecules from the environment.
We introduce a passive smart dust concept as a novel solution for environmental monitoring. Utilizing chemical reagents like colorimetric indicators and other chemosensors, these particles detect varying environmental conditions. We developed paper-based sensors that are both cost-effective and eco-friendly. In practical tests, these sensors, dispersed over a designated area, successfully identified hazardous substances by changing their color when exposed to acids or bases. This color change was remotely detectable using a drone-mounted color camera. The data thus obtained was processed through specialized software, accurately pinpointing areas of contamination. This method proves the efficacy and scalability of passive smart dust technology for real-time, environmentally sustainable remote sensing of hazardous materials
Use/distribution of cost-effective and biocompatible pieces of cellulose paper as passive optical chemosensors and readout by the camera system.
Modification of the paper surface using various chemically sensitive dyes (indicators) provides an optically detectable reaction and conclusions about the target substances and precise location.
Changes in Black Truffle (Tuber melanosporum) Aroma during Storage under Different Conditions
(2024)
The enticing aroma of truffles is a key factor for their culinary value. Although all truffle species tend to be pricy, the most intensely aromatic species are the most sought after. Research into the aroma of truffles encompasses various disciplines including chemistry, biology, and sensory science. This study focusses on the chemical composition of the aroma of black truffles (Tuber melanosporum) and the changes occurring under different storage conditions. For this, truffle samples were stored under different treatments, at different temperatures, and measured over a total storage time of 12 days. Measurements of the truffle aroma profiles were taken with SPME/GC–MS at regular intervals. To handle the ample data collected, a systematic approach utilizing multivariate data analysis techniques was taken. This approach led to a vast amount of data which we made publicly available for future exploration. Results reveal the complexity of aroma changes, with 695 compounds identified, highlighting the need for a comprehensive understanding. Principal component analyses offer initial insights into truffle composition, while individual compounds may serve as markers for age (formic acid, 1-methylpropyl ester), freshness (2-Methyl-1-propanal; 1-(methylthio)-propane), freezing (tetrahydrofuran), salt treatment (1-chloropentane), or heat exposure (4-hydroxy-3-methyl-2-butanone). This research suggests that heat treatment or salt contact significantly affects truffle aroma, while freezing and cutting have less pronounced effects in comparison. The enrichment of compounds showing significant changes during storage was investigated with a metabolomic pathway analysis. The involvement of some of the enriched compounds on the pyruvate/glycolysis and sulfur pathways was shown.
Amphiphilic nanogels (ANGs) are promising carriers for hydrophobic cargos such as drugs, dyes, and catalysts.
Loading content and release kinetics of these compounds are controlled by type and number of hydrophobic groups in the amphiphilic copolymer network. Thus, understanding the interactions between cargo and colloidal carrier is mandatory for a tailor-made and cargo-specific ANG design. To systematically explore the influence of the network composition on these interactions, we prepared a set of ANGs of different amphiphilicity and loaded these ANGs with varying concentrations of the solvatochromic dye Nile Red (NR). Here, NR acts as a hydrophobic model cargo to optically probe the polarity of its microenvironment. Analysis of the NR emission spectra as well as measurements of the fluorescence quantum yields and decay kinetics revealed a decrease in the polarity of the NR microenvironment with increasing hydrophobicity of the hydrophobic groups in the ANG network and dye–dye interactions at higher loading concentrations. At low NR concentrations, the hydrophobic cargo NR is encapsulated in the hydrophobic domains. Increasing NR concentrations resulted in probe molecules located in a more hydrophilic environment, i.e., at the nanodomain border, and favored dye–dye interactions and NR aggregation.
These results correlate well with release experiments, indicating first NR release from more hydrophilic network locations. Overall, our findings demonstrate the importance to understand carrier–drug interactions for efficient loading and controlled release profiles in amphiphilic nanogels.
On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak.
Scattering luminescent materials dispersed in liquid and solid matrices and luminescent powders are increasingly relevant for fundamental research and industry. Examples are luminescent nano- and microparticles and phosphors of different compositions in various matrices or incorporated into ceramics with applications in energy conversion, solid-state lighting, medical diagnostics, and security barcoding. The key parameter to characterize the performance of these materials is the photoluminescence/fluorescence quantum yield (Φf), i.e., the number of emitted photons per number of absorbed photons. To identify and quantify the sources of uncertainty of absolute measurements of Φf of scattering samples, the first interlaboratory comparison (ILC) of three laboratories from academia and industry was performed by following identical measurement protocols. Thereby, two types ofcommercial stand-alone integrating sphere setups with different illumination and detection geometries were utilized for measuring the Φf of transparent and scattering dye solutions and solid phosphors, namely, YAG:Ce optoceramics of varying surface roughness, used as converter materials for blue light emitting diodes. Special emphasis was dedicated to the influence of the measurement geometry, the optical properties of the blank utilized to determine the number of photons of the incident excitation light absorbed by the sample, and the sample-specific surface roughness. While the Φf values of the liquid samples matched between instruments, Φf measurements of the optoceramics with different blanks revealed substantial differences. The ILC results underline the importance of the measurement geometry, sample position, and blank for reliable Φf data of scattering the YAG:Ce optoceramics, with the blank’s optical properties accounting for uncertainties exceeding 20%.
The ability to controllably move gaseous ions is an essential aspect of ion-based spectrometry (e.g., mass spectrometry and ion mobility spectrometry) as well as materials processing. At higher pressures, ion motion is largely governed by diffusion and multiple collisions with neutral gas molecules. Thus, high-pressure ion optics based on electrostatics require large fields, radio frequency drives, complicated geometries, and/or partially transmissive grids that become contaminated. Here, we demonstrate that low-power standing acoustic waves can be used to guide, block, focus, and separate beams of ions akin to electrostatic ion optics. Ions preferentially travel through the static-pressure regions (“nodes”) while neutral gas does not appear to be impacted by the acoustic field structure and continues along a straight trajectory. This acoustic ion manipulation (AIM) approach has broad implications for ion manipulation techniques at high pressure, while expanding our fundamental understanding of the behavior of ions in gases.
Ergot alkaloids (EAs) formed by Claviceps fungi are one of the most common food contaminants worldwide, affecting cereals such as rye, wheat, and barley. To accurately determine the level of contamination and to monitor EAs maximum levels set by the European Union, the six most common EAs (so-called priority EAs) and their corresponding epimers are quantified using high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). The quantification of EAs in complex food matrices without appropriate internal tandards is challenging but currently carried out in the standard method EN 7425:2021 due to their commercial unavailability. To address the need for isotopically labeled EAs, we focus on two semi-synthetic approaches for the synthesis of these reference standards. Therefore, we investigate the feasibility of the N6-demethylation of native ergotamine to yield norergotamine, which can subsequently be remethylated with an isotopically labeled methylating reagent, such as iodomethane (13CD3-I), to yield isotopically labeled ergotamine and its C8-epimer ergotaminine. Testing the isotopically labeled ergotamine/-inine against native ergotamine/-inine with HPLC coupled to high-resolution HR-MS/MS proved the structure of ergotamine-13CD3 and ergotaminine-13CD3. Thus, for the first time, we can describe their synthesis from unlabeled, native ergotamine. Furthermore, this approach is promising as a universal way to synthesize other isotopically labeled EAs.
Soil certified reference material (CRM), UME EnvCRM 03 was produced by a collaborative approach among national metrology institutes, designated institutes and university research laboratories within the scope of the EMPIR project: Matrix Reference Materials for Environmental Analysis. This paper presents the sampling and processing methodology, homogeneity, stability, characterization campaign, the assignment of property values and their associated uncertainties in compliance with ISO 17034:2016. The material processing methodology involves blending a natural soil sample with a contaminated soil sample obtained by spiking elemental solutions for 8 elements (Cd, Co, Cu, Hg, Ni, Pb, Sb and Zn) to reach the level of warning risk monitoring values specified for metals and metalloids of soils in Europe. Comparative homogeneity and stability test data were obtained by two different institutes, ensuring the reliability and back up of the data. The certified values and associated expanded uncertainties for the total mass fractions of thirteen elements (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, V and Zn) are established. The developed CRM can be used for the development and validation of measurement procedures for the determination of the total mass fractions of elements in soil and also for quality control/assurance purposes. The developed CRM is the first example of a soil material originating from Türkiye.
In this work, the electrochemical behavior of 4-phenylurazole (Ph-Ur) was studied and the latter was used as a molecular anchor for the electrochemical bioconjugation of tyrosine (Y). Cyclic voltammetry (CV) and controlled potential coulometry (CPC) allowed the in-situ generation of the PTAD (4-phenyl-3 H-1,2,4-triazole-3,5(4 H)-dione) species from phenylurazole on demand for tyrosine electrolabeling. The chemoselectivity of the reaction was studied with another amino acid (lysine, Lys) and no changes in Lys were observed. To evaluate the performance of tyrosine electrolabeling, coulometric analyses at controlled potentials were performed on solutions of phenylurazole and the phenylurazole-tyrosine mixture in different proportions (2:1, 1:1, and 1:2). The electrolysis of the phenylurazole-tyrosine mixture in the ratio (1:2) produced a charge of 2.07 C, very close to the theoretical value (1.93 C), with high reaction kinetics, a result obtained here for the first time. The products obtained were identified and characterized by liquid chromatography coupled to high-resolution electrospray ionization mass spectrometry (LC-HRMS and LC- HRMS2). Two products were formed from the click reactions, one of which was the majority. Another part of this work was to study the electrochemical degradation of the molecular anchor 4-phenylazole (Ph-Ur). Four stable degradation products of phenylurazole were identified (C7H9N2O, C6H8N, C6H8NO, C14H13N4O2) based on chromatographic profiles and mass spectrometry results. The charge generated during the electrolysis of phenylurazole (two-electron process) (2.85 C) is inconsistent with the theoretical or calculated charge (1.93 C), indicating that secondary/parasitic reactions occurred during the electrolysis of the latter. In conclusion, the electrochemically promoted click phenylurazole-tyrosine reactions give rise to click products with high reaction kinetics and yields in the (1:2) phenylurazole-tyrosine ratios, and the presence of side reactions is likely to affect the yield of the click phenylurazole-tyrosine reaction.
Volatile organic compounds (VOCs) emitted by furniture and building materials can cause health issues. For an improvement of indoor air quality low emitting materials should be used. Quality assurance and –control (QA/QC) measures require an emission reference material (ERM) with a predictable emission rate of VOCs. The idea is to use porous materials as ERM, which store the VOCs inside their pores and emit them constantly.
Volatile organic compounds (VOCs) emitted by furniture and
building materials can cause health issues. For an
improvement of indoor air quality low emitting materials
should be used. Quality assurance and –control (QA/QC)
measures require an emission reference material (ERM) with a
predictable emission rate of VOCs. The idea is to use porous
materials as ERM, which store the VOCs inside their pores and
emit them constantly.
Isotope analysis plays a critical role in various disciplines, including environmental science, archaeology, and forensic investigations. Traditional methods such as mass spectrometry provide precise isotopic data but often require complex, costly setups and extensive sample preparation. As an alternative, optical spectrometry has emerged as a versatile and less invasive technique. This presentation explores the advancements and applications of optical spectrometry methods in isotope analysis, emphasizing their benefits and challenges.
Lithium (Li), Boron (B), Nitrogen (N), Magnesium (Mg), and Calcium (Ca) are pivotal elements across various spheres such as the hydrosphere, biosphere, and lithosphere, significantly impacting (bio-) geochemical and physiological processes. These elements exhibit stable isotopes with substantial roles in geological, environmental, and biological studies. The traditional method for measuring isotope amount ratios has been through mass spectrometry, which, despite its accuracy, comes with high operational costs, the need for skilled operators, and time-consuming sample preparation processes.
