Filtern
Erscheinungsjahr
- 2023 (59) (entfernen)
Dokumenttyp
Referierte Publikation
- ja (59) (entfernen)
Schlagworte
- Concrete (5)
- Lithium-ion battery (4)
- Portland cement (4)
- Alkali-activated materials (3)
- Corrosion (3)
- Hydration (3)
- Thermal runaway (3)
- Bitumen (2)
- Building and Construction (2)
- Bus interior materials (2)
- Cement hydration (2)
- Civil and Structural Engineering (2)
- Cone calorimeter (2)
- Durability (2)
- FTIR (2)
- FTIR spectroscopy (2)
- Flame retardancy (2)
- Graphene (2)
- Microstructure (2)
- Multivariate analysis methods (2)
- Natural rubber (2)
- Reliability (2)
- Safety (2)
- Smoke gas emission (2)
- Structural Health Monitoring (2)
- Value of information (2)
- 3-dimensional microscopy (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- Acoustic emission monitoring (1)
- Adsorption (1)
- Ageing (1)
- Ageing behaviour (1)
- Alternative materials (1)
- Analytical Chemistry (1)
- Anisotropy (1)
- Architecture (1)
- Artificial Intelligence (1)
- Asphalt (1)
- Attenuation (1)
- Autonomous underwater vehicles (1)
- Axle sequence (1)
- Açaí fiber (1)
- Battery fires (1)
- Bauwerksüberwachung (1)
- Bayesian updating of stress ranges (1)
- Benchmark (1)
- Bio-based (1)
- Biofilm (1)
- Bioreceptivity (1)
- Boundary element (1)
- Brandversuche (1)
- Bridge (1)
- Bridge resonance (1)
- Brücken (1)
- Building with earth (1)
- Burning behaviour (1)
- Calcined clay (1)
- Calcium sulfoaluminate (CSA) cement (1)
- Calcium sulfoaluminate cement (1)
- Carbonation (1)
- Carbonzugglied (1)
- Cathode active material (1)
- Cement (1)
- Cement-based composites (1)
- Ceramics (1)
- Characterisation (1)
- Circular economy (1)
- Compressed earth (1)
- Compressive strength (1)
- Computational (1)
- Computational Fluid Dynamic (CFD) (1)
- Computer Vision (1)
- Condensed Matter Physics (1)
- Consequences (1)
- Crack Luminescence (1)
- Cyber security (1)
- Cyclic reuse (1)
- DFG SPP 2005 (1)
- DIN tube furnace (1)
- Damage detection (1)
- Debonding Mechanism (1)
- Decarbonisation (1)
- Decision analysis (1)
- Demolition wastes (1)
- Destructive testing (1)
- Developing building materials (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Discrete Element Method (1)
- Domain decomposition methods (1)
- Dripping (1)
- Earth blocks (1)
- Earth masonry (1)
- Electrochemical methods (1)
- Electrochemistry (1)
- Empirical model (1)
- Estimation (1)
- European project (1)
- Expandable graphite (1)
- Expansion (1)
- Explosion limit (1)
- Feuerwiderstand (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Fire (1)
- Fire behavior (1)
- Fire spalling (1)
- Fire statistics (1)
- Flame retardant; (1)
- Flammability (1)
- Flexible polyurethane foam (1)
- Flow depth (1)
- Frost salt attack (1)
- Future‑oriented standards (1)
- Gas emission (1)
- Gas explosion (1)
- General Chemical Engineering (1)
- General Materials Science (1)
- Granular cohesion (1)
- Green facades (1)
- Green urban construction (1)
- Ground vibration (1)
- HAZID (1)
- Hammer impact (1)
- Heat release (1)
- High heat resistance (1)
- Hybrid cements (1)
- Hydration stoppage (1)
- Impact assessment (1)
- Impact loading (1)
- Impinging jet (1)
- Inelastic neutron scattering (1)
- Jacket support structure (1)
- Korrosion (1)
- Large-scale tests (1)
- Lattice Boltzmann Method (1)
- Layered soil (1)
- Limestone powder (1)
- Load identification (1)
- Localized model order reduction (1)
- Low-carbon construction (1)
- Lunar regolith (1)
- Magnesium chloride (1)
- Mechanical properties (1)
- Merkblatt (1)
- Micro-CT scanning (1)
- Middle Pleistocene (1)
- Mitigation (1)
- Model updating (1)
- Modulus of elasticity (1)
- Moisture (1)
- Moisture transport (1)
- Monitoring (1)
- Monitoring-informed inspection and maintenance planning (1)
- Multiple reuse (1)
- Multiscale methods (1)
- Nanocomposite (1)
- Nanocomposites (1)
