Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (7)
- Vortrag (4)
- Zeitschriftenartikel (3)
- Posterpräsentation (3)
Sprache
- Englisch (17)
Schlagworte
- Gamma radiation (17) (entfernen)
Eingeladener Vortrag
- nein (4)
Impact of gamma radiation on transmission of a commercial Cytop polymer optical fibre (Lucina, Asahi Glass Company) is investigated. Spectral dependence of radiation induced attenuation in the investigated fibre is measured in the VIS-NIR spectral region. Besides attenuation increase, radiation is found to increase fibre susceptibility to water as well. While pristine Cytop fibre is rather humidity insensitive, strong humidity related absorption in the NIR region is observed after fibre irradiation. Selective irradiation of separate fibre sections is proposed as a way of fibre humidity sensitization and quasi-distributed water detection is demonstrated using optical time domain reflectometry at 1310 nm.
Impact of gamma radiation on transmission of a commercial Cytop polymer optical fibre (Lucina, Asahi Glass Company) is investigated. Spectral dependence of radiation induced attenuation in the investigated fibre is measured in the VIS-NIR spectral region. Besides attenuation increase, radiation is found to increase fibre susceptibility to water as well. While pristine Cytop fibre is rather humidity insensitive, strong humidity related absorption in the NIR region is observed after fibre irradiation. Selective irradiation of separate fibre sections is proposed as a way of fibre humidity sensitization and quasi-distributed water detection is demonstrated using optical time domain reflectometry at 1310 nm.
We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core.
We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core.
Gamma radiation induced effects in perfluorinated polymer optical fibers for sensing applications
(2015)
Radiation induced attenuation in perfluorinated polymer optical fiber was investigated as a potential mean for online. in situ gamma radiation monitoring. Spectral dependence of radiation induced attenuation was measured in the visible and near infrared range. Attenuation spectrum exhibits sharp increase both towards the ultraviolet and infrared side of the spectrum with 3 distinct peaks around 1400 nm. The fiber sensitivity to gamma radiation was further evaluated at two commonly used IR wavelengths (1310nm and l550nm} by pre- and post-irradiation optical time-domain reflectometry measurements. The examined fiber is sensitive up to lOO kGy of total absorbed dose with only minor saturation towards the large dose values. The influence of gamma radiation on the fiber mechanical properties was studied as well. Up to the maximal dose of 100 kGy, no significant deterioration of fiber strength and elasticity was observed.
We have measured for the first time the shift of the Bragg wavelength and other parameters of fibre Bragg gratings (FBGs) exposed to radiation at different wavelengths up to a dose of 100 kGy. The results show that the FBG sensitivity to radiation increases from 820 nm to 1516 nm so that FBGs with higher Bragg wavelength, e.g. 1.55 µm, are good candidates for high dose radiation sensing: no saturation was observed up to 100 kGy and the measured wavelength shift was fairly independent on the radiation dose rate.
The paper presents the first complex study of Gamma radiation effects on a low-loss perfluorinated polymer optical fiber (PF-POF) based on Cytop® polymer. Influence of gamma radiation on fiber’s optical, mechanical and climatic performance is investigated. The radiation-induced attenuation (RIA) in the visible and near-infrared region (0.4 μm-1.7 mm) is measured and its origins are discussed. Besides attenuation increase, radiation is also shown to decrease the thermal degradation stability of the fiber and to increase its susceptibility to water. With regard to complex fiber transmission performance upon irradiation, the optimal operation wavelength region of PF-POF-based systems intended for use in Radiation environments is determined to be around 1.1 μm. On the other hand, the investigated fiber holds potential for low-cost RIA-based optical fiber dosimetry applications with sensitivity as high as 260 dBm⁻¹/kGy in the visible region.