Combining optical spectroscopy with chemometrics introduces an innovative, cost-effective approach by the hand of high-resolution continuum source atomic and molecular absorption spectrometry (HR-CS-AAS and HR-CS-MAS) for the analysis of isotope ratios in Li, B, N, Mg, and Ca. By analyzing the atomic or molecular absorption spectrum of the in-situ generated cloud of atoms of diatomic molecules (e.g., Li, BH, NO, MgF, CaF) during the electronic transition from the fundamental state, this method allows for the rapid determination of isotope ratios directly from sample solutions without the need for complex sample preparation.
For each element, the respective atomic or molecule's absorption spectrum was deconvoluted into its isotopic components using partial least squares regression or machine learning algorithms. Robust calibration models were developed, calibrated with enriched isotope, and validated against certified reference materials. Spectral data underwent preprocessing to optimize the modeling to determine the optimal number of latent variables.
The findings showcase that this optical spectrometric method yields results that agree with those obtained via inductively coupled plasma mass spectrometry (ICP-MS), offering a promising, cost-effective, and rapid alternative for isotope analysis with precisions as low as ± 0.2‰. This approach is a significant advancement in analytical chemistry, providing a new way to study isotope variations in biological, environmental, and geological samples.
What does GD-OES reveal about the aging and manufacturing processes of lithium-ion batteries?
(2024)
Glow-Discharge Optical Emission Spectroscopy (GD-OES), a powerful analytical technique, sheds light on the two critical aspects of lithium-ion batteries (LIBs): manufacturing and aging 1, 2. We optimized cell production in manufacturing by adjusting parameters, including cathode doping, electrolyte concentration, and pressing force. GD-OES provided in-depth elemental composition and homogeneity analysis, which is crucial for identifying optimal manufacturing conditions. These findings were validated by electrochemical impedance spectroscopy, confirming the quality of the manufactured batteries.
Shifting the focus to aging, we use GD-OES for fluorine depth profiling, a key element in understanding polymer and electrolyte degradation. However, fluorine presents analytical challenges. We addressed this by substituting argon with a neon:argon mixture, which significantly enhanced fluorine detection sensitivity. This advancement not only improves accuracy but also holds the potential to guide sustainable and cost-efficient manufacturing strategies.
Through its versatility, GD-OES has proven to be a powerful tool for not only optimizing LIB manufacturing processes but also gaining deeper insights into their aging mechanisms. This research extends beyond academic interest, offering tangible benefits for the industry by translating into improved battery quality, extended lifespan, and overall performance.
Im Rahmen der von der BAM und anderen Partnern ins Leben gerufenen Initiative „Digitale Qualitätsinfrastruktur“ liegt der Fokus u.a. auf der Entwicklung von neuen Zertifizierungsworkflows. Dabei ist eine besondere Bedeutung dem Zusammenführen von Operational Technology (OT) und Informationstechnik (IT) beizumessen. Zur Datenintegration aus der Sensor-Feldebene einer Versuchs-wasserstofftankstelle wurde eine solche Infrastruktur zunächst in einer Laborumgebung aufgebaut.
Homochirality is an obvious feature of life on Earth. On the other hand, extraterrestrial samples contain largely racemic compounds. The same is true for any common organic synthesis. Therefore, it has been a perplexing puzzle for decades how these racemates could have formed enantiomerically enriched fractions as a basis for the origin of homochiral life forms. Numerous hypotheses have been put forward as to how preferentially homochiral molecules could have formed and accumulated on Earth. In this article, it is shown that homochirality of the abiotic organic pool at the time of formation of the first self-replicating molecules is not necessary and not even probable. It is proposed to abandon the notion of a molecular ensemble and to focus on the level of individual molecules. Although the formation of the first self-replicating, most likely homochiral molecule is a seemingly improbable event, on a closer look, it is almost inevitable that homochiral molecules have formed simply on a statistical basis. In this case, the non-selective leap to homochirality would be one of the first steps in chemical evolution directly out of a racemic “ocean”. Moreover, most studies focus on the chirality of the primordial monomers with respect to an asymmetric carbon atom. However, any polymer with a minimal size that allows folding to a secondary structure, would spontaneously lead to asymmetric higher structures (conformations). Most of the functions of these polymers would be influenced by this inherently asymmetric folding. To summarize, simple and universal mechanisms may have led to homochiral self-replicating systems in the context of chemical evolution. A homochiral monomer pool is deemed unnecessary and probably never existed on primordial Earth.
Organotin compounds (OTCs) have been widely used in anti-fouling paints, pesticide formulations, and as stabilizers in polyvinyl chloride over the past century. In marine ecosystems, OTCs can cause severe damage to biodiversity, leading up to the extinction of vulnerable species. Due to the extensive use of tributyltin (TBT) as a biocide on ship hulls, it has been considered one of the most hazardous substances intentionally introduced into the aquatic environment. This resulted in a global ban on TBT-containing products in the 2000s. However, recent studies indicate the emerging presence of organotin pollutants.
OTCs are known to persist and accumulate in marine sediments, posing a long-term threat to the environment. These harmful substances can be set free and dispersed even after several decades. Therefore, analyzing sediment probes is imperative for a thorough monitoring of pollution. However, species-specific analysis of OTCs at required concentration levels in complex environmental matrices remains challenging. Chromatographic systems are commonly used for their analysis, but the required sample preparation is time-consuming and prone to contamination and analyte loss. The coupling of electrothermal vaporization and inductively coupled plasma-mass spectrometry (ETV/ICP-MS) demonstrates high potential as a rapid, convenient, and chemical-saving scanning tool for environmental samples.
This method enables the direct on-line fractionation of organic compounds from an inorganic fraction and provides element-specific detection at ultra-trace levels without complex sample preparation. Since OTCs are generally more toxic than ionic or elemental tin, analyzing them as a sum parameter is advantageous. Additionally, the determination of both organic and inorganic tin, rather than just organic tin, reveals valuable information about the fate of OTCs. The main challenge in obtaining accurate quantitative data using direct solid sampling techniques like as ETV/ICP-MS is applying a suitable calibration strategy. Our isotope dilution approach overcomes matrix effects in ETV/ICP-MS analysis and is compatible with commercial systems.
PFAS (Per- and polyfluoroalkyl substances) are a widespread and emerging environmental problem due to their longevity and ubiquitous spread. The common structural motif of this compound class is the fluorine – carbon bond on an alkyl backbone, which are known for their chemical inertness and combination of hydrophobicity and oleophobicity. The downside of those properties is the general lack of usable molecular interactions for adsorption to extract them from the environment. The notable exception to that inertness are fluorine – fluorine interactions, which are stronger, the longer the perfluorinated chain length is. Therefore, in this project we investigated the effect of fluorination, length and presence of a charge on the alkyl chain on an adsorber. Towards that goal, in total 16 different adsorber materials were synthesized (fluorinated/non-fluorinated; C4/ C6/ C8/ C10 ; positive charge/no charge) and tested in regard to their potential to adsorb PFOA and perfluoralkylic acids of differing chain lengths. The PFAS concentration was tested via LC-MS/MS to determine the adsorption rate on the various materials. Further work includes the transition from a target analytics to sum parameter analysis for future evaluation of adsorber materials in PFAS environmental samples like river samples. Therefore a quarterly sampling and extraction of spree surface water samples was planned.
Per- and polyfluoroalkyl substances (PFAS) have received global public attention because of their wide distribution in aquatic environments and potential adverse effects to humans and wildlife. Due to the lack of analytical standards and the enormous numbers of these compounds, current target-based methods (e.g., LC-MS/MS) are not suitable for the analysis of new/unknown PFAS and transformation products. Therefore, PFAS sum parameter analysis is becoming increasingly important. For PFAS determination of surface waters, solid phase extraction (SPE) is commonly implemented for clean-up and pre-concentration of samples.
Thus, within this work, single-layer SPE methods (based on Strata™-X, Strata™-X-AW, Strata™-NH2 and Oasis-HLB) were investigated for maximum PFAS coverage utilizing extractable organically bound fluorine (EOF) analysis. Thereby, the optimization procedure relied on the analysis of 3 surface water samples in Berlin, Germany, which were affected by the effluent discharge of wastewater treatment plants. To analyse the SPE elution profiles for EOF and inorganic fluorine, high resolution-continuum source-graphite furnace molecular absorption spectroscopy (HR-CS-GFMAS) and ion chromatography (IC) were used, respectively.
Highest EOF concentrations were achieved by using Strata-X/Strata-XAW as SPE sorbents and methanol as eluent. Furthermore, combinations of the most promising SPE sorbents were selected (X/XAW, XAW/X, HLB/X and WAX/GCB) to extract a wider range of PFASs. By comparing multi-layer SPE methods, lower EOF concentrations were obtained for all investigated combination phases compared to the analysed single phases. For the commercially available combination phase Strata-PFAS (WAX/GCB) for all three river water samples, lower EOF concentrations (1.5 times lower) were determined compared to Strata-X.
The results have shown that single-layer SPE systems are currently superior compared to combination phases for PFAS sum parameter analysis. The multi-layer SPE methods need further optimization regarding appropriate sorbent combinations, loading volumes and elution conditions. The developed single-layer SPE methods can help to elucidate pollutions hotspots and discharge routes.
Optical biosensors often show remarkable performance and can be configured in many ways for sensitive, selective, and rapid measurements. However, the high-quality and advanced optical assemblies required to read out the sensor signals, for example, Total Internal Reflection Fluorescence (TIRF) or Supercritical Angle Fluorescence (SAF) microscopy, which necessitate complex and expensive optical elements. Particularly in optical method development, researchers or developers are often confronted with limitations because conventional manufacturing processes for optical elements can be restrictive in terms of design, material, time, and cost. Modern and high-resolution 3D printing techniques make it possible to overcome these challenges and enable the fabrication of individualized and personalized free-form optical components, which can reduce costs and significantly shorten the prototyping timeline—from months to hours. In this work, we use a modern, high-resolution (< 22 µm) commercial Liquid Crystal Display (LCD)-based 3D printer, for which we spectroscopically and physically characterized commercial photo-resins printable with the LCD technique in the first step (Figure 1). The aim was not only to produce a printed element with a high surface quality that mitigates the inner filter effects caused by attenuation (high optical density (OD) due to reflection and scattering), but also to select a material with a high refractive index (RI>1.5) and high transmission values (>90% transmittance) in the visible to near-infrared spectral range (approx. 450 – 900 nm) that exhibits little or no autofluorescence. Using a selection of suitable resins, lenses and free-form optical elements were manufactured for comparison with standard glass or plastic counterparts.
Faecal contaminants in water are considered serious threats for human health, due to the presence of viruses, bacteria and other harmful microorganisms.1 Urobilin (UB) is a well-known faecal pigment and can be used as a marker for faecal matter in water.2 UB is commonly present in the urine of all mammals as the catabolic end product of bilirubin degradation.2 As the only simple chemical approach to its detection, Schlesinger’s test is usually used to enhance the weak fluorescence of UB in alcoholic media by complexation with Zinc.2, 3 The major limitation of this method is the only weak enhancement of the intrinsically weak UB fluorescence in aqueous media.3 This work presents an approach to introduce different Zn salts for improved fluorescence response, where we found a clear dependence of the fluorescence yield of UB-Zn(II) complexes on the counterion of the salt in water. By employing a combination of fluorescence parameters like transition energy, fluorescence intensity, and fluorescence lifetime, a photophysical understanding of the structure and conformation of the UB-Zn(II) complexes responsible for the fluorescence enhancement in water could be gained. The possibilities of developing a sensitive analytical method based on the acquired understanding are also discussed.