- Nanosilica (NS) (1)
- Natural fibers (1)
- Netzwerkbogenbrücke (1)
- Non-Destructive Evaluation (1)
- Nondestructive testing (1)
- Obstacles (1)
- Offshore wind turbine (1)
- Optimal sensor placement (1)
- Overland flow (1)
- PFEM (1)
- Polyamide 4.6 (1)
- Polyamide 6.6 (1)
- Polycarboxylate superplasticizers (PCE) (1)
- Polycyclic aromatic hydrocarbons PAH (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Posterior fatigue reliability (1)
- Prestressed concrete bridge (1)
- Probability of Detection (1)
- Proof loading (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Quality (1)
- Rainfall classification (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Rapid procedure for binder extraction (1)
- Real scale test (1)
- Reclaimed asphalt (1)
- Recycled materials (1)
- Recycling (1)
- Reference values (1)
- Reinforcement corrosion (1)
- Rejuvenator (1)
- Relative humidity (1)
- Rheological (1)
- Rheology (1)
- Richtlinie (1)
- Rigid foam (1)
- Risk (1)
- Risk-based design (1)
- Rregulations (1)
- SHCC (1)
- Salt attack (1)
- Sample piece size (1)
- Scattering (1)
- Sensitivity (1)
- Shell buckling (1)
- Shrinkage (1)
- Sintering (1)
- Smoke behavior (1)
- Smoke density (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Softening temperature (1)
- Soil erosion (1)
- Solvent replacement (1)
- Steel corrrosion (1)
- Stone Age (1)
- Strain measurements of wind turbine support structures (1)
- Stress corrosion cracking (1)
- Stress–strain-relation (1)
- Structural health monitoring (SHM) (1)
- Structural reliability (1)
- Sulfate resistant cement (SRC) (1)
- Sulfur containing polymers (1)
- Superplasticizer (1)
- Supplementary cementitous materials (1)
- Surface interactions (1)
- Sustainable binders (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Swelling (1)
- Synergistic effect (1)
- Synthesis (1)
- System identification (1)
- TRC (1)
- Testing (1)
- Throwing-stick (1)
- Train passage (1)
- Train-induced vibration (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UL 94 (1)
- Urban flooding (1)
- Variational Bayesian statistics (1)
- Variational multiscale method (1)
- Vehicle–track interaction (1)
- Water Science and Technology (1)
- Weathering (1)
- Wind (1)
- Wind turbine tower (1)
- Windenergieanlagen (1)
- Wire break (1)
- Wood (1)
- X-ray diffraction (1)
- Zinc (1)
- Zinc stannate (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (59) (entfernen)
Paper des Monats
- ja (11)
Reclassification of bridges, i.e., a change in load rating, using reliability-based methods and a direct update with proof load information has been presented by many authors. However, bridge reclassification has hardly been studied from a decision analytic perspective, i.e., with quantification of the risks and benefits of different classification choices, and the expected benefit gain from proof loading. We derive, explain and exemplify a decision analytic approach for bridge reclassification along with models for (1) elastic and ultimate capacity and their adaptation with proof load information, (2) proof load information with classification outcomes accounting for target reliabilities and, (3) utilities including socio-economic benefits from reclassification. The approach and models are exemplified with a case study based on reclassification of bridges with a low existing classification. Decision rules, for practical use by a highway authority to find the optimal classification, are identified and documented based on: (1) the measurement of the capacity at elastic limit by proof loading, (2) the bridge reclassification benefits, and, (3) the required annual reliability level. From a Value of Information analysis, it is concluded that the proof load information is highly valuable for reclassification in cases of high socio-economic benefits and high reliability requirements.