Therapeutic monoclonal antibodies are the fastest-growing group of biological agents which generated a yearly turnover of USD 210 billion in 2022 and whose sales are expected to grow by 10% annually over the next 10 years. With steadily increasing market importance, analytical methods for reliable quantification of therapeutic antibodies also become more and more relevant. Liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS) has become the main technology for antibody quantification. This approach, however, requires enzymatic digestion of the intact protein into peptides, for which a wide range of different protocols exists that often lead to different results depending on the digestion procedure or trypsin variants used. In particular, the amount and type of detergents added for protein unfolding prior to digestion is known to create significant bias in measurement results. The overall goal of the presented project is the application of novel thermostable and surface-functionalized trypsin particles for improved antibody digestion. Specifically, a trypsin-variant described in the literature exhibiting increased activity and thermal stability above 80°C, will be examined. The application of this enzyme should allow to perform digestion at elevated temperatures where the protein is naturally unfolding thereby increasing enzyme accessibility without the need for detergents. Furthermore, we will immobilize the thermostable trypsin onto the surface to further enhance enzyme stability, prevent self-digestion, and enable separation of trypsin from target peptides before LC–MS/MS analysis. As an immobilization platform, cheap and non-porous corundum particles will be used as these show high chemical stability and low levels of interaction of matrix proteins with the functionalized surface. adsorption. In a multidisciplinary collaboration with the SALSA Photonics Lab, we will investigate the characteristics of covalent enzyme binding and unspecific peptide binding using an interface-sensitive analytical tool, vibrational sum-frequency generation (VSFG) spectroscopy. The insights gained will not only lead to new competencies in peptide and enzyme surface analysis using VSFG spectroscopy in SALSA but will also significantly contribute to optimizing antibody quantification.
In this study, we demonstrate the applicability of nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) for Ca, Fe, and Se quantification in human serum using isotope dilution (ID) analysis. The matrix tolerance of MICAP-MS in Na matrix was investigated, uncovering that high Na levels can suppress the signal intensity. This suppression is likely due to the plasma loading and the space charge effect. Moreover, 40Ca and 44Ca isotopic fractionation was noted at elevated Na concentration. Nine certified serum samples were analyzed using both external calibration and ID analysis. Overestimation of Cr, Zn, As, and Se was found in the results of external calibration, which might be resulted from C-induced polyatomic interference and signal enhancement, respectively. Further investigations performed with methanol showed a similar enhancement effect for Zn, As, and Se, potentially supporting this assumption. The mass concentrations determined with ID analysis show metrological compatibility with the reference values, indicating that MICAP-MS combined with ID analysis can be a promising method for precise Ca, Fe, and Se determination. Moreover, this combination reduces the influences of matrix effects, broadening the applicability of MICAP-MS for samples with complex matrix.
Antikörper sind in der medizinischen Welt nicht mehr wegzudenken. Ihr Einsatz-Repertoire als Therapeutika für die Behandlung diverser Krankheiten und Infektionen weitet sich von Jahr zu Jahr mehr aus. Dabei basiert ein Großteil der verwendeten Antikörper zu diesem Zeitpunkt auf monoklonalen Antikörpern auf Basis von Hybridomazellen. Doch hier könnten rekombinante Antikörper aufgrund ihrer Vektor-basierten Expression eine vielversprechende und womöglich sogar revolutionierende Alternative bieten. So ergeben sich neue Optimierungsoptionen für Merkmale wie Affinität, Stabilität und Kompatibilität über Anpassungen auf genetischer oder posttranslationaler Ebene. Allerdings ergibt sich kein Anwendungszweck ohne die vorhergehende detaillierte Charakterisierung der Antikörper. Denn nur mit spezifischem Wissen über die diversen Eigenschaften und Wechselwirkungen kann eine effektive und präzise Verwendung in der Diagnostik und Therapeutik gewährleistet werden und auf diese Weise Leben retten.
Aus diesem Grund beschäftigt sich diese Masterarbeit mit der Vertiefung der rekombinanten Antikörper-Thematik. Dazu soll ein Anti-Tetanus-Antikörper erstmals rekombinant in verschiedenen Zelllinien hergestellt und anschließend über umfangreiche analytische Verfahren mit einem Fokus auf die Einflussanalyse der unterschiedlichen posttranslationalen Glykosylierungen charakterisiert werden. Zu diesem Zweck wurden als Grundlage einerseits zwei P1316-Dual-Expressions-Vektoren mit variierenden Insert-Positionen der schweren und leichten Kette durch Gibson-Assembly sowie individuellen pRK5-Plasmide für eine separiert Expression der Antikkörperketten mithilfe Restriktionsfragment-Ligation generiert. In einer Gegenüberstellung der der Expressionsausbeuten stellte sich die Überlegenheit der P1316-Plasmid-Konfiguration heraus, in der das Leichtketten-Insert an der ersten Expressionsstelle positioniert ist. Deshalb wurde dieser Vektor als Ausgangspunkt für die anschließende hochskalierten Herstellung des Anti-Tetanus-Antikörpers in Expi293F-GnTI- und ExpiCHO-S-Zellen verwendet. Ein ELISA bestätigte die Bindungsaktivität der rekombinanten Antikörper am Tetanus-Toxoid unabhängig vom Expressionssystem. Nach einer folgenden Optimierung der für die Aufreinigung verwendeten Protein-A-Affinitätschromatographie, wurde über weitere Charakterisierungsmethoden wie Größenausschlusschromatographie und dynamische Lichtstreuung eine vergleichbare Aggregation aufgrund der sauren Elution aufgezeigt. In diesem Kontext wurde die Notwendigkeit einer Zweistufen-Präparation mit Affinitäts- und Größenausschlusschromatografie für den Erhalt monodisperser Proben verdeutlicht. Zudem wurden die verschiedenen intakten Massen mitsamt ihrer spezifischen Glykan-abhängigen Streumaßen in Relation zum monoklonalen NISTmAB-Referenzantikörper bestimmt. Dabei konnte den Erwartungen nach sowohl die geringere Masse als auch die uniformere Glykosylierung der in Expi293 GnTI- exprimierten Immunoglobuline in Relation zum ExpiCHO-S-Antikörper nachgewiesen werden. Anschließend wurde das Stabilitätsverhalten mittels thermischer Entfaltung und dynamischer Lichtstreuung über einen ausgeweiteten Zeitraum sowie verschiedenen Temperaturen dokumentiert. Grundlegend wurde eine höhere thermische Stabilität der zweiten konstanten Schwerketten-Domäne des aus ExpiCHO-S-Zellen stammenden Antikörpers nachgewiesen. Außerdem konnte eine problemlose Lagerungsfähigkeit beider unterschiedlich glykosylierter Antikörper bei Raumtemperatur für mindestens 4 Wochen festgestellt werden. Des Weiteren wurde die Langzeitlagerung im Rahmen der Auswirkung von Gefrier-Auftau-Zyklen mit gleichbleibenden Methoden sowie zusätzlicher Größenausschlusschromatographie erprobt. Hierbei stellte sich der Erhalt der strukturellen Integrität nach bis zu 15 Zyklen heraus. Allerdings geht die Monodispersität bereits nach wenigen Zyklen verloren, wobei die geringfügiger glykosylierten Expi293F-GnTI-Anti-Tetanus-Antikörper eine stärkere Beeinträchtigung durch multiple Gefrier-Auftau-Zyklen aufwiesen.
This contribution reports the development of a polymerizable BODIPY-type fluorescent probe targeting small-molecule carboxylates for incorporation into molecularly imprinted polymers (MIPs). The design of the probe crosslinker includes a urea recognition site p-conjugated to the 3-position of the BODIPY core and two methacrylate moieties. Titration experiments with a carboxylate-expressing antibiotic, levofloxacin (LEVO), showed a blue shift of the absorption band as well as a broadening and decrease in emission, attributed to hydrogen bonding between the probe’s urea group and the carboxylate group of the antibiotic. Using this probe crosslinker, core–shell particles with a silica core and a thin MIP shell were prepared for the detection of LEVO. The MIP exhibited highly selective recognition of LEVO, with an imprinting factor of 18.1 compared to the non-imprinted polymer. Transmission electron microscopy confirmed the core–shell structure and spectroscopic studies revealed that the receptor’s positioning leads to a unique perturbation of the polymethinic character of the BODIPY chromophore, entailing the favourable responses. These features are fully preserved in the MIP, whereas no such response was observed for competitors such as ampicillin. The sensory particles allowed to detect LEVO down to submicromolar concentrations in dioxane. We have developed here for the first time a BODIPY probe for organic carboxylates and incorporated it into polymers using the imprinting technique, paving the way for BODIPY-type fluorescent MIP sensors.
qNMR - The handbook
(2023)
Quantitative NMR (qNMR) has been around for a long time, but also has great potential to solve future problems in any quantitative analysis. As a primary method, it differs fundamentally from chromatographic methods: it is better described as a quantum mechanical balance. Succesful implementation of qNMR requires certain attention to detail. "qNMR - the handbook" is intended to be a guide for analysts to help understand the fundamental principles of NMR and the significant points relating to its implementation for quantitation. Regulatory considerations of qNMR adoption are explained. NMR fundamentals are explained to provide understanding. Together with many useful examples, the book is a compelling addition to the laboratory's reference library, providing all the tools that any practitioner should know to successfully implement qNMR.
The authors are qNMR pioneers and come from a variety of backgrounds including business, government and academia.
Homochirality is an obvious feature of life on Earth. On the other hand, extraterrestrial samples contain largely racemic compounds. The same is true for any common organic synthesis. Therefore, it has been a perplexing puzzle for decades how these racemates could have formed enantiomerically enriched fractions as a basis for the origin of homochiral life forms. Numerous hypotheses have been put forward as to how preferentially homochiral molecules could have formed and accumulated on Earth. In this article, it is shown that homochirality of the abiotic organic pool at the time of formation of the first self-replicating molecules is not necessary and not even probable. It is proposed to abandon the notion of a molecular ensemble and to focus on the level of individual molecules. Although the formation of the first self-replicating, most likely homochiral molecule, is a seemingly improbable event, on a closer look, it is almost inevitable that some homochiral molecules have formed simply on a statistical basis. In this case, the non-selective leap to homochirality would be one of the first steps in chemical evolution directly out of a racemic “ocean”. Moreover, most studies focus on the chirality of the primordial monomers with respect to an asymmetric carbon atom. However, any polymer with a minimal size that allows folding to a secondary structure would spontaneously lead to asymmetric higher structures (conformations). Most of the functions of these polymers would be influenced by this inherently asymmetric folding. Furthermore, a concept of physical compartmentalization based on rock nanopores in analogy to nanocavities of digital immunoassays is introduced to suggest that complex cell walls or membranes were also not required for the first steps of chemical evolution. To summarize, simple and universal mechanisms may have led to homochiral self-replicating systems in the context of chemical evolution. A homochiral monomer pool is deemed unnecessary and probably never existed on primordial Earth.
In situ chemical analysis of duplex stainless steel weld by laser induced breakdown spectroscopy
(2024)
The high corrosion resistance and good mechanical properties of duplex stainless steel (DSS) are due to its special chemical composition, which is a balanced phase ratio of ferrite (α) and austenite (γ). Many industrial applications require the integration of DSS components. For this, Gas tungsten arc welding (GTAW) is an excellent choice, as it allows an automated operation with high reproducibility. However, when the weld pool solidifies, critical ratios of α- and γ- phases can occur, which lead to solidification cracking, increased susceptibility to corrosion, and a decrease in ductility and critical strength. Previous studies have shown that these defects can be caused by the accumulation of manganese and chromium in the heat affected zone (HAZ), requiring ongoing monitoring of this accumulation. A suitable method for such monitoring is laser-induced breakdown spectroscopy (LIBS), which can be used in two operating modes: calibration using standard reference samples and calibration-free. Unlike conventional quantitative LIBS measurements, which require reference samples to generate a calibration curve, calibration-free LIBS (CF-LIBS) allows chemical compositions to be determined solely from the emission spectrum of the plasma. Numerous publications show that CF-LIBS is a fast and efficient analytical method for the quantitative analysis of metal samples. In this work, CF-LIBS is applied to spectra obtained during GTAW DSS welding and the result is compared with those obtained by PLS analysis. A good correlation was found between both types of analysis, demonstrating the suitability of the CF-LIBS method for this application. The CF-LIBS method has a significant advantage over conventional LIBS due to the rapid in situ measurement of concentrations of major alloying elements without calibration procedure. This, combined with fast feedback and appropriate adjustment of welding parameters, helps prevent welding defects.
Heterogeneous sandwich immunoassays are widely used for biomarker detection in bioanalysis and medical diagnostics. The high analyte sensitivity of the current “gold standard” enzyme-linked immunosorbent assay (ELISA) originates from the signal-generating enzymatic amplification step, yielding a high number of optically detectable reporter molecules. For future point-of-care testing (POCT) and point-of-need applications, there is an increasing interest in more simple detection strategies that circumvent time-consuming and temperature-dependent enzymatic reactions. A common concept to aim for detection limits comparable to those of enzymatic amplification reactions is the usage of polymer nanoparticles (NP) stained with a large number of chromophores. We explored different simple NP-based signal amplification strategies for heterogeneous sandwich immunoassays
that rely on an extraction-triggered release step of different types of optically detectable reporters. Therefore, streptavidinfunctionalized polystyrene particles (PSP) are utilized as carriers for (i) the fluorescent dye coumarin 153 (C153) and (ii) hemin (hem) molecules catalyzing the luminol reaction enabling chemiluminescence (CL) detection. Additionally, (iii) NP labeling with hemin-based microperoxidase MP11 was assessed. For each amplification approach, the PSP was first systematically optimized regarding size, loading concentration, and surface chemistry. Then, for an immunoassay for the inflammation marker C- eactive protein (CRP), the analyte sensitivity achievable with optimized PSP
ystems was compared with the established ELISA concept for photometric and CL detection. Careful optimization led to a limit of detection (LOD) of 0.1 ng/mL for MP11-labeled PSP and CL detection, performing similarly well to a photometric ELISA (0.13 ng/mL), which demonstrates the huge potential of our novel assay concept.
The 2023 Nobel Prize in Chemistry was awarded to Aleksey I. Ekimov (prize share 1/3), Louis E. Brus (prize share 1/3), and Moungi G. Bawendi (prize share 1/3) for groundbreaking inventions in the field of nanotechnology, i.e., for the discovery and synthesis of semiconductor nanocrystals, also termed quantum dots, that exhibit size-dependent physicochemical properties enabled by quantum size effects. This feature article summarizes the main milestones of the discoveries and developments of quantum dots that paved the road to their versatile applications in solid-state lighting, display technology, energy conversion, medical diagnostics, bioimaging, and image-guided surgery.
SWIR luminescent nanomaterials – key chemical parameters for bright probes for in vivo bioimaging
(2024)
A current challenge for studying physio-pathological phenomena and diseaserelated processes in living organisms with non-invasive optical bioimaging is the development of bright optical reporters that enable deep tissue penetration, a high detection sensitivity, and a high spatial and temporal resolution. The focus of this project are nanomaterials, which absorb and emit in the shortwave infrared (SWIR) between ~900–2500 nm where scattering, absorption, and autofluorescence of the tissue are strongly reduced compared to the visible and NIR.
Climate and air quality are of fundamental interest worldwide.
Gas metrology provides profound solutions to measurement tasks on climate and air quality, e.g., when greenhouse gases or pollutants are to be quantified.
Metrological capabilities are demonstrated through participation in the framework of the CIPM Mutual Recognition Arrangement (CIPM MRA).
In Germany, this is covered by three institutes: Bundesanstalt für Materialforschung und -prüfung (BAM), Physikalisch-Technische Bundesanstalt (PTB), and Umweltbundesamt (UBA).
Together, the three laboratories realize the unit mole by means of the national gas standards and offer services to their customers that are backed-up by internationally accepted calibration and measurement capabilities (CMCs).
The frequency-domain (FD) method provides an alternative to the commonly used time-domain (TD) approach in characterizing the luminescence kinetics of luminophores, with its own strengths, e.g., the capability to decouple multiple lifetime components with higher reliability and accuracy. While extensively explored for characterizing luminophores with down-shifted emission, this method has not been investigated for studying nonlinear luminescent materials such as lanthanide-doped upconversion nanoparticles (UCNPs), featuring more complicated kinetics. In this work, employing a simplified rate-equation model representing a standard two-photon energy-transfer upconversion process, we thoroughly analyzed the response of the luminescence of UCNPs in the FD method. We found that the FD method can potentially obtain from a single experiment the effective decay rates of three critical energy states of the sensitizer/activator ions involved in the upconversion process. The validity of the FD method is demonstrated by experimental data, agreeing reasonably well with the results obtained by TD methods.
Four donor-acceptor boron difluoride complexes based on the carbazole electron donor and the [1,3,5,2]oxadiazaborinino[3,4-a][1,8]naphthyridine acceptor were designed, synthesized, and systematically spectroscopically investigated in solutions, in the solid states, and dye-doped polymer films. The dyes exhibit an intense blue to red solid-state emission with photoluminescence quantum yields of up to 56% in pure dye samples and 86% in poly(methyl methacrylate) films. All boron complexes show aggregation-induced emission and reversible mechanofluorochromism. The optical properties of these dyes and their solid state luminescence can be tuned by substitution pattern, i.e., the substituents at the naphthyridine unit. Exchange of CH3- for CF3-groups does not only increase the intramolecular charge transfer character, but also provides a crystallization-induced emission enhancement.
Antibacterial photodynamic therapy (a‐PDT) has emerged as a promising non‐invasive therapeutic modality that utilizes the combination of a photosensitive agent, molecular oxygen, and excitation light to generate reactive oxygen species (ROS), demonstrating remarkable activity against multidrug‐resistant bacterial infections. However, the effective use of conventional photosensitizers is significantly limited by a number of their shortcomings, namely, poor water solubility and low selectivity. Herein, we present a novel biocompatible water‐soluble nanocomposite based on hydrophobic tetraphenylporphyrin (TPP) molecules and hydrophilic ternary AgInS2/ZnS quantum dots incorporated into a chitosan matrix as an improved photosensitizer for a‐PDT. We demonstrated that TPP molecules could be successfully transferred into chitosan solution while remaining primarily in the form of monomers, which are capable of singlet oxygen generation. We performed a detailed analysis of the Förster resonance energy transfer (FRET) between quantum dots and TPP molecules within the nanocomposite and proposed the mechanism of the singlet oxygen efficiency enhancement via FRET.
Emission testing of volatile organic compounds (VOC) from materials and products is commonly based on emission test chamber measurements. To ensure the comparability of results from different testing laboratories their measurement performance must be verified. For this purpose, Bundesanstalt für Materialforschung und -prüfung (BAM) organizes an international proficiency test every two years using well-characterised test materials (one sealant, one furniture board and four times a lacquer) with defined VOC emissions. The materials fulfilled the requirements of homogeneity, reproducibility, and stability. Altogether, 41 VOCs were included of which 37 gave test chamber air concentrations between 10 and 98 µg/m³. This is the typical concentration range to be expected and to be quantified when performing chamber tests. Four compounds had higher concentrations between 250 and 1105 µg/m³. The relative standard deviations (RSD) of BAM proficiency tests since 2008 are compared and the improvement of the comparability of the emission chamber testing is shown by the decrease of the mean RSD down to 23% in 2021. In contrast, the first large European interlaboratory comparison in 1999 showed a mean RSD of 51%.
Multi-principal element alloys (MPEAs) are gaining interest in corrosion and electrocatalysis research due to their electrochemical stability across a broad pH range and the design flexibility they offer. Using the equimolar CrCoNi alloy, we observe significant metal dissolution in a corrosive electrolyte (0.1 M NaCl, pH 2) concurrently with the oxygen evolution reaction (OER) in the transpassive region despite the absence of hysteresis in polarization curves or other obvious corrosion indicators. We present a characterization scheme to delineate the contribution of OER and alloy dissolution, using scanning electrochemical microscopy (SECM) for OER-onset detection, and quantitative chemical analysis with inductively coupled-mass spectrometry (ICP-MS) and ultraviolet visible light (UV-Vis) spectroscopy to elucidate metal dissolution processes. In-situ electrochemical atomic force microscopy (EC-AFM) revealed that the transpassive metal dissolution on CrCoNi is dominated by intergranular corrosion. These results have significant implications for the stability of MPEAs in corrosion systems, emphasizing the necessity of analytically determining metal ions released from MPEA electrodes into the electrolyte when evaluating Faradaic efficiencies of OER catalysts. The release of transition metal ions not only reduces the Faradaic efficiency of electrolyzers but may also cause poisoning and degradation of membranes in electrochemical reactors.
The development of new fluorescent organic probes effective in the NIR-II region is currently a fast-growing field and represents a challenge in the domain of medical imaging. In this study, we have designed and synthesized an innovative series of aza-boron dipyrromethenes emitting in the NIR-II region. We have investigated the effect of different water-solubilizing groups not only on the photophysical properties of the compounds but also on their in vitro and in vivo performance after bioconjugation to the antibody trastuzumab. Remarkably, we discovered that the most lipophilic compound unexpectedly displayed the most favorable in vivo properties after bioconjugation. This underlines the profound influence that the fluorophore functionalization approach can have on the efficiency of the resulting imaging agent.
Metabolomics
(2024)
The plant secondary metabolite families of coumarin and 4-hydroxy coumarin have a broad pharmacological spectrum ranging from antibacterial to anticancer properties. One prominent member of this substance class is the synthetic but naturally inspired anticoagulant drug and rodenticide warfarin (coumadin). A vast number of publications focus on the identification of warfarin and its major cytochrome P450-mediated phase I metabolites by liquid chromatography (LC) with mass spectrometry (MS) and tandem mass spectrometric (MS/MS) detection techniques. For the first time, electron ionization (EI) induced high-resolution quadrupole time-of-flight mass spectrometric (HR-qToF-MS) data of in-liner derivatized warfarin and selected hydroxylated species is provided in this study as an alternative to LC-MS/MS approaches. Furthermore, the characteristic fragments and fragmentation pathways of the analyzed methyl ethers are concluded. The obtained data of analytical standards, specific deuterated and 13C-labeled compounds prove inductive cleavage of the acyl or acetonyl side chain, methyl migration, and H-migration, along with consequential inductive cleavage as predominant fragmentation routes. Based on the HR-spectral data, commonalities and differences between the analyzed compounds and fragment groups were evaluated with future applicability in structure elucidation and spectra prediction of related compounds.
Angesichts der zunehmenden Digitalisierung und dem Einsatz datenintensiver Methodiken in der Wissenschaft stehen Forschende vor der Herausforderung, stetig wachsende Datenmengen nachvollziehbar zu dokumentieren, langfristig zu speichern und für Dritte nachnutzbar zu machen. Um diesen Anforderungen gerecht zu werden, bietet sich die Nutzung von Software-Lösungen an, welche Forschungsdatenmanagement mit der digitalen Dokumentation von Laborinventar und Experimenten in elektronischen Laborbüchern (engl. electronic lab notebooks (ELN)) verknüpfen.
The emission of ultrafine particles from small desktop Fused Filament Fabrication (FFF) 3D printers has been frequently investigated in the past years. However, the vast majority of FFF emission and exposure studies have not considered the possible occurrence of particles below the typical detection limit of Condensation Particle Counters and could have systematically underestimated the total particle emission as well as the related exposure risks. Therefore, we comparatively measured particle number concentrations and size distributions of sub-4 nm particles with two commercially available diethylene glycol-based instruments – the TSI 3757 Nano Enhancer and the Airmodus A10 Particle Size Magnifier. Both instruments were evaluated for their suitability of measuring FFF-3D printing emissions in the sub-4 nm size range while operated as a particle counter or as a particle size spectrometer. For particle counting, both instruments match best when the Airmodus system was adjusted to a cut-off of 1.5 nm. For size spectroscopy, both instruments show limitations due to either the fast dynamics or rather low levels of particle emissions from FFF-3D printing in this range. The effects are discussed in detail in this article. The findings could be used to implement sub-4 nm particle measurement in future emission or exposure studies, but also for the development of standard test protocols for FFF-3D printing emissions.