Future lunar exploration will be based on in-situ resource utilization (ISRU) techniques. The most abundant raw material on the Moon is lunar regolith, which, however, is very scarce on Earth, making the study of simulants a necessity. The objective of this study is to characterize and investigate the sintering behavior of EAC-1A lunar regolith simulant. The characterization of the simulant included the determination of the phase assemblage, characteristic temperatures determination and water content analysis. The results are discussed in the context of sintering experiments of EAC-1A simulant, which showed that the material can be sintered to a relative density close to 90%, but only within a very narrow range of temperatures (20–30 °C). Sintering experiments were performed for sieved and unsieved, as well as for dried and non-dried specimens of EAC-1A. In addition, an analysis of the densification and mechanical properties of the sintered specimens was done. The sintering experiments at different temperatures showed that the finest fraction of sieved simulant can reach a higher maximum sintering temperature, and consequently a higher densification and biaxial strength. The non-dried powder exhibited higher densification and biaxial strength after sintering compared to the dried specimen. This difference was explained with a higher green density of the non-dried powder during pressing, rather than due to an actual influence on the sintering mechanism. Nevertheless, drying the powder prior to sintering is important to avoid the overestimation of the strength of specimens to be fabricated on the Moon.
This paper scopes the specialties of a hazard identification study for large and extra-large unmanned undersea vehicles (UUVs). A generic node/function structure is derived from different large and extra-large UUV designs, partially own vehicle designs from research projects, and partially from commercial vehicles. For each node, a short overview of its components and the proper function or operations is defined. A set of guide words is used to prompt a hazard discussion for each node, which identifies unwanted functions, resulting in potential hazards and unmitigated consequences. Related to the SafeMASS-Report from DNV, this work concentrates on selected topics of the bridge-related function on voyage, control & monitoring, and abnormal situations. For unmanned vehicles without any person on board, these three topics become more important for underwater vehicles with very limited connectivity or temporary disruptions of communication whereby an operator in a remote-control center could only be provided with rough vehicle or mission states. Therefore, vehicle control, whether in hard- or software, must handle most tasks belonging to the considered functions automatically or autonomously. Hence, the most appropriate reactions of the system to unwanted system
behavior must be implemented. This HAZID study could, on the one hand, be used as background for such an implementation, and on the other hand, it is used to verify the implemented actions on the risks and hazards.
Agar gel pads have been used for electrochemical measurements for some time. For zinc in particular, a standard method for measuring the stability of the corrosion product layer is being established. The main interpretation factor is the corrosion product layer resistance RL, as it is easy to determine and interpret. A high corrosion product layer resistance indicates a high level of protection. However, it is not yet known how low the corrosion product layer resistance is for freshly produced zinc samples. As zinc is highly active, it reacts immediately with the environment to form a corrosion product layer, which affects the corrosion product layer resistance. The addition of zinc acetate to the agar gel pads prevents the formation of a surface layer and destroys existing ones.
This makes it possible to measure an almost corrosion product-free zinc surface. This is important in defining the range of corrosion product layer resistance for a protective surface.
We report the selective ring opening copolymerisation (ROCOP) of
oxetane and phthalic thioanhydride by a heterobimetallic Cr(III)K
catalyst precisely yielding semi-crystalline alternating poly(esteralt-
thioesters) which show improved degradability due to the
thioester links in the polymer backbone.