Bacterial adhesion on surfaces of medical, water and food applications may lead to infections, water or food spoilage and human illness. In comparison to traditional static and macro flow chamber assays for biofilm formation studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes, have better environment control and smaller sample requirements.
In this work, a novel microfluidic platform is developed to investigate biofilm adhesion under precisely controlled bacteria concentration, temperature, and flow conditions. This platform central unit is a single-inlet microfluidic flow cell with a 5 mm wide chamber designed and tested to achieve ultra-homogenous flow in the central area of chamber. Within this area, defined microstructures are integrated that will disturb the homogeneity of the flow, thus changing bacterial adhesion pattern.
Here we present the monitoring of bacterial biofilm formation in a microfluidic chip equipped with a microstructure known as micro-trap. This feature is based on a 3D bacteria trap designed by Di Giacomo et al. and successfully used to sequester motile bacteria.
At first, fluorescent particles similar in size to Escherichia coli (E. coli) are used to simulate bacteria flow inside the flow cell and at the micro-trap. The turbulences induced by the trap are analyzed by imaging and particle tracking velocimetry (PTV). Secondly, the model strain E. coli TG1, ideal and well described for biofilm studies, is used to analyze biofilm formation in the micro-trap. Therefore, a stable fluorescent strain E. coli TG1-MRE-Tn7-141 is constructed by using Tn7 transposon mutagenesis according to the method described by Schlechter et al. Sequestering of E. coli cells within the micro-trap was followed using epifluorescence microscopy.
The novel microfluidic platform shows great potential for assessment of bacterial adhesion under various flow regimes. The performance of structural feature with respect to the generation of turbulences that promote or reduce bacterial adhesion can be systematically examined.
The combination of flow analysis and fluorescent strain injection into the microfluidic chip shows that the micro-trap is useful for capturing bacteria at defined positions and to study how flow conditions, especially micro-turbulences, can affect biofilm formation. It represents a powerful and versatile tool for studying the relation between topography and bacteria adhesion.
AbstractSince the 1950s, Warfarin has been used globally as both a prescription drug and a rodenticide. Research has shown that warfarin and other rodenticides are present in the environment and food chain. However, emerging contaminants are subject to degradation by biotic and abiotic processes and advanced oxidation processes. In some cases, detecting the parent compound may not be possible due to the formation of structurally changed species. This approach aims to identify hydroxylated transformation products of warfarin in a laboratory setting, even after the parent compound has undergone degradation. Therefore, the Fenton reaction is utilized to insert hydroxylation into the parent compound, warfarin, by hydroxyl and hydroperoxyl radicals generated by Fe2+/Fe3+ redox reaction with hydrogen peroxide. Using multiple reaction monitoring, a GC–MS/MS method, incorporating isotopically labeled reference compounds, is used to quantify the expected derivatized species. The analytes are derivatized using trimethyl-3-trifluoromethyl phenyl ammonium hydroxide, and the derivatization yield of warfarin is determined by using isotopically labeled reference compounds. The method has a linear working range of 30 to 1800 ng/mL, with detection limits ranging from 18.7 to 67.0 ng/mL. The analytes are enriched using a C18-SPE step, and the recovery for each compound is calculated. The Fenton reaction generates all preselected hydroxylated transformation products of warfarin. The method successfully identifies that 4′-Me-O-WAR forms preferentially under the specified experimental conditions. By further optimizing the SPE clean-up procedures, this GC–MS-based method will be suitable for detecting transformation products in more complex matrices, such as environmental water samples. Overall, this study provides a better understanding of warfarin’s degradation and offers a robust analytical tool for investigating its transformation products.
Oxidative degradation processes of tetrabromobisphenol A (TBBPA), a brominated flame retardant (BFR) in wood, plastics and electronics, were investigated by electrochemistry (EC) coupled online to electrospray ionization mass spectrometry (ESI/MS). Oxidative phase I and II metabolites production was achieved using an electrochemical flow-through cell equipped with a boron doped diamond electrode. Structural elucidation and prediction of oxidative metabolism pathways of TBBPA according to type II ipso-substitution were based on retention time, m/z ratio in negative mode and fragmentation pattern. Using the data obtained through high resolution MS analysis and the identification of single electron transfer (SET) as the initial step of a two-electron oxidation provided the necessary information to propose a mechanism for the electrochemical oxidation of TBBPA. Oxidation reactions involving aromatic hydroxylation and β-scission were the main degradation observed when studying the electrochemical behavior of TBBPA. Computational chemistry experiments using density functional theory (DFT) allowed to identify mono-hydroxylated reaction intermediate and dismissed the mechanism involving two concurrent hydroxylation. TBBPA oxidation products were compared to known metabolites of its biological and environmental degradation confirming the ability of electrochemistry to simulate β-scission reactions.
Plastic pollution is the biggest environmental concern of our time. Breakdown products like micro- and nanoplastics inevitably enter the food chain and pose unprecedented health risks. In this scenario, bio-based and biodegradable plastic alternatives have been given a momentum aiming to bridge a transition towards a more sustainable future. Polyhydroxyalkanoates (PHAs) are one of the few thermoplastic polymers synthesized 100 % via biotechnological routes which fully biodegrade in common natural environments. Poly(hydroxybutyrate-cohydroxyhexanoate) [P(HB-co-HHx)] is a PHA copolymer with great potential for the commodity polymers industry, as its mechanical properties can be tailored through fine-tuning of its molar HHx content. We have recently developed a strategy that enables for reliable tailoring of the monomer content of P(HB-co-HHx).
Nevertheless, there is often a lack of comprehensive investigation of the material properties of PHAs to evaluate whether they actually mimic the functionalities of conventional plastics. We present a detailed study of P(HB-co-HHx) copolymers with low to moderate hydroxyhexanoate content to understand how the HHx monomer content influences the thermal and mechanical properties and to link those to their abiotic degradation. By increasing the HHx fractions in the range of 2 – 14 mol%, we impart an extension of the processing window and application range as the melting temperature (Tm) and glass temperature (Tg) of the copolymers decrease from Tm 165 ◦C to 126 ◦C, Tg 4 ◦C to − 5.9 ◦C, accompanied by reduced crystallinity from 54 % to 20 %.
Elongation at break was increased from 5.7 % up to 703 % at 14 mol% HHx content, confirming that the range examined was sufficiently large to obtain ductile and brittle copolymers, while tensile strength was maintained throughout the studied range. Finally, accelerated abiotic degradation was shown to be slowed down with an increasing HHx fraction decreasing from 70 % to 55 % in 12 h.
With the reduction of large oil spills because of stricter regulations and safety measures, the question of how to manage smaller oil spills arises. Few on-site analytical tools are available for first responders or other law enforcement personnel to rapidly test for crude oil in the early management of localized polluted areas. The approach reported here relies on well-described computer-assisted multivariate data analysis of the intrinsic fluorescence fingerprints of crude oils to build a multivariate model for the rapid classification of crude oils and the prediction of their properties. Thanks to a dedicated robust portable reader, the method allowed classification and accurate prediction of various properties of crude oil samples like density (according to API, the American Petroleum Institute and viscosity as well as composition parameters such as volume fractions of paraffins or aromatics. In this way, autonomous operation in on-site or in-the-field applications becomes possible based on the direct (undiluted and untreated) measurement of samples and a rapid, tablet-operated readout system to yield a robust and simple analytical test with superior performance. Testing in real-life scenarios allowed the successful classification and prediction of a number of oil spill samples as well as weathered samples that closely resemble samples collected by first responders.
In industrialised countries more than 80% of the time is spent indoors. Products, such as building materials and furniture, emit volatile organic compounds (VOCs), which are therefore ubiquitous in indoor air. VOC in combination may, under certain environmental and occupational conditions, result in reported sensory irritation and health complaints. Emission concentrations can become further elevated in new or refurbished buildings where the rate of air exchange with fresh ambient air may be limited due to improved energy saving aspects. A healthy indoor environment can be achieved by controlling the sources and by eliminating or limiting the release of harmful substances into the air. One way is to use (building) materials proved to be low emitting. Meanwhile, a worldwide network of professional commercial and non-commercial laboratories performing emission tests for the evaluation of products for interior use has been established. Therefore, comparability of test results must be ensured. A laboratory’s proficiency can be proven by internal and external validation measures that both include the application of suitable emission reference materials (ERM). For the emission test chamber procedure according to EN 16516, no artificial ERM is commercially available. The EU-funded EMPIR project MetrIAQ aims to fill this gap by developing new and improved ERMs. The goal is to obtain a material with a reproducible and temporally constant compound release (less than 10 % variability over 14 days). Two approaches were tested: the impregnation of porous materials with VOC, and the encapsulation of VOC in polymer microcapsules. Impregnation is performed with help of an autoclave and supercritical CO2. The encapsulation is done by interfacial polymerisation on VOC droplets. For both approaches, synthesis and/or material parameters were varied to obtain an optimal ERM. Findings about the optimisation of ERM generation, as well as performance of the best emission reference materials, will be presented.
Capillary electrophoresis (CE) is a powerful and sensitive tool for speciation analysis when combined with inductively coupled plasma mass spectrometry (ICP-MS); however, the performance of this technique can be limited by the nature of pneumatic nebulizers. This study compares two commercially available pneumatic nebulizers to a newly introduced vibrating capillary nebulizer (VCN) for on-line coupling of CE with ICP-MS. The VCN is a low-cost, non-pneumatic nebulizer that is based on the design of capillary vibrating sharp-edge spray ionization. As a piezoelectrically driven nebulization source, the VCN creates an aerosol independent of gas flows and does not produce a low-pressure region at the nebulizer orifice.
To compare the systems, we performed replicate analyses of sulfate in river water with each nebulizer and the same CE and ICP-MS instruments and determined the figures of merit of each setup. With the CE-VCN-ICP-MS setup, we achieved around 2–4 times lower sensitivity compared to the commercial setups. However, the VCN-based setup provided lower noise levels and better linear correlation from the analysis of calibration standards, which resulted in indistinguishable LOD and LOQ values from the in-house-built VCN-based and commercial setups for CE-ICP-MS analysis. The VCN is found to have the highest baseline stability with a standard deviation of 3500 cts s−1, corresponding to an RSD of 2.7%. High reproducibility is found with the VCN with a peak area RSD of 4.1% between 3 replicate measurements.
We report an analytical methodology for the quantification of sulfur in biological molecules via a speciesunspecific postcolumn isotope dilution (online ID) approach using capillary electrophoresis (CE) coupled online with inductively coupled plasma−mass spectrometry (online ID CE/ICP−MS).
The method was optimized using a mixture of standard compounds including sulfate, methionine, cysteine, cystine, and albumin, yielding compound recoveries between 98 and 105%. The quantity of sulfur is further converted to the quantity of the compounds owing to the prior knowledge of the sulfur content in the molecules. The limit of detection and limit of quantification of sulfur in the compounds were 1.3−2.6 and 4.1−8.4 mg L−1, respectively, with a correlation coefficient of 0.99 within the concentration range of sulfur of 5−100 mg L−1. The capability of the method was extended to quantify albumin in its native matrix (i.e., in serum) using experimentally prepared serum spiked with a pure albumin standard for validation. The relative expanded uncertainty of the method for the quantification of albumin was 6.7% (k = 2). Finally, we tested the applicability of the method on real samples by the analysis of albumin in bovine and human sera. For automated data assessment, a software application (IsoCor) which was developed by us in a previous work was developed further for handling of online ID data. The method has several improvements compared to previously published setups: (i) reduced adsorption of proteins onto the capillary wall owing to a special capillary-coating procedure, (ii) baseline separation of the compounds in less than 30 min via CE, (iii) quantification of several sulfur species within one run by means of the online setup, (iv) SI traceability of the quantification results through online ID, and (v) facilitated data processing of the transient signals using the IsoCor application. Our method can be used as an accurate approach for quantification of proteins and other biological molecules via sulfur analysis in complex matrices for various fields, such as environmental, biological, and pharmaceutical studies as well as clinical diagnosis.
Sulfur is an essential element in living organisms, where it plays important roles in various biological processes, such as protein synthesis, enzyme activity, and antioxidant defense. However, the biological effects of different sulfur species can vary widely, and imbalances in sulfur speciation have been observed in a range of diseases, including cancer, Alzheimer’s disease, and diabetes.1−3 The accurate quantification of sulfur and its species in biological samples requires sensitive and selective analytical techniques. In recent years, separation techniques coupled online with inductively coupled plasma−mass spectrometry (ICP−MS) have emerged as powerful online analytical tools complementary to molecular spectrometric methods for speciation analysis of biological compounds.
External calibration4−9 and isotope dilution (ID)10−15 are common calibration approaches applied for online quantification of sulfur species in complex samples. The ID analysis is advantageous over.
Establishing ZIF‐8 as a reference material for hydrogen cryoadsorption: An interlaboratory study
(2024)
AbstractHydrogen storage by cryoadsorption on porous materials has the advantages of low material cost, safety, fast kinetics, and high cyclic stability. The further development of this technology requires reliable data on the H2 uptake of the adsorbents, however, even for activated carbons the values between different laboratories show sometimes large discrepancies. So far no reference material for hydrogen cryoadsorption is available. The metal‐organic framework ZIF‐8 is an ideal material possessing high thermal, chemical, and mechanical stability that reduces degradation during handling and activation. Here, we distributed ZIF‐8 pellets synthesized by extrusion to 9 laboratories equipped with 15 different experimental setups including gravimetric and volumetric analyzers. The gravimetric H2 uptake of the pellets was measured at 77 K and up to 100 bar showing a high reproducibility between the different laboratories, with a small relative standard deviation of 3–4 % between pressures of 10–100 bar. The effect of operating variables like the amount of sample or analysis temperature was evaluated, remarking the calibration of devices and other correction procedures as the most significant deviation sources. Overall, the reproducible hydrogen cryoadsorption measurements indicate the robustness of the ZIF‐8 pellets, which we want to propose as a reference material.
Luminescence lifetimes are an attractive analytical method for detection due to its high sensitivity and stability. Iridium probes exhibit luminescence with long excited-state lifetimes, which are sensitive to the local environment. Perfluorooctanoic acid (PFOA) is listed as a chemical of high concern regarding its toxicity and is classified as a “forever chemical”. In addition to strict limits on the presence of PFOA in drinking water, environmental contamination from industrial effluent or chemical spills requires rapid, simple, accurate, and cost-effective analysis in order to aid containment. Herein, we report the fabrication and function of a novel and facile luminescence sensor for PFOA based on iridium modified on gold surfaces. These surfaces were modified with lipophilic iridium complexes bearing alkyl chains, namely, IrC6 and IrC12, and Zonyl-FSA surfactant. Upon addition of PFOA, the modified surfaces IrC6-FSA@Au and IrC12-FSA @Au show the largest change in the red luminescence signal with changes in the luminescence lifetime that allow monitoring of PFOA concentrations in aqueous solutions. The platform was tested for the measurement of PFOA in aqueous samples spiked with known concentrations of PFOA and demonstrated the capacity to determine PFOA at concentrations >100 μg/L (240 nM).
The processes of hydrogen reduction of silicon and germanium chlorides under the conditions of high-frequency (40.68 MHz) counteracted arc discharge stabilized between two rod electrodes are investigated. The main gas-phase and solid products of plasma-chemical transformations are determined. Thermodynamic analysis of SiCl4 + H2 and GeCl4 + H2 systems for optimal process parameters was carried out. Using the example of hydrogen reduction of SiCl4 by the method of numerical modeling, gas-dynamic and thermal processes for this type of discharge are investigated. The impurity composition of gas-phase and solid reaction products is investigated. The possibility of single-stage production of high-purity Si and Ge mainly in the form of compact ingots, as well as high-purity chlorosilanes and trichlorogermane, is shown.
Communities worldwide face significant threats from Explosive Remnants of War (ERW), which endanger lives and restrict land usage. From forest fires due to ERWs or in ERW-contaminated areas (e.g., in Jüterbog, Germany) to broader global challenges (e.g., the Ukrainian conflict), the need for efficient detection and removal of these remnants, especially for humanitarian demining, is paramount. Traditional methods, like manual demining, have severe limitations in safety and efficiency. Here, we introduce an innovative solution to these challenges: “Chemosensing Smart Dust.” This technology uses chemoselective dyes that change their fluorescence properties when exposed to explosives like 2,4,6-trinitrotoluene (TNT). Fluorescence-based detection offers superior sensitivity, reduced likelihood of false positives, and enhanced accuracy of explosive detection. Drones, equipped with excitation lasers or LEDs, deploy the Chemosensing Smart Dust over areas of interest and actively detect the fluorescence changes using high-resolution cameras, offering a rapid, safe, and adaptable detection method. Beyond demining, this innovative approach has potential applications in monitoring polluted areas, homeland security, and emergency response.
An overview of personal experience with laser-induced plasma (LIP) will be given. The combination of LIP with laser-induced fluorescence, atomic absorption, Raman spectroscopy and spatial heterodyne spectroscopy for elemental and isotopic analysis will be discussed. Unusual applications of LIP will be covered, such as LIP-based lasers and LIP-based chemical reactors.
This course will provide an introduction to plasma diagnostic techniques. The major focus of the course will be on the discussions of the practical procedures as well as the underlying physical principles for the measurements of plasma fundamental characteristics (e.g., temperatures, thermodynamic properties, and electron number density). Particular emphasis will be placed on inductively coupled plasma–atomic emission spectrometry, but other analytical plasmas will also be used as examples when appropriate. Selected examples on how one can manipulate the operating conditions of the plasma source, based on the results of plasma diagnostic measurements, to improve its performance used for spectrochemical analysis will also be covered. Topics to be covered include thermal equilibrium, line profiles, temperatures, electron densities, excitation processes, micro reactions, pump and probe diagnostics, tomography,
temporal and spatial resolution. Basis of plasma computer modeling will be presented.
Here, we report a comparative study of different sum parameter analysis methods for the extraction of per- and polyfluoroalkyl substances (PFAS) from manufactured consumer products, which can be measured by combustion ion chromatography (CIC). Therefore, a hydrolysis-based extraction method was further developed, which accounts for the addition of hydrolyzable covalently bound polyfluoroalkylated side-chain polymers (SFPs) to the extractable organic fluorine portion of the mass balance proposed as "hydrolyzable organically bound fluorine" (HOF). To test this hypothesis, the method was applied to 39 different consumer products containing fluoropolymers or monomeric PFAS taken from four different categories: outdoor textiles, paper packaging, carpeting, and permanent baking sheets. We also evaluated the method's efficiency by extracting four synthesized fluorotelomer polyacrylate reference compounds. The total fluorine (TF) and extractable organically bound fluorine (EOF) values were measured through CIC using established protocols. The TF values ranged from sub-ppb to %-levels, depending on the compound class. All samples showed results for hydrolyzed organofluorine (HOF) between 0.03 and 76.3 μg/g, while most EOF values were lower (<LOD to 58.1 μg/g). Moreover, the methods were contrasted with the "total hydrolyzable precursor" (THP) assay analyzed using gas-chromatography coupled mass spectrometry (GC-MS), which yielded concentrations of 6:2–10:2 fluorotelomer alcohols (<LOD-568 μg/g) for textile and paper samples. Furthermore, targeted analytical investigation of 25 compounds via liquid chromatography coupled tandem mass spectrometry (LC-MS/MS) was conducted and accounted for significantly lower sum amounts (<LOD-0.98 μg PFAS/g). To estimate the fluorine mass balance of all methods, the fluorine levels of target analytical data were calculated and compared to the sum parameter values and evaluated. Finally, the efficiency of the extraction method was approximated by the recovery analysis of four selected SFP model compounds compared to their TF values, yielding 36.7–74.0% after extraction and 3.8–36.3% after processing the extract for the HOF sum parameter.
The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection.
Der Vortrag beschreibt den Stand der Arbeiten an der BAM, Fachbereich Umweltanalytik zur Entwicklung von Sensoren für die Wasseranalytik. Er stellt die bisherigen Arbeiten da, die ausgehend von ELISAs, zunehmend portable Plattformen wie FPIA und LFIA umfassen. Beas-based Formate werden von mikrotiterplatten-basierten Techniken auf mikrofluidische Lab-on-Chip-Systeme übertragen, die bei geeigneter Miniaturisierung und Automatisierung als Sensorsysteme angesehen werden können. Der Vortrag endet mit einem Blick auf ein laufendes Monitoring-Projekt von anthropogenen Markern in Abwasser und charakterisiert die Treiber, die die Entwicklung von Sensoren für die Wasseranalytik in den letzten Jahren vorantreiben.
Ergot alkaloids form a toxicologically relevant group of mould toxins (mycotoxins) that are among the most common contaminants of foodstuff and animal feed worldwide. Reliable controls are essential to minimise health risks and economic damage. Due to their toxicological relevance, EU limit values for 12 priority ergot alkaloids have been introduced for the first time in 2022 and range from 500 μg/kg in rye milling products down to 20 ug/kg Processed cereal-based foods for infants and young children[1]. High-performance liquid chromatography - mass spectrometry is used to quantify low concentrations of ergots in food, however the European standard analytical procedure cannot be applied due to the lack of isotopically labelled reference standards.
The complex structure of the ergot alkaloids makes a total synthesis extremely challenging, expensive and time-consuming. Therefore, we are focusing on different semi-preparative methods (electrochemistry, organic synthesis, heterogeneous catalysis) to specifically N-demethylate the C8 carbon atom of the lysergic acid moiety. The norergot alkaloid formed is then isotopically labelled using an electrophilic methyl source, i.e. iodomethane or dimethyl sulphate to obtain the specific isotopic labelled ergot alkaloid. Initial experiments have shown that N-demethylation of the ergot alkaloid ergotamine is possible by both electrochemical and wet-chemical organic synthesis. The next step is to improve the previously determined reaction conditions to enable the synthesis of norergotamine on a mg scale for further reactions.
Reliable measurement of the size of polydisperse, complex-shaped commercial nanopowders is a difficult but necessary task, e.g., for regulatory requirements and toxicity risk assessment. Suitable methods exist for the accurate characterization of the size of non-aggregated, stabilized, spherical and monodisperse nanoparticles. In contrast, industrial nanoscale powders usually require dedicated sample preparation procedures developed for the analysis method of choice. These nano-powders tend to agglomerate and/or aggregate, a behavior which in combination with an innate broad particle size distribution and irregular shape often significantly alters the achievable accuracy of the measured size parameters. The present study systematically tests two commercially available nanoscale powders using different sample preparation methods for correlative analysis by scanning electron microscopy, dynamic light scattering, Brunauer–Emmet–Teller method and differential mobility analysis. One focus was set on the sample preparation by embedding nanoparticles in carbon-based hot-mounting resin. Literature on this topic is scarce and the accuracy of the data extracted from cross sections of these particles is unclearly stated. In this paper systematic simulations on the deviation of the size parameters of well-defined series of nanoparticles with different shapes from the nominal value were carried out and the contributing factors are discussed.
The poster describes how molecular biology, especially recombinant expression of proteins, in this case, an enzyme, can underpin developments of biosensors. The fumonisin oxidase produced by the fungus Aspergillus niger (AnFAO) is highly selective for the toxic mycotoxin fumonisin. Its structure and sequence has been published before. We took this information and expressed the enzyme in E. coli. The enzyme proved active and could be employed in an amperometric biosensor for the detection of the mycotoxin.