We evaluate masked block-structured grids for ocean domains which allow to represent small-scale geometric features without resorting to very small blocks or excessive mesh resolution. The considered approach aims to combine the geometric flexibility of unstructured meshes with the computational efficiency of stencil-based discretizations and is implemented and tested in a quadrature-free discontinuous Galerkin shallow water solver. We investigate the accuracy and the computational performance of the scheme on a range of realistic ocean domains meshed with blocks of different size and provide some comparisons to results obtained on unmasked block-structured grids and unstructured meshes.
Impact resistance of reinforced concrete (RC) structures can be significantly improved by strengthening RC members with thin composite layers featuring high damage tolerance. Indeed, to limit the well-known vulnerability of cement-based materials against impact loading, the synergistic effects of short fibres and continuous textile meshes as hybrid reinforcement has been proved to be highly beneficial. This paper addresses the characterisation of novel cement-based hybrid composites through accelerated drop-weight impact tests conducted on rectangular plates at different impact energies. Two distinct matrices are assessed, with particular interest in a newly developed limestone calcined clay cement (LC3)-based formulation. Important parameters quantifying energy dissipation capability, load bearing capacity and damage are cross-checked to compute the ballistic limit and estimate the safety-relevant characteristics of the different composites at hand. Although textiles alone can improve the damage tolerance of fine concrete to some extent, the crack-bridging attitude of short, well-dispersed fibres in hybrid composites imparts a certain ductility to the cement-based matrices, allowing a greater portion of the textile to be activated and significantly reducing the amount of matrix spalling under impact.
Information on the condition and reliability of an offshore jacket structure provided by a vibration-based structural health monitoring system can guide decisions on inspection and maintenance. When selecting the sensor setup, the designer of the monitoring system must assess its overall benefit compared to its costs before installation. The potential benefit of continuously monitoring the dynamic response of a jacket structure can be formally quantified through a value of information analysis from Bayesian decision theory. In this contribution, we present a framework for optimizing the placement of vibration sensors on offshore jacket structures by maximizing the value of information of the monitoring system. To solve the resulting discrete optimization problem, we adapt a genetic algorithm. The framework is demonstrated in a numerical example considering a redundant jacket-type steel frame. The numerical study shows that monitoring the vibration response of the frame is beneficial. Good sensor setups consist of relatively few sensors located towards the upper part of the
frame. The adapted genetic algorithm performs similarly well as established sequential sensor placement algorithms and holds substantial promise for application to real jacket structures.
In this article, a partial selection of experiments on enhancing the impact resistance of structural components with non-metallic, textile-reinforced concrete is discussed. The focus is on the experimental investigations in which the impact resistance of thin, textile-reinforced concrete plates is characterized. The article discusses the materials, fabrics and test setup used. For the experimental work, a drop tower from the Otto Mohr Laboratory, which belongs to the Technische Universtät Dresden, was used. Furthermore, the experimental results are presented and evaluated using different methods. Based on the collected data, a suitable approach to determining the perforation velocity of an impactor through the investigated thin, textile-reinforced concrete plates is shown.
Polyamide 4.6 (PA46) is a high-heat-resistant polymer, but it has no dripping resistance under fire. Three commercial grades of PA46 are investigated under UL 94 vertical fire test conditions. Their performances are discussed based on the materials’ structural, thermal, and rheological properties. PA46 presents flaming drops, whereas dripping is prevented in the flame-retarded PA46.
Friction-modified PA46 has increased flaming dripping. Temperature profiles of the specimens under fire and the temperature of the drops are measured by thermocouples. A UL 94 vertical test configuration consisting of two flame applications is designed to assess the quantitative dripping behavior of the set of materials by the particle finite element method (PFEM). Polymer properties (activation energy and Arrhenius coefficient of decomposition, char yield, density, effective heat of combustion, heat of decomposition, specific heat capacity, and thermal conductivity) in addition to rheological responses in high temperatures are estimated and measured as input parameters for the simulations. The dripping behavior obtained by simulated materials corresponds with the experimental results in terms of time and drop size. A consistent picture of the interplay of the different phenomena controlling dripping under fire appears to deliver a better understanding of the role of different materials’ properties