Immunoassays, based on analyte recognition and capture by highly selective antibodies with high affinity, are intensively used in all fields of laboratory diagnostics and in screen-ings of food and environmental samples. Yet, for many purposes, online sensors are desir-able, and, in principle, all immunoassay tech-niques can be integrated into lab-on-chip set-ups that can work as continuous monitoring devices. Yet, the challenge remains to devel-op platforms and elements that are fit for a quick transition of laboratory microplate as-says to immunosensors.
Interaction of L-phenylalanine with Magnetic Metal-Organic Framework: Electrochemical Analysis
(2023)
As the basic units of proteins, the importance of amino acids in organisms is self-evident and therefore detection of the concentration of amino acids is significant in monitoring human health. For example, patients suffering from phenylketonuria should be able to monitor their phenylalanine (PHE) level in a rapid, decentralized, and affordable manner to avoid high levels of PHE in the body which can lead to a profound and irreversible mental disability. Herein, a magnetic and conductive Iron based metal–organic framework (MOF) is prepared using tetrahydroxyquinone and benzene dicarboxylic acid, dual ligands. The uncoordinated carboxyl groups provided the binding sites for PHE. Physicochemical properties of MOF were characterized by XRD, SEM, DLS and FTIR analyses. The effects of different operational parameters: pH (2, 4, 6, 7.2, 8.6, 10, 12), contact time and MOF concentration were optimized for best properties using cyclic voltametric technique. The 10 µl of 1mg/ml MOF (pH 8.6) in deionized water was used as working electrode on screen-printed gold electrode. The presence of new well-defined oxidation and reduction current peak in electrochemical signal of MOF-modified SPGE sensor vs. Ag/AgCl in phosphate buffer solution (pH 1.9) remarks the quantification of PHE. The analytical calibration curve for PHE showed a linear response with concentration in the oxidation and reduction peak current range from 50 to 1000 µM, with a limit of detection (LOD) of 35.16 µM.
Ergot alkaloids form a toxicologically relevant group of mould toxins (mycotoxins) that are among the most common contaminants of food and animal feed worldwide. Reliable controls are essential to minimise health risks and economic damage. Due to their toxicological relevance, EU limit values for 12 priority ergot alkaloids have been introduced for the first time in 2022 and range from 500 µg/kg in rye milling products down to 20 ug/kg Processed cereal-based foods for infants and young children[1]. High-performance liquid chromatography - mass spectrometry is used to quantify low concentrations of ergots in food, however the European standard analytical procedure cannot be applied due to the lack of isotopically labelled reference standards.
The complex structure of the ergot alkaloids makes a total synthesis extremely challenging, expensive and time-consuming. Therefore, we are focusing on different semi-preparative methods (electrochemistry, organic synthesis, heterogeneous catalysis) to specifically N-demethylate the C8 carbon atom of the lysergic acid moiety. The norergot alkaloid formed is then isotopically labelled using an electrophilic methyl source, i.e. iodomethane or dimethyl sulphate to obtain the specific isotopic labelled ergot alkaloid. Initial experiments have shown that N-demethylation of the ergot alkaloid ergotamine is possible by both electrochemical and wet-chemical organic synthesis. The next step is to adapt the previously determined reaction conditions to enable the synthesis of norergotamine on a mg scale.
Die Nutzung von Sensortechnologien, insbesondere im Bereich der Gasdetektion mit einem Schwerpunkt auf Wasserstoff, spielt eine entscheidende Rolle in verschiedenen Anwendungsbereichen der Wasserstofftechnologie. Sicherheitsüberwachung, Leckdetektion und Prozesskontrolle gehören zu den prominenten Anwendungsgebieten dieser Sensortechnologien. Ein zentrales Ziel ist die Erkennung von freigesetztem Wasserstoff sowie die genaue Bestimmung des Wasserstoff-Luftverhältnisses mithilfe von Gassensoren. Dies ist von entscheidender Bedeutung, um potenzielle Gefahren frühzeitig zu erkennen und angemessene Maßnahmen zu ergreifen.
Ein weiterer Schwerpunkt dieses Beitrags liegt auf der Analytik und der Verwendung zertifizierter Referenzmaterialien in Verbindung mit Metrologie für die Wasserstoffspeicherung. Dies gewährleistet eine präzise und zuverlässige Charakterisierung von Wasserstoff und unterstützt die Entwicklung sicherer Speichertechnologien. Im Rahmen des Euramet-Vorhabens Metrology for Advanced Hydrogen Storage Solutions (MefHySto) wird eine Kurzvorstellung präsentiert.
Der Vortrag stellt zwei zerstörungsfreie Prüfverfahren zum strukturellen Zustandsüberwachung (Structural Health Monitoring, SHM) für Wasserstofftechnologien vor. Insbesondere die Fehlstellenerkennung mittels geführter Ultraschallwellen spielt eine bedeutende Rolle bei der Lebensdauerüberwachung von Wasserstoffspeichern. Ein weiterer Aspekt ist die Anwendung faseroptischer Sensorik zur Schadensfrüherkennung von Wasserstoffspeichern. Diese zerstörungsfreien Prüfverfahren ermöglichen eine präzise und frühzeitige Identifizierung von Schäden, was die Sicherheit und Effizienz von Wasserstoffspeichersystemen entscheidend verbessert.
Im Vorhaben „MARKERIA - Bestimmung von anthropogenen Markerkonzentrationen für die SARS-CoV-2 Quantifizierung mittels eines Hochdurchsatzverfahrens (ELISA)“ geht es um die Bestimmung von Carbamazepin, Diclofenac, Koffein und einer endogenen Gallensäure als potentielle Marker für die Kalibrierung der SARS-CoV-2 Quantifizierung im Abwasser. Es ist ein Teilvorhaben des übergeordneten Projektes ESI-CorA und wird von der BAM im Auftrag des Umweltbundesamtes durchgeführt. Der Vortrag wurde gehalten im Rahmen der Abschlussveranstaltung des Projektes ESI-CorA. Er gab den Projektstand wieder, den UBA und BAM bis dahin erzielt hatten, das SARS-CoV-2 Virus und die anthropogenen Marker in 20 Kläranlagenzuläufen zu bestimmen und miteinander zu korrelieren.
Im Vorhaben „MARKERIA - Bestimmung von anthropogenen Markerkonzentrationen für die SARS-CoV-2 Quantifizierung mittels eines Hochdurchsatzverfahrens (ELISA)“ geht es um die Bestimmung von Carbamazepin, Diclofenac, Koffein und einer endogenen Gallensäure als potentielle Marker für die Kalibrierung der SARS-CoV-2 Quantifizierung im Abwasser. Der Vortrag wurde gehalten im Rahmen der 22. Sitzung des Begleitkreises des übergeordneten Projektes ESI-CorA. Er gab den Projektstand wieder, den die BAM bis dahin erzielt hatte. Die Marker waren in sämtlichen untersuchten Abwasser-Zulaufproben enthalten und zeigten spezifische Trends. Weitere Korrelationen müsse die weitergehende Datenauswertung ergeben.A
Mykotoxine sind sekundäre Stoffwechselprodukte, die von Schimmelpilzen gebildet werden. Sie sind unvermeidliche Lebensmittelkontaminanten und stellen daher ein ernstes Gesundheitsrisiko für Mensch und Tier dar. Aus diesem Grund hat die Europäische Kommission Vorschriften erlassen, die Höchstwerte für Mykotoxine in bestimmten Lebensmitteln vorsehen. Um die gesetzlichen Grenzwerte einzuhalten, müssen in der Lebensmittelindustrie Mykotoxinanalysen der eingehenden Waren durchgeführt werden.
Gegenwärtig umfasst die Analyse zeitaufwändige Probenvorbereitungsschritte, denen in der Regel eine chromatographische Analyse folgt.
Immunoassays ermöglichen eine Vor-Ort-Analyse, aber in der Regel sind für feste Lebensmittelproben lösungsmittelbasierte Extraktionsschritte erforderlich. Da Immunoassays in der Regel nicht mit den hohen Lösungsmittelkonzentrationen kompatibel sind, die üblicherweise für die Mykotoxinextraktion verwendet werden (z.B. Acetonitril oder Methanol), war es das Ziel dieser Arbeit, ein Extraktionsverfahren für die Mykotoxine Deoxynivalenol und Ochratoxin A aus Weizenmehl und Getreide zu entwickeln, das für Immunoassays und -sensoren verwendet werden kann. Vier verschiedene Lösungsmittel, Methanol (10 %), Ethanol (5 %) und Acetonitril (10 %) sowie Milli-Q-Wasser wurden für die Extraktion des Analyten Deoxynivalenol getestet. Um negative Umweltaspekte zu vermeiden und aufgrund der vergleichbaren Extraktionseffizienz von Milli-Q-Wasser gegenüber den anderen Lösungsmitteln, wurde Milli-Q-Wasser als Extraktionslösung im optimierten Extraktionsprotokoll für Deoxynivalenol verwendet.
Es wurden verschiedene Extraktionsbedingungen, wie die Extraktionszeit, das Lösungsmittel-Feststoff-Verhältnis, der Filtrationsschritt, der Zentrifugationsschritt sowie die Zusammensetzung des Wassers untersucht. Auf der Grundlage der Ergebnisse wurde ein Extraktionsprotokoll festgelegt, mit dem Wiederfindungsraten in einem Bereich von x bis x erzielt wurden. Das Extraktionsprotokoll umfasste die Extraktion von 2 g Weizenmehl mit 40 ml Milli-Q-Wasser für 30 Minuten, die anschließende Zentrifugation bei 3000 U/min für 15 Minuten bei 4 °C und die Filtration des Überstands.
The contamination of drinking water with pharmaceuticals represents a severe health risk. In order to monitor the drinking water quality continuously and enable quick countermeasures in case of contamination, novel sensors are required. Here, immunoanalytical methods based on the binding of the analyte to highly selective antibodies can be helpful. In this work, magnetic bead-based immunoassays (MBBAs) have been developed for the detection of two relevant contaminants of drinking water: diclofenac (DCF) and amoxicillin (AMX). In case of the latter, not only the parent drug is of interest in the risk assessment but also its hydrolysis products (HPs). In a comprehensive study, the influence of external factors and intrinsic properties of the water on the rate of hydrolysis was investigated. As the hydrolysis of AMX further impacts the recognition by the antibody, a strategy to analyze samples with unknown hydrolysis degree of AMX was established employing the enzyme β-lactamase in sample preparation. For both analytes, the MBBAs enable the fast quantification with results obtained in less than one hour which represents a major improvement over conventional immunoassays like the enzyme-linked immunosorbent assay (ELISA). Compared to the respective ELISAs with the same antibodies, the MBBAs further exhibit improved analytical parameters such as a broader measurement range and lower limits of detection. Due to the magnetic properties of the beads that serve as a platform for the assays, they are suitable for the mobile and automated detection at the point-of-care. An integrated diagnostic system was designed in which electrochemical detection with chronoamperometry on a microfluidic chip allows for further miniaturization of the system to enable monitoring of the drinking water quality online in water supply pipes at waterworks.
Development of electrochemical antibody-based and enzymatic assays for mycotoxin analysis in food
(2023)
Electrochemical methods are promising to meet the demand for easy-to-use devices monitoring key parameters in the food industry. Many companies run own lab procedures for mycotoxin analysis, but it is a major goal to simplify the analysis. The enzyme-linked immunosorbent assay using horseradish peroxidase as enzymatic label, together with 3,3',5,5' tetramethylbenzidine (TMB)/H2O2 as substrates allows sensitive mycotoxin detection with optical detection methods. For the miniaturization of the detection step, an electrochemical system for mycotoxin analysis was developed. To this end, the electrochemical detection of TMB was studied by cyclic voltammetry on different screen-printed electrodes (carbon and gold) and at different pH values (pH 1 and pH 4). A stable electrode reaction, which is the basis for the further construction of the electrochemical detection system, could be achieved at pH 1 on gold electrodes. An amperometric detection method for oxidized TMB, using a custom-made flow cell for screen-printed electrodes, was established and applied for a competitive magnetic bead-based immunoassay for the mycotoxin ochratoxin A. A limit of detection of 150 pM (60 ng/L) could be obtained and the results were verified with optical detection. The applicability of the magnetic bead-based immunoassay was tested in spiked beer using a handheld potentiostat connected via Bluetooth to a smartphone for amperometric detection allowing to quantify ochratoxin A down to 1.2 nM (0.5 µg/L). Based on the developed electrochemical detection system for TMB, the applicability of the approach was demonstrated with a magnetic bead-based immunoassay for the ergot alkaloid, ergometrine. Under optimized assay conditions a limit of detection of 3 nM (1 µg/L) was achieved and in spiked rye flour samples ergometrine levels in a range from 25 to 250 µg/kg could be quantified. All results were verified with optical detection. The developed electrochemical detection method for TMB gives great promise for the detection of TMB in many other HRP-based assays. A new sensing approach, based on an enzymatic electrochemical detection system for the mycotoxin fumonisin B1 was established using an Aspergillus niger fumonisin amine oxidase (AnFAO). AnFAO was produced recombinantly in E. coli as maltose-binding protein fusion protein and catalyzes the oxidative deamination of fumonisins, producing hydrogen peroxide. It was found that AnFAO has a high storage and temperature stability. The enzyme was coupled covalently to magnetic particles, and the enzymatically produced H2O2 in the reaction with fumonisin B1 was detected amperometrically in a flow injection system using Prussian blue/carbon electrodes and the custom-made wall-jet flow cell. Fumonisin B1 could be quantified down to 1.5 µM (≈ 1 mg/L). The developed system represents a new approach to detect mycotoxins using enzymes and electrochemical methods.
The statistical tool eCerto was developed for the evaluation of measurement data to assign property values and associated uncertainties of reference materials. The analysis is based on collaborative studies of expert laboratories and was implemented using the R software environment. Emphasis was put on comparability of eCerto with SoftCRM, a statistical tool based on the certification strategy of the former Community Bureau of Reference. Additionally, special attention was directed towards easy usability from data collection through processing, archiving, and reporting. While the effects of outlier removal can be flexibly explored, eCerto always retains the original data set and any manipulation such as outlier removal is (graphically and tabularly) documented adequately in the report. As a major reference materials producer, the Bundesanstalt für Materialforschung und -prüfung (BAM) developed and will maintain a tool to meet the needs of modern data processing, documentation requirements, and emerging fields of RM activity. The main features of eCerto are discussed using previously certified reference materials.
Concrete is the most important human-made material because it serves as the basis of our built environment. Since the properties of concretes are dominated by their key compound, cement, devising a way to determine the cement’s origin, known as provenancing, is of great importance for answering different provenance-related questions. These questions range from liability issues when damage occurs to concrete-made structures, to forensic investigations where cement particles are found at crime scenes. This thesis showcases the use of isotope techniques to answer these provenance-related questions. Conventional 87Sr/86Sr and 143Nd/144Nd isotope and elemental ratios consisting of Ca, Sr, K, Mn, Mg, and Ti are used as fingerprints for ordinary Portland cement (OPC) provenancing. The first part of this thesis describes research previously conducted in fingerprinting cementitious materials, providing an overview of provenance studies of cement and the main approaches commonly used. In several studies, the origin of clinker for certain locations was determined via different approaches. However, clinker is an intermediate product, which is available only at the production site and therefore, the practical relevance is rather limited. Furthermore, the use of Sr and Nd isotope systems, together with elemental fingerprints are presented as state of the art in the field. Therein, the principal approach for the overall study is sketched. For the second part of the study, a sample preparation technique for Sr isotopes in Portland cement was developed. The aim was to find the most appropriate sample preparation procedure for cement provenancing and selection was realised by comparing the 87Sr/86Sr isotope ratios of differently treated OPCs with those of the corresponding clinkers. Based on these findings, the third part of the study focused on the measurements of Sr and Nd isotope ratios, together with elemental ratios, to establish a reliable technique for OPC provenancing. The outcomes of this final stage are then used to establish a procedure for fingerprinting cements. This becomes possible with the use of Sr and Nd isotope ratios and geochemical profiles. To perform isotope ratio measurements and obtain reliable data, it was necessary to establish a quality control procedure. Thus, an interlaboratory comparison (ILC) was organised to characterise 87Sr/86Sr isotope ratios in geological and industrial reference materials by applying the conventional method for 87Sr/86Sr isotope ratios. As reference material, four cements (VDZ 100a, VDZ 200a, VDZ 300a, IAG OPC-1), one limestone (IAG/CGL ML-3) and one slate (IAG OU-6) were selected, thus covering a wide range of Sr isotope signatures.
Sr isotope ratio analysis
(2023)
Pb isotope ratio analysis
(2023)
Detector deadtime
(2023)
Isotope Ratio Analysis
(2023)
Here, we elucidate nonclassical multistep crystallization pathways of transition metal phosphates from aqueous solutions. We followed precipitation processes of M-struvites, NH4MPO4·6H2O, and M-phosphate octahydrates, M3(PO4)2·8H2O, where M = Ni, Co, or NixCo1–x, by using in situ scattering and spectroscopy-based techniques, supported by elemental mass spectrometry analyses and advanced electron microscopy. Ni and Co phosphates crystallize via intermediate colloidal amorphous nanophases, which change their complex structures while agglomerating, condensing, and densifying throughout the extended reaction times. We reconstructed the three-dimensional morphology of these precursors by employing cryo-electron tomography (cryo-ET). We found that the complex interplay between metastable amorphous colloids and protocrystalline units determines the reaction pathways. Ultimately, the same crystalline structure, such as struvite, is formed. However, the multistep process stages vary in complexity and can last from a few minutes to several hours depending on the selected transition metal(s), their concentration, and the Ni/Co ratio.
Surface functionalized silica nanoparticles (SiO2-NP) gained great interest in the life and material sciences, as they can be used e.g. as drug carriers, fluorescent sensors, and multimodal labels in bioanalytical assays and imaging applications. They are highly stable, are easily produced and modified on a large scale at low cost and can be labeled or stained with a multitude of sensor dyes. These dye modified particle conjugates have several advantages as compared to conventional molecular probes like enhanced brightness, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, stained nanoparticles can enable the use of hydrophobic dyes in aqueous environments.
Here we present our work on multicolored sensors for the measurement of pH, oxygen and saccharides utilizing amorphous SiO2 NPs.
In recent years, chromium (III) complexes have received a lot of attention as novel near-infrared (NIR) emitters triggered by the report on the first molecular ruby Cr(ddpd)2(BF4)3 with a high photoluminescence quantum yield of 13.7% of its near infrared (NIR) emission band and a long luminescence lifetime of 1.122 ms at room temperature.[1] However, in an oxygen-containing environment, the photoluminescence quantum yields and luminescence lifetimes of these chromium(III) complexes show only very small values. This hampers their application as NIR luminescence labels. This application, that cannot be tackled by conventional deoxygenating approaches, requires suitable strategies to protect the luminescence of the chromium(III) complexes from oxygen quenching. An elegant approach to reduce the undesired luminescence quenching by triplet oxygen explored by us presents the incorporation of these chromium(III) complexes into different types of amorphous, non-porous silica nanoparticles, that can be simply surface functionalized, e.g., with targeting ligands and/or other sensor molecules. In this work, as first proof-of-concept experiments, a set of chromium (III) complexes constituting of different ligands and counter anions, were embedded into the core of silica nanoparticles. Subsequently, the optical properties of the resulting luminescent silica nanoparticles were spectroscopically assessed by steady state and time-resolved luminescence spectroscopy. First results of time-resolved luminescence measurements confirm our design concept of nanoscale NIR emissive Cr(III) complex-based reporters
Protein modifications such as oligomerization and tyrosine nitration alter the immune response to allergens and may contribute to the increasing prevalence of allergic diseases. In this mini-review, we summarize and discuss relevant findings for the major birch and grass pollen allergens Bet v 1 and Phl p 5 modified with tetranitromethane (laboratory studies), peroxynitrite (physiological processes), and ozone and nitrogen dioxide environmental conditions). We focus on tyrosine nitration and the formation of protein dimers and higher oligomers via dityrosine cross-linking and the immunological effects studied.
Engineered nanoparticles (NPs) with various chemical compositions and surface functionalities are routinely fabricated for industrial applications such as medical diagnostics, drug delivery, sensing, catalysis, energy conversion and storage, opto-electronics, and information storage which improve the quality of life and European prosperity. NP function, performance, interaction with biological species, and environmental fate are largely determined by their surface functionalities. Standardized repeatable surface characterization methods are therefore vital for quality control of NPs, and to meet increasing concerns regarding their safety. Therefore, industry, regulatory agencies, and policymakers need validated traceable measurement methods and reference materials. This calls for fit-for-purpose, validated, and standardized methods, and reference data and materials on the surface chemistry of engineered NPs. Here, we present a concept for the development of such standardized measurement protocols utilizing method cross-validation and interlaboratory comparisons (ILCs) with emphasis on both advanced measurement methods such as quantitative Nuclear Magnetic Resonance (qNMR), X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) and cost-efficient, non-surface specific methods like optical assays and electrochemical titration methods.
Engineered and tailored nanomaterials (NM) are of great interest in the life and material sciences, as they can be used, e.g., as drug carriers, barcodes, fluorescent sensors, and multimodal labels in bioanalytical assays and imaging applications. Their performance and safety depend not only on their particle size, size distribution, and morphology, but also on their surface chemistry, i.e., the total number of surface functional groups (FG) and the number of FG accessible for subsequent functionalization with ligands or biomolecules, which in turn determines surface charge, colloidal stability, biocompatibility, and toxicity. It also underlines the importance of validated analytical methods that provide accurate information on these application-relevant physicochemical properties with a known uncertainty. In the case of FG quantification, this calls for robust, fast, inexpensive, and reliable methods which allow for the characterization of a broad variety of NM differing in size, chemical composition, and optical properties.
Methods
Aiming at the development of simple, versatile, and multimodal tools for the quantification of bioanalytically relevant FG such as amine, carboxy, thiol, and aldehyde functionalities, we investigated and compared various analytical methods commonly used for FG quantification. This includes electrochemical titration methods, dye-based optical assays, and other instrumental analytical techniques such as nuclear magnetic resonance (NMR), mass spectrometry (MS), and thermal analysis methods.
Results
Here, we will present examples for different types of NMs and FGs including results from a currently running interlaboratory comparison (ILC) with the National Research Council of Canada (NRC) to pave the road for method standardization.
Innovative aspects
• Surface analysis
• Performance and safety of nanomaterials
• Standardization
Engineered nanomaterials (NM) with their large surface-to-volume ratios and their for some materials observed size-dependent functional properties are of increasing relevance for current and future developments in various fields such as medical and pharmaceutical industry, computing and electronics or food and consumer products. The performance and safety of NM are determined by the sum of their intrinsic physicochemical properties. Especially, the particle surface chemistry, which is largely controlled by the chemical nature and density of functional groups (FG) and ligands, is an important key driver for NM performance, stability, and processibility as well as the interaction of NM with the environment. Thus, methods for FG quantification can foster the sustainable development of functional and safe(r) NM.
Aiming at the development of simple, versatile, and multimodal tools for the quantification of many bioanalytically relevant FG and ligands, we investigated and compared various analytical methods commonly used for FG quantification. This includes electrochemical titration methods, dye-based optical assays, and other instrumental analytical techniques such as nuclear magnetic resonance and thermal analysis methods.
The potential of our multimodal approach for FG quantification was demonstrated for commercial and custom-made polymeric and silica particles of varying FG, used as optical pH sensors. In the future, our strategy can contribute to establish multi-method characterization strategies to provide a more detailed picture of the structure-properties relationship.